Tools for FrameMaker wiki markup?
I'm looking for ways to get our FrameMaker-source content into a wiki with minimal prep and cleanup required (i.e. preserving cross-references, graphics, TOCs, etc.). I'm also evaluating wikis, so the exact target is tbd and may depend partly on its import capabilities. We have RoboHelp (which we use to generate context-sensitive WebHelp) and MIF2Go. Could buy something else if the results were good.
We looked at Webworks' export. It looks great, but isn't editable wiki markup, so not what we're looking for.
As an example of the kind of kludge I'm hoping to avoid, a case study on going from Frame to Confluence via prep with FrameScript, generating Java Help with MIF2Go, and converting the Java Help to wiki markup with a FAR script:
http://confluence.atlassian.com/display/DISC/Framemaker+native+to+Confluence+-+case+study
I tried generating .rtf with MIF2Go, converting that to .doc, and using Confluence's Word import, results are pretty rough.
I ran across this example at the cudspan site. It's sketchy but may give you some ideas.
http://www.cudspan.net/TocuWiki/
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Similar Messages
-
Recommended tool for technical illustrations to be embedded in FrameMaker document?
I'm new to Framemaker and don't know, if this is the right tool for me.
I have written a technical document of about 500 pages using MS-Word. Now I want to figure out, if FrameMaker would be a good alternative. I think it could be.
But one of my needs is to be able to create technical illustrations (diagrams with shapes with text and arrows, lines and arrows linked to the shapes when repositioned).
In my opinion the capabilities of FrameMaker to create such illustrations are very limited.
Currently I create the illustrations using MS-Word-2010. I think concerning illustrations MS-Word is more capable than FrameMaker.
On the other hand the capabilities of Adobe Illustrator are plenty too much for me.
Can you recommend some external tool for creating illustrations, which can be easily integrated into a FrameMaker document?
Regards,
MartinImport the ai file directly into the FrameMaker doc.
Select where you want the illustration to be located (use the smart select tool and click on the area in your text flow)
File>Import>File
If you want to have the illustration in the document to automatically update when the drawing changes, select Import By Reference.
Once imported you have the option of positioning where you want it to be located relative to the text.
Right click the anchored frame, select Anchored Frame
Select the Anchoring Position, Alignment, etc.
Adobe Illustrator is all you need to create quality Technical Illustrations.
http://tekarttechnicalillustration.blogspot.com/2011_08_01_archive.html
http://tekarttechnicalillustration.blogspot.com/2011/07/glassware.html
http://tekarttechnicalillustration.blogspot.com/2011/05/line-illustration.html
For premade elements get familiar with your symbols libraries. -
Where is the "trusted source" for FrameMaker 12?
When I run a script from a command line, I get the "You are about to run a script in Adobe FrameMaker 12. You should only run a script from a trusted source." Etc. The ExtendScript Toolkit docs say "the user-script folder of installed Adobe applications". Any idea where this would be for FrameMaker 12? Thanks.
-RickUntested, but p.18 of the Javascript Tools Guide has this to say:
Adobe Scripts folder
On first launch, the Toolkit creates a folder named Adobe Scripts in the user's Documents folder. The
Default favorite in the Scripts panel displays the contents of this folder.
When double-clicking a JSX file, the Toolkit normally acts as an invisible security filter. Before actually
launching the file, a security dialog asks if it is OK to execute the script. The Toolkit treats the user's
Documents/Adobe Scripts folder, however, as a trusted location; when you double-click a JSX file in that
folder, the Toolkit does not display the security alert.
