Toolbar customization doesn't work
So, I open Firefox and customize the toolbar by adding/removing or rearranging some of the buttons. I exit customization and quit Firefox. I reopen Firefox and NONE of the changes I have made to the toolbar appearance are kept.
You can check for problems caused by a corrupted <i>xulstore.json</i> file and delete the <i>xulstore.json</i> file in the Firefox profile folder.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Try to reset the <b>browser.uiCustomization.state</b> pref on the <b>about:config</b> page via the right-click context menu.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can also check for problems with preferences.
Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Similar Messages
-
Exit Customize doesn't work - other questions...
Firefox updated to Beta 29 (i didn't do it x_x) and everything is confusing me right now. Actually pissing me off to be honest. I was playing around this new, tried to customize it but didn't work. I followed this page and nothing. https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars the Exit Customize doesn't work at all. I have to quit firefox using Alt+F4 and start all over.
So, that doesn't work for me. How do I go back to the previous version of Firefox or how do I undo this Beta 29 thing? I really don't like it.You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Acobat Pro 7.10, WinXp, sp. 2.
My Acrobat GUI isn't in English, so I will try to explain.
In the toolbar "Files" the search button with the binoculars graphic doesn't work. When clicking it nothing happens and Acrobat stops to work.
The toolbar "Search", the one with the text field, works OK.Hi
i am having the same problem.when i click on last page buttom it ll shows some parameters are missing.can any body help me?????? -
I can only see the contents of my bookmarks toolbar via History ⟶ Show All History. And I can't customize the toolbars because I can't bring up the dialogue box.
I'm also having trouble with the sidebar:
Two things I can't get to show in the sidebar are Bookmarks and History (View ⟶ Sidebar ⟶ Bookmarks and View ⟶ Sidebar ⟶ History). The shortcuts don't work either.
Two things I can get to show in the sidebar ScrapBook and Pocket, however, I can't close the sidebar via the top right cross, but have to go via the menu: View ⟶ Sidebar ⟶ Pocket / ScrapBook.
List of installed Add-ons:
Adblock Plus
Add-on Compatibility Reporter
AddThis
British English Dictionary
Clearly
DivX Plus Web Player HTML5
Evernote Web Clipper
Hootsuite Hootlet
Pinterest Right-Click
Pocket
Public Fox
ScrapBook
Troubleshooter
Firefox 21.0 beta channel
Mac OS X Version 10.7.5Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file -
I have 2 accounts in my Inbox. When the Inbox is highlighted in the Source list ( as opposed to highlighting one of the 2 .Mac accounts) the Delete button works fine when highlighting a message that will be moved to the Trash. However, when an individual account is highlighted and I want to move a messsage to the Trash, the Delete button won't work. Any thoughts ?
It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?
-
Table delete button doesn't work with Virtual Forms
I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?
-
After Yosemite upgrade Pin it button doesn't work
I just upgraded to Yosemite. Now my Pin it button on Safari's toolbar just doesn't work. What happened? What can I do?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Firefox 4 Minefield (firefox-4.0rc1.tar)
Fedora 14It is possible that the file that stores details of toolbar customizations is corrupt, for details on fixing that see https://support.mozilla.com/kb/Toolbar+keeps+resetting
-
IC WebClient telephony toolbar doesn't work in CRM 7.0 EHP2
Hi,
I've a issue with IC webclient telephony toolbar, I comment:
After upgrading SAP CRM 7.0 to SAP CRM 7.0 EHP2, the IC webclient telephony toolbar doesn't work.
I have seen:
1.- When I use “Dial Pad” to call in CRM 7.0 EHP2 (the current version), the message is sent to another session:
_SEND(CL_SAM_SESSION_QUEUE_SENDER)
After sentence (line 28): r_queue = m_session_queue_receiver->get_queue( ).
“r_queue” is initial, for this reason the message is sent to another session.
And when running http_client->receive (line 101), the system hangs because the request is not completed.
I have seen that the response queue (r_queue) is initial because the instance of CL_SAM_SESSION_QUEUE_CNTRLER=>S_SESSION_QUEUE_RECEIVER is initial. For this reason the object is created, method: CONSTRUCTOR(CL_SAM_SESSION_QUEUE_RECEIVER), but parameter “runtime” is initial; therefore the response queue isn't generated.
2.- But, I have seen that if we have used “Dial Pad” to call in CRM 7.0 (the previous version), the message is sent to the same session:
_SEND(CL_SAM_SESSION_QUEUE_SENDER)
After sentence (line 28): r_queue = m_session_queue_receiver->get_queue( ).
