TOOLBOX PROBLEM

I have a broblem with thinkvintage toolbox, It was being upgraded but the instalation crashed. Now if I try to open the program a sign shows saying (I´ll translate cuz it´s in spanish) Lenovo Thinkvantage Toolbox detected a problem with your installed fonts, this will stop this and other aplications. Would you like to repair the problem? ... of course I hit repair and nothing happens
I´ve tried to uninstall and reinstal the program and nothing... the same mssge shows up
Original MSG in spanish: "lenovo Thinkvintage toolbox detectó un problema con sus fuentes instaladas, lo que impedira que se inicien estas y otras aplicaciones ¿le gustaria reparar el problema?

I am having a heck of a time with Lenovo Thinkvantage ToolBox.
I do not run the application daily, however, I looked yeaterday and there seemed to be a message.
I tried opening the Toolbox, it tried to open and goes to "not responding" and uses 50% CPU.
I have tried un-install and re-install without any luck. I tried deleting the contents of the PCDr folder, still have same issue.
Any suggestions?
I see 3 options
re-image the computer (most amt of work)
some kind and talented person on the forum has encountered this issue and has a resolution
move forward without the Toolbox
Any suggestions would be appreciated, my unit is under warranty and Lenovo tech support advise to re-install or re-image.
Thank You

Similar Messages

ImageCLASS D1120 Windows 8.1 driver issues and MF Toolbox problems

I'm having some real problems getting several imageCLASS series multifunction units to work in the windows 8.1 x64 environment. most recently, I've been working with a D1120, and I can't get it to do any more than print reliably - no scan functionality at all. I realize there are two issues here, so I'll try to break them apart as best as possible. For reference purposes, i'm running windows 8.1 on a 64-bit system. I was able to download the correct drivers and program from the canon website, and extracted them with no issue.
On the driver problem, I tried using the instructions found in this link, but windows went ahead and installed the 2009 series drivers regardless. It's connecting via USB, and doesn't give me any option to update the drivers once "installed".
On the MF Toolbox problem, I've gotten it to do one one scan job, and then it starts throwing a variety of error messages at me. First, it will say there is a data transfer error. Then it will say there are no documents in the queue. Then it will simply lock up and not start the scan job at all. I tried using the instructions in this link, but didn't get anywhere.
Any way you can help on one or both of these issues? I have a feeling they are related somehow...
Z

Hi merliner.
I will be glad to assist you.
The drivers may not be installed correctly because the Windows operating system is automatically installing the driver. First, we will need to disconnect the printer from the computer and uninstall the drivers. Since the drivers are being installed by the Windows system, I recommend uninstalling the drivers from the 'Print Server Properties' window. Please follow the instructions below:
1. Open the [Devices and Printers] window.
2. Left-click, one time, on the Microsoft XPS Document Writer or the Send To One Note devices.
3. Click Print Server Properties in the Menu Bar. (You will see "Add a device", "Add a printer", "See what's printing" and "Print server properties".)
4. Click on the [Drivers] tab.
5. Select the Canon drivers, then click [Remove].
6. Select "Remove Driver and Driver Package".
7. Click "OK". (You may receive a message stating that the Package could not be removed. This is fine. As long as the driver is deleted from the list, you can continue.)
Once the drivers are deleted, restart the computer. After the computer restarts, and leaving the USB cable disconnected, please follow the instructions below to install the drivers that you downloaded from the Canon USA website:
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder.
1. Please open your [Downloads] folder.
2. You will see two icons with the name: D1170_1150_1120_MFDrivers_W64_us_EN.exe . Double-click on the yellow folder icon with this name.
3. In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
4. The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete. Finally, scan a document by following the instructions below:
1. Verify that MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
2. The screen will show, "Scanning mode...".
3. On the computer, open the MF Toolbox and select [PDF].
4. Click the green [START] button on the [PDF] window. The machine will start processing the scan.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

XMLExport - Developer Toolbox Problem/Question?