In WIndows, that is "%userprofile%\Documents\Adobe Scripts". -
Custom edit form for my Wiki Page library with only "Page Name" field included
I want to create a new custom edit form for my Wiki page library, and to only allow users to edit the Page name inside the edit form. now i created a new Edit form using SharePoint Designer , and i select the Enterprisewiki content type for it , which generates
the following markup :-
<%@ Page language="C#" MasterPageFile="~masterurl/default.master" Inherits="Microsoft.SharePoint.WebPartPages.WebPartPage,Microsoft.SharePoint,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" meta:webpartpageexpansion="full" meta:progid="SharePoint.WebPartPage.Document" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Assembly Name="Microsoft.Web.CommandUI, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
<SharePoint:ListFormPageTitle runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea" runat="server">
<span class="die">
<SharePoint:ListProperty Property="LinkTitle" runat="server" id="ID_LinkTitle"/>
</span>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server">
<img src="/_layouts/15/images/blank.gif?rev=23" width='1' height='1' alt="" />
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
<SharePoint:UIVersionedContent UIVersion="4" runat="server">
<ContentTemplate>
<div style="padding-left:5px">
</ContentTemplate>
</SharePoint:UIVersionedContent>
<table class="ms-core-tableNoSpace" id="onetIDListForm">
<tr>
<td>
<WebPartPages:WebPartZone runat="server" FrameType="None" ID="Main" Title="loc:Main"><ZoneTemplate>
<WebPartPages:DataFormWebPart runat="server" EnableOriginalValue="False" DisplayName="Customer Service KB" ViewFlag="1048584" ViewContentTypeId="" Default="FALSE" ListUrl="" ListDisplayName="" ListName="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}" ListId="6a6ece84-4d39-48e2-bd6a-c20b2ac6355b" PageType="PAGE_EDITFORM" PageSize="-1" UseSQLDataSourcePaging="True" DataSourceID="" ShowWithSampleData="False" AsyncRefresh="False" ManualRefresh="False" AutoRefresh="False" AutoRefreshInterval="60" NoDefaultStyle="TRUE" InitialAsyncDataFetch="False" Title="Customer Service KB" FrameType="None" SuppressWebPartChrome="False" Description="" IsIncluded="True" PartOrder="2" FrameState="Normal" AllowRemove="True" AllowZoneChange="True" AllowMinimize="True" AllowConnect="True" AllowEdit="True" AllowHide="True" IsVisible="True" DetailLink="" HelpLink="" HelpMode="Modeless" Dir="Default" PartImageSmall="" MissingAssembly="Cannot import this Web Part." PartImageLarge="" IsIncludedFilter="" ExportControlledProperties="True" ConnectionID="00000000-0000-0000-0000-000000000000" ID="g_f1c88e12_e91d_4300_91f2_62f0bd7825fb" ChromeType="None" ExportMode="All" __MarkupType="vsattributemarkup" __WebPartId="{F1C88E12-E91D-4300-91F2-62F0BD7825FB}" __AllowXSLTEditing="true" WebPart="true" Height="" Width=""><DataSources>
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" SelectCommand="<View><Query><Where><Eq><FieldRef Name="ContentType"/><Value Type="Text">Enterprise Wiki Page</Value></Eq></Where></Query></View>" UseInternalName="True" UseServerDataFormat="True"><SelectParameters><WebPartPages:DataFormParameter ParameterKey="ListItemId" PropertyName="ParameterValues" DefaultValue="0" Name="ListItemId"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="weburl" PropertyName="ParameterValues" DefaultValue="http://sharepointdev:12341/sites/wiki1" Name="weburl"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="ListID" PropertyName="ParameterValues" DefaultValue="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}" Name="ListID"></WebPartPages:DataFormParameter>
</SelectParameters><UpdateParameters><WebPartPages:DataFormParameter ParameterKey="ListItemId" PropertyName="ParameterValues" DefaultValue="0" Name="ListItemId"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="weburl" PropertyName="ParameterValues" DefaultValue="http://sharepointdev:12341/sites/wiki1" Name="weburl"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="ListID" PropertyName="ParameterValues" DefaultValue="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}" Name="ListID"></WebPartPages:DataFormParameter>
</UpdateParameters><InsertParameters><WebPartPages:DataFormParameter ParameterKey="ListItemId" PropertyName="ParameterValues" DefaultValue="0" Name="ListItemId"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="weburl" PropertyName="ParameterValues" DefaultValue="http://sharepointdev:12341/sites/wiki1" Name="weburl"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="ListID" PropertyName="ParameterValues" DefaultValue="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}" Name="ListID"></WebPartPages:DataFormParameter>
</InsertParameters><DeleteParameters><WebPartPages:DataFormParameter ParameterKey="ListItemId" PropertyName="ParameterValues" DefaultValue="0" Name="ListItemId"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="weburl" PropertyName="ParameterValues" DefaultValue="http://sharepointdev:12341/sites/wiki1" Name="weburl"></WebPartPages:DataFormParameter><WebPartPages:DataFormParameter ParameterKey="ListID" PropertyName="ParameterValues" DefaultValue="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}" Name="ListID"></WebPartPages:DataFormParameter>
