Top 10 Aperture Suggestions for 1.01

1. Allow us to to export RAW files directly to Photoshop/Adobe Camera RAW if we wish (and treat the result as a separate version).
2. Projects on multiple drives.
3. Curves! also Color Balance Controls.
4. Drag and drop from the import pane to any project (right now if I am importing to multiple projects I have to import, open the pane again, import, open the pane again)
5. Allow 2 copies registered to the same person to run at the same time on a network (essential for those of us with desktops & powerbooks).
6. Editing of all metadata including EXIF data.
7. Open Source Vault specs.
8. No more modal dialog boxes (or at the very least display them properly as sheets). It is especially important that the tasks dialog box be non-modal.
9. More drag area between panes (basically all lt grey should be drag/resize areas). Also no fixed sized dialog boxes especially the metadata dialogs.
10. Non modal export

1.
Support for exporting RAW images to other applications is critical, as Raul says.
AND it is critical that all metadata associated with a RAW file is exported as well.
2. With a large library created over a period of time with numerous cameras, all shot RAW, there needs to be broad support for all RAW formats SOON. Otherwise I will have some pictures in iView and some in Aperture. More likely I'll use Aperture to sort through a shoot, and then use Photoshop and iView thereafter.
Without these two improvements Aperture is not so much a workflow tool as it is a totally cool digital light table.
dual g5 2ghz Mac OS X (10.4.3)

Similar Messages

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

Check this website to see if your device is eligible for this program: https://www.apple.com/ca/support/iphone5-sleepwakebutton/

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Suggestions for new sound interface

I've been working with a Tascam US-122 for a while. It is a USB device
and I've been running into a lot of latency issues. Can someone suggest
a few firewire-based interfaces in the $300-400 range that would compliment
my setup? Thanks!

Apogee stuff is the top of the line for A/D (although I haven't heard a comprehensive description of the difference between their pro and prosumer level products)
If you need more inputs than the Duet provides, check out Presonus Firepod. $400, and it's got 8 ins/outs as well as a S/PDIF input so you can add on anything with a S/PDIF output later. It runs real well, with zero latency monitoring and DI instrument inputs. I've been satisfied with mine, and I added an Apogee Rosetta AD to the S/PDIFs..

Suggestions for 808 PureView and Symbian Belle

Hi friends,
I am a proud owner of astounding (and worst marketed extra-ordinary device) 808 PureView. Biggest compliment to it is that it has replaced my SGS2. Yes, truly.
After using 808 for some time now I am quite happy but disappointed with certain things. Few things are so minor that I am surprised why Nokia removed it or didnt implement.
So here I am presenting a list of things which I would request Nokia to fix or implement. I will also request all of you here to add to the list so that Nokia gets a direct feedback and can improve the device and software. Thanks !
Camera:
1. Slow shutter speeds
2. Full resolution in various Scenes modes
3. Pics with AutoFlash mostly comes dark in edges in Indoors
4. Slightly faster Auto-Focus with soft shutter button
Gallery:
(I know about other thread but this is a consolidated list)
1. Batch functions (send, share)
2. Albums
3. Folders
4. Tabbed interface (All, Images, Videos)
5. Sort by Date, Name, Type, Size, Location, etc.
6. Send via NFC option (everybody does not read Manual )
7. Ability to trim parts of video (and to join parts, if possible)
Contacts:
1. Labels please !!!
2. Thumbnail view (atleast in Groups)(could be first-ever. Android has partial implementation)
3. Contacts with latest Social updates(tweets or Facebook activities) to come second-top after Favourites (convenient and another first)(switch on-off from Settings)
4. Additional Tab in Contact's view showing all communication with him/her (Calls, E-mails and Messages)
5. Another optional Tab showing his/her last 5 Social updates
Messaging:
1. Tabbed interface (Conversations/Folders/(optionally) E-Mails)
2. Forward icon alongside Reply icon
3. Individual Contact's SMS\Email tone (such a little but practical feature)
Telephony:
1. Detailed Call log (Settings>Extended View)
2. Video Call button
E-Mail:
1. E-Mail Popups (probably with Reply option)
2. Cleaner tabbed interface
3. Pinch-to-Zoom and Wrap function
4. Archive option in GMail mails
5. Go to next email after deleting and not the Inbox (its really annoying)
Videos:
1. Large Thumbnail option
2. Better support for Matroska (mkv)
3. Better subtitle support (black fonts???)
4. Options for Brightness and Contrast
Music Player:
1. Folders Tab
2. Editable equaliser
I again request to provide suggestions and I will add them in OP (with your name). Lets help Nokia make great OS and Product even better. And in my experience, they have always seriously listened to their customers and brought the improvements.
Good Luck !

