Tools defaulting to the pen tool

When using Ai CS6 I'm finding that no matter what tools I have selected Ai keeps defaulting to the pen tool, useually Delete Ancor. This is incredibly frustrating... Is anyone else experiencing this, or have I just not set somyhning correctly??
Any help would be most welcome. Cheers Cathy.

Sorry didn't make myself very clear...
I am working in Ai CS6 using a Wacom Intuos Tablet. What was happening was that every time I used to scroll wheel on the tablet the tool changed to one of the pen tools. I found a work around (via google) that involved turning off the keyboard shortcuts for zoom in Ai and as I only ever use the tablet to zoom the fix, while not ideal, is working at the moment.
Interestingly, the keyboard shortcuts for zoom in and out are very similar across CS but the problem was only happening in Ai.
Cheers Cathy

Similar Messages

  • Using the pen tool, how best should I build or construct this image?

    Hello,
    I'm trying to recreate a certain image with the pen tool.
    I have already tried using Live Trace using the "Simple Trace" setting. Live Trace did a pretty good job but not with enough accuracy or fidelity to the original image as I would like.
    I am pretty rusty with Illustrator now, but I remember from past lessons that the basic idea is that artwork in Illustrator is divided into layers, objects, and elements within objects. But one of the biggest principles with Ilustrator is the order these layers, objects, and elements are stacked. Elements are stacked to create an object. Objects are often stacked, each object on its own layer, to create the entire piece of artwork.
    Also, the lower an element, object, or layer is in a stacking order, the further towards the back it appears in the image.
    Also, the higher an element, object, or layer is in a stacking order, the closer to the front it appears in the image.
    So, in Illustrator, you don't so much draw or paint a piece of artwork, but, instead, creating artwork in Illustrator is more a matter of building it or constructing it.
    So, with all that said, below I have an object I would like to create with the pen tool. It is a fleuron. It is at least fairly complex.I am not sure how to build it or construct its parts. What would come first, second, third? What would be on the bottom layer, middle layer, top layer, etc.? 
    I know there is no one way to reproduce this object with the pen tool. Whatever way you would use or would like to share is fine. I guess, more specifically, I'm not afraid of rigor and working hard, but I'm also not necessarily looking for rigor. Instead, what I am looking to do is work smartly and efficiently. I'm looking for what might commonly be considered "best practice." 
    So, how would you advise I approach the object below? How should I build or construct it?
    Thanks!  : )

