Toolbox won't install on Vista x64 with HP Business Inkjet 1100

To install my HP 1100 on Vista x64, I was redirected to the only compatible driver which was for the HP 1000. The printer works, but has lost some of it's features such as double sided printing and the Toolbox to monitor ink levels. A search of the forums suggested installing OJProK550_Toolbox_en.exe, but after installing that I can't get it to function because it states the driver hasn't been installed. What driver? I'm confused since I have the functional driver for this printer installed and even reinstalled through New Drivers to be sure I had the latest. I suspect the conflict and failure has something to do with this optional driver I had to use.
Can anyone offer some suggestions please? I hate to wait until my ink cartridges are empty before finding I need one (it usually happens on a weekeng!)
Interestingly, I "scabbed" this printer to my laptop running XP x32 and from there I can do doublesided printing, but cannot access the toolbox either.

Hello, have you tried using the PCL 5 UPD? In my experience, PCL 5 runs better and is not glitchy which seems what was going on before you uninstalled it. Also, how do you have the IP addresses setup for your home network?

Similar Messages

ITunes won't install on Vista x64

I've got a Vista x64 system that crashed a while ago. I've succesfully recovered all of my other programs except for itunes and quicktime. I have tried to uninstall them with a few programs and then reinstalled, but then whenever I try to run it I get a "iTunes has stopped working" message. Any advice?

http://support.microsoft.com/kb/315353
It says you need to re-register the DLL.
All I did was google the error message you got -
+The Windows Installer Service could not be accessed.+

Shockwave won't install on Vista x64?

When I try to install (both web and standalone EXE) on my
Vista x64 system, I get the error
"Could not load the DLL library
C:\Windows\system32\Macromed\Shockwave 10\gi.dll". The application
has failed to start because its side-by-side configuration is
incorrect. Please see the application event log for more detail.
Any ideas how I can get around this? Odd that it's trying to
install a 32-bit app in system32 instead of the SysWOW64 directory
like it should...

Adobe doesn't care about you or your problems. Go away.
To get around this problem you would probably have to
disassemble the installer and then place the dlls into the correct
folders yourself. Adobe appears uninterested in doing anything. I'm
kind of pissed off, can you tell? On the plus side this is a great
opportunity for a competitor to take advantage of Adobe's
incompetence.

ITunes will not work on Fresh INstall of Vista x64 SP1

I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?

Read this scary microsoft support article on windows updates?

Vista Driver for Business Inkjet 1100

Does anyone know a workaround driver for the Business Inkjet 1100 on Windows Vista? I've tried the Business Inkjet 1000, but no go.

Hi,Try using the HP Printer Install Wizard and check if that may help:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-PIW&jumpid=ex_r4155/en/hho/ipg/forum/piw/

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

Purchased XFI extreme audio PCIe for someone and it won't install on vista 32

The hardware isn't detected and thus cannot be installed. I had the same problem with my fatality titanium but at least there was a patch download for windows 7 so the card can be detected. No such patch exists for the extreme audio PCIe which means the card won't install under windows vista or windows 7.
Am I missing something or what? I have read other similar complaints about this particular XFI.

EUREKA!
Reading the bowls of the post just below, It said to make sure shockwave was enabled. It wasn't!! I enabaled it and tried my web sites and things worked fine.
Thanks to those that post helpful answers

ITunes 8.1 won't install on Vista after uninstall

So I was trying to update my itunes and kept getting errors. I went on to uninstall it and reinstall which normally works. But this time around, I got some error messages and it won't install.
When it is installing, I get this message:
"An error occurred while attempting to create the directory: C:\Program Files\Common Files\Apple\Mobile Device Support\SyncServices\Schemas\iCal.syncshema\Contents\Resources\da.lproj"
I select retry in the window and it still doesn't work so I press cancel. Then it continues and terminates the install with this message:
"The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330."
It then proceeded to install quicktime with no problems so I'm quite puzzled on what I can do here. I just want to listen to music and my podcasts! If anyone can help me on this it would be greatly appreciated. I've looked through the forum and support things so I need some more guidance.
Thanks,
Peter

Bump, anyone?

Flash Catalyst Won't Install - Windows Vista

Hi,
I'm currently in a Catalyst/ Adobe Flash Workshop and Catalyst will not install on my computer.
I have:
No previous versions on my computer
No Log files were created
rebooted several times
Disabled Anti-Virus and Spyware
installed Adobe Flash Builder with no problems
tried installing from the cd, changed to a different cd and attempted to download directly from the Adobe website.
I am attaching a screenshot of the error.
after receiving this error it takes me to the screen to give Windows feedback.
I am using Windows Vista Ultimate.
Please help!

What I meant is
when you try to download Flash Catalyst it begins to download in order to subsequently install.
When it gets to the end of downloading onto the system to then subsequently install so that the application can then run it suddenly stops and gives me the Bootstrapper error.
I apologize but I am no longer in the Workshop - me nor the tech team could never get it to install.

