Toolbox for color laser 2550n printer

Need the toolbox for XP operating system.  Where can I get it?

HI uiw,
There is no full feature driver available for this printer on Win 7. The toolbox is included with the full feature software. What feature in the toolbox are you looking to use?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Color Laser 2605dn Prints Lines on Pictures

    Color Laser 2605dn Prints Lines on Pictures.
    Normally all txt prints ok but I cannot get rid of the horizontal and vertical lines ( if the image prints vertical) on all images that it prints.
    I rarely use this printer.  I have gone under settings/print quality and calibrated but it does not fix the problem.
    Please help.
    Thank you.
    JB

    Looks like a high voltage power supply issue with the black only.  Since the laser/scanner on this model uses 1 motor for 2 colors that would eliminate the laser/scanner.  Repair by a repair shop may cost more than the printer.  Only suggestion I can give to is do a google search for the service manual and download it.  Look for instructions for the removal of the high voltage ps and remove it and then put it back in.  There is always the possibility one of the connectors has become loose and is causing the issue.  Good Luck.

  • Recommendation for color laser printer

    What is a decent color laser printer to use with Airport Express? I don't print a lot (perhaps a couple of hundred pages per month), so having separate toner cartridge for each CMYK color isn't necessary.

    I believe this link is a good place to start.
    http://guide.apple.com/index.lasso

  • Win 7 (64 bit) Driver for my Color LaserJet 2550n Printer

    A specific driver for my HP Color LaserJet 2550n is not listed in the Win 7 driver list. I see drivers for 2500 PCL 5, 2500 PS, 2550 PS, and 2600n. ( just updated the Windows driver list.) I've been using the HP Color LaserJet 2550 PS driver, but have problems printing that I never had with Win XP. Which ddriver is the correct one for my 2550n printer?. Thanks.

    Hi,
    Please get it directly from the following link:
      http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • CS4 Color Management Settings - Confusing for Brother Laser Colour Printer

    I am new to Brother's Color Laser Printer and setting up the Color Management with CS4 for a document. Contacted Brother and they do not have informaton for Adobe Products. Here's what occurs when on the Print Screen:
    Under 'Options'  — CS4 has instated 'Let InDesign determine Color Management'.
    Under Printer Profile: 'RGB-SRGB 1EC6' is indicated. I can pull down the menu for other choices. Brother Printers are indicated but I have no idea which one to choose. What is difficult to ascertain is that in one project, I am using card stock. There is no choice available for other weights of paper as there is in MSW.
    Inexperience prevails with using a color laser printer with CS4's settings. In other words, should I leave the choices provided by CS4 rather than choose the Brother Printer settings that cannot be explained by Brother?
    HELP!

    What is difficult to ascertain is that in one project, I am using card
    stock. There is no choice available for other weights of paper as there
    is in MSW.
    With an RGB (no postscript) driver you would access paper and resolution profiles from the Printer... button of the Print dialog. So typically output color would be Composite RGB, Let InDesign Determine Color would be your only Color Handling choice, and you would leave the Printer Profile as Document RGB. Then you would click Print... and you would find paper and resolution settings under the Print Settings pop-up.

  • SAP Printer setup for Color Laser printer

    Hi,
    Currently i have just setup a printer in SAP successfully.
    But as this printer is a color laser printer, the printouts are in colors.
    Is there any settings which i can set it to monochrome?
    Thanks

    Chong,
    Could you check this?
    Run SPAD transaction. Enter your Output device name(Printer name) and hit enter.
    Under the 'Output Attributes' tab , see if the checkbox 'Color printer' is checked.
    If checked, uncheck it and try printing.
    Regards
    Sabu.

  • Toolbox for Color LJ 2550L for Windows 7 Home Premium 64-bit

    I have an HP G71-340US Notebook with Windows 7 Home Premium 64-bit OS.  Finally got my Color LJ 2550L to print from my notebook.  Now I would like to find the Toolbox for the 2550L.  Only way I can check on the printer is to go to my old PC with XP OS.  Is there a way to put the Toolbox on my notebook.  Want to get rid of my old PC.  Thanks!
    This question was solved.
    View Solution.

    HI uiw,
    There is no full feature driver available for this printer on Win 7. The toolbox is included with the full feature software. What feature in the toolbox are you looking to use?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Any idea why I can't print using Photoshop Elements 13 and an HP Color Laser Jet printer?

    Windows 7 with Photoshop Elements 13 - Recently purchased Elements 13 and haven't been able to print!  I have an HP Color Laser Jet CMI1312nfi MFP and printed fine last year with a trial version of Elements 12.  I keep getting errors saying "the saved print information is an incompatible version.  It has been set to default values" as well as "default printer could not be opened."  I downloaded an update to the driver for the printer today but still no luck.   Any other ideas? 

    I ended up reinstalling the drivers for the Canon from the original CD and that took care of it. Normally I can just copy the PPDs for our particular printers to the PPD folder in the Library/Printers/PPDs folder and it works fine, but for some reason this machine decided it needed everything reinstalled. It's working now.

  • Drivers for color laserjet 5m printer (windows XP)

    My computer crashed and burned - had to reinstall Windows XP - can't find right drivers on HP website for my Color laserjet 5  (c30991)   Any suggestions on were to go?

