Toonz help.........error 4000 can't burn cds

I have tried everything! Installed itunes 6.0.3, upgraded firmware, windows update...still can't burn cds. Do I need to buy a new burner? Toonz help
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.1.0.95),
UpperFilters: Cdralw2k (7.1.0.95), pwd_2k (7.1.0.95), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
Found aspi32 running.
SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
Current user is administrator.
D: _NEC DVD_RW ND-2500A, Rev 1.0A
Audio CD in drive.
Found 14 songs on CD, playing time 56:46 on CDROM-XA media.
Track 1, start time 00:02:00
Track 2, start time 05:08:25
Track 3, start time 08:07:62
Track 4, start time 12:02:17
Track 5, start time 17:01:02
Track 6, start time 21:57:00
Track 7, start time 25:53:25
Track 8, start time 30:25:50
Track 9, start time 33:31:17
Track 10, start time 37:14:72
Track 11, start time 40:17:65
Track 12, start time 43:05:67
Track 13, start time 47:14:72
Track 14, start time 51:44:07
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
E: SAMSUNG CD-ROM SC-148A, Rev B402
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.

I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

Similar Messages

  • Error 4251-can't burn cds, can you help?

    Here are my diagnostics-please help this is very frustrating!!
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 7.4.3.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), MxlW2k (1.1.0.116),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82865G Graphics Controller
    Connected Device Information:
    Disk drive, ST340014A, Bus Type ATA, Bus Address [0,0]
    CD-ROM Drive, SAMSUNG CD-R/RW SW-252S, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, SAMSUNG DVD-ROM SD-616E, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: SAMSUNG CD-R/RW SW-252S, Rev R902
    Audio CD in drive.
    Found 16 songs on CD, playing time 58:40 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:52:37
    Track 3, start time 07:37:30
    Track 4, start time 11:32:55
    Track 5, start time 14:42:35
    Track 6, start time 19:20:63
    Track 7, start time 22:56:61
    Track 8, start time 26:52:62
    Track 9, start time 30:09:06
    Track 10, start time 35:04:12
    Track 11, start time 38:19:18
    Track 12, start time 41:30:43
    Track 13, start time 44:37:41
    Track 14, start time 47:43:71
    Track 15, start time 50:56:07
    Track 16, start time 54:30:24
    Audio CD reading succeeded (check for old firmware).
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SAMSUNG CD-R/RW SW-252S on CDR media at speed 4X.

    I am getting sam error. If you get an answer please let me know. I can burn from musicmatch but not itunes!

  • TOONZ HELP error 4000 is back

    Posted: Mar 11, 2006 9:40 PM Reply Email
    I had the unknown error 4000 before...fixed it..now its back here is my cd diags
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    NVIDIA AWRDACPI
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX Integrated GPU\GeForce4 MX Integrated GPU
    Found aspi32 running.
    SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
    USBSTOR\DiskWD_____1600JD_External101a, Bus Type USB
    SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type SCSI, Bus Address [1,0]
    SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type SCSI, Bus Address [0,0]
    Current user is administrator.
    D: _NEC DVD_RW ND-2500A, Rev 1.0A
    Audio CD in drive.
    Found 16 songs on CD, playing time 44:33 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 02:50:71
    Track 3, start time 05:40:53
    Track 4, start time 09:42:58
    Track 5, start time 12:36:34
    Track 6, start time 15:41:08
    Track 7, start time 18:19:35
    Track 8, start time 21:08:31
    Track 9, start time 23:08:14
    Track 10, start time 26:26:39
    Track 11, start time 29:28:56
    Track 12, start time 33:04:62
    Track 13, start time 36:49:06
    Track 14, start time 39:31:60
    Track 15, start time 42:10:31
    Track 16, start time 42:52:14
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4 8 16 20.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG CD-ROM SC-148A, Rev B402
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive D: _NEC DVD_RW ND-2500A on CDR media at speed 4X.
    toonz i really need your help now!!!

