Toolbar too large after update
After the latest update, the tool bar and the 'Tools, sign, comments' section have become too large and occupy nearly 30% of the screen. The default display size is 150% on my PC, but still this is the first time I'm facing this issue. I did not come across any settings in the preferences area to correct this issue. Any suggestions?
Hi,
It seems like the UI has switched to 200%. You can fix it by following steps posted in this thread:
Opened AR today font size in super small, went to "preferences" and so on, did changes, nothing works, what's the deal???
I hope this helps.
Best,
Luc
Similar Messages
-
Why my Mac Pro 2009 became too slow after updated Yosemite?
Why my Mac Pro 2009 became too slow after updated Yosemite?
When the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
MBP 2008 late crashes too often after update to Mavericks
My Macbook Pro 2008 late(First generation of Unibody) works perfect on OS X 10.8.x, but after update to Mavericks yesterday, it crashes too often, about 1 hour 1 time.
It seems com.apple.driver.AppleIntelCPUPowerManagement caused the issue, but I have no idea how solve it.
I checked the kernel extensions, found there are some from VirtualBox, so update it to latest 4.3.0 version, it have initial Mavericks support, but crashes still.
================ Report log =================================================
Anonymous UUID: 04E12C5E-63CF-CA95-2E04-67BD884B1997
Fri Oct 25 11:06:35 2013
panic(cpu 1 caller 0xffffff8004adc19e): Kernel trap at 0xffffff7f869c296c, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef7f869e89b8, CR3: 0x00000000077d0000, CR4: 0x0000000000000660
RAX: 0x0fffffee3e5e0000, RBX: 0xffffef7f869e89b0, RCX: 0x0000000000000001, RDX: 0x000000000000011c
RSP: 0xffffff80ed14bd80, RBP: 0xffffff80ed14be70, RSI: 0x0000013c1a257dc2, RDI: 0xffffff80e689d148
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x00000000ffffffff, R11: 0xffffffffffffffff
R12: 0xffffff8016c74800, R13: 0x0000000000000005, R14: 0xffffff80e689d148, R15: 0xffffff7f869e6e20
RFL: 0x0000000000010006, RIP: 0xffffff7f869c296c, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef7f869e89b8, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80ed14ba10 : 0xffffff8004a22f69
0xffffff80ed14ba90 : 0xffffff8004adc19e
0xffffff80ed14bc60 : 0xffffff8004af3606
0xffffff80ed14bc80 : 0xffffff7f869c296c
0xffffff80ed14be70 : 0xffffff7f869c1b89
0xffffff80ed14bf30 : 0xffffff8004adda5c
0xffffff80ed14bf50 : 0xffffff8004a3757a
0xffffff80ed14bf90 : 0xffffff8004a378c8
0xffffff80ed14bfb0 : 0xffffff8004ad6aa7
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10 ED6F331236]@0xffffff7f869bf000->0xffffff7f869e9fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000004800000
Kernel text base: 0xffffff8004a00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 657284692775
last loaded kext at 268306409361: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f859d5000, size 65536)
last unloaded kext at 348256286423: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f86cb4000, size 8192)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.3.0
org.virtualbox.kext.VBoxNetFlt 4.3.0
org.virtualbox.kext.VBoxUSB 4.3.0
org.virtualbox.kext.VBoxDrv 4.3.0
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:Hi, Xuqing Kuang.
Here are a couple troubleshooting steps that I would recommend.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Jason H.. -
New toolbar keeps disappearing after updating to 3.6.24
I have had to redo a new toolbar twice already after doing an update for Mozilla. I am running Windows 7 Home premium on a desktop:
Microsoft Windows
Version 6.1 (Build 7601: Service Pack 1)Yes, I kept putting buttons on it. I did it 4 times before I decided to run recovery and set back to prior to update and problem solved. Checked help for updates and no updates were listed. Believe update I ran was a virus since still running same version
-
Mac fan running too loud after update
I have a Macbook pro 13". (mid 2012)
Memory: 4 GB 1600 MHz DDR3
Processor: 2.5 GHz Intel Core i5
Storage: 500 gb
After updating to Yosemite 10.10, my macbook pro's fan is running too loud and producing a lot of heat. I reseted the SMC several times but it didn't help. Surprisingly, The fan also runs loud even if only 1 application is open.
Please advice me what should I do.
Thank you in advance!I have the same model and I've had the same problem for a few days. I didn't really have problems with heat, but my fan was going crazy even though I was just browsing the Internet. Maybe you're logged into iCloud and have some activity going on. What worked for me was going to:
1. System Preferences
2 iCloud
3. Uncheck things like "Keychain", "Find my Mac", etc. (things you don't need/use)
For me, I unchecked everything and logged out of iCloud. After several minutes, my fan is super quiet and not acting up! Hope this helps. -
Should my tiles appear larger after update
I just applied about 4 updates to my Nokia Lumia 900 last night.I am now at version 7.8.
Everything works fine.
My question is, are the tiles suppose to be larger on the start screen now? After the updates, my tiles are now larger. Is that suppose to be the case?
My wife has a Lumia 900 also, but has not run any updates in a while. Her tiles are a tad smaller like mine used to be. I'm not complaining, just wondering.
Is there a setting that controls the size of the tiles?
Are the tiles still 173 x 173 pixels?I believe they will look larger due to the fact that they now occupy more of the screen (width wise) now the band to the right has been removed.