Nokia thank you for last updates..the 808 is quite perfect now!!
Let's update some last suggestion for Nokia
Camera:
1. Slow shutter speeds / FULL Shutter priority mode (with flash and auto/manual ISO....i'm not able to use flash with high ISO and slow shutter speeds)
2. Full resolution or 12MP / 8MP resolution in various Scenes modes
3. Pics with AutoFlash mostly comes dark in edges in Indoors
4. Slightly faster Auto-Focus with soft shutter button
5. Flash EV Compensation
7. (Hardware) Image Stabilization with low light
8. better White Balance..more options..
9. square (1:1) and 3:2 modes
10. higher FPS available with low res videos
11. Camera noise fix, lots of digital noise on the right side of the screen (purple cast) when taking pics in darker conditions without flash, something is interfering..
12. nedd much better performance for the CAF in video mode, it doesn't work on FP2
13. Lumia photo tools / add-ons: Cinemagraph lens, Smart Shoot lens, Panorama lens, Bing vision..
Gallery:
1. Albums / Folders
2. Tabbed interface (All, Images, Videos)
3. Sort by Date, Name, Type, Size, Location, etc.
4. Send via NFC option (everybody does not read Manual )
5. Ability to trim parts of video (and to join parts, if possible...improve VideoPRO please..audio editing!)
6. Improve PHOTO Editing too, more controls (light/shadows, sharpness, fixed ratio for photo crop like 3:2 and 1:1, blur control..)
Contacts:
1. Labels please !!!
2. Thumbnail view (atleast in Groups)(could be first-ever. Android has partial implementation)
3. Contacts with latest Social updates(tweets or Facebook activities) to come second-top after Favourites (convenient and another first)(switch on-off from Settings)
4. Additional Tab in Contact's view showing all communication with him/her (Calls, E-mails and Messages)
5. Another optional Tab showing his/her last 5 Social updates
Messaging:
1. Tabbed interface (Conversations/Folders/(optionally) E-Mails)
2. Forward icon alongside Reply icon
3. Individual Contact's SMS\Email tone (such a little but practical feature)
4. More smart use of Words Suggestions in T9 Mode..priority for shorter words!
(in Italian...i want to write "ON" and i touch ONLY the 6 button two times, but sometimes it suggests "NO" and/or longer words like "ONLY","NOBODY","NOTHING"...but not "ON"!! (In Italian language, i don't know if it does the same in English!)
5. In conversation or with Whatsapp, in horizontal mode with QUERTY and Words Suggestions enabled, it's impossible to read the last messages during writing.
6. much smaller text option
7. in conversation view, the letter icon and the notification of a new message doesn't disapppear if you've only read the sms, without giving a reply! I suggest that a tap on the yellow letter icon on the right in conversation mode will change the sms status from unread to read
Telephony:
1. Detailed Call log (Settings>Extended View)
2. Video Call button
4. more notifications on notification bar
5. improve social network apps and connections between gallery / notification bar and them
E-Mail:
1. E-Mail Popups (probably with Reply option)
2. Cleaner tabbed interface
3. Pinch-to-Zoom and Wrap function
4. Archive option in GMail mails
5. Go to next email after deleting and not the Inbox (its really annoying)
6. Email notification like with missed calls or sms on the lockscreen.
Videos:
1. Large Thumbnail option
2. Better support for Matroska (mkv)
3. Better subtitle support (black fonts???)
4. Options for Brightness and Contrast
Music Player:
1. Folders Tab
2. Editable equaliser
LET'S GO!!