    As for the simple graphic itself, this is what I would end up with:
    One Group containing:
    One red-filled, unstroked Compound Path consisting of three subpaths.
    One white-filled, unstroked Compound Path consisting of 18 subpaths.
    The reason I would compound the red paths and the white paths is simply so I could apply to them different fills with one move, should I want to.
    The reason the two Compund Paths would be grouped is simply so the whole graphic can, when finished, be moved, rotated, scaled, flipped, skewed (i.e.; transformed) as if it were a single object. (Which it would be; a Group is a logical object, just as a "set" is a logical object.)
    As for how I would actaully draw the graphic:
    First I would roughly evaluate it to get an idea of what I want to end up with in terms of clean, tidy, paths (as already describe above.)
    Second, I mentally devise a "plan of attack" by which to achieve that; just studying the shapes a little more deeply for anything that can be exploited to minimize the work:
    Are there any repetitive elements of the shape that can be accomplished by duplication, moving, scaling?
    Is there any symmetry that can be accomplished by duplication and flopping?
    Is there any simple geometry that can be accomplished with basic shape prmitives (whole or partial ellipses, rectangles, polygons)?
    Third, I always try to also consider whether the process of drawing the current graphic and/or portions of it might be of future use to me, and if so, can I exploit other software features to save me time and effort later. For example, consider a single one of the ess-shaped "coils" of the middle tapered "spiral" grouped together with its white highlight. Such a graphic, colored in black and white and stored as an ArtBrush with its Colorization set to Hues & Tints would let me stretch and scale that basic shape along other-shaped paths. Similarly stored as a PatternBrush, it might do multi-duty for many things suggestive of coils, like rope or jewelry chains.
    Then I just start drawing the necessary paths, using my default Graphic Style (.25 black stroke, no fill). As I proceed, I store (as Brushes, Symbols, etc.) any intermediate things that I think I might find useful later. For the graphic at hand, I then optimize the paths I've drawn by combining them (cutting, joining, path operations) into the fewest, cleanest, and simplest paths necessary to define the shapes. I then store the finished graphic as a Symbol, Brush, etc. if I think it might be of use later.
    Regarding Layers, Groups, etc., etc:
    It sounds like you (like many beginning AI users) are way over-thinking the matter of stacking order. Yes, it's good to use some sensible amount of organization as your illustrations and designs become more elaborate, but you don't have to fret so much over it. The principles are very very simply.
    Layer really don't even enter into my mind when creating such a graphic, because the paths of which it consists are all going to be grouped, and all the contents of a Group have to exist on the same Layer anyway. Multiple Layers would only come into play when this whole graphic is used as one element in the overall page layout. For example, suppose several instances of this object will exist on a page layout to serve as dividers between ads or stories arranged in columns in a page layout. I may choose--if it makes organizational sense to me--to put all the copies of this object on a Layer dedicated to them. The Layer on which they reside may or may not include other graphics; it's just a question of what makes organizational sense and editing convenience to me while I'm working the file. For example, having the copies of this graphic on a separate Layer would allow me to lock that Layer to avoid accidently selecting the graphics when I'm editing text objects that I've organized on another Layer.
    Don't think of Layers as some oppressive "right or wrong" thing that you have to decide upon at the start of every little thing you draw. It's nothing but an organizational convenience that is driven almost entirely by common sense. The mechanics of it are really very very simple in principle.
    Look: Everything you create or import in an Illustrator document is an object. Just like sheets of paper in a tablet, each of those objects (each path, text object, raster image) is going to reside somewhere in the z-order (think front to back) of the document's object stack. You can't do anything to prevent that. It's the way the program works. The file is basically just a list of things that the output device has to draw. Being a list, it has a first object, a second object, and so on. Objects higher in that list are nearer the "front"; objects lower are nearer the "back." Normally, objects in front obscure objects behind them, wherever they "overlap."
    Now, considering that what you have is just a list of objects, as that list grows and grows, doesn't it eventually just make sense to be able to "bracket" or "label" contiguous portions (contiguous is key here) of that list for organizational and manipulative purposes? That's all Groups and Layers are; brackets around sections of the list.
    Consider that an Illustrator file (like most computer files you create) is really just a text file. So suppose you have written a technical manual in a word processing program. Would you write that manual as one big, honkin' text string, or would you "bunch together" contiguous portions of the story under some labeling scheme of subheads? After that, wouldn't you similarly "bunch together" contiguous subhead sections as chapters?
    So you can think of Groups as "subheads," and Layers as "chapters" in your Illustrator document's list of objects.
    Sure; if you're working on a page layout document, sometimes it makes sense to go ahead and set up some of this structure at the start (just as when writing a book, it makes sense to start with an outline). So you might go ahead and define a Layer for printer marks, another for the diecut, another for text, another for images, another for background fills.
    The very next designer might decide to structure the very same project a little differently. He might, for example, decide there's no reason not to keep the text objects on the same layer with the raster images. There's no hard & fast right & wrong her. You do what makes sense for the project at hand.
    Now in this context, back to your simple graphic: I don't need a PrinterMarks Layer, a DieCut Layer, or a TextObjects Layer to draw this graphic. I just need the default Layer 1. For convenience, I may want to add a TraceThisStuff Layer onto which I put the original raster image, just so I can conveniently isolate it (lock it, dim it, etc.) while drawing the paths on Layer 1. On the other hand, I can really just as easily leave the raster image that I want to trace on Layer 1 and reduce its opacity and lock/unlock it at the object level. It's up to me.
    But for that matter, revisit my "third level" of evaluation described above. In reality, I would very likely not even start drawing this graphic in the document for which it is intended. I would just as likely open an existing JET_Dingbats.ai or a JET_Ornaments.ai or CustomerName_StyleGraphics.ai file or template, draw the graphic there and when done, just copy it and paste it into the current document file. That's how you, over time, build yourself a reasonably organized "personal library" of re-usable resources that save you countless hours of repetitive work in the future.
    JET

  • Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

    I used the pen tool constantly in photoshop cs6 and would often use control + left click to select a different shape while still using the pen tool.
    I'm now forced to switch to the move tool to select another layer? Why was this feature removed / changed?
    Fix: After fooling around more, here is how I fixed it:
    The new Direct Select Tool by default is set to "active" layers. Switch it to "all layers"
    Message was edited by: Joe Horan

    A new problem = Selecting multiple points with control + click + drag is selecting ALL shape layers... Jesus christ, why was this changed????
    I now have to double click the shape I want to select? Why? What is the point of this?

