Toolbar button doesn't work

Acobat Pro 7.10, WinXp, sp. 2.
My Acrobat GUI isn't in English, so I will try to explain.
In the toolbar "Files" the search button with the binoculars graphic doesn't work. When clicking it nothing happens and Acrobat stops to work.
The toolbar "Search", the one with the text field, works OK.

Hi
i am having the same problem.when i click on last page buttom it ll shows some parameters are missing.can any body help me??????

Similar Messages

Delete Button doesn't work

I have 2 accounts in my Inbox. When the Inbox is highlighted in the Source list ( as opposed to highlighting one of the 2 .Mac accounts) the Delete button works fine when highlighting a message that will be moved to the Trash. However, when an individual account is highlighted and I want to move a messsage to the Trash, the Delete button won't work. Any thoughts ?

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Table delete button doesn't work with Virtual Forms

I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

The back button doesn't work for some websites after downloading version 4.0

I recently downloaded firefox version 4.0. Upon downloading it I had a few issues occur with my browser. One issue was that all of my bookmarks that were on my toolbar disappeared. Also, when I visit a website and am browsing through it, if I want to go back to a previous page the back button doesn't work properly. Instead of sending me back to the previous page I was viewing it sends me all the way back to the home page or wherever I started on that website. This problem basically affects all websites that I visit. I would like to uninstall the new version of firefox and just go back to my old one if that's possible? Thanks

To respond to your comments first of all, the Bookmarks toolbar has been removed in Firefox 4.0
The back button should work as it normally does, but you can also right click it and select it from the list.
To revert to a previous version of Firefox, download v3.6.16 from here: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16]
Then uninstall Mozilla Firefox 4.0 choosing to keep your bookmarks, customizations etc.
Finally run the Firefox installation file you downloaded earlier.

After Yosemite upgrade Pin it button doesn't work

I just upgraded to Yosemite. Now my Pin it button on Safari's toolbar just doesn't work. What happened? What can I do?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

Hi,
thanks for your answer.
The Size of all disks is: 6 x 4 TB.
In the Pool are 5 x 4 TB plus 1 x Hot Spare.
It comes up to about 14,6 TB of Data formatable.
But tried it also with just 3 x 4 TB to see if it works.
I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine.
Here the results of my tests:
1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity.
new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only.
I added a screenshot:
Here you see my storage pool, and I added 3 virtual disk.
1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do.
About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD.
This is what properties shows on this volume. Always RAW.
I also tried Software Raid5 within the server.
This also worked fine. So really only parity.
Thanks
Patrick

My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

Volume and Power button doesn't work..how do I fix?

My son's volume buttons or the power button doesn't work. Is there something I can do to fix these issues?

Try the following to rule out a software problem.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

"Submit to SAP" Button doesn't work

Hi to all,
I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url] seems not to work. Where can I find it?
Thank you very mich,
Enrico

Hi Enrico,
You can download it from the below link:
http://www.esnips.com/web/arafatfNewFolder/
Let me know once you are done so that I will delete the link.
Regards,
Arafat

Can't Add Credit Card (submit button doesn't work)

Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
If it helps, I have the Palm Pre, I'm with O2 (UK).
Can anyone help?
Post relates to: Pre p100ueu (O2)

This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

My home button doesn't work the first time I press it, but the second time. This is very annoying. Why is it doing this?

- Try a reset. It cures many ills and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
-If a hardware problem see:
fix for Home button

HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works. At Step 11, I clicked Home Sharing Import button doesn't work.

Help! I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works. I followed the steps in http://support.apple.com/kb/HT4527 to the letter. At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer. No matter what I try, the Import button doesn't work. There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import. The Settings button is clickable but the Import button isn't even live. In other words, I can see it but not click on it. I have double-checked my firewall and it is not the problem. How can I get the Import button to work?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Toolbar button doesn't work

Similar Messages

Maybe you are looking for