-
Program windows too large after using migration assistant
This seems like a silly question. I just got my MacBook for Christmas and I used Migration Assistant to transfer everything from my iMac to the MacBook. It worked great except that the sizes of the program windows remained the same as well, and they are too big on this 13" screen for me to access things that are way down on the bottom of the window. I can't get a hold of the corner tab that allows you to resize the window manually because it is off the bottom of the screen. I did try minimizing/moving the task bar from the bottom of the screen, but the windows are still too big. I discovered the problem in iTunes, but I suspect it is universal. I'd appreciate any help you can offer! Thanks.
to doc m
I was having problems with my photo booth, when i'd open it up i could only see half of the pics that I had already taken. I couldn't delete them or anything. After reading what you wrote it had dawned on me, maybe it could have been the screen resolution. I followed your steps and now I can delete the pics I didn't want & I can also see the full photo booth thingy [:
even thou I didn't ask a question, you answered mine & thank you very much [: -
IMac is much too loud after updating to 10.4.9
Hello!
I just installed the 10.4.9 Update on my Intel iMac. Right after reboot I launched iTunes and noticed that the sound volume of the Mac had been increased by far!
What has been my normal listening volume (50%) is now really loud, normal volume seems to be 1 or 2 boxes on the scale you see when changing the volume.
This is really annoying as you cannot listen to quiet music any more without changing the volume directly in iTunes (what doesn't work with the remote). Furthermore this would mean to change the volume in any program manually. I think that is not the way an Apple system should work...
iMac CoreDuo 20" Mac OS X (10.4.9)Sorry for that. I should have had a closer look first, though I did not find a topic concerning this special problem.
Well, I hope there is some update coming up from Apple, for I don't see any practical solution to this. -
CPU too high after update & disabling all addons crashes twitter
For 3 days cpu is near 40 to 50% after your latest "update" (which it isn't). Happens a LOT after you update.
Disabled all addon's per the help tab (I only had 2 left on) and it is slightly better, not back to normal.
In addition, I can't see twitter properly. That's a big fail.It might be helpful to know what process, or processes, are hogging the CPU - you can see this using Activity Monitor (showing All Processes).
charlie -
Itunes window too large after upgrade!
After upgrading to itunes 8.2, the the itunes window opens so that the bottom of it is below the bottom of my display. I can't get to the "handle" on the bottom corner to make it smaller, and I can't get to any commands on the bottom of the screen (can't add playlists!!) Any suggestions?
Go to System Prefs and change your screen resolution. Resize the window, then change the resolution back.
-
Netbeans 6.1 went crazy after updating
This is driving me crazy (too).
After updating Netbeans 6.1 went crazy and doesnt stop opening itself everytime I close it.
In other words "*Everytime I Exit Netbeans it opens itself again, then I close it and it opens itself again...*"
Anybody can help on that? (I dont know exactly where to ask about this).
ThanksJust uninstall it, and do a clean install of 6.1
-
Ipad icons too big to see full screen after updating to IOS 8?
I have an IPAD Retina (4th generation) and after I updated to IOS 8, it worked fine for 2 or 3 days. Yesterday my screen went too large to display the full screen (icons are also large). When I open an app, everything is large. I tried changing the font seize but no change. I rebooted my ipad a great number of times, no change. I've searched Google but I haven't seen anyone talking about this problem. Any ideas?
ThanksShould it happen again double tap the screen with three fingers. Then go to settings> general> accessibility> zoom> off.
-
I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!
Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.
-
In the Bookmark Toolbar, the icons for websites take up too much space and are distracting. I used to use the Bookmarks - Deiconizer add-on but after updating to Firefox 22 it doesn't work anymore.
I tried adjusting the userChrome.css as in other posts but that does not work.
Please help!Hi haweyext,
Did you see this thread from yesterday:
[https://support.mozilla.org/en-US/questions/964732 How do I keep the icons out of my Bookmarks Toolbar (tried Bookmarks Deiconizer) even after downloading files?]
If userChrome.css isn't working (note: you need to exit and restart Firefox before it takes effect), you can apply that rule to Firefox using the Stylish extension instead.
Does any of that help? -
When I am trying to download (after getting the email that it is ready to download adobe acrobat pro) it says this - 413 Header Length too Large Any suggestions??Ado
Moving this discussion to the Acrobat Installation & Update Issues forum.
Kltjlt6458 to resolve the current error clear your current web browsers cache and cookies. If you continue to receive the same error then please utilize a different web browser.
Maybe you are looking for
-
Serial numbers from PO(ME21N) to be updated in standard VL10B deliveries
Hi, New to enhancements and need help. I have Purchase Orders created in ME21N. But material specific serial numbers are entered in Texts as this enhancement wasn't implemented prior prod release. Now we needed seralization to be implemented. Configu
-
Automatically cr. block Sales Order once they reach within the Cr. Horizon
How to automatically credit block Sales order made outside the Cr. Horizon, once they reach into the Cr. horizon. I have tried testing the same through Program RVKRED08, but it works for some orders if the Cr. horizon is maintained for 60days. But do
-
My iPad 2 continues to lock up. I turn it off by holding the home and hold buttons, let it rest for a couple of hours and then it does it again. The screen freezes and does not respond to anything. It is so frustrating, I have set it up as a new iPad
-
HT1918 I update my payment info and it still doesn't let buy stuff
I up dated my info and can not buy anything
-
I photo is unexpectedly quitting when placing an order.