  • Using the pen tool question

    How do I stop the pen tool from wanting to add to paths under what I'm trying to draw when it touches another anchor point?

    Ridiculous as it is, in Illustrator you are actually supposed to:
    1. Mousedown some distance away from where you want the new path to begin (away from the endpoint of the unselected pre-existing path).
    2. Press and hold the Spacebar.
    3. Drag to where you want the new path to begin. Mouseup. (The point will be placed without the infernal auto-join behavior.)
    4. Release the Spacebar.
    The Pen has no business affecting unselected paths by default. It violates the entire meaning of selection. Worst-of-class Bezier drawing interface.
    JET

  • I am using CS6 and when I use the pen tool, it deletes the inside image not the outside image

    I have been using photoshop cs5 and cs6 for a while but I have never encountered this problem. Whenever I use the pen tool to trace an object and I close the traced object, it deletes the object i traced and not the background. It is really anoying and I cant change it. I have spentt a fair amount of time trying to change it but i dont know how. Can someone please help I have also looked online but there is nothin to help.
    Thankyou Alex

    Hi,
    It's probably the path operations setting.
    The default setting in photoshop cs6 is Exclude Overlapping Shapes and you could also use Combine Shapes.

  • Where's the pen tool in soundtrack pro

    I am used to adjusting audio levels in FCP using the pen tool and adding key frames. I don't see how you can do that in STP. The only volume adjustment it makes is global.
    Please help

    The keyframes show up on the envelope rows. You can get them to show up in the mulitrack view by clicking the little disclosure triangle to the left of hte track name in the track header. (See over there by where it says "Trk 1"? That thing.)
    Two purple rows show up for volume and pan. You can create envelope points by double-clicking on the line, and then dragging the resulting point up and down to set the level.
    If you want to have more control, hit F2 go to the mixer view. Up at the top of the mixer window there's two pop-ups. One says the name of the project, and the other defaults to "Read". That means that Soundtrack will read the envelopes and animate the faders. If you set that to "Latch" or "Touch", start soundtrack playing, and then jiggle some faders, you will record a bazillion envelope points. (I'll let you refer to the documentation for the difference between Latch and Touch.)
    Remember to set it back to Read so you don't accidently whomp your envelope points later!

  • How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
    http://adobe.ly/STegFg

    With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

  • Photoshop CC - Making the Pen Tool on a new layer?

    So I've never had this problem in previous versions of PS. When selecting the Pen Tool and drawing on the document usually leads to it making a new shape layer. However for some reason this option is greyed out in CC. As a workaround I've had to draw a shape box, then draw with the pen tool and delete the shape box afterwards. Is there a reason for this, a bug or something I'm missing?
    Thanks

    It should not be grayed out Pixels are grayed out.

  • Help with using the pen tool

    I have a few different problems with the pen tool.
    1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.
    If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
    How can I stop this from happening?
    2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
    How can I type on the third path?
    3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
    Thanks.

    Ok, the first example would be something like this. Pretending the lines go elsewhere, say I've drawn a path with the pen tool, gone round the bottom box and that then goes round the two lines going down. So if I go down the one on the left side it hits the previous path I did, but to go up the line on the right side I'd need to go across there. But if I make a point where the two lines meet to do this it then throws the line off elsewhere.
    I did have snap vector tools on but it does that without it on.
    The next one I was creating a car speedometer so it has lines on the outside, dots inside of that and then, where I've done the blue circle, would be the third path where I then write the numbers in. But I can never write on that third path.
    And finally, the pen tool and I think it dd have Shape Dynamics set. I've changed a couple of things and it looks a bit better now so I think that should be ok. Thanks
    I know I haven't shown the panels but I haven't got any for the first as it won't go right so I deleted what I was doing. And each thing I've done is on a different layer for the speedometer, all just paths created with the circle tool with the text on.

