Toolbar not linking to pages

Hello:
I made a site and the toolbar that is supposed to link to the pages works in iWeb, but once it is published it doesn't work.
If I am not explaning myself well enough, go to www.twitteroutfitter.com and try clicking on and of the "links" at the top (FAQ, Estimates, etc).

Did you create the navigation bar yourself - so is it text based? If so, did you remember to go and create the hyperlinks for the pages? If not, you need to do this via the Inspector and then click on Hyperlink.
If it is the original navigation menu then double check that there are no text boxes overlapping each other. You need to check in iWeb that his is not the case - if it is so, then the published site does not always work. I see that you have an image quite close to it, so check that this is not covering up the nav bar and it should then work.

Similar Messages

Multi-page pdf not linking properly

I have a 6-page interactive indd template that I have been using for months without any issues (well, not these at least), but recently it has been not linking multi page pdfs properly. The pdf that I use is always saved from illustrator cs6 and correlates page to page with the indesign file; page 1 in the pdf links with page 1 in the indd and so on... The issue I am having is that almost every other time I link the file up it behaves differently. Sometimes it will link one page of the pdf to all of the pages of the indd while showing that they are linked to different pages, other times it will not show up at all on the pages, but will show that it is linked in the links panel. Sometimes it will only link one of the pages up and leave the other 5 blank or it will link the pages up with some sort of transparency...
Now, I am not sure if this is a problem with Illustrator or Indesign because of another symptom: Sometimes when I save the file as a pdf it saves as if it is not a multi-page pdf with different content on every page, but rather a multi-page pdf with every page being a zoomed-out view of all of the artboards together but with only some of the content showing (only artboard 3 and 4, only artboard 6 and half of 1) when it is opened in acrobat. Also, sometimes the pdf when viewed in acrobat looks perfect, but when linked it only does a few of the pages in indesign.
Long story short, this doesn't make any sense... I know this is hard to follow and I don't understand why or how it is happening because it seems that every time has a different issue.
I know that you'll probably have questions and I’ll do my best to answer them, but I'm afraid that uploading files for samples won't work because there appears to be nothing wrong with the files themselves... just the links and/or export.
Win7, CS6 , 12 gigs RAM, i5

I have been using this method successfully for quite some time with these exact files, only in the last few days has this problem shown up.
When I originally made the template in indesign, I imported the pdf, showed import options, and linked the pages to the same page number in the pdf. 1 to 1, 2 to 2, etc. My original thought was that this setting had been lost, so deleted the linked pdf and imported it again to try to get the 1 to 1 link. However, that did not change anything and I noticed that the page that shows up by itself in the pdf is almost always page 2, not page 1. If the page-to-page connection had been lost, all of the pages in indesign would be linking to page 1 as is the default behavior for linked pdfs.
Also, I thought that the save issue would be on the illustrator side too, so I tried resaving it but that didn't work either. The only way that I can get the file to work is if I remake it completely and save over the old file.
Now, I know that you're most likely thinking that this is an illustrator issue, but I don't think that it is one or the other, but rather both of them. The screenshots that I attached above are not the only way this error manifests itself. Sometimes the pdf looks right in acrobat, but once it is linked it displays with a transparency, shows only a few of the pages, or shows none at all.
I'm probably going in circles here, but I cannot figure out which program is the cause of the error or if there are two different issues that are happening at the same time.

Adober Reader 8.1.2 will not open new page links to .pdf file

Since upgrading to version 8, I cannot open a pdf file (from IE) if it opens in a new window. It opens local files, and links on pages that go directly to the pdf file, but not if the link opens the file in a new window. This means that I cannot open such things as my VISA statement, etc. What now?
I have Windows XP on a Dell desktop. If it makes any difference, I also have Adobe Pagemaker 7.0 and Adobe Photoshop Elements 4.0 loaded on this computer.
I really need this to work.
Thanks.