The “r_queue” is equal to “s_queue”, for this reason the message is sent to the same session.
In this last case, the request is ok and the call succeeds.
In both case the request is HTTPS protocol.
Does anyone know what could it be?
Thanks and regards,
RocioHi,
Perhaps SAP Note 1640673 could be applicable in this case.
Regards,
Srikishan -
My callout toolbar stopped working abruptly. Restarted computer. Still doesn't work - how do I get the tool back?
The tool is called a “callout” note. It places a text box with a leader. It’s been working just fine until suddenly it stopped working and I get an error message saying “desired operation cannot be performed on this object”. It doesn’t matter where I try to place the callout. It simply stopped working. I have tried restarting Acrobat. I have restarted my computer. I have used multiple files to ensure the issue isn’t with a corrupted file. Nothing works. The tool simply stopped working.
-
Toolbar doesn't work in Browser
Hi,
I have a student on a Windows 7 operating system, with the latest version of Adobe Reader X. When she tries to view a pdf in the browser (latest Firefox or Internet Explorer) with form fields, the majority of icons on the toolbar do not work. Clicking the print icon, nothing happens. Clicking the icons to fit window width do not work. Clicking the down arrow to show next page doesn't work, etc.
Has anyone experienced this and enabled a cure?
David.To repair do this:
1. Go to START->Control Panel->Uninstall a Program
2. Select Adobe Reader X(10.1.2) -> right-click->change> select the first option which mentions"Repair ...."
Can you make sure in the step 2 that mentions adobe reader X(10.1.2) and no other version?
Are toolbars working if you open PDF directly using Reader X? -
When I customize my presenter display so that I can see the time and the next slide on my screen, it doesn't work. I get just the normal view on both. Any ideas?
In Keynote Presenter Display Preferences ensure that Alternate Display: "Use alternate display to view presenter information" is checked
If using a laptop such as a MacBook Pro, toggle the Dual Display Key (typically F7 - has two rectangles on the key) to switch views
It is probably one or both of those causing your problem.
Good Luck. -
I have been using FIREFOX since a long time back and am quite happy with FIREFOX 4.
But a little uncanny situation since release of FIREFOX RC is that 'Reload which used to come under view option is no longer visible,but appears as an icon(button) in toolbar...which sometimes doesn't work(becomes blur and sometimes firefox hangs)'.
Please try to fix it if its only my problem or include it in next release.Thanks!I have been using FIREFOX since a long time back and am quite happy with FIREFOX 4.
But a little uncanny situation since release of FIREFOX RC is that 'Reload which used to come under view option is no longer visible,but appears as an icon(button) in toolbar...which sometimes doesn't work(becomes blur and sometimes firefox hangs)'.
Please try to fix it if its only my problem or include it in next release.Thanks! -
I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer
Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair -
Customizing the toolbar doesn't work
I have used "View>Toolbars>Customize" to put a "New Tab" icon on the navigation toolbar. This has worked for weeks and weeks, putting on a new tab when I have clicked on it. Suddenly, for no apparent reason, it no longer works and neither does the '+' at the right of a tab.
Could someone tell me how to get the "New Tab" feature working again, pleaseGo to the Customize menu you mentioned already again and then in the panel which opens, click the button called '''Restore Default Set'''. Then click "'''Done'''".
You should be able to drag the '''+''' sign back to the toolbar to create a button when you open the Customize menu again afterwards.
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
Thanks.
Maybe you are looking for
-
Have some problem with Ad Mediator!
Hello eveyone , I'm using Ad Meditor for display advertisement on window phone 8.1 XAML... Someone I got error "AdSdkError by MicrosoftAdvertising ErrorCode: RefreshNotAllowed ErrorDescription: Refresh may not be called when the AdControl is not visi
-
The MOF Compiler could not connect with the WMI server
I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message: "The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with
-
Space which isn't there prints in a word
Some time back I produced a brochure for a friend in AW Draw. Some more copies are needed and I have changed from inkjet to laser printer (both Epson: Stylus C70 to Acculaser C2600). When I print one word now has a rogue space in it (word = 'large' w
-
SQL 2005 Server Agent not starting job
Apologies if this question has been asked elsewhere on these forums, I've had a search around and have not been able to find something with the same issues. Last year I took over management of a SQL server (SQL2005 on a Server 2003 R2 O/S), as part o
-
Quest about a gui i'm trying to make that acts as a shell for jar command?
I try to create a jar file from a whole directory and the program locks up. It only locks up if there is a another directory inside that directory that is being archived. I added a System.out.println(command) to see if the command being sent is the c