Top 1/2 inch of screen not displaying

Made a dumb mistake today leaving my touchpad on top of my car and drove off. The It flew off when I made a turn. Everything seems to be working except for top 1/2 inch of the screen isn't displaying, but touch function still works.
I am wondering which part needs to be replaced or repaired?
Post relates to: HP TouchPad (WiFi)

It could be the display under the touchscreen that has been damaged. Not sure which part needs to be replaced but it will most likely need repaired.
You can call the HP WEBOS support line to setup a repair or further troubleshoot the issue at 1-877-426-3777.

Similar Messages

Screen not displaying correctly. It keeps moving as the mouse moves

Screen not displaying correctly. It keeps moving as the mouse moves

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

Top part of MSN homepage is not displaying. Works in Chrome.

Today, for the first time, the top of the MSN homepage is not displaying. It cuts off just below the top of the 9 scrolling windows. Thought it may be an MSN problem, so I opened up MSN in Chrome and works fine. Cleared cache and still not working. Any suggestions would be appreciated.

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My screen not display propely

i have problem wth my iPad2.the screen not display propely.pls help me

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Wallstreet G3 top left quarter of my screen not working.

I have a PowerBook G3 (Wallstreet), and had OS 8.5 installed and running fine. I have recently upgraded to Tiger using Xpostfacto adn now have a problem with my display. If the screen resolution colour is set to Thousands I have different coloured lines appearing all over the screen and offset but following the cursor. When I change the colours to Millions the lines only occour in the top left quarter of the screen and still follow the cursor all over the screen. I have connected the PowerBook up to my TV using the S-video out and the problem persists on the TV too. I have tried resetting the PRAM and NVRAM but the problem still persists. I have even erased and re-installed OS 8.5, 9.1, 10.1 and 10.4 on seperate occcasions and the problem was happening on them all. Anyone know what else I could try to fault find?
Thanks in advance.
Oliver

Oliver,
The move to Tiger will not cause a hardware failure, but the definitive test for a logic board issue is the same problem occuring on an external monitor and also when booting to a CD.
However, give this a try and see what happens:
- If you still have 9.x installed, start up with shift key down (extensions off) and see if the problem persists.
- If no 9.x installed, boot to your 9.x CD with shift key down (make sure you see the 'extensions off' message) and test.
If the problem is gone, you can use the powerbook by disabling the ATI extensions in both 9.x and 10.x.

Interactive report: third screen not displaying

Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC2'.
      IF R_SELFIELD-FIELDNAME = 'LIFNR'.
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PM

Use both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.                      " Field name SPMON
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'.              " ELSE FIELDNAME LIFNR
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
        SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
Regards,
Gurpreet

Variable Screen not display in Web

Hi all
When i execute the Query ZBP02_Q001 in Web, the Variable Input Screen of the Query is not display first,but display the content of the ZBP02_Q001 directly in the Web. All of the Varibale is not mandatory;
i am using BI 7.0;
Anyone can give a help!
Thanks in advance.

Hi Cao,
May be your infoobject are holding constants, which led to direct execution without the selection screen.
Inorder to get the selection screen, select the infoobject and make its settings as optional and it will be displayed in your selection screen.
So whenever you use optional for an infoobject, that specific infoobject alone will appear on the selection screen.
Regards
Thenmuga Selvan

Captivate 6 Slide Audio screen not displaying correctly

Upon trying to rerecord a slides's audio today this screen opened up - I could record, but not save because the save button is not displaying. I was able to record new audio on the same project on Friday. I tried deleting and recodring new audio and the same screen came up. I tried a different project - same thing happened. I rebooted twice. Any ideas?
Thanks!
Rachel

Hello,
If you check the address bar of your screenshot, you will see that you are in "C:\Documents and Settings\[user name]\Application Data\Adobe" folder
Might be a possiblity that "Local Settings" folder is hidden, click on Tools -> Folder Options, under View tab, you have the option to "Show hidded files and folders"
You will see Local Settings folder once you click on OK, then you can access C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe and rename "Captivate 6.0" folder.
Hope this helps !!
Thanks,
Vikram

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

IPad air screen not displaying correctly

My iPad Air screen has recently started displaying with a pink hue in two of the corners, showing as a medium sized oval in one corner and a small circle in the other. There are also some vertical pink streaks that are less marked. It's really noticeable when the screen is displaying a white background. The only recent changes I have made is downloading the new IOS 8 update. There has been no trauma or damage to the iPad. It is still covered under the 1 year limited warranty. is there any way to fix this in my own?! Thank you!

Hello there katelynlc,
It sounds like you have some graphical anomolies on your screen that have a pink hue. If it is a software issue it will be resolvable by either first resetting the iPad:
Turn your iOS device off and on (restart) and reset
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Or backing up and restoring your iPad as a new device:
iOS: How to back up your data and set up your device as a new device
If restoring as new does resolve it, restore your backup and verify it still works.
If not, then the iPad will need service:
iPad Repair and Service - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Qosmio X305 screen not displaying like my desktops LCD screen

My screen seems to be displaying dull images.
I'm kinda concerened, because it's an LCD screen, and its not displaying like my desktops LCD screen.
I put the brightness up, and that helped to see the images better, but they still are not of the quality they should be.
Is there a way to fix this? Or is that just how it is?