    Posted: Mar 11, 2006 9:40 PM Reply Email
    I had the unknown error 4000 before...fixed it..now
    its back here is my cd diags
    Microsoft Windows XP Home Edition Service Pack 2
    (Build 2600)
    NVIDIA AWRDACPI
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX Integrated
    GPU\GeForce4 MX Integrated GPU
    Found aspi32 running.
    SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI,
    Bus Address [0,0]
    USBSTOR\DiskWD_____1600JD_External101a, Bus Type
    USB
    SCSI\CdRomSAMSUNGCD-ROM_SC-148A_B402, Bus Type
    SCSI, Bus Address [1,0]
    SCSI\CdRomNEC____DVD_RW_ND-2500A1.0A, Bus Type
    SCSI, Bus Address [0,0]
    Current user is administrator.
    D: _NEC DVD_RW ND-2500A, Rev 1.0A
    Audio CD in drive.
    Found 16 songs on CD, playing time 44:33 on Audio
    CD.
    Track 1, start time 00:02:00
    Track 2, start time 02:50:71
    Track 3, start time 05:40:53
    Track 4, start time 09:42:58
    Track 5, start time 12:36:34
    Track 6, start time 15:41:08
    Track 7, start time 18:19:35
    Track 8, start time 21:08:31
    Track 9, start time 23:08:14
    Track 10, start time 26:26:39
    Track 11, start time 29:28:56
    Track 12, start time 33:04:62
    Track 13, start time 36:49:06
    Track 14, start time 39:31:60
    Track 15, start time 42:10:31
    Track 16, start time 42:52:14
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 20 24 32.
    The drive CDRW speeds are: 4 8 16 20.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG CD-ROM SC-148A, Rev B402
    Drive is empty.
    The last failed audio CD burn had error code
    4000(0x00000fa0). It happened on drive D: _NEC DVD_RW
    ND-2500A on CDR media at speed 4X.
    toonz i really need your help now!!!
    bump

  • Error 2131: can't burn CDs

    I recently acquired an iShuffle and started using iTunes 9, which I haven't used before. I'm trying to burn an Audio CD but, after introducing a virgin CD (which the program do recognizes) and as soon as the burning process begin my computer opens the CD tray and shows the message "Burn process failed. Unexpected error (2131)" (actual text in English may be different since I'm using the spanish version).
    Is there some sort of patch I can download? I found a thread about this error but centered on Dell models, although a poster commented that some Toshiba models show this error precisely. However, the thread is rather old and already closed. Is there any help available now?

    I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
    Jr

  • Unknown Error 2131 - Can't Burn CDs

    A few months ago I had to replace my XP computer with a Vista computer. Ever since then any attempt to burn a CD has errored out. I've tried all the different tips and tricks but still nothing.
    Any help please?

    I think I fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
    Jr

  • PLEASE PLEASE HELP ERROR 4261 CAN'T BRUN CD'S

    SOMEONE PLEASE HELP ME I CAN 'T BURN ANY CD'S AFTER INSTALLINF 7.02 ITUNES. I WILL BEGIN TO BURN, IT PROCEEDS TO "CHECKING PLAYLIST" THEN "WRITING SONG" THE CANCELS BURN!!!! I HAVE GONE THRU A WHOLE PACK OF CD'S. oNE ERROR MESSAGE SAID THAT THE CD HAD TO BE CALIBRATED BUT I DON'T KNOW WHAT THAT MEANS?! PLEASE HELP!!!!!!