</DeleteParameters>
</SharePoint:SPDataSource>
</DataSources>
<Xsl>
<xsl:stylesheet xmlns:x="http://www.w3.org/2001/XMLSchema" xmlns:dsp="http://schemas.microsoft.com/sharepoint/dsp" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:x="http://www.w3.org/2001/XMLSchema" xmlns:dsp="http://schemas.microsoft.com/sharepoint/dsp" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">ListForm</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/Rows/Row"/>
<div>
<span id="part1">
<table border="0" width="100%">
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows"/>
</xsl:call-template>
</table>
</span>
<SharePoint:AttachmentUpload runat="server" ControlMode="Edit"/>
<SharePoint:ItemHiddenVersion runat="server" ControlMode="Edit"/>
</div>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<tr>
<td class="ms-toolbar" nowrap="nowrap">
<table>
<tr>
<td width="99%" class="ms-toolbar" nowrap="nowrap"><IMG SRC="/_layouts/15/images/blank.gif" width="1" height="18"/></td>
<td class="ms-toolbar" nowrap="nowrap">
<SharePoint:SaveButton runat="server" ControlMode="Edit" id="savebutton1"/>
</td>
<td class="ms-separator"> </td>
<td class="ms-toolbar" nowrap="nowrap" align="right">
<SharePoint:GoBackButton runat="server" ControlMode="Edit" id="gobackbutton1"/>
</td>
</tr>
</table>
</td>
</tr>
<tr>
<td class="ms-toolbar" nowrap="nowrap">
<SharePoint:FormToolBar runat="server" ControlMode="Edit"/>
<SharePoint:ItemValidationFailedMessage runat="server" ControlMode="Edit"/>
</td>
</tr>
<xsl:for-each select="$Rows">
<xsl:call-template name="dvt_1.rowedit"/>
</xsl:for-each>
<tr>
<td class="ms-toolbar" nowrap="nowrap">
<table>
<tr>
<td class="ms-descriptiontext" nowrap="nowrap">
<SharePoint:CreatedModifiedInfo ControlMode="Edit" runat="server"/>
</td>
<td width="99%" class="ms-toolbar" nowrap="nowrap"><IMG SRC="/_layouts/15/images/blank.gif" width="1" height="18"/></td>
<td class="ms-toolbar" nowrap="nowrap">
<SharePoint:SaveButton runat="server" ControlMode="Edit" id="savebutton2"/>
</td>
<td class="ms-separator"> </td>
<td class="ms-toolbar" nowrap="nowrap" align="right">
<SharePoint:GoBackButton runat="server" ControlMode="Edit" id="gobackbutton2"/>
</td>
</tr>
</table>
</td>
</tr>
</xsl:template>
<xsl:template name="dvt_1.rowedit">
<xsl:param name="Pos" select="position()"/>
<tr>
<td>
<table border="0" cellspacing="0" width="100%">
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Title (Display In Search)</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Title" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Title')}"/>
<SharePoint:FieldDescription runat="server" id="ff1description{$Pos}" FieldName="Title" ControlMode="Edit"/>
</td>
</tr>
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Standard<span class="ms-formvalidation"> *</span>
</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff2{$Pos}" ControlMode="Edit" FieldName="Standard" __designer:bind="{ddwrt:DataBind('u',concat('ff2',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Standard')}"/>
<SharePoint:FieldDescription runat="server" id="ff2description{$Pos}" FieldName="Standard" ControlMode="Edit"/>
</td>
</tr>
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Document Type<span class="ms-formvalidation"> *</span>
</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff3{$Pos}" ControlMode="Edit" FieldName="Document_x0020_Type" __designer:bind="{ddwrt:DataBind('u',concat('ff3',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Document_x0020_Type')}"/>
<SharePoint:FieldDescription runat="server" id="ff3description{$Pos}" FieldName="Document_x0020_Type" ControlMode="Edit"/>
</td>
</tr>
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Departments<span class="ms-formvalidation"> *</span>
</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff4{$Pos}" ControlMode="Edit" FieldName="Departments" __designer:bind="{ddwrt:DataBind('u',concat('ff4',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Departments')}"/>
<SharePoint:FieldDescription runat="server" id="ff4description{$Pos}" FieldName="Departments" ControlMode="Edit"/>
</td>
</tr>
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Hide physical URLs from search</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff5{$Pos}" ControlMode="Edit" FieldName="PublishingIsFurlPage" __designer:bind="{ddwrt:DataBind('u',concat('ff5',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@PublishingIsFurlPage')}"/>
<SharePoint:FieldDescription runat="server" id="ff5description{$Pos}" FieldName="PublishingIsFurlPage" ControlMode="Edit"/>
</td>
</tr>
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<H3 class="ms-standardheader">
<nobr>Page Content</nobr>
</H3>
</td>
<td width="400px" valign="top" class="ms-formbody">
<SharePoint:FormField runat="server" id="ff6{$Pos}" ControlMode="Edit" FieldName="PublishingPageContent" __designer:bind="{ddwrt:DataBind('u',concat('ff6',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@PublishingPageContent')}"/>
<SharePoint:FieldDescription runat="server" id="ff6description{$Pos}" FieldName="PublishingPageContent" ControlMode="Edit"/>
</td>
</tr>
<tr id="idAttachmentsRow">