Suggestions for forum improvements

Wishlist (in sequence of appearence):
<ol>
<li> [Distinction between answeredsolved closedunsolved functionality|Suggestions for forum improvements]
<li> [Enhance SCN search|Re: How to close a question which is not answered]
<li> [Friends-And-Foes functionality|Re: "Kill List" suggestion;
<li> [Metrics for quality measure|Re: How to close a question which is not answered]
<li> [and information on the direction of the forums|Re: How to close a question which is not answered - and other improvements...]
<li> [FAQ collection forum|Re: How to close a question which is not answered]
<li> [An open, overall SDN suggestions site|Re: How to close a question which is not answered]
<li> [More abuse categories|Re: How to close a question which is not answered - and other improvements...]
<li> [Personal status of the person posting|Re: Suggestions for forum improvements]
<li> [Improvement of formatting issues|Formatting issues in SDN postings (character limit and code tags)]
<li> [Stricter moderation|Re: Suggestions for forum improvements]
<ul style="list-style:circle!important;">
<li> [Penalising whoever answers basic questions|Re: Suggestions for forum improvements]
<li> [Cutting points/guestifying responders|Re: Suggestions for forum improvements]
</ul>
<li> [Visibility of number of people following a thread|Re: Suggestions for forum improvements]
<li> [Invention of u2018honour badgesu2019|Re: Suggestions for forum improvements]
<li> [Substitution of the points-system by:|Recognize the contributor;
<ul style="list-style:circle!important;">
<li>[Introduction of a secondary point-system|http://forums.sdn.sap.com/post!Re: Suggestions for forum improvements]
<li>[Designing a u2018recognition and votingu2019 system|http://forums.sdn.sap.com/post!Re: Suggestions for forum improvements]
<li>[Considering the honeypot system|http://forums.sdn.sap.com/post!/community [original link is broken] 9111575#9111575]
<li>[Inventing an event driven honouring|http://forums.sdn.sap.com/post!/community [original link is broken]9135164#9135164]
</ul>
<li>[Bring transparency to the moderator-elevation and maintenance process|How to become a Moderator in SDN Forums;
</ol>

Hi Marilyn,
Thanks a lot for the reply, it's good to see that even the not-so-polite rant postings are taken serious and get attention. I think that most of us truly appreciate the platform SAP is providing, but we're a bit tired with some of the application features/limitations. So I hope nobody takes offense when we're venting a bit...
Waiting for more input here.
I neither understand the more input (for what and by whom) nor the here (this thread or this forum). The missing functionality for dealing with unanswered questions seems obvious enough. At least that should be one topic that everybody agrees on. I suspect that the same applies to the rather poor search capabilities. Though as we can see in the forums, lots of people apparently seem to prefer to quickly shoot some questions instead of wasting their time with any research...
Continue to convince us please.
Is that a polite way of saying keep on whining? If yes, then no problem, I think we all need to do that from time to time...
If the feedback from the community is truly important, I'd say that there should be a public system for posting bugs/feature requests on which people could vote. This should be prominently placed in the forums and would allow easier feedback. The voting feature could be used to possibly limit the bugs/requested features to look at (e.g. top ten list) and then be classified by SAP based on implementation effort (with the usual disclaimer that no feature might ever be implemented just because it's wanted). Needless to say that it should be easy to search for already existing requests, but in general I'd assume that fairly soon there would be more voting (on top requests) than posting new ones...
To channel requests and avoid too many silly postings in this bug/feature tool one could imagine using earned forum points possibly as a currency for putting a value to the requests (i.e. I could vote to say if feature A gets implemented I'd pay it with N forum points, which are deducted from my account once the feature is present). I'm not sure if that is a good idea, but at least it might ensure that people who truly care about the platform enter their comments. At least it seems that often systems, which implement some artificial monetary system and try to optimize on cost, yield very good results...
Cheers, harald

Is it Possible to set Top and Bottom Margin for each section?