Onlocation CS3 won't install on Vista 64

i have ppcs3. it came with encore and onlocation.
when i try to open onlocation it tells me that the program has stopped working.
any ideas?

Well I have same problem. I know photoshop has never been the most user friendly bit of software but what good is it if you can't install it?
The dialog with the progress bar appears for about 5 seconds and then absolutly nothing more. I am the laptop's admin. It had the majority of it's 320GB HD available. 4GB of memory and a very good display.
I certainly won't be paying good money for something that won't install on a brand new machine.
The most annoying thing about the whole thing is there isn't even an error message to indicate why the process was aborted.

Reader 8.1.2 won't install on Vista

Greetings,
I can not get 8.1.2 to install on Vista. When I run the download I get a window asking permission to continue. When I tell it to go ahead I get the little twirling circle (that replaces the old hour glass) for a few seconds then it dissappears and that's it. No popups, no message windows, no error messages, Nothing.
I've tried inactivating the UAC, virus protection, clearing the transaction log, running as administrator on top of being in an admin account.
The same download installed with no problems on my laptop ( which also runs Vista Home Premium ).
At this point I've loaded 7.0 and it's running fine; at least so far.
There have been several posts about problems after installing 8.1.2 but I have not been able to get that far.
I'd be greatfull for any suggestions ----- and ecstatic for a solution.
Thanks

I regret the moment I thought that installing Adobe reader 812.I had had a blissful relationship with all previous versions and apart from the interfering busybody (ie account control) giving me dire warnings about known compatibility problems - which ive not had - all was fine ; until I tried to download and install 812.I have had the same experience as others with the processgoing smoothly.However,each time ive ried to use it sends a record up with the message "invalid plugin detected adobe willcease workining.I disabled the plug ins and still he is on strike.Indeed,On one occasion I think he must have had his militant friends round as not onlydid he refuse to work but my whole system refused to work and I ended up having to disconnect the power.I would have made him redundant but I had already sacked his predecessor.I suppose I could try to tempt him back with higher wages but the real issue is that the longer people carry on using older versiond the more likely it is that version 7 will fall in with the wrong crowd and be a likely candidate for corruption.(why did he have a copy of woodworker monthly and has been talking to fellow conspirators about wooden ponys?).You have to retain a sense of humour but to end on a serious note - if solution is not found soon I can envisage the trial seperation becoming a permanent divorce!

Power Manager 2.30 Won't Install on Vista on R60

I have used System Update which tells me Power Manager is availa ble for install. I install and its says it is successful and asks me to reboot.
I reboot, but still now Power Manager. If I rerun System Update, I again get told that Power Manager is available for install. You get the idea. Also, the first install removed my orginal Power Manager.
I did successful install a Vista Power Manager driver. I tried removing it and attempting again, but have only been able to install the Driver again and no Power Manager.
Help appreciated.

Hello,
that´s bad, i would try a system restore, and when your system then runs satisfactionally, don´t Update!
The new power manager seems to have trouble with starting up und some functions are deleted.
Like showing of how much "watt" the system needs in DC mode.
Greets
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Lenovo System Toolbox won't install

I have a T60p with Windows XP & Service Pack 3 - I downloaded the latest PC Doctor-5 (1st5setup_518317x86) from the Lenovo website. I received an error message when UN-installing the old version and again when installing the new version. When I open the toolbox (via Start menu / programs / Lenovo Services / Lenovo System Toolbox), the same error window pops up with the message "Lenovo System Toolbox has encountered a problem and needs to close. We are sorry for the inconvenience." I have tried a variety of things to get PC Doctor to run; but always get this error message. I have repeated the download process to no avail. Any suggestions on how to resolve this issue?

I occasionally encounter this as well. When it happens I go to the Driver Matrix page for my model ThinkPad on Lenovo's support site, then download and install the update manually. That's always "fixed" the problem for me. But yes, it is annoying.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

I cannot install windows 7 x64 with AMD/ASUS RAID driver

Trying to install Windows 7 Ultimate x64 on an ASUS M5A97 mobo with AMD SB850 RAID, two WD 750GB drives configured as RAID 0. No drives are recognized by W7 install, so I choose Load Drivers. I put the drivers on a USB stick. Install finds the drivers there,
starts loading them, then comes back with "Installing an unsigned 64 bit driver is not supported and may result in an unstable Windows installation." I downloaded the latest drivers from ASUS website which are WHQL certified (as are the one's on the motherboard
disk). I saw other posts that recommend clicking Repair instead of Install, but I don't see where that option is. All I am given as options are Upgrade or Install. Choosing Upgrade tells me to boot Windows first. But this is a brand new install so...
I tried pressing F8 as setup was booting and chose "Disable Signed Driver Requirement" but that had no effect at all. If I turn off the RAID W7 sees both disks and happily installs. I see related posts going back to 2009; surely someone has
a solution for this issue?
Da Bomb