<td nowrap="true" valign="top" class="ms-formlabel" width="20%">
<SharePoint:FieldLabel ControlMode="Edit" FieldName="Attachments" runat="server"/>
</td>
<td valign="top" class="ms-formbody" width="80%">
<SharePoint:FormField runat="server" id="AttachmentsField" ControlMode="Edit" FieldName="Attachments" __designer:bind="{ddwrt:DataBind('u','AttachmentsField','Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Attachments')}"/>
<script>
var elm = document.getElementById("idAttachmentsTable");
if (elm == null || elm.rows.length == 0)
document.getElementById("idAttachmentsRow").style.display='none';
</script>
</td>
</tr>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<tr>
<td colspan="99" class="ms-vb">
<span ddwrt:amkeyfield="ID" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(@ID))" ddwrt:ammode="view"></span>
</td>
</tr>
</xsl:if>
</table>
</td>
</tr>
</xsl:template>
</xsl:stylesheet> </Xsl>
<DataFields>
</DataFields>
<ParameterBindings>
<ParameterBinding Name="ListItemId" Location="QueryString(ID)" DefaultValue="0"/>
<ParameterBinding Name="weburl" Location="None" DefaultValue="http://sharepointdev:12341/sites/wiki1"/>
<ParameterBinding Name="ListID" Location="None" DefaultValue="{6A6ECE84-4D39-48E2-BD6A-C20B2AC6355B}"/>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
</ParameterBindings>
</WebPartPages:DataFormWebPart>
</ZoneTemplate></WebPartPages:WebPartZone>
</td>
</tr>
</table>
<SharePoint:UIVersionedContent UIVersion="4" runat="server">
<ContentTemplate>
</div>
</ContentTemplate>
</SharePoint:UIVersionedContent>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderAdditionalPageHead" runat="server">
<SharePoint:DelegateControl runat="server" ControlId="FormCustomRedirectControl" AllowMultipleControls="true"/>
<SharePoint:UIVersionedContent UIVersion="4" runat="server"><ContentTemplate>
<SharePoint:CssRegistration Name="forms.css" runat="server"/>
</ContentTemplate></SharePoint:UIVersionedContent>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleLeftBorder" runat="server">
<table cellpadding="0" height="100%" width="100%" cellspacing="0">
<tr><td class="ms-areaseparatorleft"><img src="/_layouts/15/images/blank.gif?rev=23" width='1' height='1' alt="" /></td></tr>
</table>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleAreaClass" runat="server">
<script type="text/javascript" id="onetidPageTitleAreaFrameScript">
if (document.getElementById("onetidPageTitleAreaFrame") != null)
document.getElementById("onetidPageTitleAreaFrame").className="ms-areaseparator";
</script>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyAreaClass" runat="server">
<SharePoint:StyleBlock runat="server">
.ms-bodyareaframe {
padding: 8px;
border: none;
</SharePoint:StyleBlock>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyLeftBorder" runat="server">
<div class='ms-areaseparatorleft'><img src="/_layouts/15/images/blank.gif?rev=23" width='8' height='100%' alt="" /></div>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleRightMargin" runat="server">
<div class='ms-areaseparatorright'><img src="/_layouts/15/images/blank.gif?rev=23" width='8' height='100%' alt="" /></div>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyRightMargin" runat="server">
<div class='ms-areaseparatorright'><img src="/_layouts/15/images/blank.gif?rev=23" width='8' height='100%' alt="" /></div>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleAreaSeparator" runat="server"/>
so from the above markup the name field is not part of the edit form,, i think this is because the Name is part of the Document content type and not part of the enterprisewiki content type .. so is there a way to add the name field to the edit
form ?.
second question, the edit form will show all the content type fields such as ; standard, document type, department , title (display in search), etc so what is the best way to remove these fields from the custom edit form ?Hello John,
This can only be done by adding VBScript to the form. It would basically be:
Sub Item_Open()
Item.GetInspector.SetCurrentFormPage "P.2"
End Sub
... where "P.2" would be what you named the page you want to display first. -
What does a new non-DE user need? | Help for a Wiki page
Hey Archers,
I'm using Arch with the Compiz Standalone Window Manager and I need some help for a project.
It turns out (who knew) that computers need a lot more to run smoothly than just a desktop and applications. You need network managers, gtk themes and much much more. Now, Desktop Environments such as GNOME and KDE provide a lot of these programs built-in, good for them, but I'm looking to build my system as dependency-free as I can and the big DE's don't really provide that. Especially GNOME just ropes me in whenever I want to use the tiniest piece of it (darn you gnome-keyring).
So I come to you fora, with a quest for information. I want to compile an overview of essential and useful applications with minimal dependencies that allow a CompizIndy user to build his system freely. And if I get enough information, I want to turn it into its own page for the Wiki so it becomes easier to get started with a birds-eye view of what you need to flesh out your system (not exclusively for CompizIndy btw). So please help me!
