Tooltip Trigger for Lightbox Display

Is it possible to have a tooltip as a lightbox trigger?
In other words, you hover over the trigger and a tooltip pops up, click the trigger and a lightbox display appears.
My goal is to have an image of a hand pointing at the trigger when you roll over it, and disappear when you move your mouse off. Click the trigger and a lightbox display appears with more information.

how do i change it so that when the page loads that text frame loads normal state? i can't seem to get this particular txt frame to do that. all the others do it. i've deleted it, copied another, made it from scratch- this last one always seems to load in active state
also, after coming out of the lightbox- is it possible to make the txt frame return to normal state?

Similar Messages

Additional Trigger for Lightbox Composition

Hi guys,
I would like to add a second trigger (button/text) to a lightbox composition in Muse. This however is not a available feature in Muse (you cannot duplicate or add a trigger). So I was thinking about accomplishing this by embedding a script with .mucow or editing the lightbox script, but I couldn't find the code which displays the lightbox. Do you have any solution, or any idea where I should be start looking? Thanks alot!

You could create a blank composition widget, using the that trigger, then inert the Lightbox widget inside composition widgets box. (widget inside widgets work).

Final trigger for lightbox seems to load in active state

i am a total noob
i designed a site with a lightbox and 5 triggers.
i made the triggers blank boxes and overlayed them on a grid of 5 photos.
i also added txt to each trigger to define its rollover state- normal is no fill/ rollover and pushed is filled/ active is no fill.
for some reason, the final trigger does not do the roll over action for the text box. i think it is because it loads into the active state but i can not be sure.
i noticed that once the corresponding triggers are activated, the text boxes do not resume they're roll over behavior- they remain in the active state.
this is the site www.joepennella.com
the trigger i'm taling about is on the bottom right- for "commencement"
any guidance would be greatly appreciated
max

how do i change it so that when the page loads that text frame loads normal state? i can't seem to get this particular txt frame to do that. all the others do it. i've deleted it, copied another, made it from scratch- this last one always seems to load in active state
also, after coming out of the lightbox- is it possible to make the txt frame return to normal state?

Text frame rollover states in lightbox display comp widget trigger area no longer working in V 3.0

Hi
I had text frames with rollover states placed into the trigger area of lightbox display composition widgets
The rollover on the text worked fine, and then when clicked the lightbox composition widget opened
However this morning I updated Muse to the latest version 3.0 (which I was prompted to do) But now all these text frame rollover states no placed into the trigger areas of my lightbox dispslay composition widgets no longer work throughout my entire document
The lightbox will open when I click the text, but the rollover effect will no longer work
Is anyone having the same problem? Is there a way I can fix this? I was supposed to send the site to a client this morning :\
Thanks

Yes. I'm having the same type of trouble with a site I'm updating for a client. I haven't updated the site since before version 2.0.
But now that I've upgraded to version 3.0 my rollovers and linking for the rollovers don't work. Very strange. I too need to get
the site posted ASAP. Please someone help us on this subject.
thanks

How to hide image displays for lightbox

Using DW, I have a lightbox display. Here is the page:
Example page
As you'll see, if you click on the photo, it opens up into a lightbox. My colleague wants to have 10 photos open up in the lightbox but they do not want all of those photos to have thumbnails on the page. In other words, they want one single photo, you click on it, and then see all 10 photos in the lightbox.
If I put all of the img code for all 10 images on the page then all 10 images will also show up on the page. So I have to somehow "hide" the images so that the small version of the photos do not show up on the page but will show up in the lightbox.
Sorry if this sounds confusing and hope someone can help. Thanks.

