Top 10 Retain tips for Lenovo XClarity Administrator

1). Subtasks appear to be running when main task is interrupted in Lenovo XClarity Administrator - Lenovo x86 servers
2). Learned EN4172 port pattern cannot be edited from the adapter table in Lenovo XClarity Administrator - Lenovo x86 servers
3). Chassis Node hard reset and IOM, CMM re-seat not supported on Lenovo XClarity Administrator - Lenovo x86 servers
4). Network Access Configuration unsavable by default due to invalid host name in advanced tab in Lenovo XClarity Administrator - Lenovo x86 servers
5). Firmware updates may fail after restart of Lenovo XClarity Administrator - Lenovo Flex System Enterprise Chassis
6). Primary CMM status in XClarity Administator UI may differ from CMM chassis map - Lenovo XClarity
7). System-Level power consumption History - Lenovo XClarity
8). Cryptic message when applying power actions to demo server - Lenovo XClarity
9). 'Create a new pattern from an existing server' fails on multinode system in Lenovo XClarity Administrator - Lenovo x86 servers
10). XClarity: Intel X710 extended port patterns for adapter are not correctly learned - Lenovo x86 Servers

I have upgraded from 2gb to 4gb RAM (Vista bu 64bit) but T400 was still slower than the old MSI notebook. I had MSI 12", 1.8ghz sempron, 2gb RAM, 160HDD with UBUNTU 8.04. Now T400 with P8700, 4gb DDR3, discrete Ati 3470. What really helped me was NOT using Vista at all! I'm now on RC of Windows 7, it's much faster (boot, turning off, and aslo system respose is I think 4 times shorter than Vista has). Just wanted you to know how are these systems different. But if I had a choice, I would go for some linux distribution. Sadly fingerprint reader and thinkvantage software are not supported
Message Edited by popo666 on 07-11-2009 10:20 AM

Similar Messages

Lenovo XClarity Administrator Performance

Are you interested in optimizing the performance of Lenovo XClarity Administrator in your enviornment? This white paper will provide you some tips and techniques to realize your performance goals.
Lenovo XClarity Administrator Performance White Paper

We can also understand the version via Login Windows of XClarity.

Spare tips for Lenovo 90W AC/DC Combo Adapter

Just got the Combo Adapter, and wanted to order a spare tip to charge my Motorola cell phone with it. Dumb question - will the spare tip plug into the power cord of the adapter, or do you have to use the dual-charge cable for the tip to work? I rarely charge two items at once, and would prefer to not travel with an extra cord.

yes it works with the T510.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

JK Adobe TV - Top 5 Tips for Working with Vectors in CC

Julieanne Kost has just blogged about her Adobe TV video on working with shapes and paths in Photoshop CC. It's actually not that new to Adobe TV, and has already had a lot of views, but we get a lot of questions here on the subject with CC, and there are some nice little tips in it. I certainly learned a couple of things. :-)
http://blogs.adobe.com/jkost/2014/01/top-5-tips-for-working-with-vectors-in-photoshop-cc.h tml
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/top-5-tips-for-working- with-vectors-in-photoshop-cc/

My apologies, but I really had no interest in a member's "answer", especially one that is so unhelpful. Assuming that you were responding to me (we are the only two commenter's at this point), I would not be inclined to read the Creative Cloud offers since this is something that I am not interested in. I bought the product the first day of offer, I did not rent it....just like I have in all the years past.

Tool Tip for Top Level Navigation - EP6SP2?

Hi,
Is it possible to provide tool tip for top level navigation.
We have only one level TLN and Detail Navigation. On mouse over of TLN objects is it possible to provide tool tip?
Thanks.

Hi Raja,
as Pankaj stated, the NavTagLib is the answer - but: it needs the LightFrameworkPage. And both together at the moment for example doesn't support Collaboration, means, if you click on some room, bang, error messages and nothing does work as expected.
If you don't need CollRooms, you might give it a try.
In addition, you can check out the "Hover effect", see http://help.sap.com/saphelp_nw04/helpdata/en/53/a16a3e54a2e946e10000000a114084/frameset.htm - it's probably not really what you want, I just want to point to that possibility (working within the standard framework page) for a complete overview.
The last possibility is to modify com.sap.portal.navigation.toplevel; the TLN entries are rendered through toplevelnavigation.js, methods printLevel/printLevel1Table/printLevel2Table.
Hope it helps
Detlev

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

How can I purchase an extra optical drive retaining bracket for my IdeaCentre K330?

How can I purchase an extra optical drive retaining bracket for my IdeaCentre K330? There was one retaining bracket that came with the DVD optical drive, but I bought a Blu-Ray burner as my second optical drive, and I would like to install it using the tool-less retaining bracket that came with the first drive. I couldn't find a part number for it online.

hey johnnyc,
i suggest getting in contact with our sales team about this
http://www.lenovo.com/contact/us/en/
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Hopefully useful tips for endless processing

