Toolkit Installation - I can't find it

Hi,
I installed the math interface toolkit 1.0.2 and I can not find the functions. I have reinstalled several time. In fact, I reinstall the whole  LabVIEW product, and try  to install the toolkit again, but to no avail.
When I checked the Measurement and Automation Explorer, it is listed, but when I opened the NI License Manager, it was listed under LabVIEW 8.0. However, I have Labview 8.5, so I don't know why it is listed under LabVIEW 8.0.
I have also followed the procedure in the knowledgebase : to add subpallette into the existing pallette, but I can not find the necessary file.
I am beginning to suspect the toolkit is only compatible with LabVIEW 8.0, and not 8.5 , or maybe the toolkit is not comfortable with VISTA.

Hi okogidi,
if you install an additional toolkit you can see which installed LabVIEW versions will support this toolkit. Make sure that your toolkit is for LV8.5. Since LV8.6 you can download all toolkits for an evaluation period here.
Hope it helps.
Mike

Similar Messages

  • Device manager shows device but installation CD can't find a Creative prod

    Well, I suppose that the title of this thread says it all. My device manager recognizes the Creative product I have in one of the PCI slots, but when I insert the CD to install all of the programs I get an error message that reads "can't find a creative labs product on the system". Why would the computer be able to detect the device but not the CD? I've tried uninstalling and reinstalling the device but that doesn't help.
    The kicker is, my sound card worked just fine two weeks ago and I've not changed anything in the system.
    I did a search on this topic and other people have run into the same problem but there weren't any solutions posted. I'd really appreciate ANY help as this is a VERY frustrating problem.

    this is the glitch I think I had when I installed my XFI Platinum. I followed the instructions by loading all the hardware BEFORE loading any software. So now the card and the bay are installed and I boot up. The instructions tell you to cancel installing hardware at this point. The instructions say to put the CD in and install the software. Like I usually do I do a Custom install. Incidentely it only leaves out a few software options like the Volume Panel and some other stuff I didnt feel I would want. So when I put the disk in the first of 4 items as I remember it was the XFI software which is the mode changer and panel software and more. This is where I got the message you got so I skipped to the next item to install.
    I loaded the next item which was I think the media player and then I didnt load the next 2 because I didnt want them. AOl on my desktop and something else.
    So I figured it may have loaded drivers at this point but not the software because the card officially was in the system yet. So I rebooted.
    When it rebooted It detected the Card and a couple of other devices I think at this point.
    So obviously I figured that now the software would load since the card was officially recognized. I put the CD in and selected the first option and it then loaded the XFI software.
    Yea this is the one thing I found in the installation as a little confusing and not documented.
    Maybe this will help you.Message Edited by Crashman on 05-25-2006 2:3 AM

  • When installing Windows 8.1, The installation setup can't find my SATA HDD drive

    So I wanted to do a clean install of my Windows 8.1 so I formatted my :C (with windows 7 on it) to do so, but i accidentally also formatted the 100 MB of reserved system partition and so none of my bootprograms (like partition wizard and also the windows
    8.1 installer) can't find my HDD. It's a Seagate Baracuda 1TB if it might help and yes i checked every connection.
    Please help I'm in a hurry
    Thanks in advance,
    Misaelgod

    The Windows 8 forums are found @
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    This is a Windows 7 forum.
    When you post in the Windows 8 area be sure to provide more specific information.  What you have posted is a bit sketchy and needs to be clarified.
    I would suggest starting from scratch, boot from the Windows 8.1 install DVD, delete any existing partitions that may show up and then let Windows 8.1 installation take over from there.
    If Windows is unable to see the hard drive, you will have to resolve that hardware problem before you can continue with your installation.  It is impossible to diagnose your problem via a sketchy post in an internet forum.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Linux Installation- I can't find the required install script

