Tools are not answering normally

Hello,
Some of the tools are acting strangly: the rubber and the selecting tools are drawing black lines on the image.
Please help me to find what's wrong!
Thank you very much!

Thank you for answering me but I think I found what was wrong:the computer is very old so it's affecting Photoshop and how quicly the tools are acting.
Thank you very much anyway!!

Similar Messages

Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
Pete

Hi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou

My webpages are not working normal, what di=o I need to do to correct this?

I have McAffee and ran their quick clean to clean up files. I forget to modify the settings and my active x controls were deleted. Now my webpages are not working normal.

Firefox doesn't use ActiveX controls. Only IE uses them.
In what way are web pages not working properly?
*http://kb.mozillazine.org/Websites_look_wrong
*https://support.mozilla.org/kb/Websites+look+wrong

All photoshop cs4 tools are not responding. how do I get them to work, again?

all photoshop cs4 tools are not responding. how do I get them to work, again?

Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

The Xilinx 14.7 tools are not installed

Hi all
Not new to LV, but new to LV plus FPGA. Trying to compile a design I inherited from another worksite. The Compile Worker complains that "The Xilinx 14.7 tools are not installed." But they are installed - I even did a quick build of another design in ISE to make sure it still works.
FWIW, I'm using eval versions of everything while waiting for the PO to get processed. I installed 2013Xilinx14, so I wonder if Compile Worker is looking in the wrong place for the compiler (it quits just after creating the VHDL code).
OS is Windows 7
LV version is 2014 14.0f1
Targeting a sbRIO-9636, which is not installed on this PC
Thoughts, anyone?
Cheers!
MADman
Solved!
Go to Solution.

sdmadman wrote:I installed 2013Xilinx14, so I wonder if Compile Worker is looking in the wrong place for the compiler (it quits just after creating the VHDL code).
You need to install the LabVIEW 2014 Xilinx Tools. 2013 comes with Xilinx 14.4.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

My sharpening tools are not working. Can somebody help?

My sharpening tools are not working. Can somebody tell me how to get the tools restored to the way they were when I first downloaded the software? Thanks in advance

Hello Kellyjordan!
In addition to Silkroosters great instructions, I have attached a visual to assist you.
Hope that helps you in your quest,
Janelle

TS3297 Everytime i purchase from the apps store it always show the security questions and i cant buy the apps i want because the questions are not answerable. Pls help....

Everytime i purchase from the apps store it always show the security questions and i cant buy the apps i want because the questions are not answerable. Pls help....

I think you need to reset those questions. You'll need to call the tech support for your country, ask to be connected to the Account Security Team and then ask if they can reset the questions for you.
http://support.apple.com/kb/HE57

The lines I create with the pen tool are not showing up in After Effects.

I'm working on a project where I need straight lines. I've added the lines using the pen tool on solid layers, but they are not showing up before or after rendering. I can see where they are supposed to be when I isolate the layer they are on. I have the lines at one pixel, solid white and the layers are on top of everything else. I took a screen shot. Can anyone help me?

Well, I am still not 100% sure why the pen tool lines/masks are not showing up but I was able to work around it. I already had the stroke effect applied and set to all masks. Looking into this though, it seemed that they were only not showing up on the new solid layers I had created. I duplicated the layers the masks were working on instead and it seems to resolve the problem for now. Thanks for your help!

Comments are not displaying normally (Ref: TA-20964)

Status: Investigating
Affects: Some users
Description: Users have been reporting that their comments are not displaying and have been replaced with a Tagged TOS image.
We're currenly working to resolve this issue to get your comments back up as normal. Thank you all for your patience!
Please feel free to Contact Us to report this issue or you can click 'Me Too' on this post to let us know.

Win 7.
I see the entire page here in IE9, IE8 (Compatibility View), Firefox and Chrome.