I am using the XMLExport function of developer toolbox but have a problem which I hope someone can help with.
I need to retrieve data from 2 different tables for the XMLExport page that have no relating fields to use in my Spry XML Data Set, although i can add each table and create the Export function when I view the XML it is only showing data from the first table Export function. I had thought of creating 1 sql query to pull the database from both tables but I am at a loss with that as well.
Could someone answer why the XMLExport only sees 1 of the tables, or explain how to use 2 tables, I only want the first record from each of the tables without using any relationship.
I am using .asp and CS3
Regards in advance
Ray

Heya Ray,
I would not use ADDT XML export use THIS - Converting Database queries to XML (scroll to the bottom of the linked page for ASP example) it's easier to customize (two DB tables in one xml file) you can embed CDATA.
Granted this may all be possible through ADDT XML export I just find the linked reference easier to use. I used ADDT XMLExport in the past but went on to use the linked reference later on when I needed a way to embed CDATA into my dynamic XML file for spry.
Hope that helps!

Simulation Interface Toolbox: Problems using sbRIO with Tutorial: "Using the Example Sinewave Model with a VxWorks CompactRIO Target"

Hello
I faced a problem when I tried to do the Tutorial "Using the Example Sinewave Model with a VxWorks CompactRIO Target".
My specifications are:
Software:
Win7 64-bit
Matlab 2010b with RTW (to compile the *.dll) (32-bit)
GNU-Toolchain 6.3 running in Virtual PC-XP-Mode (to generate the *.out)
Labview 2011 with Simulation Interface Toolbox 2011 (32-bit)
Hardware:
sbRIO-9631 (from Labview Embedded Platform Evaluation Kit)
I was able to compile a dll and an out file.
I created a custom fpga-Bitfile with the Tutorial "Creating a Custom FPGA Bitfile".
In a blank VI I made the Host-VI and with the SIT Connection Manager I created the Driver VIs.
Until here everything worked fine.
Now my problem appeared. As long as I don't create Hardware I/O Mappings my model runs fine on the sbRIO:
But when I try to map the in and out port of the model to a HW I/O I get this error:
What causes this error?
On my sbRIO following software is installed (followed this instruction: Configuring a Real-Time Target to Run the LabVIEW SIT Server)
Best regards
Patrick

I have exctly the same issue. here is my error
my fpga for the bitfile
my driverVI
and my installed software

Missing features in CS4

What on earth would possess Adobe to dump the Navigation and History palettes that we have become used to? This seems like a couple of a major steps backward to me.

OK, some folks are having issues, but not nearly as many as with CS3. Of the threads you mention, the toolbox problem seems more generalized than the others which I think mostly come down to specific configuration issues yet to be identified, or work habits that may require modification. Missing the help files for UK installation might bite you though. :)
I don't know if Nicolas, who was the first to report the missing tools icons, is working on a network controlled from a domain, but I think that's the only way you can have a power users group. It's also worth noting that he installed from the Pagemaker update, and there may be some differences between packages. I expect my Design Premium upgrade from CS3 to arrive this week and I'll let you know if I have any issues.
I don't see anything there that would stop me at this time from ordering the upgrade, and I had tremendous trepidation last time, and only problems related to a bad DVD drive.
Peter

HP ToolboxFX has encountered an error and cannot recover.

Using LaserJet P2015. At startup, I get the HP ToolboxFX message. Need help to get this repaired. I have updated my firmware, for what it's worth...all updates have been done. Help!!
Thanks!

I was able to fix the toolbox problem.
Thanks
for you concern.
JIm

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

This is a duplicate topic with your other post. I will lock this one, please look here for responses.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Developer toolbox, Editable drop down encoding problem

Hi
I'm using DW CS3 with Developer toolbox, PHP MySql.
Problem is that Editable drop down show national characters
wrongly.
actually its inserts data in to database with wrong encoding.
I use encoding "charset=utf-8", all other forms working fine.
Only Editable drop down show [squares] instead Ä Ö
Ü ...
How i can do that Editable drop down will inserts data in
utf-8 encoding?
(like other forms and fields in my page)
Thanks!