  • Using the Pen Tool in Flash

    I'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series.  I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage.  Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape.  In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
    Am I doing something wrong?  The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible.  I should point out that the instruction states that the pen tool line should extend off the stage.  I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
    If you have any suggestions as to why this may be, I would be greatly appreciative.
    Chris

    Thanks Ned,
    I think I worked out the problem; I think that part of the instruction was missing.  When I looked at the picture again, I noticed that there were anchor points around the stage, so I guess that was what I missed.  I was simply creating the wavy line across the stage, and then clicking on the first anchor point to close the shape.  I resolved the problem by creating three anchor points around the stage and then closing the image by clicking on the first anchor.
    Thanks again for your help Ned.
    Chris

  • What happened to the 'Shape Mode' shortcut keys on the Pen Tool?

    For the longest time I've used both the Shape and Pen Tools for drawing vectors in Photoshop, but with CS6 I noticed a lot of weird behaviours. The one that is really getting to me is the lack of 'Shape Mode' shortcut keys when using the Pen Tool. When on the 'Shape Tool', fo example Cirle or Rectange, you can press the Shift to change the Shape Mode to 'Add', Alt to change it to 'Subtract' or both together to get 'Intersect'. This functionality used to exist on the Pen Tool too, but in CS6 I can't seem to get it working.
    A collegue suggested to move over to Illustrator for all my Vector needs, and I know that this a good advice. However the lack of quick/integrated changing between 'Shape Modes' in either product (now) makes drawing things alot slower (for me).
    Am I missing something, or is this feature now ommited in Photoshop CS6. If it is does anyone know if its possible to script something to allow this kind of behviour in Photoshop or Illustrator?
    cheers,
    Jon

    The modifier keys "Alt|Opt", "Ctrl|Cmd" and "Shift" work differently depending on the tool being used but the individual keys seem to provide somewhat related functions.
    For example the "Shift" key tends to be a constraining key Rectangle tools are constrained to square ellipse tools to Circles. However if there is an Active selection when you hold down the skey when you drag out a new selection it does not reset the current selection instead the new selection is not constrained and is added to the current selection. Shift constrains Transform tool to current aspect ratio,  Shift constrains Line tools to vertical, horizontal or 45 degree angles. Pen tool like line tool shift constrains the angle.
    The "Alt|Opt" key changes the way tools operate. Transforms are from the center not from the side or corner being dragged.  Selection tools like the rectangle and ellipse will cause the intal drag out be from the center however it there is a Active selection dragging out a new selection will be subtracted from the current selection. This key changes the Pen tool from draw mode to anchor point adjusting.
    The "Shift" and "Alt|Opt" modifier keys can be used together to have an operation be both constrain and from the center.
    The "Ctrl|Cmd" key seems to change the way a tool works on a control anchor point.  The Pen Tool changes from Pen Draw mode to Direct Selection tool to facilitate moving the point.  Transform can be distorted a single corner point can be moved and distort the rectangle bounding box.
    These keys may have other functions I don't know about.  Photoshop has many features so many I don't know if any one person know and uses all of them. For the rest of us they seem to be Photoshop hidden secrets.

  • Photoshop CS4 Crash Using the Pen Tool

    We have experienced an issue where creating a line/path using the Pen tool in Photoshop CS4 caused a system-wide freeze, regardless of operating system, other software installed, etc....
    Not even a kernal panic, but just a complete freeze.
    We found that it only occurred on our white, 24-inch iMacs (2.16 Ghz Intel Core 2 Duo). I tried it on 5 different white iMacs, with various builds of Tiger or Leopard, and they all froze up completely.
    We had a plain 10.5.8 image on one of the white iMacs, with nothing extra except Photoshop CS4, and it froze up completely using the Pen Tool on a new document as well.
    Oddly enough, the workaround was having Photoshop CS4 run using Rosetta, and then the Pen Tool works fine. It is odd considering the iMacs have Intel processors, and not PowerPC that would need Rosetta.
    I have not found anyone else with hardware specific issues like this. So, I thought i should share our (hopefully) temporary workaround.

    A complete system freeze means a kernel or driver level bug, or a hardware problem.
    Rosetta won't process as fast - meaning that the processor is less taxed, and it may call the drivers differently.
    Upgrading to MacOS 10.6 might avoid driver problems (that were in 10.5), but hardware issues would remain.
    But first you might try disabling OpenGL drawing in preferences (avoiding the most problematic drivers, and reducing the load in the graphics hardware).