    I'm trying to follow the LabVIEW installation guide for Linux, but I am having trouble. This post will be kind of long, as I will try to tell you everything I have done so far. I'm also kind of new to Linux, so I'm sure there are many things I don't know.
    I'm trying to use http://www.ni.com/pdf/manuals/374718a.html#installing
    and http://www.ni.com/pdf/manuals/375845d.pdf
    Step one from the guide is to insert the "installation media" and run
    #sh ./INSTALL
    and that's easy enough. Or at least it would be if I had any idea where this sh file is. I requested a copy of the install disks from my university (I'm installing on one of their computers), and they said that while they don't have any Linux install disks, they were pretty sure "it is on there somewhere," whatever that means. That seems to be about the extent of their knowledge regarding linux.
    On this disk is a folder named slcp10 with contents slcp10.cab, slcp10.mis, and slcp200_mft.cab, all of which are windows files and as far as I can tell impossible to run on linux unless I'm using WINE, which is clearly not the way to go.
    I also have a few ISOs from the site licensing department, but likewise no one seems to know anything about installing on linux. After mounting these ISOs I see that they contain the folders Bin, Common, Distributions, Licenses, and Readme (which is full of all kinds of irrelevant stuff). They also contain the files academicsitelicense.html, asladminresource.html, autorun.exe, autorun.inf, nisuite.xml, patents.txt, readme_core.html, setup.ede, and suite_md5_1.xml, none of which seem promising. Again, I only know how to install .exe files using WINE.
    I've since turned to the internet to try and download it from NI directly, and have gone to http://www.ni.com/download-labview/ and selected "Already own LabVIEW? Download the latest version." From there I select the dropdown for alternative OS, and select the MAC OSX option as I read somewhere on the NI help pages that this would work on a linux machine (which makes sense to me, as MAC is UNIX-based, right?). Well, that gives me a dmg file (apparently some sort of mac file?) which I found a way to use on linux by extracting it in 7zip and then mounting the hfs file. This still seems to be some sort of evaluation program, as it contains LabVIEW2014Evaluation.pkg, readme.html (which takes me to the OSX install readme-useless), installation_guide.pdf (again, solely for MAC and useless to me), drivers.webloc, and the folders Extras and Licenses.
    I'm at wit's end, man. I feel like I'm taking crazy pills. I've never had so much trouble installing a program before in my life, because technically I haven't even started the installation process yet, and I'm already about to defenestrate my computer. Please help me. I don't know what else to do, and I'm sure there is a very simple solution that I'm too ignorant to see.
    At our other lab we run windows, and installing is cake. After learning Linux over the past few months, I never thought I'd say this, but I actually wish I had a windows machine right now.
    Solved!
    Go to Solution.

    Well, I managed to get it installed, but only because I found another ISO from the site licensing department that had linux install files. Oddly enough, this single ISO is a scant 3 Gb while there are three other ISOs that each come in at 7.5 Gb. Are there really that many missing packages in Linux?
    Sorry if anyone reading this has similar issues, but the best I can do is say find the Linux install disk.

  • NW SR3 installation issue can't find NW export DVD 3/3

    Hello,
    I'm pretty decent installing SAP on unix and I'm now learning on windows 2008 R2 SP1/MS SQL 2005.  I'm also accustomed to downloading the NW install master, export CD's and unicode kernel dvd.  So here is my question:
    I'd like to just install NW 7.0 SR3 ABAP only to play around and kick the tires on windows.  I've downloaded the following DVD's to start the install:
    NW Install Export 1 of 2  51033493_1
    NW Install Export 2 of 2  51033493_2
    Install Master windows x64  51038621_13
    NW 7.0 SR3 UC-Kernel 7.00 Windows Server on x64 64bit   51033508_15
    I've already installed MS SQL and SAP jre.  SAPINST runs fine up to the point where I point it to the NW export DVD's.  There are only 2 export DVDS for an install but 3 DVDS for an upgrade.  The install is failing trying to find the third export DVD, but there are only 2 for an installation.  I've also doubled checked my install master was correct as well.
    It's probably something simple, but I'm stuck....
    TIA
    Scott

    Hello and thank you for the response.
    I was setting up a distributed landscape. I had already installed the global host and I was receiving this message while trying to install the database instance.  I've since started to download NW 7.3 for Windows.  I spoke with a co-worker and it made sense for a demo landscape to use the latest version.  I hope to have better luck with 7.3. 
    Thanks again for the reply.
    Edited by: Scott McCullough on Sep 5, 2011 2:49 PM

  • Satellite L300 - After XP installation it can't find the WiFi router

    After insatlling XP SP1 and insatlling many drivers all except for WLAN works. I did install the drivers and i did install Atheros for managing my connections, but It seems not to even find the wifi router.
    I'm using toshiba satellite l300 pslbce.
    PS! I had the laptop running on Ubuntu berfore, worked fine.