What applications/daemons/tools should a new system install? I'm not asking which ones are the best or worst or your favorites, just which kinds do you need --that aren't covered in the install guide--?
For example it's advisable to get:
Panel/dock
desktop manager
network manager
compositing manager
a tool for managing removable devices (ntfs-3g etc)
a packer/unpacker
a screensaver
power management
alt-F2 runcommand
custom keybindings
a user switch/logout manager
a volume manager
etc.
So what do you recommend? What do you need to get up and going?
Hoping to hear from you guys and girls,
Matthias
PS: if I'm doubling up on anything, please let me know and save me effort and embarassment ^_^
Last edited by Matsjo (2011-01-28 20:37:26)There are many threads on this, although individual ones asking for "the best app to do XXX". You could try searching those. Also Search for the LnF Awards threads. you might find a few ideas there. We also have wiki pages for light-weight applications which might be useful
Panel/dock none
desktop manager none
network manager netcfg
compositing manager none or xcompmgr (for basic compositing)
a tool for managing removable devices (ntfs-3g etc) udiskie or udev rules or devmon
a packer/unpacker coreutils eg - tar, bzip etc with an alias called "ex" in .aliases
a screensaver none
power management ???
alt-F2 runcommand gmrun
custom keybindings xbindkeys
a user switch/logout manager none
a volume manager see udiskie....
BTW, if this is for you, then simply install Arch and use a non DE based WM --- eventually you will figure out what you are missing -
We 19 rest tool for idoc processing
hi to all abap gurus
i heard that we19 is test tool for idoc proceesing and it is also also used for idoc deletion .
may i know what is idoc testing why it is required . can u pls explain n in detail ?
and so many options are there in we19 tcode like inbound function module .
and tell me how to create idoc dynamically and send to the other system by using we 19 tool
thanksssss in adavanceIntermediate Document
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data. IDoc is not a process.
- IDocs are stored in the database.
- In the SAP system, IDocs are stored in database tables.
- IDocs are independent of the sending and receiving systems.
- IDocs are independent of the direction of data exchange.
Creation of IDOCs
? Transaction code: WE 30
Defining Segment:
Creating Segment : Tcode - WE31
Creating Message Type : Tcode - we81
Assigning Message type to Idoc type: Tcode - we82
Process
The two processes for IDoc are Outbound Process and Inbound Process.
Outbound Process
When the data is sent out from the system, the process is called Outbound Process and the IDoc is known as Outbound IDoc.
Inbound Process
When the data is coming in, the process is called Inbound Process and the IDoc is known as Inbound IDoc.
Outbound Process (Sending System) Steps :
1) Goto Tcode SALE:
Click on Sending & Receiving Systems à Select Logical Systems
Here Define the Logical Systems à Click on Execute Button
Go for New Entries
1) System Name : LOG1
Description: Sending System
2) System Name : LOG2
Description: Receiving System
Press Enter & Save it will ask for Request if you want new request create new request or press continue for transferring the objects.
Assigning Client to the Logical System:
Select Assign Client to Logical Systems -à Execute
Ø 100 à Double click on this and give the following information
Client : Sending System
City : Chennai
Logical System : LOG1
Currency :
Client role :
Ø 250 à Double click on this and give the following information
Client : Receiving System
City :
Logical System : LOG2
Save this Data.
Step 2) For RFC Creation:
- Goto Tcode SM59 à Select R/3 Connects
Click on create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
Give the information for required fields:
RFC Destination : LOG2
Connection type : 3
Target Host : sappdc.wipro.com
System No : 00
Client : 210
User : Login user name
Password :
Save this & Test it and Remote Login
Step 3) Goto Tcode BD64: - Click on the change button
Click on the create model view
Short Text: model view
Technical Name: LMOD
Save this & press ok
Select just created model view
Name: "LMOD"
Goto add message type
Model Name : LMOD
Sender : LOG1
Receiver : LOG2
Message type: ZAZHARMESS
Save and press Enter.
4) Goto Tcode BD82:
Give Model View : LMOD
Partner system : LOG2
Execute this by pressing F8
It will gives you sending system port No: A00000000089 (Like)
5) Goto Tcode BD64:
Select the model view
Goto à Edit à model view à Distribute
Press ok & Press Enter.
Run your Zprogram
REPORT ZIDOC1 .
DATA: Begin of imara occurs 0,
matnr like mara-matnr,
mtart like mara-mtart,
end of imara.
DATA: wamas_con LIKE edidc,
imas_data LIKE edidd OCCURS 0 WITH HEADER LINE,
icom_con LIKE edidc OCCURS 0 WITH HEADER LINE.