Nothing showed in the Event Viewer log. However, just to be thorough:
1. I uninstalled reader 6.0.1 and rebooted. (all pdf became unassociated)
2. I deleted any acr*.tmp anywhere on my computer.
3. I deleted The 6.0 folder from the application updates path
4. I deleted the 6.0 folder from my install path.
5. I deleted the Adobe folder from my temp directory.
6. I ran CCleaner, cleaned app files and registry and repeated.
7. I rebooted and repeated step 6.
8. I opened Event Viewer, backed up and cleared all events from the log.
9. I installed 8.1.2 (all pdf became associated with Acrobat Reader)
10. Under Event Viewer/Application the event log displays: Product: Adobe Reader 8.1.2 -- Installation operation completed successfully.
11. Under Event Viewer/System the event log displays: The Windows Installer service entered the stopped state.
12. I tried to launch: the shortcut, a pdf and the exe file.
13. There are no additional events added to any level of the event log.
14. There is no indication of activity from Reader in the Task Manager: Applications or Processes. It never appears in either.
As a final note, I know the 8.1.2 install file is not corrupted because I copied it to another computer where it installed and runs just fine.

How do I create text flow in Pages 5.1 if text boxes do not link?

Hi Everyone,
Is there any way Pages 5.1 enables text to flow between text boxes if the text boxes do not link? Thanks!

Like I said, Peter, new to the forum. As for the app store I assumed the new version would, if anything, enhance the functionality of older versions. I obviously made the wrong assumption, both there and thinking that Apple might be paying attention to what is going on here. If I seem upset, it's because I just spent a bunch of money on a new system and am slowly discovering the many small ways in which Apple's software (and hardware) is being dumbed down. Seems like now that Jobs is gone and Apple's stock is through the roof, the cost-cutter... I mean stock-inflators are calling the shots.

Domain name does not link to index page.

Having a lot of difficulty publishing to FTP, have researched many forums and unable to find answers. Whether I publish to FTP via iWeb or Cyberduck, my domain name danbaileymusic.com shows a 403 Forbidden Error. However if i type in danbaileymusic.com/index or /music, ect it loads. The whole site functions fine, but the domain name does not link to the index page.
In Cyberduck all permissions have been turned on. Also I noticed that when publishing to a local folder, iWeb creates a folder "danbailey" and an index.html. This index page does not work in Cyberduck, however the index page that is WITHIN the folder "danbailey" does work, but it doesn't link to the domain name.
Please help! I've been working on this for weeks and cannot figure out why the domain name is not working!

It only creates the page names with first letter capitalized (as in Index not index) I have tried changing it from the sidebar and from the Page Name in the Inspector -- typing "index" comes back as "Index" It's easy enough to change the "I" to an" i" at the file level (which did fix the problem) but doing this also breaks all the links I have to "Index.html" Fixing this on the creation side would be ideal. Thoughts?
I am using iWeb '09 v.3.0.1 if that makes a difference

Adobe PDF files will not display when called via a link in page (FF 4.01)

adobe PDF files will not display when called via a link in page.
This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)

[moved to the Adobe Reader (desktop) forum]

New page unexpectedly loses ability to go BACK to previous page after clicking on a link in page (not consistent), why?

Firefox 4.0 Vista 32 bit
I will have a tab open, and click on a link, new page loads. The Back and Forward buttons do not work. Usually it shows in history (unless I opened too many pages before clicking on link). This has happened several times.
It is not consistent - one time I used search bar and opened a Yahoo search page - clicked on search link and when I wanted to go back to look at another search link from the previous page- page would not load (BACK button dead). I clinked search again, clicked on another link and that time it allowed me to return to the previous page???
I am about ready to go back to previous version.
Thank you.

It's a good idea to try disabling Flash completely and see whether the problem continues. If it does, then my guess is incorrect. To test that, open this tab:
orange Firefox button (or Tools menu) > Add-ons > Plugins category
Here you can locate Shockwave Flash and use the Disable button. Keep this tab open for easy access when doing your test.
''If your test confirms that Flash is causing the problem,'' then the other thread has two suggested workarounds. The first is simple to understand (keep some Flash running at all times) but may be inconvenient to do all the time. The second is trickier because it requires editing a file in (or creating and then dragging a file into) a system folder. Fortunately you only need to do it once.