    Yes, installing SP2 is very important on newer laptops since so much changed from SP1 to SP2
    Here is some info found on Wiki:
    SP2 added new functionality to Windows XP, including an enhanced firewall, *improved Wi-Fi support*, such as WPA encryption compatibility, with a wizard utility, a pop-up ad blocker for Internet Explorer 6, and Bluetooth support.
    http://en.wikipedia.org/wiki/Windows_XP#Service_Pack_2
    Going from SP2 to SP3 is not a big step, but since SP3 is basically a compilation of hotfixes since SP2, you should install SP3 as well for security reasons.

  • Where can u find the ITunes Installer because it says it is no longer downloaded on my computer but ive had itunes for awhile now

    My Itunes is not working right i cant sync my ipod because it says the service is not downloaded anymore and i need to find the ITunes Installer where can i find that and do u have any ideas on helping cause i cant sync music.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • I can't find the Foundation Pack 11.1.1.4.0 demo

    Hi,
    I installed Foundation Pack(FP) 11.1.1.4.0 for Linux x86 according to the following installation and upgrade guide.
    For installation option I chose the "Complete Install".
    Oracle Fusion Middleware Installation and Upgrade Guide for Oracle Application Integration Architecture
    Foundation Pack 11g Release 1 (11.1.1.4.0) Part Number E17949-02
    After completing the installation I can't find the directory $AIA_HOME/samples.
    In the installation guide of the FP 11.1.1.2.0, there is the chapter about deploying FP demo.
    But there isn't it in the installation and upgrade guide FP 11.1.1.4.0.
    Oracle Application Integration Architecture Foundation Pack 11g Release 1 (11.1.1.2.0): Installation Guide Release 1 (11.1.1.2.0) Part No. E17360-01
    Isn't the demo originally included in FP 11.1.1.4.0?
    Best Regards,
    Mineaki

    Hi,
    I am also looking for the AIA demo for the 11.1.1.4 version.
    Do you know the exact date, when it will be available on OTN?
    Thanks & Regards,
    Karoly

  • I can't find listener_es

    i install the collaboration suite 904 on a single server linux. every thingh it is ok.
    only netca does'nt finish the configuration
    at the end of installation i can not find listener_es in file listener.ora
    where can i find an example of this file?
    can i add this while netca configuration run?
    thanks
    giorgio

    ok i run the configuration
    i get an error but i find listener_es in file listener.ora
    this is my listener.ora
    # LISTENER.ORA Network Configuration File: /home/oracle/OraHome4/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER_ES =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /home/oracle/OraHome4)
    (PROGRAM = extproc)
    LISTENERMID =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ocs.rsdom.com)(PORT = 1526))
    LISTENER_ES = (DESCRIPTION_LIST =
    (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = UMREG)))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ocs.rsdom.com)(PORT = 25)) (PRESENTATION = ESSMI))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ocs.rsdom.com)(PORT = 143)) (PRESENTATION = IMAP))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = ocs.rsdom.com)(PORT = 993)) (PRESENTATION = IMAPSSL))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ocs.rsdom.com)(PORT = 110)) (PRESENTATION = POP))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ocs.rsdom.com)(PORT = 119)) (PRESENTATION = ESNNI))
    (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = ocs.rsdom.com)(PORT = 995)) (PRESENTATION = POPSSL))
    when i try to run it but i think the listener does'nt start
    these are the output of commandline
    [root@ocs bin]# export ORACLE_BASE=/home/oracle
    [root@ocs bin]# export ORACLE_HOME=/home/oracle/OraHome4
    [root@ocs bin]# export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:/usr/local/bin:$PATH
    [root@ocs bin]# export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ctx/lib:$LD_LIBRARY_PATH
    [root@ocs bin]# export NLS_LANG=american_america.UTF8
    [root@ocs bin]# export TNS_ADMIN=$ORACLE_HOME/network/admin
    [root@ocs bin]# export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
    [root@ocs bin]# ./tnslsnr listener_es -user 501 -group 500
    [root@ocs bin]# ./lsnrctl status listener_es
    [root@ocs bin]# ./tnslsnr listener_es -user 501 -group 500
    [root@ocs bin]# ./lsnrctl status listener_es
    LSNRCTL for Linux: Version 9.0.1.4.0 - Production on 13-AUG-2003 14:27:42
    Copyright (c) 1991, 2001, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=UMREG)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 2: No such file or directory
    thanks
    what can i do?
    giorgio

  • Where can I find (full version) AirPort Utility v5.1?