    I have this problem as well. I can burn CDs at the highest speed using both media player and Sonic. I have:
    1. repaired, uninstalled and reinstalled itunes
    2. uninstalled and reinstalled my CD burner and IDE channels in device manager
    3. disabled my anti-virus software
    4. Updated my burner drivers and intel chipset drivers to the latest version
    5. turned off the DLA on the burner properties
    6. disconnected from the internet
    7. selected the slowest burn speed in itunes
    8. tried 2 different CD brands (memorex and maxell)
    9. uninstalled some misc junk software that was on my pc, just in case it was causing the problem.
    It will setup the cd by burning all the track labels, but stops usually partway through the first song, sometimes it does make it to the second song.
    Any help would be appreciated quite a bit. Seems like a common error, but with few solutions.
    Here is the diag data from itunes:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dell DE051
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
    IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________E113___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: HL-DT-ST DVD+-RW GWA4164B, Rev E113
    Audio CD in drive.
    Found 7 songs on CD, playing time 19:00 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:55:61
    Track 3, start time 06:46:15
    Track 4, start time 09:39:39
    Track 5, start time 12:20:45
    Track 6, start time 14:40:72
    Track 7, start time 16:45:18
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
    Dell   Windows XP  

  • APPLE -- are you listening? We can't burn CDs!

    I have spent a lot of hours trying to burn an audio CD, to no avail. I just wondered if Apple had considered that people will refuse to buy music from iTunes if we can't burn audio CDs.
    I'm desperately needing to burn ONE song onto a CD. I bought it from iTunes, but now I have to go and find the CD at a store somewhere. Do you suppose Apple will give me my money back?
    This is really frustrating!!!
    (Oh,I've checked every help system Apple provides, in case you're wondering. Nothing works.)
    IBM Thinkpad   Windows XP  

    Did it all. Updated windows. Uninstalled iTunes and Quick Time. Cleaned out temp files, etc. Reinstalled iTunes and Quick Time. Changed burn speed to 4x. Used new discs of a different brand.
    It ACTS like it is writing... goes through each song as if it is burning the CD. CD drive runs. Ends up showing the "finished" CD in the pane on the left in iTunes (just above the playlists.
    However... the disc is still empty! Nothing on it when you look at it in "My Computer" or "iTunes" or Windows Media player. This is downright depressing. There is so much music... so little time!! Help!
    I can import purchased CDs just fine, by the way.
    Oh... and thanks for sticking with me on this. I know there are probably a fair number of people with the same problems...
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    IBM 2686DHU
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: ATI MOBILITY RADEON X300\ATI MOBILITY RADEON X300
    IDE\DiskFUJITSUMHV2060AH______________________00840096, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STRW/DVD_GCC-4242N_______________0J04___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: HL-DT-ST RW/DVD GCC-4242N, Rev 0J04
    Drive is empty.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4242N on CDR media at speed 4X.

  • Can't burn CDs in iTunes

    I can't burn CDs in iTunes. I get "The attempt to burn a disc failed. An unknown error occurred (4261). I have tried to reduce the speed - didn't work. I have never had a problem before - but after I downloaded the new version of iTunes, I can't burn. I know the burner works because I can burn using NERO. Please help!

    I'm assuming you have already resolved the issue, but if you have not, I would recommend that you uninstall iTunes completely and remove anything related to Apple on your computer including Quicktime. See this post for what you need to remove: http://mismike.blogspot.com/2008/03/itunes-wont-close-on-windows-xp-sp2.html. Good luck.
    -NKA

  • Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

    hi,
    I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the  cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger). 
    Please help
    Thanx

    iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
    Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
    Also, make sure the your other firmware & drivers are up to date.

  • Can't Burn CDs (emachines T3830) - used to be able to

    All of a sudden, I can't burn CDs. I was able to up until recently. I installed the Acura TTS software to allow me use my IPOD in a new car and was wondering if anyone knew if this interfered with the burn function. Orif the CD diagnostics indicate some other problem?
    Here are the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    GATEWA SR84510A
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    IDE\DiskWDCWD800BB-22JHA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskeM_____Bay_Reader_____1.00, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.01, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.02, Bus Type USB
    USBSTOR\DiskeM_____Bay_Reader_____1.03, Bus Type USB
    IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.00___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: HL-DT-ST RW/DVD GCC-4481B, Rev 1.00
    Audio CD in drive.
    Found 10 songs on CD, playing time 36:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:25:30
    Track 3, start time 08:09:17
    Track 4, start time 11:45:27
    Track 5, start time 14:54:67
    Track 6, start time 18:08:62
    Track 7, start time 22:04:47
    Track 8, start time 25:36:07
    Track 9, start time 28:27:65
    Track 10, start time 32:19:45
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: HL-DT-ST RW/DVD GCC-4481B on CDR media at speed 4X.