Deaf Mike wrote:
I've never seen it either as it already existed on the site and I actually just discovered it.
Here's another example
When you arrive at the above, click on the turtle and you'll see how several photos are in the lightbox. Then close the light box and scroll down and click on those + symbols. See those other images in the other sections? Somehow the code is pulling those photos into the lightbox too.
I want to do the same thing but the key is there will be no + symbols on the page - just one turtle photo and when you click on the turtle, all of the other photos appear in the light box. Another thing I'm thinking about doing is having one turtle photo and then 10 1 pixel by 1 pixel invisible image down at the bottom of the page then have 10 of them and then the h ref for each are the larger photos - that way when you click on the turtle, the code will pull in the 1X1's large photos into the light box.
Well that would be pretty easy just do as 'Per' suggested in the previous post and hide the 'thumbnails' you don't want on the page:
Create a rule in your css - something like:
.hide_thumbs {display:none;}
So typically a set of light box images might look like the code below. (when clicked they open in a lightbox and that lightbox usually has an option to display the other images in that particular gallery by clicking through them, rather than clicking on them individually).
<a href="turtle.jpg"><img src="turtleThumb.jpg" alt="turtle"></a>
<a href="whale.jpg"><img src="whaleThumb.jpg" alt="whale"></a>
<a href="dolphin.jpg"><img src="dolphinThumb.jpg" alt="Dolphin"></a>
<a href="tuna.jpg"><img src="tunnaThumb.jpg" alt="Tunna"></a>
If you add a class="hide_thumbs" the ones you don't want to show get the display: none; property BUT they should still be available in the lightbox to click through.
<a href="turtle.jpg"><img src="turtleThumb.jpg" alt="turtle"></a>
<a href="whale.jpg" class="hide_thumbs"><img src="whaleThumb.jpg" alt="Whale"></a>
<a href="dolphin.jpg" class="hide_thumbs"><img src="dolphinThumb.jpg" alt="Dolphin"></a>
<a href="tuna.jpg" class="hide_thumbs"><img src="tunnaThumb.jpg" alt="Tuna"></a>

Why can't I reduce the height of my container box in the Lightbox Display composition widget?

I'm using the Lightbox Display composition widget, I would like to place my trigger at the bottom of my lightbox, I've reduced the height of my image frame but the container box cannot be reduced accordingly. I need to reduce the height of the container box or my triggers will be hidden behind the box. Please advice, thank you.

Hi,
When you insert the light box display, by default it has 3 slides with different components like trigger, container, target, image frame, text box, next button, preview button. You have to change the dimensions for all components for these default 3 images one by one.
Or you can delete 2 of the triggers (that will resul in deleting all of their components from the widget), then you are left with only one image and its components. Later, you can add more images to lightbox display.
Resize the components as per following video:
http://gauravr183.businesscatalyst.com/images/2013-09-26_1440.swf
The steps are, after you have added the widget on the page:
Delete the triggers.
Then select Image frame, resize it. Move close button near it (the 'X' button), resize the text box,resize next and previous buttons and move all of these near the image frame.
Then click on the image frame, till you get "Target" area selected, resize target area and container will be resized automatically.
Regards,
Gaurav Aggarwal

Update - Lightbox Display Centering Issue

Upon updating my Adobe Muse software, it appears its created an issue that effects my lightbox display composition widgets. They don't seems to be centered in the webpage anylonger? Help?

Hi Mark,
Unfortunately you hit a bug that causes the lightbox to be off center. This happens if the Target inside the Container for each Composition widget has different strokes for different states.
Until we release a fix for the bug, please make sure you use the same stroke for all the states of a Target, or do not use a stroke at all for that Target. In your case, the Normal/Rollover/Mouse Down states all have a red stroke, while the Active state has no stroke. You can easily select each Target using Layers panel, and then from the states panel select the Active state and use the delete button from the lower-right corner to clear that state's customizations, including stroke.
Sorry about the inconvenience. Let us know if workaround fixes the issue for you.

Full width caption boxes for lightboxes

Hello everyone - I am loving the new "Full width" button for lightboxes and images, BUT I can't seem to get the captions box to go full width, this means when i use a lovely opaque box over an image, it isnt going full width but the image is. Please see image example. Please help?????
Thank you in advance
forumnotifier Help with using Adobe Muse CC

Hi Jim
I just thought of something you may want to check. First,
press the Windows key (if you have a keyboard equipped with one of
these) and the letter D. The goal is to display the desktop. Then
right click and select Properties. Click the settings tab, followed
by the Advanced button and finally the General tab. Compare the
setting here between working and non-working PCs.
Hopefully this will help some... Rick

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Why no SCALE option for lightbox images?

Need SCALE options for lightbox images!
Must have SCALE DOWN option.
Images must scale down to display correctly on a smaller screen.
Currently Muse Lightbox FAILS on smaller browser screens.
Adobe please include this feature ASAP!

Thanks for the reply
The problem with the Fullscreen Lightbox is that the images scale up and pixelate on a larger browser viewport.
(To avoid this requires a very large image that makes loading slow)
So for Fullscreen Lightbox I would like a SCALE DOWN ONLY option (requested previously). Then the images would not scale up above 100% and would float centred on larger browser viewports (FIT PROPORTIONALLY option used).
And for the standard lightbox a scale option, as requested above, would mean the image doesn't overflow on a smaller browser viewport.
The reason for asking for scale options is to keep images looking their best at 100%, and downscaling for smaller browser ports.

Different screensaver for each display?