    I would like to do a fresh full install of the AirPort Utility v5.1 for Windows on a new computer.
    I have downloaded the Updater version from http://www.apple.com/support/downloads/airportbasestationupdate2007001forwindows .html but it requires that version 5.0 is already installed.
    I have searched the Apple site for the full version 5.0 installer and can not find it.
    Can anyone please provide a link to either the full version 5.0 for windows, or the full version 5.1 for windows?
    Thank you for your help!
      Windows XP Pro   Airport Express

    Just so you guys at apple knows, this is ridiculous.
    What do you do if people lose the disks or buy the used hardware and they didn't get disks?
    The software only works with the AirPort Extremes so why does apple make it difficult for people who want to by there AirPort Extreme?
    The fact that I cannot download the software coupled with the fact that I cannot e-mail Apple about simple questions makes me want to just sell the AirPort Extreme and get a Netgear or a DLink or something else that is supported and worked the way the rest of the world expects it to.

  • I want to run apple Hardware Test but can't find it on any CD's.  I bought my iMac in 2009.  I think it had 10.4 installed.  It's not on my installation disk.  Where can I find it?

    I want to run Apple Hardware Text but can't find it on any CD's.  I bought my iMac in 2009.  It came with 10.4.  Apple Hardware Test is not on the installation disk.  Should I have it?  Where can I find it?  I"m now running 10.7.4.

    The disc plainly state:
    To  use the AHT, hold down the D key as the computer starts up.
    Works here. However, there was an issue with installing Lion that screwed this process up.
    Mount disc 2, run this command in the Terminal app, OPTION-click & hold Finder's Dock icon, and select RELAUNCH:
    defaults write com.apple.finder AppleShowAllFiles 1
    That unhides all hidden files/folders.
    Now, drill down to /"Applications Install\ Disc"/System/Library/CoreServices/ and drag the .diagnostics folder into your Lion boot volume's /System/Library/CoreServices/ folder. That might require you to authenticate to copy the folder into the CoreServices subfolder.
    Run this command to hide the normally hidden files/folders and RELAUNCH the Finder again.
    defaults write com.apple.finder AppleShowAllFiles 0
    This should allow the machine to boot into AHT when restarting and holding down the D key.
    If that doesn't do the trick, run this command in the Terminal app:
    sudo chown -R root:wheel /System/Library/CoreServices/.diagnostics
    At the Password: prompt, carefully type in your admin password, since nothing shows up on the screen, and hit the return key. Then, try another restart, holding down the D key.

  • I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program.  I can't find that program in my Apple updates file.

    I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program update.  I can't find that program in my Apple updates file.  Please help.

    From the HP Support site, this may help:)
    "Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
    Options 
    08-10-2012 10:54 AM
    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
    Hope this helps

  • Lync 2013 "Setup can't find or validate an installation file...."

    Enterprise client installation.
    We're running Windows 7 32bit SP2, Office 2010 32bit SP2.
    Attempting to run the install for Lync 2013 (32-bit) on a test system and get the following warning immediately:
    "Setup can't find or validate an installation file.  Please try installing Office from your installation source, or if you installed from a downloaded package, please re-download and re-install....."
    The source Lync 2013 file is direct from MVLS.
    Any reason why this install from MVLS refuses to run from the source?  Obviously, Lync 2013 wasn't included with Office 2010, so re-installing Office won't resolve this issue.
    Any help is appreciated.

    Hi,
    It may also cause by the issue of the conflict with other software, please use clean boot to test the issue. In this mode install Lync 2013 file again.
    You can refer to the link of “How to perform a clean boot in Windows”:
    http://support.microsoft.com/kb/929135
    If the issue persists, please also try to download Lync 2013 file and install again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Windows 8.1 installer can not find any disk partitions at all in boot camp 5.1

    Hello
    I have purchased a new Imac 27" latest model with Mavericks pre-installed. I am trying to install windows 8.1 pro with original disc 64 bit in Boot camp assistant 5.1. I am using a usb dvd writer to read windows disc. I have rebooted into the windows installer after mac finised downloading the windows support software into my 64 gigabyte flash drive which is formatted in ms dos fat 32 format. I made it too "Where do you want to install windows" screen but problem is there are no drives showing at all to select. The space where you usually see four partition drives with the bottom one named Boot camp, that space is totally empty showing that there is no internal hard drive at all....simply shows a error at the bottom can not find any drive. Please Help!!!!!!
    The mac os is running fine if i restart the mac and cancel windows installation. I have gone into boot cam assistant to delete the windows partition and retry but the same problem prisists. Plz help.

