Tools of Integration Directory

hi
i would just like to know
whether if we use any tools like schema builder or proxy generator or configurator assistant in integration directory
regards
neha

> i would just like to know
> whether if we use any tools like schema builder or proxy generator or configurator assistant in integration directory
In Intergartion Directory we use wizard to create the bussiness scenario, there is no such tool to create the schema or proxy.
Proxies are generated in ABAP Side (R/3) by using the tcode SPROXY.

Similar Messages

Generating WSDL using Integration Directory (Tools-Define Web Service)

Hi,
I have tested the "Define Web Service" tool in Integration Directory - some question;
1) It's a little bit frustrating to change the URL after clicking the "Propose URL" button - is it possible to configure somewhere the right URL
http://<srv>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<cchannel>
2) The generated WSDL is not according to the basic profile for WSDLs - wrong encoding="ISO-8859-1" - supposed to be "UTF-8"|"UTF-16" - is it possible to configure how the WSDL is generated?
I'm not sure, but I think there is a issue related to the type of binding for a binding.
3) A web service can consists of several methods - is there a tool for generating a WSDL for several interfaces?
It's "boring" to manually copy-paste from several generated WSDLs to one main WSDL for a web service
Anyway, by using XMLSpy and SoapScope, everything works just fine

a single data type will refer to multiple data types data.
You can refer one Data type in other Data Type but it wont be available under a different root node.....the root node will the the DT name under which you are referring the other DTs......you can do this by:
DT --> Give the appropriate name to a node --> While selecting the Type for this node select Data types --> select the DT from the list available....for this you should first include all the schemas in IR i.e. you should first create individual DTs by importing the schema (DT --> XSD --> Import Data Type Definition from File)
You have a huge list of schemas!
Regards,
Abhishek.

Refresh System Data in Integration Directory PI 7.11

Hey,
I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
anymore.
Can anybody help?
Thanks!
Michael

I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

No service for system SAPNID, client 800 in Integration Directory

Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
 Created Data Type
 Import IDOC ORDERS.ORDERS04
 Created Message Interface
 Created Message Type
 In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
 Created the Scenario (name : FILE_FROM_IDOC)
 Assign Business Systems as R3XID
 Create communication channel(name: FILE_ORDERS_COM_CHNL)
 Create Receiver Determination
 Interface Determination
 Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
Sunil

Hi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
Technical Systems.Detail
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
Business Systems Detail
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: 100 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
SAPNID Business Systems Detail
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: 800 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case.

Integration directory problem while creating business service

HI,
CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
BEST REGARDS,
MONA

Hi Mona,
Let me explain you in detail:-
First, Activate the Change List in the Integration Repository once the design objects are complete. By activating the change list, the object becomes available for Configuration in the Integration Directory.
Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
You also have the option of 'Configuration Wizard'.
This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
It is not mandatory to use any of these tools to configure your scenario.
All you have to do for configuring your scenario is
1. Create Business system/Business service
2. Create Communication Channel
3. Create Receiver Determination
4. Create Interface Determination
5. Sender Agreement
6. Receiver Agreement
I hope this provides you a solution.
Regards.
Praveen

Adapter engine empty in Integration Directory

Hi
when I try to create a Business System in Integration Directory and I am configuring the communication channel
(for example File Adapter or RFC )
the field "Adapter Engine" is empty and has no selection to choose from.
Is there a problem in configuration or else? I have no idea.
Any help is appreciated and points will be rewarded

HI,
I think the problem is your Adapter metadata is not imported.
Import the SAP BASIS Software Component into the Integration Repository.
For more-
Copy XI3_0_SAP_BASIS_<version> (6.40,7).tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
After that go to Integration Repository->Tools->import Design Objects and then import it.
Regards,
Moorthy

Integration Directory | Choose Adapter Metadata - No objects found!

Hi friends.
I'm new in XI and I wanted to test some simple scenarios. At the beginning I had a problem with the SLD. We made some post-installation steps and everything was allright. Thus my problem is now: In the Integration Directory I try to create a communication channel - I choose Scenario->Service Without Party -> Business System -> <myBusinessSystem> -> Communication Channel and do a right click on it. I choose NEW and create a new communication channel. But when I use display input help for Adapter Type, it is loading for a while but the list of Adapter engines is empty and there is written - No objects found!. I didn't install XI on our machines and I don't know which installation / post installation steps were done. Adapter Engine in integration server is installed for sure. I looked for some threads on the forum, but I didn't find nothing more specific for my problem. Probably I need to set up something somewhere to obtain a list of adapters for the communication channel. Any help will be rewarded.
Thanks
Ondrej

Ondrej,
You need to import SAP BASIS Software Component Version into Integration Repository.
You need to download it from service market place.
https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
In Search Term Enter "SAP BASIS <version>".
Then put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
Now in IR, TOOLS ---> Import design objects and import it.
After import you should be able to see the namespace under it.
Regards,
Sarvesh

NO Interface Mapping found in the Integration Directory (Configuration)

Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
Michael

Hi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory.