I've been googling and haven't found an answer to this problem.
I need to specify a different top and bottom margin for each section in my document. The "document margins" apply to the whole document, so I've set those to a low amount, and I can set the Layout Left and right margins - but the "Layout Margins" do not allow "top and bottom" only "before and after". This is a critical difference, because if you have 2 pages in a section, only the first page gets the "before" margin, and only the 2nd page gets the "after" margin. This is a little odd, and I'm frankly surprised we are in version 4 of this app - and you can't set top and bottom margins for each section.
If you insert a "layout break" on each page, then you can get the margins to reset for each page inside a section, but this is not an acceptable workaround as I need to setup templates for staff to use that will "flow" like a normal word processor.
Does any one have any suggestions?

On page 49 in the English Guide version it tells you about Lay-out margins. This is the text
*Defining Layout Margins*
*In a word processing document, a layout margin is the space around columns in a*
layout.
*To change the layout margin in a word processing document:*
*1 Click in a column.*
*2 Click Inspector in the toolbar, click the Layout button, and then click Layout.*
*3 To change the outside margins of the column(s), enter values in the Left and Right*
*fields under Layout Margins.*
*4 To specify the amount of space above and below the column(s), enter values in the*
*Before and After fields under Layout Margins.*
*The new margins can’t extend outside the page margins set for the document in the*
*Document inspector.*
I hope this helps.

Suggestions for updates?

I'd like to make a suggestion for the next update.
Can the the icons at the top of the screen be made to where if u touch them it takes you to the menu to change their status. Especially the wifi and Bluetooth icons. These menus are buried and takes several seconds to get to them just to turn them off or on....

Good ideas, tell Apple at the link below.
http://www.apple.com/feedback/iphone.html
Stedman

Interface suggestion for Collections and Presets windows

Hi,
I would like to suggest you an improving of the left part of the main screen. I wish - maybe one day - that you can modify the management of collections, presets, etc...
When you have a lot of Presets and Collections, and we need to switch between them asap, it's very difficult to scroll all of the list (...the scrollbar is also on the left ! Strange idea...)
The best idea will be to redraw the actual design : in that case, the title bar and their "contextual menu" still always visible.
A simple mouse clic would allow to uncollapse Collection or Presets lists very quickly on the top. All titles won't be never hidden.
Please, take a look at my screen capture (my suggestion) for a better explanation.
Thanx.

Hi thanks for help,
The thing is, I need all the data if the user wants to see Details, then I will need to display all rows. On the other hand, Sybase doesnt have the stdev function, I wrote a query that calculates stdev, but I will need to run the query once for each person, because it looks like this:
select
(SQRT((sum((MyFieldName - (select convert(dec(10,2),avg(MyFieldName))
From MyTableNameWhere
MyWhereCriteria and
abs(MyFieldName)>0))*(MyFieldName - (select convert(dec(10,2),avg(MyFieldName))
From MyTableNameWhere MyWhereCriteria and abs(MyFieldName)>0)))) /(select count(MyFieldName)-1
from MyTableNamewhere MyWhereCriteria))) 'StDev'
from MyTableName WHERE MyWhereCriteria
where MyWhereCriteria would be
where date = '07/03/2009' and name = 'John'
so some of the subqueries return multiple rows which is a problem..
I got error saing:
[Error] Script lines: 13-30 ------------------------
Subquery returned more than 1 value. This is illegal when the subquery follows =, !=, <, <= , >, >=, or when the subquery is used as an expression.
Msg: 512, Level: 16, State: 1