I'm pretty sure OS X out of the box doesn't do this, but has anyone found a way to designate a different screensaver for each display, or more specifically, only have the screensaver happen on one display, while the second display goes to sleep?
Thanks!

Hi Nari,
I guess that's not possible. From Web Dynpro side, dropdown is only one UI element. So different tooltip cannot be assigned.
However, You can find the which dropdown item is selected and assign the tooltip at runtime accordingly.
In wdDoModifyView method, you can assign the tooltip text.
if(!firstTime){
IWDDropDownByIndex drp = (IWDDropDownByIndex)view.getElement("DropDownByIndex");
drp.setTooltip(wdContext.currentNODEelement().getATTRIBUTE());
Regards,
Anand G

Delimiter for multiple display fields

Hi ,
Is there any way in MDM so we can change the delimiter for multiple display fields.
Suppose for a lookup table code and description both are display fields.In Data manager when we select main table as our current table ,value in that lookup field will appear as code,description ,but as per the requirement it should be hyphen separated i.e code- description.
Is there any way we can change the delimiter.
Thanks in Advance
Regards,
Neethu Joy

Hi Neethu,
No, there is no way to change the delimiter but I can suggest you some workaround.
Create one more field in same lookup table and mark it as display field. Create one assignment with the expression code&"-"&Description and put it in workflow having trigger action = Record Create and Record Update with Automatic launch action. With this, whenever you modify lookup data i.e. either code or description workflow will automatically update the third filed.
Just check if this fits in your requirement.
Regards,
Jitesh Talreja

Help with configuring lightbox displays

Can anyone point me to some detailed explanation of how to configure a lightbox (nested in a slide show) - when I preview in browser the images are not central, and the black doesn't cover the whole page when viewed on an iPad.
I'm pretty sure this is not a bug, just inexperience on my part, and I'd love to see a breakdown of best settings for all the elements in a lightbox.
For instance, the black background square - I've dragged that to fill the page width and height, but is this necessary? I've tried various iterations of size and placement of this in design view, but can't quite how (or even if) that effects the way the lightbox displays in browser
And I'm aligning the images in the lightbox sideshow with the centre of the page in design view, but they don't seem central when the sideshow is previewed in browser.
Whilst there are a few tutorials that cover creating light boxes, I've not seen anything that explains the configuration in detail. In essence I feel like I'm looking for a user guide, the kind of thing that used to come with boxed copies of Adobe and Macromedia software, so I can teach myself from the ground up; does any such thing exist online?
Thanks in advance for any suggestions.

Hi Parikshit,
apologies, I got my description the wrong way round (can't see a way to edit my original post). I'm talking about a slideshow nested in a lightbox - just like the post you pointed me to. I had seen that post, but it doesn't answer my query really.
What I'd like to be able to do is in design mode, whilst editing the slideshow, have some sense of how these images are going to appear when I see them in a browser, without having to flip back and forth between design and preview modes.
For instance if I want to have the image centred within the browser window - do I need to centre the hero image within the slideshow container? The slideshow widget within the lightbox container? Or should I use the guide rectangle (don't know what it's called, or even what it is!) that appears on the page when I have guides switched on, as a guide to placement of slideshow images. I'm sure it's basic stuff, I just wondered if there was a user guide that I could reference when I want to figure out how to do a particular thing,
cheers
Arno

A Problem with the Lightbox Display since the update.

I use the lightbox display widget within the featured news widget. Since the update when I add the lightbox to an image it appears on all the featured news tabs when it should only be on the tab I place it in. This didn't happen before the update. Any ideas why this would be or how I can correct it. Strangely, the images with a lightbox made before the update are fine.

I'm unable to reproduce the problem. Can you try re-inserting the Featured News Composition widget on a page and after removing the Text frame (optional step) from the Target of the first tab, insert the Composition: Lightbox Display into the Target of the first tab. Then try switching between the tabs in Design mode and see if the problem persists at your end, also try a preview in browser. The Lightbox Display should appear only for the first tab and other Targets should remain untouched.
Thanks,
Vinayak

Using a OAM to Trigger a Lightbox in Muse

Hello,
I am wondering if you can use a OAM to trigger a lightbox in Muse, or a clever work around to do it. Tried placing one inside a trigger, but the link becomes unclickable.
I have been searching and reading for an answer, and have not found a solution. I'm just assuming this can't be done right now, but it was worth a shot.
Thanks!

Hi,
Was this ever solved? I am also having the same problem.

Tooltip Trigger for Lightbox Display

Similar Messages

Maybe you are looking for