PARAMETERS: e_matnr LIKE mara-matnr,
e_msgtyp LIKE edidc-mestyp,
e_rcvprn LIKE edidc-rcvprn.
retrive app. data from DB
SELECT matnr mtart FROM mara INTO TABLE imara WHERE
matnr = e_matnr.
*Master idoc control record
wamas_con-rcvprt = 'LS'.
wamas_con-rcvprn = e_rcvprn.
wamas_con-idoctp = 'ZAZHARIDOC'.
wamas_con-mestyp = e_msgtyp.
master idoc data records
LOOP AT imara.
imas_data-segnam = 'ZAZHARSEG'.
move imara to imas_data-sdata .
APPEND imas_data.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = wamas_con
TABLES
communication_idoc_control = icom_con
master_idoc_data = imas_data
COMMIT WORK.
6) Verifying Transfer of IDOCs Tcode - we05
ALE/IDOC Status Codes (outbound):
01 à IDoc Added
30 à IDoc ready for dispatch
29 à Error in ALE service Layer
12 à Dispatch ok
03 à Data passed to port ok.
Inbound Process (Receiving System) Steps:
Do the same step as you did in sending system
ü Creating IDoc
ü Defining the Segment
ü Creating Message Type
ü Assigning the Message Type
ü Defining the Logical System
ü Assigning the Logical System
ü Creating the Distribution Model
Goto Tcode - we57:
Assign function module to IDoc type
Module: Function module
Basic type:
Message type:
Direction: 2 (inbound)
Creating Inbound process code - we42
Verifying Idoc List Tcode - we05
ALE/IDOC Status Codes (Inbound):
50 à IDoc Added
51 à Application Document not posted
64 à IDoc ready to be transferred to application
62 à IDoc passed to application
53 à Application Document posted
Useful transactions for IDocs
BD87 : Status Monitor for ALE Messages
SALE : Display ALE Customizing
WE02 : Display IDoc
WE05 : IDoc Lists
WE09 : Search for IDoc in Database
WE19 : Test tool
Check this link,
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/step%2bby%2bstep%2bprocedure%2bfor%2bcreation%2bof%2bidoc -
Single sourcing tools for paper and html help
Hi
Today I started a new job where html help is made in RoboHelp
and the paper manual is made in Word. Both are translated to 5
languages, so the translators also use Word and RoboHelp.
Unfortunately there is no single sourcing at all.
I want to introduce single-sourcing so that I use the same
source for output to html help and paper.
I am used to FrameMaker for paper output and the WebWorks
Publisher plugin for the html help output.
If I were alone I might use FrameMaker and Madcap Blaze. I
think however that I can introduce one but not two new tools for
the 5 translators.
What Is your suggestion? Which tools should I use? Word
hasn't the conditional text feature I need. I don't belive that
RoboHelp can create a Word output which lives up to the Company
design standards. Besides, will Robohelp live, does it works under
Window Vista?Hi Polle2. First of all there are many users on these forums
who use RH to single source with no problems. Sure RH single
sourcing requires a little thought and set-up - just like most our
"true single source" tools. There's a new version of RH planned
(version X6) and currently in beta test but we won't know what
included in it until it's formally released.
As far as product comparisons are concerned, I've not used
Madcap Blaze and neither has anyone else as I believe it's not
released yet. My two penneth worth is you are right to go down the
single sourcing line and that RH - and other tools - could all fit
the bill. It all depends on which one fits your specific
needs. -
Overclocking tools for Linux?
morning,
i am looking for some Over/Underclocking tools for CPU / RAM / FSB etc.
Windows has billionQuadtrillion OverClocking Tools, and what is with Linux?
Can someone tell me a linuxoverclocker Site?
Can someone tell me tools for my Athlon 64 (X2) NForce4 Board or for my Laptop.
Under Windows is Notebook Hardware Controll http://www.pbus-167.com/chc.htm awsome it change CPU Voltage and can some more then 30 Minutes Battery.
thank you for any answersydney wrote:
Thanks its a begin, i hope it comes more respond.
I will try the Pentium-M Patch.
For my 6800 i am using nvclock (works fine) but thanks for the tipp.
hi, I got a nvidia 6800 go (laptop)
I don't use nvclock, I use the nvidia-settings (you can do it if you read how to tweak nvidia's drivers)
(Arch Wiki) Tweaking nvidia drivers
you got my xorg.conf here:
http://bbs.archlinux.org/viewtopic.php?id=63225 -
Are there any recovery tools for optical media?
I've had a couple of DVD's turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
[ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5758.353015] ISOFS: Interleaved files not (yet) supported.
[ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
[ 5758.353019] ISOFS: changing to secondary root
[ 5758.353035] ISOFS: Interleaved files not (yet) supported.
[ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
[ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
Does anyone have any thought or suggestions that might help?
- Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
Maybe even if I could just close the session all would not be lost?