    Please assist. Am an English teacher and thus a total technophobe - so please keep it simple!
    Using iTunes to burn CDs has become increasingly impossible; I keep getting Error 4310 messages. I've used a CD-ROM cleaner disc to check there's no prob with the laser, but that's made no difference.
    I ran CD Diagnostics and...
    TriGem Computer, Inc. Emachines
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Cdr4_xp (5.1.0.209),
    UpperFilters: Cdralw2k (5.1.0.209), GEARAspiWDM (2.0.4.3),
    Video Driver: Intel(R) 82810 Graphics Controller\Intel(R) 82810 Graphics Controller
    Found aspi32 running.
    IDE\DiskSAMSUNGSV2042H________________________PK100-19, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG CDRW/DVD SM-308B, Rev T100
    Audio CD in drive.
    Found 20 songs on CD, playing time 73:59 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:38:00
    Track 3, start time 07:13:15
    Track 4, start time 11:03:30
    Track 5, start time 13:51:32
    Track 6, start time 17:22:30
    Track 7, start time 20:54:65
    Track 8, start time 24:51:72
    Track 9, start time 28:53:55
    Track 10, start time 32:47:40
    Track 11, start time 36:36:07
    Track 12, start time 40:03:10
    Track 13, start time 44:03:72
    Track 14, start time 47:44:67
    Track 15, start time 51:35:60
    Track 16, start time 55:36:50
    Track 17, start time 59:25:52
    Track 18, start time 63:14:25
    Track 19, start time 66:44:37
    Track 20, start time 70:02:07
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8.
    The drive CDRW speeds are: 2 4 8.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.
    Any sage advice, folks?
    Cheers
    Beldo

  • Device filter Problems, can't burn cds in iTunes, Blank CDs appear to have

    Problem was first noticed because I can't burn CDs in iTunes.
    The problem is that all blank CDs show that they have no space on them available. If I look at the properties of a blank CD, they show 0 bytes used, 0 bytes free and 0 bytes available.
    By removing the upperfilters and lowerfilters in the registry, (accoring to the Microsoft prescribed method for this problem found at http://support.microsoft.com/kb/314060) the problem is solved for my whole sytem except for iTunes. iTunes then tells me that "the registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."
    I reinstall or repair iTunes and then iTunes opens fine but I can't burn with iTunes or any other program since I am back to all blank CDs showing there is no space available.
    The iTunes toubleshooting Fac found at http://docs.info.apple.com/article.html?artnum=302976 has been tried also and does not change the problem of blank CDs having no space available.
    Here are the cd diagnostics: (Run with my whole system working except iTunes burner)
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway ESSEX2
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce4 MX 440 (Gateway)
    NVIDIA GeForce FX 5200 (Gateway)
    Connected Device Information:
    DiskDrive, WDC WD2500JB-53EVA0, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Gateway Essex2   Windows XP  

    Same problem here!!! This is driving me crazy. Glad to see it isn't me not knowing what I am doing when a couple of months ago I had no problems now as of last night after trying to burn to a CD I had the exact same issue.