Hi guys,
I have been struggling with the same issue.
Win7 x64. Gigabyte GA-X79-UD3 Mobo with Intel core i7-3930K at 3.20 GHz
Marvell 88SE9172 SATA RAID controller with two Hitachi 500 GB spinning disks configured as RAID1
Windows would get to the point of asking for a mass storage drive. It would not see the RAID I had created.
Tried every driver I could find. Tried drivers from the "Station Drivers" website. Tried Marvell drivers for the same chip from the ASUS website. No luck. Tried loading from CD as well as USB flash drive. Always the same result... Windows would find
the drivers appropriate for the hardware found, I would select the RAID version, and after a few seconds, would report that the drivers were unsigned, and the installation was not supported for 64-bit drivers. Clicking OK would take me back to the load drivers
display with no new drives listed in the available drives window.
I tried hitting F8 during startup, and selected the "allow install of unsigned drivers option". That didn't do ANYTHING. Still the same error.
Someone suggested putting the drivers in the root directory. That didn't work. I also disabled all other drives except one CD rom and a USB drive and made sure that my RAID array was the first drive in the boot list.
Tried doing a windows repair, as someone else suggested. (This is an option that is available on the install disk I am using. It's enabled as part of EMS (emergency management services) in setup. Anyway, this was reported to be a workaround
to the signed driver issue. It would allow me to browse to the individual files, but no matter which one I selected, the response was "cannot find hardware appropriate to the driver selected" or some such nonesense. So I gave up on that.
Doing the install with the controller in IDE mode with just one drive connected, would result is Windows installing without a hitch. The problem was clearly when I presented 64-bit windows with a controller in RAID mode.
Long story less long, here's what worked for me....
Out of desperation, I began trying other subfolders in the driver lists. The Gigabyte manual indicated that the AMD64 subfolder was the correct one for the Marvell controller, when using RAID mode with 64-bit Windows. After trying every subfolder of
every driver I could find, the driver in the i386 folder actually worked. It initially came back with the same error about unsigned drivers, but after clicking OK, my RAID drive showed up in the list. I have been able to partition and format
the drive from within Windows setup, and am continuing with the install now. Hopefully won't be any problems booting from the drive post install, but so far it looks good, and I'm relieved that I was able to get it this far.
The whole process has been one of the most frustrating computing experiences I've ever had. This is what it was like back in the 90's when building PCs from scratch. I'm amazed that in this day and age the process is still so poorly documented
and filled with potholes, traps and caveats. Shame on the entire PC industry for allowing this to continue. I'm not asking that they jump in and try to automate it and do all the thinking for me (their solution for everything lately)...all I'm asking for it
clear, concise and accurate INFORMATION.
With the right information, and software that provides accurate feedback, this would all be easy...and even fun.
Hope this helps someone faced with the same problem.

ITunes won't install on Vista

Hi, I'm having real trouble installing iTunes. I've been using it for years, and tried to update around Christmastime, but that failed. Ever since, the programme won't open. I uninstalled iTunes, and tried to reinstall it now, but the error message I got was...
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version=28.0.50727.4053",type="win32",publicKeyToken="1fd8b 3b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800706BE.
I'm not a computer expert by any means, can someone explain what's happening? I'm sick of Spotify to listen to music on my computer, and having an unupdated phone!
If it helps, I have the other error message from a while back saved, but let me know if you need it..
Thank you.

I too have Vista, the evil entity, and not only can I not re-install itunes, but it has also disabled my 3 month old iphone and does not recognize the usb hook up, please tell me that there is a resolution for this. Mine all started with just trying to manage some files on my iphone through my pc, like I have done before without any problems. I received a message asking me to perform an update, I stupidly clicked ok, this is when my trouble began. The update failed and it then requested that I restore, stupidly again I did, and received this message:
"The iphone could not be restored an unknown error occurred 1603" I then noticed that my screen on my iphone was in a frozen state and had a picture of the usb cord with an arrow pointing to the itunes icon on it. (the phone was never disconnected during updating, so it was not user error) I attempted again, it requested a connection and diagnostics check, both passed without any problems. I tried again, yes gluten for punishment, and same occurrences but received an error log. I called Apple and they ran me through different rebooting methods both with the phone itself and my pc, nothing worked. Then tech then had me uninstall apple itunes and quicktime programs and associated files and try re-installing, this again did not work and now I have nothing. Apple is stating that it is a windows problem, which with Vista, I would not doubt!
And here are some of the other error messages I have received:
that it cannot complete download because of "unknown publisher" and doesn't have "valid digital signature"
in Re to the "apple synch notifier ": "this application has failed to start because a CoreFoundation.dll was not found, please try re-installing" (no disc ever provided, so I can't do that)
In Re to the driver: Apple needs to reinstall driver software for your apple mobile device, with one of the choices being locate driver software...windows will lead you through process or please insert disc (again no disc provided, cannot comply and it cannot locate on web when attempted)
If anyone can help with this I would greatly appreciate it. I am just a general user and have spent countless hours yesterday and today trying to resolve this.
you can email me privately too at [email protected] with any help or suggestions. Thanx again!
Tammy

Toolbox won't install on Vista x64 with HP Business Inkjet 1100

Similar Messages

Maybe you are looking for