How to import Adapter's in Integration directory

Hi,
How to import Adapter's in Integration Directory which we can use in communication channel.
Thanks
Hari

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Integration Directory (ID) transport to Prod system

I am trying to move XI ID and IR to prod system thru file system transport. When I transport ID requests and activate it keeps complaining "Unable to move object. Change lists were not part of the same import"
I checked the ID there are no open requests in my id or others all have been closed.
I would also like to know if there is a way to completely transport the Integration Directory (ID) objects either scenario or service objects along with their change lists
Thanks
Subbu

hi,
Change lists were not part of the same import"
Make sure you have activated change lists open under ur id and check if any for other userid
 would also like to know if there is a way to completely transport the Integration Directory (ID) objects either scenario or service objects along with their change lists
Once you have activated the changelists you can either transport the whole scenario(right click on scenario and export) or transport individual objects using the tools-> export option on the tool bar of ID.
Cheers,
naveen

Value Mapping - Mass replication and Integration Directory interface

Hello all,
The following question is often approched in this forum but answer is never cleary provided. Thus I'm sorry to ask it again.
We are using Value Mapping mass data replication using special interface provided by XI. We can easily see results in cache using Cache Monitoring tool in RWB.
My question is :
Is it possible to see and then to maintain such data (mass replicated) using Integration directory (Tools > Value Mapping menu)
In this menu, we don't see our loaded data.
How to do this ?
Thanks a lot.

Hi Jean-Charles !
We also use VMR, and we find no way to access the cache data from Integration Directory. I think that by design this is not possible.
Value Mapping Replication for Mass Data
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
You cannot display the replicated value mapping data in the Integration Directory user interface (see Displaying/Editing the Value Mapping Table) since the original runtime data is stored in the application from which the data is copied. The value mappings created in this way using the user interface of the Integration Directory are just one of many possible sources of data.
Regards,
Matias.
ps: please award points if helpful

How to retrieve configuration scenarios in Integration Directory?

Hi All,
I am developing a Java program to read all configuration scenarios in Integration Directory. My plan is to find SAP's Java APIs available in the NetWeaver Java stack to read the info I need. I have done lots of searches for such the APIs but still got no luck. Could you help me out?
I'm on NetWeaver PI 7.1.
Thanks,
Viet
Edited by: Viet Phan on May 13, 2011 1:11 PM

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Can u breif me the meaining of interface in Integration Directory of XI

interface of Integration Directory and Java are same as i am new to XI and familiar with java, it would be helopful if i found the difference between interface between java interface and XI interface
Thanks & Regards,
Pushparaju.B.

Hi Pushpa raj,
It is very nice to see you here, Let me share my kowledge and it might help you to understand better.
1)wthat is meant by XI?
A) XI is nothing but Exchange Infrastructure.
2)What does it do?
A)It is middle ware tool like webmethods and tibco,XI is a middle tool ware tool provided by SAP.
   XI will gives an advantage to exchange the data between two systems.The System might be A2A or B2B.A2A is nothing but Application to Application and B2B is nothing but Business to Business.
EX:System A--XI--
>System B.
                        data                  data
See the abvoe example I have two system both these system might be sap to sap or sap to non sap applications.
I have a situation where want to send data from System A to System B..I need one middle ware tool such way that it will accept the system A data and undestand the data and it could get transfer to System B.
    Sucha situation we need middle ware tool like xi and for sending the system A data to System B though XI we need one interface where it can have both sender data and receiver data.
How a Interface looks,
System A contines two fileds and I want to send these data to System B
System A                                                       System B
First Name-Rama Rao                               FullName:--Rama RaoTatineni.
LastName----Tatineni
So the above information can be hold one interface and it will transfered to System B.
Hope you understand better...still if you have any question please feel free to ask so that I can help you out by clarifiying your doubts.
Note:Interface whichin java and interface which in XI is both are different.
Thanks in Advance.
Chandu.

Tools of Integration Directory

Similar Messages

Maybe you are looking for