I already read that one (and a few others) but it never
solved my
problem, but perhaps it will help Markokiz
Dooza skrev:
> Maybe this will help:
>
http://dev.mysql.com/doc/refman/5.0/en/charset-server.html
>
> Steve
>
> kim wrote:
>> Hi,
>>
>> I had a similar problem recently (not with tool box
though) and I gave
>> up using UTF-8 and went with charset=iso-8859-1
instead. It seemed (in
>> my case) that whenever data was being submitted from
a page to the DB
>> and then pulled back out I got the problem. I guess
it's some setting
>> in the MySQL but I just couldn't figure out where.
This is only the
>> case when I'm working with Danish characters. Maybe
it could help you
>> with your problem... maybe not.
>>
>> Markokiz skrev:
>>> Hi
>>> I'm using DW CS3 with Developer toolbox, PHP
MySql.
>>> Problem is that Editable drop down show national
characters wrongly.
>>> actually its inserts data in to database with
wrong encoding.
>>> I use encoding "charset=utf-8", all other forms
working fine. Only
>>> Editable drop down show [squares] instead ? ? ?
>>> How i can do that Editable drop down will
inserts data in utf-8
>>> encoding? (like other forms and fields in my
page)
>>> Thanks!
>>>
>>>
>>
>
Kim
http://www.geekministry.com

Lenovo ThinkVantage Toolbox 6.0.5514.61 "has encountered a problem and needs to close."

Popup Error Message after launching Lenovo ThinkVantage Toolbox from the toolbar:
"Lenovo ThinkVantage Toolbox has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost."
The options presented are "Debug" and "Close". If I don't hit close, LTT keeps running.
From the Event Log:
"The description for Event ID ( 1 ) in Source ( PC-Doctor ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: (4060) Asapi: (09:23:49:8990)(4060) DEFECT.LOCALIZATION - Error -- Missing String: scriptlets : button1 locale: PCDLocale: language = en, customer = lenovo, variant = ltt"
I am running the latest version, but this was happening with the prior version as well.
Solved!
Go to Solution.

Hi,
this sounds to me like a corrupt registry, or unregistered library files of the Toolbox aplication.
Coul you please test the latest version, that can be downloaded from following link:
http://web.lenovothinkvantagetoolbox.com/index.html#top
This is the version "6.0.5551.02"
Let me know, if this changes anything.
Cheers

Problem Normalizing VBR MP3's, Creative Media Toolbox 6, Zen 3

Anybody else using Media Toolbox 6 to normalize MP3's? Ripping with Media Explorer at max quality VBR then normalizing? with Media Toolbox 6. More often than not the size of the normalized track is a fraction of the original and consequently terrible quality (eg. down from 7 meg to meg). Sometimes it is only one track on an album, while the other tracks are all smaller by anything from a few k to a meg or so, but doesn't appear to affect the quality. More often than not the whole album will be affected.
I have tried normalizing with CBR ripped MP3's and there doesn't seem to be a problem.
Does anybody have any idea why this is happening?
I know I should just give up, accept the software sucks and re-rip and normalize the albums in question at CBR, but I hate giving up (and I paid for the ****ed software!).
I've been in contact with support but they insist I'm the only person who has ever mentioned this problem (therefore it must be me causing the probelm, not Creative software), and keep advising me to re-set the player and re-install the firmware etc. I've told them there is no problem with the player but they don't appear to be reading my emails.

My advice to anyone that cares about their music and mp3's, the only decent program that works without problems,does what it says and doesn't corrupt your files is MP3Gain and guess what...... it's 00% freeware !!
I've been using it since 2004 never had a problem and it's very simple to use, don't bother with anything else get working files and save your cash !!
Here is the link:? http://mp3gain.sourceforge.net/
MP3Gain does not just do [url="http://replaygain.hydrogenaudio.org/faq_norm.html">peak normalization[/url], as many normalizers do. Instead, it does some [url="http://replaygain.hydrogenaudio.org/">statistical analysis[/url] to determine how loud the file actually sounds to the human ear.
Also, the changes MP3Gain makes are completely lossless. There is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

Problem with HP toolbox

I went to check my fancy options that come with the hplip package's hp-toolbox and found that it wouldn't load, giving this message:
$ hp-toolbox
HP Linux Imaging and Printing System (ver. 1.7.4)
HP Device Manager ver. 10.0
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Traceback (most recent call last):
File "/usr/bin/hp-toolbox", line 159, in <module>
toolbox = DevMgr4(hpiod_sock, hpssd_sock, toolboxCleanup, __version__)
File "/usr/share/hplip/ui/devmgr4.py", line 152, in __init__
self.user_settings = utils.UserSettings()
File "/usr/share/hplip/base/utils.py", line 541, in __init__
self.load()
File "/usr/share/hplip/base/utils.py", line 643, in load
self.cmd_scan = user_cfg.commands.scan or self.cmd_scan
AttributeError: 'UserSettings' object has no attribute 'cmd_scan'
I did some basic google research and came up with nothing. I thought I should check on the forums before filing a bug report, and I also wanted to make sure that filing a bug directly to HP would be the best idea.
Thanks!
Nick B