    HI..
    Better to post your topic in the Boot Camp community >  Boot Camp: Windows Software: Apple Support Communities

  • How can I erase my hard drive if the Installer can't find it?

    Our iBook, 10.3.9, was pretty reliable for 5 years, but it started to work slower the past days (maybe thru too little free space or too many programs open at the same time), so we restarted a lot.. until it didn't restart but came up with the question mark; then with a black screen/white letters asking for a login. But what is my login? I only know my admin password.
    I ran DiskUtility and repaired the permissions and wanted to repair the disk as well, but it said (in red letters): unable, could not unmount disk.
    I tried Archive and Install, but it stopped halfway and said there was an error, try again later. I didn't try again, but managed to save most of my documents to another iBook (10.4.3) thru FireWire Target mode.
    Then I was ready for Erase & Install.
    When I first got this iBook, I had a big accident and had to erase and install, at which time an Apple tech person advised me to first install 10.1 and then 10.2 ('cause this iBook was first made with 10.1, it had 10.2 when I bought it). So this morning I put my 10.1 install CD in and selected Disk Utility to Erase the hard drive. This was recommended in another thread to erase all faulty blocks on a computer. I must say the hard drive itself (below the '27 GB OSX' thing with the triangle in front of it) was already greyed out, but I selected this triangle thing and said erase.
    Then I went back into the Installer but... it can't find any hard drive to install OSX on. It shows just one blank space...
    The strangest thing is that one time this morning when I opened the iBook, it started up just like normal! But it worked too slow, it wasn't fine, so I restarted and then the problems came back just the same. Now I'm back atthe black screen with white letters. It makes me think though that not all is lost with this computer, which my family hopes with me.
    What can I do???
    ibook   Mac OS X (10.3.7)  

    Cornelius,
    ask as many questions as necessary! I know it is a confusing situation.
    Your profile lists OS X 10.3.7.
    I believe I upgraded last year to 10.3.9.
    Do you have a Full Retail Version of Panther available for re-install?
    Yes.
    What OS version(s) do you have a full retail version for?
    For 10.1, 10.2 and 10.3.2.
    Do you have an OS currently installed on your computer?
    I don't know...
    This morning I had set my mind to do the Erase & Install. I inserted the 10.1 disk, opened DUtility and selected "Erase" from the tablist. At that point the hard drive under the top-triangle was already grey I believe. I selected the top line, or the grey line, am not sure which was last. The computer started to spin. I can't tell if it erased anything at that point. But I know that once the computer stopped spinning its operationwheel, I quit DU and went on trying to install, but then there was no installation disc available. There was just a blanc field.
    There was nothing else to do but restart, and at that point the computer opened up with a desktop like normal. I know it sounds crazy.
    But it didn't work well. I could open a jpg-file in "Preview", but went in "Mail" and it took forever to open a message, at which point I restarted.
    And since then, the normal desktop hasn't shown up anymore.
    Whenever I restart, I keep getting stuck at 1. a flashing icon with the picture of a globe, which changes into
    2. the question-mark, then
    3. the window "Mac OS" with the blue stripe, filling up almost all the way and then
    3. a black screen with white letters. If I type something and press return, it asks for password. If I type anything and press return, it says 'login incorrect', and then I see a new screen with "Darwin/BSD (X-3.local) (console)..... next line: "login: "
    I don't know what my login could be.
    I have since started up from the 10.3 CD, but also only saw a blank field where there should be an icon of my hard drive. (at 'select destination').
    Since my post, I used my Apple Hardware Test-CD, and that gave a pass. It said "No device found" for AirPort and Mass Storage. "Device found" for Modem and "Passed" for Logic Board, Memory and VideoRAM.
    In any case, what I want to do is still to Erase & Install, because something seems to be very wrong and my stuff is safely backed up.
    Looking forward to your answer. Thanks a lot.
    ibook   Mac OS X (10.3.7)  

Maybe you are looking for