Many Desktop LCD Monitors can get very bright, much brighter than most notebooks. So it may just be how it is. Perhaps you could go to the shops and compare it to other X300's on display.
Try resetting or modifying the Contrast/Colour/Brightness settings in the nVidia control panel.

Z1 screen not displaying

I had taken mobile 3 days ago..But now i am facing problems that is screen is not displaying but phone is working. What is the reason for it.

Hi vinnu,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
This may be related to a software based issue, I first suggest that you hold down the Power Key and Volume Down key together and restart the handset.
If this has not affect then I can only suggest that you try performing a software repair on the handset, this can be done by doing the following
PC Companion
To repair the phone software
1. Install PC Companion on a Windows PC from Support
2. In PC Companion, under Support Zone and click Start.
3. Under Phone Software Update, click Start.
4. Click repair phone.
5. Follow the on-screen instructions.
I apologize for any inconvenience this may cause.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

2006 Mac Pro + NEC 3090 - grey screen not displayed during boot

I have a September '06 Mac Pro 1,1 (Woodcrest variant) hooked up to an NEC 3090 30" LCD monitor, running OS X 10.5.7. Previously, I was using an Eizo S2110W 21" LCD; turning the monitor and computer on would cause the following to be displayed (in order):
1. Light grey background with dark grey Apple logo with spinning thing.
2. Solid blue background.
3. Leopard wallpaper.
4. Log-in dialogue.
Since using the NEC, the grey screen is not displayed at all: the display stays blank until the blue screen is displayed, and then the Leopard wallpaper and so on. This is using the 2560x1600 native resolution of the display, and has occurred using both 10.5.6 and 10.5.7.
If I change the resolution to 1280x960 and boot, the grey screen is displayed. If I change it to 1600x1200, I get weird corruption on-screen during the period when the grey screen should be displayed; for some reason, this includes part of the desktop wallpaper I was using before I rebooted.
Resetting the non-volatile RAM using Command-Option-P-R works for the very first time I boot the computer, though the grey screen is displayed at very low resolution. If I reboot from the log-in dialogue immediately afterwards, normal behaviour occurs - i.e. the blank screen.
The upshot of all of the above is that if I want to boot into Windows, or install OS X (e.g. when Snow Leopard comes out), I have to remember to boot into my existing OS X installation, change resolution, reboot whilst remembering also to hold down the ALT/Option key. It would be much easier if I could do away with having to change resolution.
I have tried connecting the monitor to a PPC Mac mini at 1600x1200 (it won't go any higher), using Tiger 10.4.11 (not sure of exact version - the latest). At this resolution, the grey screen is displayed.
Using a '08 MacBook Air (first generation) and the supplied DVI adapter, also at 1600x1200, nothing is displayed on the NEC until I get to the log-in screen. This occurs if the NEC is set to be the primary display or the secondary one - the only difference is where the log-in dialogue is displayed. I am not familiar with dual-screen behaviour, so I can't say whether anything is supposed to be displayed or not (i.e. does the grey appear on both displays?).
I have been in touch with NEC Europe support on this issue, who suggested it might have something to do with the 10.5.7 release. I know this not to be the case, as it was occurring prior to 10.5.7 being released.
Any ideas?

Put more of your hardware listed in your profile.
I looked and don't see you list your graphics card anywhere.
Graphic card it came with was either X1900 (watch for heat and dust bunnies and clogged vent);
OEM 7300GT (seems unlikely).
You could have replaced either with 8800GT or ATI 3870.
Require 10.5.2+ ideally 10.5.6+.
Some problems cropped up with 10.5.7. 10.5.7 doesn't work on some (many) 3rd party displays and stay with 10.5.6 if necessary until it is fixed or resolved.
But you say it happens with 10.5.6 also, and was doing so before 10.5.7? which makes your problem somewhat different or unique.
Zapping PRAM or NVRAM reset obviously shouldn't be needed repeatedly. And your graphics card probably needs to be replaced, or test with another card to rule it out.

IMAC 21.5-inch, Mid 2011 not display internet news pictures

Help, please. My iMAC 21.5-inch, Mid 2011 does not display internet news pictures. How can I 'fix' this?

I had no problems watching the streams & videos using FF v23.0.1.
Make sure you are using the latest version of Adobe Flash Player
Check Flash Version
Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_1 0_4
Follow the instructions closely, such as quitting ALL applications first before installing. Repair permissions and restart your computer after the installation is completed.
Authored by Klaus1
Since I cannot read German, I was wondering if there was some sort of "Help" listing at the bottom of the website you linked? If so, there should be a section or a FAQ section that should tell you what you need and/or the system requirements to watch their streams & videos.

LOVs in the param screen not displaying in ora10g(9.0.4)

Hello,
Development is in linux. deployment in windows. when i compile .rep paramscreen is not displayed correctly. LOV columns with SQL is not with dropdown. I need help to overcome this.
V.Parandaman

Hi crazymatts,
Thanks for ur reply.
There is no data in the text variable (0CALMONTH).
But i think the structure atleast gets displayed in the output,am not gettin even that.
And there is no reference characteristics on the text variable.Its a manual input variable which i will be using in my code.
Thanks,
Shreya J.
Edited by: shreyaJ on Nov 23, 2011 8:12 AM

Top 1/2 inch of screen not displaying

Similar Messages

Maybe you are looking for