-- Thanks in advance --
>>>> UPDATE >>>>
I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
$ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
GNU ddrescue 1.16
About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
Starting positions: infile = 0 B, outfile = 0 B
Copy block size: 128 sectors Initial skip size: 128 sectors
Sector size: 512 Bytes
Press Ctrl-C to interrupt
rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
opos: 4028 MB, time since last successful read: 10.8 m
Splitting failed blocks...
Interrupted by user
...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
# Rescue Logfile. Created by GNU ddrescue version 1.16
# Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
# current_pos current_status
0xF0213000 /
# pos size status
0x00000000 0xF0208000 +
0xF0208000 0x0000B000 -
0xF0213000 0x0000D000 /
0xF0220000 0x00000400 -
0xF0220400 0x0001FE00 /
0xF0240200 0x00000400 -
0xF0240600 0x0003FE00 /
0xF0280400 0x00000400 -
0xF0280800 0x00077600 /
0xF02F7E00 0x00000200 -
When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Last edited by wwgfd (2012-12-14 13:18:41)@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer -
Is the iCloud a backup tool for your computer? ---- Apple care suggested using iCloud for a backup to my documents. I do not have an iphone, ipad or laptop. Just an iMac. Nothing to share the data with.
Now I am unable to access some of my documents on my computer and saving documents is cumbersome because it always wants to save it in iCloud, not my computer. The documents I am unable to open are my old MS-Word. One is a macro enabled word doc. I am using os x mountain lion.
After over an hour chat with apple care, the issue is not resolved. I did not have more time to resolve the issue today and it will be continued next week. Per apple care, I do not have any documents in the iCloud however I am almost at the free capacity with contacts and documents.
My question is -- If I purchase backup from a clould provider - other than apple, back up my files in documents in their cloud (make sure I can open them) and then delete the link to iCloud. Would I preserve my data? Has anyone tried this? I am open to suggestions.
Thanks,
PhyllisIs the iCloud a backup tool for your computer? ---- Apple care suggested using iCloud for a backup to my documents.
Not really. You can store "Documents in the Cloud" but this applies only to documents created by Pages, Numbers, Preview, Keynote, and Microsoft Office documents created on your computer stored in iCloud's "iWork". Within that limited purpose, iCloud works very well.
My question is -- If I purchase backup from a clould provider - other than apple, back up my files in documents in their cloud (make sure I can open them) and then delete the link to iCloud. Would I preserve my data?
I'm not quite sure I understand what you mean by "purchase backup from a cloud provider" but if you're considering a service such as Carbonite, I don't advocate any of them. To back up your Mac, use your own backup device - Time Capsule or an external hard disk. It's inexpensive and reliable: two elements essential for a backup strategy, that no subscription service can offer. -
I am running Groovy/Grails Tool Suite™ eclipse distribution on a mac os x.
when I try to install GlassFish Tools for Luna | Eclipse Plugins, Bundles and Products - Eclipse Marketplace
it throws the following error below.
Any suggestions?
Thanks
An error occurred while collecting items to be installed
session context was:(profile=DefaultProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.application.common.services_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.application.common.services_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.doc_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.doc_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.services_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.services_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.services.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.services.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.templating_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.templating_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.upgrade_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.common.upgrade_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.envcheck_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.envcheck_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.glassfish_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.glassfish_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.glassfish_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.glassfish_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.glassfish.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.glassfish.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.javaee_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.javaee_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.javaee.doc_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.javaee.doc_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.javaee_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.javaee_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs.v11_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.jaxrs.v11_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.patches_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/features/oracle.eclipse.tools.patches_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.common.services_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.common.services_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.doc_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.doc_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.html_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.html_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.html.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.html.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.javawebapp_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.javawebapp_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf.facelet_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf.facelet_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsf.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsp_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsp_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsp.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jsp.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jstl_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jstl_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jstl.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.jstl.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.struts_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.struts_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.struts.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.struts.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.trinidad_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.trinidad_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.trinidad.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.trinidad.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.webtier.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.xml.edit.ui_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.xml.edit.ui_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.xml.model_7.2.1.201407111426.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/oracle.eclipse.tools.xml.model_7.2.1.201407111426.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.java_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.java_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java.jdt_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java.jdt_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.java.jdt_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.java.jdt_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java.jdt.ui_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.java.jdt.ui_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.modeling.xml_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.modeling.xml_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.osgi_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.osgi_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.osgi_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.osgi_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.osgi.fragment_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.osgi.fragment_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.platform_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.platform_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.ui_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.ui_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.ui_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.ui_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.ui.swt.xml.editor_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.ui.swt.xml.editor_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.ui.swt.xml.editor_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/features/org.eclipse.sapphire.ui.swt.xml.editor_0.7.4.201406171836.jar
Artifact not found: http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.workspace.ui_0.7.4.201406171836.jar.
http://download.oracle.com/otn_software/oepe/luna/plugins/org.eclipse.sapphire.workspace.ui_0.7.4.201406171836.jarCould you see if you can access the following two URLs on your system? The expected behavior is 404/not-found, but you are somehow trying to install based on metadata from the previous release, which was found in these two files.
http://download.oracle.com/otn_software/oepe/luna/content.jar
http://download.oracle.com/otn_software/oepe/luna/artifacts.jar -
Can not use all the tools in my drawing markups any ideas on getting them to work?