Suggestions For Lightroom

The first change Adobe should make for the improvement of Lightroom is this Forum. I personally find this forum extremely difficult to navigate. It's cluttered, difficult to read and seemingly archaic compared to the Apple Forums.
Here are my others suggestions for Lightroom:
-Allow the ability to select Quick Collection images and Delete them from the disk not just Remove them from the quick collection. The benefit here would be that we could select images from several different folders that might be of the same subject/situation that had been loaded at a different time but still are similar images to others in the collection. This would allow us to clean up redundant images from any number of different folders. Presently when we select Quick Collection images and hit delete it just removes them from the Quick collection leaving them on the hard drive. I want an option to get rid of them from the hard drive.
-When trying to move images from bottom of a gallery to the top of a gallery and there are hundreds of images, grabbing the ones to move up, when getting to the edge of the gallery, the gallery doesnt move consistently.
-When in the compare mode it would be nice to have the file name below each image in the bar that contains the Star rating and pick or reject flag.
-When in the survey mode it would be helpful to differentiate the X & / more effectively. Why not highlight the X in Red and leave the / the color that it is.
-Include a Preference option that allows us to always have the Spell Check enabled when a catalog is opened. Presently you have to continually remember to turn this feature on each time a catalog is opened.
-Spell check does not ignore when I select the Ignore option. Seems to be a bug
-When I select Check Spelling it comes up with the spell check box, up comes the suspect word. I click ignore and nothing happens, I select Next and nothing happens. Bug?
-Would be nice if P-Picks and X-Rejects could be toggled on and off with the corresponding key.
-when loading images from a camera card you have the option to have it load to folders. Presently it loads images to folders, dating those folders by the day the images were shot. It would be nice to be able to tell the loading procedure to create folders by the day images are imported.
-When loading images from camera card you can select a secondary destination. I would like to see the secondary destination look identical to the first destination. Not something completely different as it is now.
-When using the sequential numbering optin for renaming files on import, the last number in the sequence should be remembered by lightroom and the next import should take off where the last import ended. Photo Mechanic works like this as well as Nikon View and Picture Project.
-Is there a way to see more than one line of the caption in the Grid/thumbnail mode? If not that would be beneficial.
-When you select flags and rejects are hidden or shown, currently the grid view goes back to the top of the file/grid. It would be nice if the grid view would stay at the current selection
-would be nice if during the input of captions, while in the minimal Metadata mode, that the main Metadata window would scroll down as you type a long caption. Presently when a caption goes beyond the window at the bottom of the Metadata pane you have to stop and scroll the Metadata/caption pane down to see what you are typing.
-I change metadata in MS Expression and tell it to synch with original NEF. It does which you can see by taking the same image into Photoshop and looking at the metadata there. However, the same metadata does not synch in Lightroom even though I have save to XMP enabled..
-Bug? Going from Grid view to D-Develop. Adjust the exposure and Lightroom hangs up. Have to Force Quit LR to get it back.

Six changes that would be basic improvements - sorry if these look like bug reports, but they have lasted through all the updates and upgrades and I consider them to be overripe for improvement.
For mouse-heavy users it would be helpful to have a Grid icon in the toolbar in the Develop module, the same as appears in the Library module.
The consistency of having a Done button in all places that present a secondary work screen would make leaving those screens simpler.
When organizing folders, keeping the focus local after a Delete would be good, instead of the focus jumping up to a higher level as it does, requiring a search for your location. If you're making a lot of changes this can be time-consuming and frustrating. I know some other program do this, but not all and it's solvable.
When moving a folder of files, the last file doesn't get moved and could wind up in some random place if you don't suspect this and go after it to move it by itself. This seems to be unique to Lightroom.
In leaving Compare, it's not clear which image you're keeping because the filename isn't visible, only the rating (if used). Changing the rating to exit can disable the Done button. To get it back it shouldn't be necessary to swap the images. Why not use a more standard release action like the Escape key?
In LR 3.3, when using the noise reduction slider the option to update the whole filmstrip to use version 2010 is available only if the demonstration "compare" screen is retained with a box checked. If you uncheck that box, there's no way to get that screen back the next time, so the option to update to 2010 for the whole filmstrip at once is gone and subsequently requires one-by-one clicking to update. This could be simpler and faster.
I use LR every day and teach it, but I may have missed something so forgive my naming ills that have already been mentioned. Thanks for listening. DKD