  • Error 4315 unable to burn CDs

    When ever I try to burn a play list to CD, the burn process starts, looks like it's going and then I get an error message saying the burn failed because of an error 4315. I'm reasonably certain that I was able to burn CDs from iTunes in the past and wonder if some update of iTunes broke this feature. I don't have any problem burning CDs from other programs. I've seen postings for this error before, but it does not appear that any one ever found a solution to this. It seemed the only workaround was to transfer the music to an iPod and then use another program to convert it to either MP3 or some other general Windows fomat, but I do not have an iPod and would rather avoid having to buy one just to burn CDs. Does any one have a clue what this error means or have a solution now? Is it really possible now to burn CDs from iTunes, I got a different error when I tried to do this with a second system I had. If I can't burn CDs from iTunes I may have to consider going back to another Music service/software.
    Dell Dimentin 8400   Windows XP  

    This is the diagnostic print from my i-tunes:
    Microsoft Windows Vista Home Edition (Build 6000)
    DIXONSXP DIXONSXP
    iTunes 7.7.1.11
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.0.1.5
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 60612AC588C35EB6
    Current user is not an administrator.
    The current local date and time is 2008-08-22 14:50:18.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** CD/DVD Drive Tests **
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.0.7.3),
    E: TSSTcorp CDDVDW TS-L632H, Rev TMC0
    Audio CD in drive.
    Found 18 songs on CD, playing time 63:14 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:31:37
    Track 3, start time 07:30:67
    Track 4, start time 11:32:05
    Track 5, start time 15:56:67
    Track 6, start time 19:46:47
    Track 7, start time 22:46:67
    Track 8, start time 26:23:25
    Track 9, start time 30:37:07
    Track 10, start time 34:14:62
    Track 11, start time 35:16:65
    Track 12, start time 39:02:00
    Track 13, start time 40:36:65
    Track 14, start time 44:55:37
    Track 15, start time 48:21:05
    Track 16, start time 53:09:50
    Track 17, start time 55:18:65
    Track 18, start time 59:37:32
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 24.
    The drive CDRW speeds are: 24.
    The drive DVDR speeds are: 24.
    The drive DVDRW speeds are: 24.
    The last failed audio CD burn had error code 2131(0x00000853). It happened on drive E: TSSTcorp CDDVDW TS-L632H on CDR media at speed 0X.

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • I have OS X 10.9.4 version. I want to burn a CD-RW. After inserting the CD it's ejecting on its own. Kindly help. I can't burn songs on it.

    I have OS X 10.9.4 version. I want to burn a CD-RW. After inserting the CD it's ejecting on its own. Kindly help. I can't burn songs on it.

    CD/DVD Loading Problems                        
    CD/DVD Sharing
    CD/DVD Drive - Troubleshooting See troubleshooting section.
    CD/DVD Drive - Troubleshooting (2)

  • Getting an unknown error when trying to burn cds!

    Ive had itunes for awhile, but now I'm getting an unknown error (261) when trying to burn cds from itunes. Ive upgraded to the latest itunes and have tried a few different types of blank discs but to no avail. Other than this error, the actual cdr drive seems to be working fine. Can anyone help? thanks

    trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

Maybe you are looking for

  • Why No Desktop / Screen Saver Photos After Upgrade to 3.3.1?

    After upgrading to Aperture 3.3.1, no Aperture Desktop / Screen Saver images appear. Message "Unable to locate XXX" comes on. When I went into System Preferences, I find my iPhoto Library I have but NO Aperture Library & resulting Projects & Albums.

  • IPhoto '08 corrupts EXIF data on export

    Hello All, In using iPhoto '08 (including the latest update to 7.1) I am noticing the when I export files the EXIF data is getting corrupted. My original files are fine--all EXIF data shows up properly, and galleries which I post to that are capable

  • Can't Find Pattern Swatches - Help Please

    Very new to Illustrator, ( CC ) sorry. I'm trying to make a repeating pattern, but any way I access it, there are no patterns in the pattern libraries, only color schemes for those patterns. Where did the patterns go? How do I get them back?  The cat

  • Recommended product for scratch removal?

    I have the black 60GB 5th Gen Ipod. I have been using it for years, but by now my screen has become scuffed and scratched. I want to purchase a product to remove the scratches, and then a film or cover to protect it (the previous cover I had is what

  • Installed a security update and can not open my computer. Will not accept my password

    Installed an update and cannot open my computer. Will not accept my password. Running mountain lion. Have not used the login screen since I bought  the computer, but now it pops up when I turn it on and i can't get by it.