Shirakawasuna wrote:
I went to check my fancy options that come with the hplip package's hp-toolbox and found that it wouldn't load, giving this message:
$ hp-toolbox
HP Linux Imaging and Printing System (ver. 1.7.4)
HP Device Manager ver. 10.0
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Traceback (most recent call last):
File "/usr/bin/hp-toolbox", line 159, in <module>
toolbox = DevMgr4(hpiod_sock, hpssd_sock, toolboxCleanup, __version__)
File "/usr/share/hplip/ui/devmgr4.py", line 152, in __init__
self.user_settings = utils.UserSettings()
File "/usr/share/hplip/base/utils.py", line 541, in __init__
self.load()
File "/usr/share/hplip/base/utils.py", line 643, in load
self.cmd_scan = user_cfg.commands.scan or self.cmd_scan
AttributeError: 'UserSettings' object has no attribute 'cmd_scan'
I did some basic google research and came up with nothing. I thought I should check on the forums before filing a bug report, and I also wanted to make sure that filing a bug directly to HP would be the best idea.
Thanks!
Nick B
If you can install one of
"xsane", "kooka", or "xscanimage", the error should go away.

Problem in Transaction Usage report in Virsa toolbox in virsa FF

We have recently installed virsa firefighter.
When we run Transaction Usage report in Virsa toolbox,selection by " Transaction",it gives all the transaction run in the particular client till date and not just the tcode for which we want the report.
For can be the reason for such a result?

Hi,
This may be possible if the trace is activated in the TA ST01. But it is not advisable to keep this trace for a prolonged period as it has an adverse effect in the system performance.
For a smaller user base, u can enable the security log in TA SM19, The report can be pulled from TA SM20.
Hope this helps.
Regards,
Varadharajan M

Toolbox Trial Problem

I have downloaded this free trial toolbox for dreamweaver,
and it has expired, and now every time it pops up in the begining
if I want to continue trail (no an option) or give them a serial
number, which I don't want to do either. It is very annoying
because every time I have to hit cancel. How do I make this go
away?

future-architect wrote:
> I have downloaded this free trial toolbox for
dreamweaver, and it has expired,
> and now every time it pops up in the begining if I want
to continue trail (no
> an option) or give them a serial number, which I don't
want to do either.
Go to Help > Manage Extensions to open Extension Manager,
and then close
Dreamweaver. In Extension Manager, select Adobe Dreamweaver
Developer
Toolbox, and click the trash can icon. That uninstalls ADDT,
and stops
the nag screen each time you open DW.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Problems adding a custom SSRS (PolygonsCRI demo project) control to Visual Studio 2012 toolbox

I've been trying to create a custom control in SSRS using the PolygonsCRI example. I've finally got the solution to compile in Dot Net 4.5 under Visual Studio 2012 targeting x86 architecture. (x86 seems to be the only way to compile without complaints
about architecture mismatch involving some of the key reporting DLLs.) I'm running VS2012 Premium, version 11.0.61030.00 Update 4.
I still can't use it in the Polygons demo reporting project.
I can add the DLL to the toolbox but all I get is a red rectangle and the message 'The custom report item type PolygonsDesigner is not installed'.
Suggestions? I'm out of ideas at this point.

Hello,
You have "add DLL to Toolbox"?
See Jazz Up Your Data Using Custom Report Items In SQL Server Reporting Services => Deploying CRI: You have to Register you CRI in "RSReportDesigner.config" file.
See also MSDN:
How to: Deploy a Custom Report Item
Olaf Helper
[ Blog] [ Xing] [ MVP]

Toolbox shows problem with HD

When runing hardware diagnostics, toolox found errors on the hd: reading test: WHD20-13K short SMART WHD16-SDE surface test: WHD08-8WN After chkdsk, still errors. What do these cryptic error codes mean? How do I proceed when I still have a warranty? Thank you!

Thank you, but is there a support forum somewhere? With Samsung, I submitted my problems and received a solution from them, How does it work with Lenovo? Will I have to send in the omputer or will they send an HD for me to replace? Thx

TOOLBOX PROBLEM

Similar Messages

Maybe you are looking for