Needed Varible ND Suggestions For 7d EFS 17-55mm Lens

Hi, I'm looking for suggestions for a varible ND filter for my 7D EFS 17-55mm lens. Wanting to shoot video on the high end towards the f/2.8 range of this lens. Currently, my sweet spot without a ND is anywhere from f/14 to f/18 bright/cloudy outdoors. I normally shoot at 1920x1080 at 24fps with my shutter speed at 1/50. As you know, the higher the aperture the brighter things get. At f/2.8 I'm totally washed out. I have a B+W UV XS-Pro filter that currently lives on the lens https://www.schneideroptics.com/Ecommerce/CatalogItemDetail.aspx?CID=1554&IID=8160
I see Light Craft Workshop has come out with a Rapid Variable ND lately that looks interesting. http://www.bhphotovideo.com/bnh/controller/home?O=&sku=1015993&Q=&is=REG&A=details
If you have any suggestions that would give me great results, I would sincerely appreciate it. Thanks, Ray

Personally I'd get a standard ND filter instead of a variable. Looks like 5 stop is what you need. I know B+W makes a 6 stop, you might be able to get that to work.
Perhaps variable NDs work well with video. When I looked into getting one for stills it seemed to me it just wasn't worth it if you're picky about your quality. Anything less than the SR was of dubious quality and even the SR had problems with the X banding at higher opacities. With stills you usually have some wiggle room over settings so having a 3 stop and a 6 stop, and stacked for 9 stop, was enough for my needs.

Your "suggestions for future features" is broken??!!

I really just wanted to leave you a suggestion for future features. Your system took me to a page that said i needed to be on the most recent version but alas I am! You even tell me so when I go to firefox.com! Hmmmm...... a little problem there.
Regardless, here is the feature suggestion i wish to make:
You've done a fine job of cleaning up the top bar in 4.0 to make the most of new widescreen displays so that we have more space for the page content vs. the browser stuff. The deal is, virtually all sites still use only about a third of the page width leaving tons of wasted space on a full screen view. Why don't you offer a way to move all the browser navigation, tabs, and tools wherever i prefer - like running vertically down the left or right side of the massively empty pages i see on my 24" monitor and even my little 11" laptop monitor?

You can leave your feedback/suggestion at this link: Apple Product Feedback

Suggestions for organizing folders?

I have way too many folders with subfolders, and my problem is I like to keep folders on my desktop with files I need to attend to in the near future. If I do not, then I will likely forget about it.
1.) Can anyone recommend a way to organize my folders so they always stay in the same spot in fixed places somewhere near the top of the screen, though I can still move other folders around on other parts of the screen? Almost like a dock for folders?
2.) Can anyone provide any other general suggestions for organizing folders for something like this?
Thanks!

I don't know of a way to 'pin' certain folders to specific locations in the desktop grid without pinning all of the other folders as well. You could try [DragThing|http://www.macupdate.com/info.php/id/633] or you could do what I do. I put my storage volumes in the dock and navigate them hierarchically and only put the folders that I need at the moment (projects) in the dock. It is not a good idea to have 'tons' of stuff on your desktop, especially if they are files (not necessarily folders.) The system has to store all of that info in RAM. At one point I thought I had a memory leak but it turned out to be a video file on the desktop that was using about a gig of RAM. Moved it into a folder and memory usage went back to normal.
According to you sig, you are running Tiger, but you are posting this on a Leopard forum. If you are using Leopard, you should also look into [Path Finder version 5|http://www.macupdate.com/info.php/id/6371/path-finder]. I would be very hard for me to live without it. There is +a lot+ of things you can do with it. (Including Smart Sorting, ie. list folders before files.) In my opinion, it is well worth the money.
Hope this helps,
D.

Any suggestions for an animation program using photographs that can be incorporated into iMovie or Final Cut express?

Any suggestions for an animation program using photographs that can be incorporated into iMovie or Final Cut express?

The MTS files will always be grayed out. Do not drill down into the folder structure. Select the top level of the AVCHD folder structure. If this is a hard drive it may take a very long time to load. People have reported 20 minutes to half an hour.
Other possible problems, conflicts with other software like Perian. Also if there is mixed media on the drive; media in different formats can make the directory unreadable. What are the exact specifications of your media? What settings are you using in FCE?

Top 10 Aperture Suggestions for 1.01

Similar Messages

Maybe you are looking for