Tooltip doesnt show up when the component not focussed
We use Jtable and when you mouseover each row it we generate tooltip. When we have a different application focussed and when we mouse over the rows without selecting or focussing, the tooltip doesnt show up.
any ideas how this can be resolved?
srinivasanbe wrote:
any alternate options to perform this?re-write your operating system?
Similar Messages
-
The menu doesnt show up when the DVD is played...
i create a menu and the movie is added in a button. but when the dvd is inserted, the menu does not show up. it goes straight to the video, and when i press the menu button the remote, it says it is not permitted. what do i do?
so you mean i have to go to the map and then insert my movie? what i did was after i created the menu, i went to the plus sign on the bottom left corner, pressed add movie, then the button came up and i draged my movie to that button. is that not right?
-
Okey so basically I've themes my windows 7 into a black state.
The thing about that is that the default font color firefox uses for tooltips and other information is back so its quite impossible for me to read.
After a while googleing I found out that something called userChrome.css can be used so naturally I looked furhter.
I found answers for almost everything I was looking for, except these "button tooltips".
Heres my userChrome.css code:
menubar, menu {
color: black !important;
menupopup > menu,
menupopup > menuitem,
popup > menu,
popup > menuitem {
color: white !important;
tooltip, statusbar {
color: white !important;
Basically it takes care of all text that was black and turns it the way I like it.
So what is the name of the tooltips that shows up when you hover over a UIbutton? such as "back"
With the correct name I should be able to add
name {
color: white !important
and it should work just fine :)hey 88_King,
go to http://support.lenovo.com and download any one or all the software you require from here.
and most of the items you need is under ThinkVantage
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Tool bar gifs are not showing up when the application left idle for long.
Hi,
I have a Java application built with jdk sdk 1.4. This application was earlier on jdk 1.3 and very recently we moved to 1.4.
The problem here is, tool bar gifs don't show up when the application is left idle for long or kept minimized for long. After I minimize and maximize, they show up. Also sometimes few are seen and few are not, and again as I said minimize and maximize, the rest(which were not showing up earlier) turn and therest don't.
What could be the reason. This was not the case in jdk 1.3.
Any help wil be highly appriciated.
ThanxI have the same issue with 1.4.
-
TS3276 When I receive an email it doesnt show "1" on the dock icon of mail.
I have 2 accounts online on my mail app, one pop and an imap.
When I receive a mail through pop, it doesnt show "1" on the dock icon of mail. Through imap everything works fine.Why now is showing me this amount of emails as unread?? I have already marked them as read..
-
Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7
Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
www.apple.com/feedback -
My user account doesnt show up when turned on, just a gray screen on my Mac mini.
My user account doesnt show up when turned on, just a gray screen on my Mac mini. Please help. I have lots of unsaved data on it.
Gello, see if this works...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk. -
My aperture 3.0 doesnt show up in the software update
How can i force my A3 to update - it wont let me download it because it says i need A3 installed --(and it definately IS) and it doesnt show up when using software update either.
What file is missing to get this to do it and how do i fix it?
- i tried deleting A3 from applications and using my install disk to reinstall it - didnt workPerhaps you renamed Aperture to something like "Aperture 3" (some people did this when keeping Aperture 2 on the system concurrently). Make sure it's just named "Aperture" and it is in the base level of your Applications folder.
You can Download the update here.
http://support.apple.com/kb/DL1006
Just be sure to quit Aperture and back everything up before updating. Hope this helps.
Rob -
my time machine doesnt show up in the finder and ive done the checkboxes in the finder preferences and ive restarted in safeboot. i still cant figure out why it wont show up
iOS: Device not recognized in iTunes for Windows
-
When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?
To what format file are you saving from Audacity? Although technically AIFF format can save data tags within the file itself I have not found this to always work with all applications. Likely the information you enter into Audacity is just being saved in the file name. When you add this file to iTunes, if iTunes cannot find tags it recognizes it will simply add the track with the file name as the track name. You need to add the tracks to iTunes, then enter the information using File > Get Info for a track or series of tracks,
Some of the above information may vary slightly depending upon the file format being used.
It helps when asking questions here to provide as much information at the onset as possible. We didn't know until this stage that all these menus were in fact part of Audacity and not iTunes. -
When i plug in my ipod it doesnt show up when i go into "my computer"
When i plug in my ipod, it doesnt show up when i go to my computer ? What will make it show up ?
Start here:
iPod not recognized in 'My Computer' and in iTunes for Windows -
Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.
You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app. -
So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back? Please Help
Redownload them from the iTunes Store. It's free.
(58292) -
I have an iphone 5 and I did the upgrade. Now all of the music videos that I purchased on itunes do not show up when I hold the phone horizontally. It is just a picture of album covers. Any thoughts?
thank yousomeone swapped upgrades. Phone could have been sold For quick cash.
-
Discoverer Plus 10gR2 not show data when the script of view have package
Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick
Maybe you are looking for
-
Hi, My requirement is adding fields to an existing structure in LSMW batch input method and performing validations on those fields as follows 1. Alternative Priority should be numeric 2. Alternative Starategy
-
How can I use java to handle the Schema
Hello,everyone. These days,I'm researching how to use schema in java. For example,get the restrictions of one element and validate it in the xml. My question is: Is there any api to do this in java.Any java middleware will be ok.Please give the url t
-
Removing text frames from rdf export format
After a report has been exported in rdf format, can anyone tell me if there is a way to remove the text frames from the document, so that the formating is retained but by using word's tabs etc. Our client needs to manually add sections to the documen
-
I need to open a custom report instead of using the "Analyze..." link of the report I put in my portal page. I create a hidden link like this: http://<server>:7780/discoverer/viewer?userName=<name>&password=<pwd>&databaseIdentifier=<connStr>&connecti
-
Missing "Step Result Property" when configure multiple numeric limit database statement
In the NI article "Creating a TestStand Database Schema from Scratch" (http://www.ni.com/white-paper/6484/en/), it mentioned option "Apply To: Step Result Property" for statement "MEAS_NUMERIC_LIMIT". But I could not find "Step Result Property" in Te