  • After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

    I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
    My specs:
    iMac
    21.5-inch, Mid 2010
    Processor  3.06 GHz Intel Core i3
    Memory  12 GB 1333 MHz DDR3
    Graphics  ATI Radeon HD 4670 256 MB
    Software  OS X 10.8.2 (12C60)
    Anybody else having this problem or have a solution?

    So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

  • FW CS4 crashes when using the pen tool for many points

    Good morning,
    Every time I try to create a mask with the pen tool that
    requires a good
    amount of points, FW crashes. I've had this happen with CS3
    as well, but
    with CS4 , it crashes with many less points than CS3 - has
    any one
    experienced this, and more to the point, any solutions?
    Aloha,
    Jerry
    http://MauiWebDesigns.com

    "FatCat" <[email protected]> wrote in message
    news:gkga3u$gtc$[email protected]..
    > Hi Al,
    >
    >> I find I use CS3 for all tasks except for the few
    that require the new
    >> features in CS4. Both DW and Fireworks CS4 are giant
    grey hawgs :-)
    >
    > I knew I should have stuck with CS3!
    >
    > My Bridge quit working, and I figured that was Nature's
    way of telling me
    > to upgrade. I spent all of a weekend trying to download
    the software
    > (akamai means smart - what a misnomer!), then when it
    finally downloaded
    > the installation was corrupt - did that three times -
    took all night to
    > download, with a lot of stalls and freezes.
    >
    > Then on Monday I call customer service and they tell me
    that that download
    > is too large - why offer it, then?
    >
    > Anyway, I bought the DVD, got it a few days later,
    installed it and Bridge
    > still didn't work! Turns out that my anti-virus somehow
    kept it from
    > working! I don't know why, since it was working
    previously. Anyway, now I
    > have CS4, but it doesn't work as well as CS3, as you'd
    warned me - shoulda
    > listened to Uncle Al! ;o) It only cost me $600 plus the
    lost weekend and
    > the hassles of using a glitchy program - live and learn!
    >
    > However, I'm an eternal optimist - haven't lost hope
    that this will get
    > fixed.
    I'm optimistic too. I think it will start to sort itself out
    when Intel's
    new 24-Core 128-bit processors hit the market in conjunction
    with Windows 8
    and OS X Cervelat.
    Al

  • Better ways to work with the pen tool

    I'm finding the pen tool a real aggravation to use... first off you cannot hardly see the points once a path is completed.  Even blowing the artwork up really big doesn't help much.
    Then its really easy to loose the ability to move individual points... at least I've found that at one point I can select and move the points easily with keyboard and somehow I loose that ability and seems to difficult to regain it.  Instead I'm moving the whole path.
    I wondered if any of the plugins out there might be dedicated to making the pen tool points easier to manipulate and edit.  Just making them easily visible would probably be enough.

    Jacob Bugge wrote:
    Harry,
    The Direct Selection Tool is the one to use for moving Anchor Points after the path has been drawn. Always work on paths without anything selected when you start; this is one place where Smart Guides are your friends because they let you see highlights of what you may select.
    If you Click an Anchor Point, you will see that it is shown as a filled square; the other (non selected) Anchor Points are shown as hollow squares; you can select additional Anchor Points by ShiftClicking them.
    With the desired Anchor Point(s) chosen, you may ClickDrag (either of them), or use the Arrow keys, or Object>Transform>Move, to move it/them.
    You can also ClickDrag across the desired Anchor Point(s), starting from an empty spot with no fill (normally outside the path).
    If I'm following you above... I do not see that behavior here.  I speaking particularly of your third and fourth points.
    You are talking about doing point 3 and 4 with direct select right?
    To make it simple I'll just work with one point on a closed path  :... I first click on an empty part of art board, then click a single point.  At that point all the points light up and show there handles.  The clicked one is a solid red dot, the others are a hollow dot with red stroke.
    Now according to what I got of your comments, I should be able to move that single selected point with the arrow keys.... but I cannot.
    Far as point 4, same thing applies... It is good to know that I can select multiple points that way, but after selecting ... the keyboard arrows do nothing to the selected points.   But at least I can quickly pull mutiple points around with the mouse... so thanks for that bit.
    Are you able to select a point on a closed path, and control it with arrow keys?
    Is there some circumstance I may have initiated inadvertantly that would prevent the arrow keys moving points around.
    I pretty sure there was while early on where I was moving individual points with keyboard but cannot get it to happen now.

Maybe you are looking for