Links not linking on one page. Differences in Firefox, Camino & Safari...

Hello, I doubt this is a new question... My web site is hearth2hearth.com My problem(s) is/are: The links at the bottom of the "Who's in the Kitchen?" page (email & [email protected]) do not work when published. These same links on all other pages do work. On this same page there is a photo and a caption beneath it that are both links to another site. Neither work. All links to other pages on my site (at the top of all pages) work fine. However (a separate problem) some of those links at the top of the pages are of a different color than I chose, and/or are underlined when I deselected Underline in the Format section of the Link Inspector. I have looked at the site on Firefox, Camino & Safari and there are differences on all three. (Firefox has never updated critical changes I made a while ago. Safari shows a hit counter twice that I thought I removed or at least I never see it anywhere else.) My host is not .mac, but hostmonster.co I have not yet begun tearing my hair out in frustration, but my hands are beginning to reach for my scalp...HELP! And thank you in advance.

Wyodor,
1. It may be messy or it may not. It seems that is opinion as opposed to fact. I am not a designer. I am a guy who has iLife and so I have iWeb & a need. Mac makes it easy for those of us with no designer experience to feel we can do something. It may not be up to designer's standards but it's what we have.
2. Why two email addresses? One is direct link and the other is in case someone would rather copy & paste the address in case they are at another computer and do not wish to use the default email of the host computer. I don't know. It was a suggestion I took. Doesn't seem harmful to me...
3. Out of focus? Where? There are no options to focus anything and all it is is typed words. I cannot see how it is out of focus.
4. I have looked and looked again at these pages. Code means nothing to me. So all I can do is look at the page itself and try to figure things out. What is frustrating is that things look different depending on which computer and which browser I view them on. While working here on iWeb I see certain results but I don't have several computers and every browser available all the time. So how am I supposed to fix anything when it looks fine when I working on it? I just discovered yesterday while at a friend's house that on IE the site had two hit counters I cannot see on Camino, Safari or Firefox. I even thought I had removed the hit counters mostly because I couldn't see them when I put them on.
5. I have used a font that may not be recognized. But it is recognized on the other pages. My problem is mostly - but not entirely - with this page. All I see is that even where the pages are similar, they read differently. I have nothing blocking these links any more than I might on other pages and yet this one page will not link.
Thanks for your help, though. As I said, the code here is Greek to me. So I cannt use it or even recognize if its helpful...

HT204347 pages: just book a new mac book pro and my "Pages" is not linking with icloud

pages is not linking to my iCloud

Hi,
Have you looked at the following support docs?
http://support.apple.com/kb/HT4527
http://support.apple.com/kb/HT4889
Jim

How to link second page to my Homepage? (Help sources do not help.)

After checking my three Help sources (two of which I printed out), this question remains unanswered:
How do I link each page to the other pages? I know that I can access them when working in iWeb by clicking on folder icons in the vertical navigation panel on the left, but I would like to be able to click onto a PAGE itself and acces other pages.
I published to the Internet but can only get my Homepage. I thus cannot view the second page that I am working on. I clicked the box "Make visible" but this doesn't enable me to see (on the Internet) that second page I'm working on, clearly because I don't know how to make a link from the Homepage to that second page.
— Lorna in Southern California

