Toolbar will not arrow down anymore. We have to manual enter all websites. Any help is appreciated. Thanks.

Toolbar will not arrow down.

Make sure that the Location Bar is not set to "Nothing":
* [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks, Nothing
See [[Smart Location Bar]]
You may also need to check:
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Similar Messages

HT4623 My ipad will not power down anymore. Each time I try to power down it shuts down, then powers up straight away. I have checked my settings and cannot find anything to help me.

MY ipad will not power down anymore. Each time I try to power down it shuts down then powers up again.

See if this fixes it. Reboot and let the iPad start up, then try to power down.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

Ooops I put the lot in the strap line!
My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
I would be grateful for help!! Obviously...

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
PS CC is up to date
Running OS 10.10.2
HP Printer updated
Help?

Have you printed to this printer from 10.10 before? If so, check your connections.

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.

I've never had this problem before. It only affects Photoshop CS6 and CS5 that I have installed. I'm running MAC OS 10.9.5
I have three printers and HP and two Epsons, and I get this dialogue when trying to print from Photoshop CS6 or CS5.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Other applications print fine on all three printers. I tried deleting the Photoshop Prefs numerous times without results.
Does anyone have an answer for this?
Thanks.

Have you printed to this printer from 10.10 before? If so, check your connections.

My mac mini will not shut down. I need to manually shut it off with the power button.

My mac mini will not shut down or restart. I need to manually shut it off with the power button.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

Setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity. it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

hi,
i'm setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity. it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

Geesh - all this information and no one has any clue to this? Not even someone from Apple?
Can someone at least point me in the right direction?

Macbook pro will not shut down if I have opened iTunes 10.4

I have an Intel Core 2 Duo Macbook Pro running Mac OS X Lion. Unfortunately if I've used iTunes at all my laptop will only shut down if I hold the power button for 10 seconds. This occurs after every application including iTunes has been shut down. If I have not opened iTunes during a session then the computers shuts down normally. Can I do anything about this, is it serious, and has anyone else encountered the same problem? Thanks for any help givien.

I'm not entirely sure if mine does this after I only run itunes, but after normal use of my browser and email, my coumputer only shuts down if I hold the button. I'm not quite sure what's going on, but I'll update you if I find a solution.

HT4528 my iphone is not working, I have tried to reset and access to activate it and it will not let me, saying I have incorrect apple id and password! Help please!

Can someone help me with my apple id reset to get my iphone to work please?

Enter your correct Apple ID and password.
If you bought the phone used you have encountered activation lock installed by the prior owner. You will not be able to get past the activation lock without the proper credentials. Contact the prior owner. If the prior owner does not know the details the device is probably stolen and you have lost your money.
If you bought the phone new from Apple take it back to the store with your receipt so that Apple can help you.

Since installing Mac OS X 10.9.2, when my computer sleeps, it frequently will not wake up, and I have to restart from scratch. Any advice?

Since installing Mac OS X 10.9.2, when my iMac sleeps, it frequently will not wake, and I have to force a computer restart.

Kate Bernard wrote:
The OP said that the computer will not awake from sleep, but did not mention any troulble with WiFi.
Are the troubleshooting steps for fixing a WiFi connection after waking from sleep relevant to a computer that fails to wake up at all?
Perhaps.

HT201401 Ever since the new IOS update,my WI-FI will not turn on. I have no idea what to do please help.

I have no idea how to fix this please help.

I have even tried reseting all the data but that didn't work either.

Have quick time on windows 7 and can not rotate or flip the video sent to me from friends any help on this thanks.

Have a windos usung Quick Time and friends sending videos to me that are sideways and upside down. Any way to flip while watching from Quick Time.
Some are from a MAC computer and can not turn them to watch them the right way. How do i do this thanks.

I have purchased Quicktime Pro and when I use the rotate button under Show Video Properties-Visual Settings, the viewing screen rotates from portrait to landscape but the video itself does not rotate. Any suggestions as I have a lot of unusable video which I want to pull into my video editor.
BTW, my Studio 15 which is a fairly high-end software has successfully rotated previous videos shot with my wifes I-Phone 4 but on these video clips, the rotation works but then does not play. I wonder if it was some setting or problem with my wife's Iphone?

I'm trying to reset Macbook Pro to factory. I have the disk, but when I try to reboot from the disk, holding down "c", it just goes straight to installation. Any help is appreciated.

I read the directions from Kappy on how setting my Macbook Pro to factory settings. I put the OS disk in, rebooted while holding down 'c'. I got the choose language, but then it goes to 'installation', no menu. Am I doing something wrong?

Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and return to the installer. Complete the Snow Leopard installation.

Gen5, 80Gb iPod battery will not charge. States: please wait. Battery very low. ANY help?

5gen video iPod will not charge. Only states in LCD window: please wait. Very Low Battery. Can anyone help?

That's usually a good indication that your iPod battery's is shot and in need of a replacement. If you'd like, Apple can swap out the battery for a flat fee.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Otherwise, you can also send it to a third party repair service center that could do the same job for a little less. Google "ipod battery replacement" for different options.
B-rock

Toolbar will not arrow down anymore. We have to manual enter all websites. Any help is appreciated. Thanks.

Similar Messages

Maybe you are looking for