Can not use all the tools in my drawing markups any ideas on getting them to work?
Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha -
Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013 06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU 06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013 06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013 06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013 06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013 06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013 06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker 06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2 4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013 5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor 1.0
Information about my package
CodeRush for Visual Studio 13.2
Common Azure Tools 1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg 1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage 1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage 1.0
DevExpress VSIX Package
DevExtreme.Design 13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio 13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer 1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools 12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools 1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0 1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package 1.0
XtraReports package -
Microsoft Office Developer Tools for Visual Studio 2013 on Windows 10 Technical Preview
Hi, I've never developed a plugin for Office before. I've downloaded the technical preview of Windows 10 and have it running via Boot Camp on my MacBook (Looks good! I'll buy it when it comes out). Obviously with this being in beta it's understandable that
there are problems, so this is just a heads up on one particular problem. Maybe there's already a solution or workaround?
I've downloaded Visual Studio 2013 Community Edition, brought a copy of Microsoft Office Home And Student 2013 and am currently in the process of installing Microsoft Office Developer Tools for Visual Studio 2013.
The only problem though is that when I try to install it I get the following message:
http://s22.postimg.org/dxh1gtra9/Install_Problem_Office_Plugin_Tools.png
Here is the log:
http://pastebin.com/7wWkSfjF
I also tried to download the file directly and run that.
http://s3.postimg.org/tj9vb660j/Install_Problem_Office_Plugin_Tools2.png
I right clicked on the file and noticed an options called "Troubleshoot Compatibility". There was a wizard, and I ran through the wizard a number of times through different routes but none of them worked. I was unable to find the option which turned
off compatibility mode. I then searched for answers online which told me to do some things in the regedit program but that didn't seem to solve the problem.
Anyway, I understand that this is a beta version of Windows 10 and that there are going to be problems but thought it would be best to let you know. Perhaps I should just bite the bullet and buy Windows 8.
Many thanks,
LawrenceHi RealByReel,
Thanks for sharing the solution back.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Best Usage reporting tool for SharePoint 2013 (onpremises)
Please suggest me best reporting tool for SharePoint 2013 on premises.
Need to get site usage summary for any time in last one year.
Need to get library/list usage summary for any time in last one year. etc.
How many peak hits and unique no of users across all levels.
Thanks, Ram ChHi Ram
We have two links “Popularity Trends” and “Popularity and Search Reports” in the site settings. By Clicking on the two links we can view the usage reports in SharePoint 2013.
More references:
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
http://sureshpydi.blogspot.com/2013/06/usage-reports-and-popularity-trends-in.html
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.prweb.com/releases/2012/8/prweb9821144.htm
Amit Kotha
Maybe you are looking for
-
Is there something wrong with my directory server replica?
Yesterday I spun up a replica of my OD Master which I had just rebuilt clean from scratch. Everything SEEMS fine, but the GUI reports a status I did not expect: As you can see, the master has its own IP listed twice, and there are 3 IP's for the rep
-
Once I've chosen restore, nothing happens
I had some problems with a kernel panic and after some other issues I decide to back up and reinstall. I created disk image on put in on an external HD. BY THE WAY: I have two partitions, one for Windows 7 and one for Snow Leopard. The kernel panic p
-
How to run exe files using peoplecode?
How to run .exe extension files using peoplecode. It should execute on clicking a button.can anyone provide sample peoplecode for the same. where do i place the exe files ? Local workstation or Server or FTP? can i use the same peoplecode if i'm usin
-
Fortran Compiler Bug? USE statement renaming
The Fortran compiler f90: Sun Fortran 95 8.2 Patch 121020-05 2006/12/08 complain, incorrectly I believe, about a renaming in a USE statement. Here is the source code: MODULE mod INTEGER :: m CONTAINS SUBROUTINE sub_mod(m1,x) INTEGER, INTENT(in) :: m1
-
Hello, We have 10gR2 installed on Red Hat Enterprise Linux ES release 4 (Nahant Update 4). The installed Java version on the database-server is 1.4.2.0 and coming from Red Hat (GCC Java). To install Tivoli Storage manager for Oracle, Java version 1.4