Hi Lorna!
Congrats on figuring out the iWeb navigational
choices. Doesn't it feel great when we can accomplish
something on our own?
.......... Lorna says ................................................
Lisa hi Thank you for the congrats, and yes, it does feel good to figure things out on my own, but much of my progress I owe to others who have pointed me in the right direction or outright told me the answer. But it feels SO GOOD to discover that I can solve some problems, given a lot of time to think and fiddle.
Like James said (I think his name is James) the
little blue inspector button gives you the choice of
turning any picture or text into a hyperlink, to go
either to another page within your site, or to an
external link. It took me forever to figure out it
seemed!
.......... Lorna says ................................................
So I am not the only one who sits for a long time trying to figure things out! As for the hyperlinks: I guess having the navigational bar at the top of each page is minimally good enough, but I like knowing that I can make any object into a hyperlink.
QUESTION:
HOW CAN I MAKE THAT OBJECT VISIBLY AND CLEARLY A HYPERLINK so that the casual visitor eating a Krispy Kreme donut does not overlook it because it blends right in?
Currently I am unable (like hundreds of others, it
seems) to publish my website.
.......... Lorna says ................................................
Lisa, WHY ARE YOU UNABLE TO PUBLISH YOUR WEBSITE?
However, I am enjoying
working with iWeb as far as 'practicing' making
pages, editing, working with the color, text, all
that sort of fun stuff. Being new to the world of
Macintosh/Apple, I'm inching my way to learning
things.
.......... Lorna says ................................................
I love the Mac. I am so glad I bought one way back in 1984. I just installed Tiger and iLife '06 last week (middle of July, '06) and am so glad to have it.
One thing I've noticed though, and I don't know if
this amounts to a hill of beans... but the folks that
seem to be having the problems publishing their
webpages via iWeb are on the East Coast of the US.. I
wonder if that's a clue...???
.......... Lorna says ................................................
I haven't a clue as to why except to say that it is prolly a non-causal relationship!
— Lorna in Southern California

Linked css page not showing next to html page

i am not seeing the linked css page icon next to the html page icon unless i physically open the css file

Are you working within a Defined Local Site folder?
Part 03 - Setting up a Local Site | Classroom: Basic Site Layout and Navigation in Dreamweaver | Adobe TV
Is your CSS file inside your Local Site folder?
Are you sure your external CSS file is linked with the correct file path? For example, if working with new pages, you must save & name the page first. Then DW will update paths to external files for you.
Nancy O.

Hyperlink format changed for all not only new links on page

Hi,
The button "Use for new links on page" (in German "Für neue Links auf Seite verwenden") on the inspector dialog (hyperlink -> Format) doesn't work. It changes the format of all existing links on the page! Can this be fixed please!
Thank you
Thomas

That seems to be the way that button works, right or wrong. However, send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.
OT

Links between pages not working

I can't seem to get links between pages in my folio to work. Links between multiple pages of a single article will work, but when I try to link from one article to another article, nothing happens.
Using CS 5.5, Folio builder 1.1.3.
Thnx,

The Help page for this is: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html#WS67cb9e293e2f1f606f59889512d69320e0d-8000
The syntax for your Hyperlink is: navto://articlename#1
Replace articlename with the name of the article you want to jump to, and replace the number 1 here with the specific page number you want to link to, remembering that DPS wants to count from zero rather than from one. So...
navto://Fish_Fingers#2
...would link to the third page of the article named 'Fish_Fingers'.
Ali

I can not print web pages,print box does not appear . I can print web pages using IE

Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
Printer: Brothers HL-5140
Thank you,
Syd

First of all, update Firefox to 3.6.17 via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
To revert to Google as your preferred search engine, please do the following.
* In the location bar, type '''about:config''' and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''.
* Go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
Update via http://get.adobe.com/flashplayer/
Printing issues might be fixed by installing Java via http://www.java.com/en/
But if the problem persists, please post again.

Firefox toolbar up on the page doesn't appear I can't check files settings downloads etc

I have a problem to watch firefox toolbar up on the page including files settings downloads saving a link printing etc
thanx for your help

Sounds like have hidden the Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) but just in case you don't, see: <br/>
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
Navigation Toolbar (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Either click View > Toolbars, click on "Navigation Toolbar" to place a check mark OR right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: <br />
https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
http://kb.mozillazine.org/Toolbar_customization
http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
Bookmarks Toolbar: Same procedure as Navigation Bar except click "Bookmarks Toolbar".
You could be in Full Screen Mode if you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See:<br />
http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
You need to update your plug-ins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape 9.3.2
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_17 for Netscape Navigator (DLL Helper)
Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader:
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#*Download complete installer:
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your desktop
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive (link in article below)
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure but use IE to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*Download link and other information: https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#'''Update Java:''' https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Toolbar not linking to pages

Similar Messages

Maybe you are looking for