Why CAN tools are not showing under Measurement IO in LabVIEW 8.2? NI CAN 2.3.2 is installed

Hi,
The CAN tools/API are not showing in LabVIEW .I am using LabVIEW 8.2 Evaluation Version.
NI-CAN 2.3.2 is also installed. Why it happened?
Anybody please reply

Hi Pree,
NI-CAN 2.3.2 was released in 2005 (before LabVIEW 8.2 got released in 2006) and thus does not support it. Any newer NI-CAN version has support for LabVIEW 8.2 (I recommend using the latest version):
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0EDC?opendocument&node=1...
The NI-CAN readme file lists the supported programming environments.
-B2k

Design and Configration tools are not opening

Dear All,
We are opening first time the XI int builder page which is opening and when i click on Design and Config tools, these pages are getting hanged for a long time and not at all these tools are opening. few times 50004 port is not opened error we getting.
XI version is XI 3.0 and i have installed jdk 1.4.2.
Can any one help in this regard what could be the reason for not opening these tools.
Thanks in advance,
Siva

Hi Siva,
1 ) From the home page navigate to Administration >Java Web Start Administration>click the tab Restore Archives and Generate new Signature.
2) Open your Java Plugin from Control Panel and uncheck check for updated automatically.
Regards,
Mahesh.

3D Mode Tool are not working in Photoshop CS6

Hello everyone. First, I want to tell you that I use ATI Radeon HD 6730M with 12.2 driver series. and I just found out that my Photoshop CS6 3D mode tool not working in advanced drawing mode, like this.
As well as normal drawing mode. Please help to fix this problem.

When you changed the options in the Preferences - Performance - Advanced Options section, did you close Photoshop and restart it before testing? That's necessary or you won't be testing what you think you are.
Assuming you have done so, if you have exhausted the various GPU options, I don't think you have any other options beyond waiting for a new and improved display driver. I suppose it's possible the Adobe folks might improve their code to make it work better on different setups, but generally speaking these kinds of things seem to be glitches in the display driver.
I just tried a similar operation to what you're doing on my Radeon HD 5670 with Catalyst 12.6 drivers and it seems to work okay.
-Noel

Dreamweaver CS4 Properties tools are not displaying properly

I've had this problem for a while now and would really like to find a solution for this. My tools in the Properties screen are cut off on the bottom and do not fully display, whether I choose the HTML or CSS button on the left-hand side. Really annoying. Can someone help me fix this?
I'm using version 10, Build 4117
Thanks for any advice you can offer!

Hi
See - http://forums.adobe.com/thread/446724.
PZ

SAP BI Client tools are not communicating with BO server

Hi Experts,
We've recently installed BI 4.1 . We're having few issues:
1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place?
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
8. Do we need to install all these on client machine?
9. Could you please give me software list which should be installed on client machine?
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
Thanks in advance.

1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
Could you confirm that you are able to ping the BO server from Client machine. Also use telnet command from commandline of CMD in client machine. It will help to confirm that port communication is successful. Use ipaddress:cmsport for the system while logging into the client software. Update the hosts file entries at client machine with BO server name and ip address. Create an exception for BO installation location at client machine and check the results
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
Check on the server side first where your web server is installed (I am assuming tomcat in your scenario). Use http://serverame:8080/BOE/BI and http://servername:8080/BOE/CMC (8080 is default port. If it has been changed use the correct port).
If its working well. Perform the same activity using ipaddress:8080 at server. Next chek whether using the same URL you are able to get BILaunchPad and CMC pages and able to login from the same.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place (https://service.sap.com)?
Software and downloads-->Installations and Upgrades
- D" SBOP DASHBOARDS (XCELSIUS)
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
Look into the admin guide for installation pre-requisites. These are available at Analytics Knowledge Center
We have a drop down for all products. Look for the guide and proceed with the installation.
8. Do we need to install all these on client machine?
Dashboard,Lumira,analysis office, CRE and CR2013 are client tools and hence need to be installed on client machine.
We also have CRS 2013 which is a server software and has to be downloaded from service market place. The li
9. Could you please give me software list which should be installed on client machine?
These vary according to user requirements. Check with developers for their softwares needed
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
In BI4.1 LCM comes by default. It is a server application. You can find it in CMC named as Promotion management and version management.
Use the admin guide and installation guide for all of the above. It will help you.

My selection & direct tools are not working properly. What could be the problem?

I can't select my selection & direct selection tools from my tool bar. The shortcuts are working but even when an object is selected I can't edit the color of the object. When the mouse hoover the selection tool icon it does not highlight like the rest of the tools. The mouse is working fine in other Adobe applications and I never have a problem before. T his just happened suddenly. I read one post where the person had a problem similar to mine and I applied the suggestion that was given of changing the Theme for Windows 7 but I still have the same problem. I'm working in CS5 and my OS is Window 7. I will appreciate any help. Thanks

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Tools are not answering normally

Similar Messages

Maybe you are looking for