    The windows 8 driver for this printer should be available in late January. Please bookmark this site and visit it for up to date information. Also located on this site are links to documents for the network workaround and the in-os document.
    Laserjet Printers supported in Windows 8
    Install HP print software via a network in Windows 8
    As a test, I did install this using the windows 7 drivers, it printed fine but I received a pop up giving me an error printing but it still printed. I then used the network work around to shut the bi-di off and the pop up went away, again it printed fine. I would suggest if you use the windows 7 drivers, that you upgrade to the windows 8 drivers when they are available.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How to get a driver for hp laser jet printer 1010 suitable for Win 8.1

    I have a hp laserjet 1010 black & whilte printer which survived through Win XP,  Win Vista, Win 7, and now ready for Win 8.1, and it needs to work with a 64-bit hardware and 64-bit operating system.
    HP made a robust product in LJ 1010 and I cannot throw it away for its quality till date.
    How do I get a driver software for this printer?
    Windows could not find it automatically, I couldn't find it at HP support site.
    Can someone help?

    The 1010 is not supported in Windows 8 by HP.
    Link
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Reinstall HP Color Laser 3600n printer on Vista after running repair Vista disk, get a printer error

    Using Vista 64 bit Home Premium 

    Further clarification, the printer does show up in Printers in the control panel, but not as an installed program
    in Control panel -> Programs and Features,
    In device manager, and hidden devices checked off, another installed printer is displayed but not the HP 3600.
    This is bizarre as the HP printer worked fine for 3 years. This issue started when I installed another non-HP printer.
    Even a reinstall, (another) of Vista 64 bit Home Premium did not resolve this.

  • Favorite Color Laser Multi Function Printer

    Hi,
    We have four computers all running OS 10.6 connected to Airport Extreme base. Currently using Brother 5440 inkjet connected via Ethernet to the Airport. It scans from all computers, albeit with an occasional restart of the printer. We're looking to replace it (bad printerhead) with a Multi Function Laser device. I've read many reviews, etc complaining about inability to scan over the network or driver problems (HP 1312) for instance. My printer tech person recommends Canon 8350 or HP 1312. Any thoughts on the best Snow Leopard compatible Color Laser MF Printer?

    After long consideration and being fed up with issues with HP printers in he past (especially with limited functionalities with Mac OS), I bought me a Canon MP560 this summer.
    I think it's a great value for money, to refill the ink is reasonably priced (o.k., it could always be cheaper), but my most favorite feature is that I can print and scan from anywhere in the house. So far I am very pleased with both the scanning and printing results. Installation and handling of the SW suite is a child's play.
    If I had to print more I would actually look into a Laser / LED MFP... perhaps the Brother MFC-9120CN or its wireless brother MFC-9320CW, which costs actually quite a bit more.
    Unfortunately, as it seems, Canon has nothing to offer in this class of printers at reasonable prices that are also rated high.
    Just my 10 cents.

  • How to print in black only when yellow toner is empty HP Color Laser Jet 2500.

    Hi,
    I have a HP color laserjet 2500, I need to print in black only, I have a nice full toner, but the yellow has just ran out and it's flashing on the top of the printer, can I tell the printer to ignor this and just use the black as the documents are all in black/grey?
    Thanks
    Andy 

    Hello.. Try this:::
    *click on start
    *go to the control panel
    *go to printers for windows vista user
    *go to printers and faxes for windows xp user
    *right click on your printer icon
    *go to printing preferences
    *select on color tab
    *you will see options for color
    *select the print in grayscale
    *click on apply or ok button
    *try to print
    ---let me know if it works!!!

  • HP 4600n Color Laser Jet

    When powering up the HP 4600n color laser jet printer, it stops at 64mb************* What does this mean

    It sounds like it may be an issue with the memory module, have you tried doing a hard reset on the printer ?
    Thanks!
    For help with your specific printer visit HP Customer Care: www.hp.com/go/customercare
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accept as Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Color Laser Printer - advice for student - compatible with Airport Express!

    Hi there!
    In September my studies will start hier in Germany. I'm now looking for an Color Laser Printer as a birthday gift from my parents. For me the compatibility with my Airport Express is very important. The printing costs should be low, i prefer to spend more money on the printer once. I think a price between 400 and 600 Euros should be ok.
    Could you give me some advices or tell me your experiences?
    Sorry for my english, i know it's not the best;-)
    Greetings from Germany!
    Mark

    A very helpful guide as to which printers work with the airport express is here:
    http://www.ifelix.co.uk/tech/8013.html
    If it works on the quoted airport extreme, you should be good with the airport express
    Hope that helps and good luck.

Maybe you are looking for

  • Project Server cost calculation

    Hi All, We are using project server 2013. I have two fields 'vendor cost' and 'payment status' at task level. I need to sum all the vendor cost where the payment status is paid and display in a custom field at project level. How to achieve this. Than

  • [request] [non-linear video editing] PiTiVi

    i have had a lot of trouble attempting to get this working, particularly with the dependencies PiTiVi allows users to easily edit audio/video projects based on the GStreamer framework: Capture audio and video; mix, resize, cut, apply effects to audio

  • Setting up different databases

    I need some help in uderstanding how data bases are setup in Oracle. Let me be more specific. In Access one can setup a different database and "save" it. One can then create tables within each of these "independent" databases. Can one do the same wit

  • I signed for a year last week, the payment was confirmed, but my accout was not updated. How should i proceed?

    I signed for a year last week, the payment was confirmed, but my accout was not updated. How should i proceed?

  • Automatic Batch determination based of sales order type

    I want to do automatic batch determination on basis of sales document type. 1) I have made a condition table and added sales document type field in it. 2) defined Access Sequence and added that field in that sequence. 3) defined the strategy type, as