I also posted this in reply to another user, but I think it might be useful enough to others that I will post it here so it's not so buried.
I'm just starting, after many, many hours, to see the light at the end of the tunnel with Aperture 3. I think A3 offers some great options, and is a diamond in the rough -- very, very rough, even in v3.0.1.
But I think I have some VERY USEFUL TIPS for you here (again this is after a lot of learning by pain... 4 different attempts to "upgrade" my A2.1.4 library (42K images about 200GB of images).
1st, and possibly most importantly the "SHIFT" key is your friend. You can use it when you restart A3 to stop the endless processing loop that A3 would fall into every time I upgraded or imported my library to A3 (or 3.01). All you need to do is hold down the "SHIFT" key while restarting A3, this should top all previously stuck processing as you upgrade your library. So use this tip after you first upgrade/import your library, if the processing bug hits. Then you have to be patient and go though your library and figure out where the problem files are (Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)
2nd, at this point you will need to systematically go through your library and figure out where the "problem" files are and "fix" them (in my case all of these worked just fine in 2.1.4 - go figure). I would start by generating thumbnails for all of the images in a project, one project at a time (I had 150 some in my library). When you get stuck in the "processing" loop again, you can restart A3 using the "SHIFT" trick, and maybe just try a chunk of images within that same project until you find where things fail again, and until you can get to the offending image (if it's a problem you won't be able to generate a thumbnail for the image -- and A3 will go into endless "processing" mode)
3rd, this sound like a horribly tedious process and it is. But I can offer you some useful tips. In my case, and others as well apparently, a lot of the offending files are 16-bit PSD or TIFF images, especially if they had adjustments applied in A2.1.4. In my case I had fewer than 50 of these, so I exported an original and a jpg for each of these files. I re-imported the jpg and deleted the PSD/TIFF from A3 (I kept the exported original for future use). These files would then generate thumbs without endlessly processing. The other type of file that I ran into problems with were stitched panoramic images (often over 30MP) that I had applied adjustments to in A2.1.4. I simply removed the adjustments and the generated thumbs for them (worked like a charm).
4th, download some good podcast, music or audiobook... this will take a long time.
Cheers, and look me up in FaceBook I started a group called "Apple Please Fix Aperture"

Danny,
Funny you should mention this.... (actually it makes you look a bit like a "schill", even though you are not)... nope, as far as I can tell there is no way to tell which specific images are causing A3 to grind to a halt.
Hence my comment:
"(Apple has done a LOUSY job in not identifying what specific images A3 is processing in the "Activity Window" -- Let Apple know if this really bugs you)" and similar previous ones in other posts.
I wonder if Steve, yes that one, knew about this, being the perfectionist he seems to be, if he would have this feature included in Activity Monitor ASAP, or more likely it would have just been fixed by now (more of a "one-button" solution). Anyone have his house #?
In any case, I please let me (us) know if this helps resolve your problems... and consider joining the Facebook group as well and maybe we can hope for a much better 3.x.x version in the very near future.

Give Me Some Tips For doing this report.

hi frd. help me in this report.
parameter : plant,material no,company code,storage location.
display: material no, material desc, UOM, ROL, warehouse, open po, open po qty, open pr no, open pr qty.
Kindly Give me tips for doing this report.
thank u
Pari Vendhan.R

Hi,
Its will not fullfill ur requirement but upto some extent...just have a look.
TYPE-POOLS : slis.
TABLES : mkpf,
         mseg,
         t001w,
         t001l.
TYPES : BEGIN OF ty_t001w,
          werks TYPE t001w-werks,
          name1 TYPE t001w-name1,
        END OF ty_t001w,
        BEGIN OF ty_makt,
          matnr TYPE makt-matnr,
          maktx TYPE makt-maktx,
        END OF ty_makt,
        BEGIN OF ty_t001l,
          lgort TYPE t001l-lgort,
          lgobe TYPE t001l-lgobe,
        END OF ty_t001l.
DATA : BEGIN OF it_mat OCCURS 0,
        mbln LIKE mseg-mblnr,         " Number of Material Document
        zeile LIKE mseg-zeile,         " Item in Material Document
        mjahr LIKE mseg-mjahr,         " Material Document Year
        bwart LIKE mseg-bwart,         " Movement Type
        matnr LIKE mseg-matnr,         " Material Number
        erfmg LIKE mseg-erfmg,         "Quantity in unit of entry
        erfme LIKE mseg-erfme,         "Unit of entry
        werks LIKE mseg-werks,          "Plant
        lgort LIKE mseg-lgort,          "Storage location
        umwrk LIKE mseg-umwrk,          "Receiving plant/issuing plant
        umlgo LIKE mseg-umlgo,      "Receiving/issuing storage location
        bldat LIKE mkpf-bldat,       "Document Date in Document
        budat LIKE mkpf-budat,       "Posting Date in the Document
        maktx LIKE makt-maktx,           "Material description
        name1 LIKE t001w-name1,           "Name
        name2 LIKE t001w-name1,           "Name
        lgobe LIKE t001l-lgobe,         "Description of storage location
        lgobe1 LIKE t001l-lgobe,     "Description of storage location
        END OF it_mat.
DATA : it_t001w TYPE TABLE OF ty_t001w
                 WITH HEADER LINE,
       it_makt TYPE TABLE OF ty_makt
               WITH HEADER LINE,
       it_t001l TYPE TABLE OF ty_t001l
                WITH HEADER LINE.
DATA : ls_layout TYPE slis_layout_alv,
       it_fcat TYPE slis_t_fieldcat_alv ,
       wa_fcat TYPE slis_fieldcat_alv,
       "lh TYPE slis_t_listheader,
      " ls TYPE slis_listheader,
       i_events TYPE slis_t_event WITH HEADER LINE ,
       "ls_event TYPE slis_alv_event ,
       w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20),
       ztabix LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_werks FOR mseg-werks,
                 s_lgort FOR mseg-lgort,
                 s_umwrk FOR mseg-umwrk,
                 s_umlgo FOR mseg-umlgo,
                 s_bwart FOR mseg-bwart,
                 s_budat FOR mkpf-budat,
                 s_mjahr FOR mkpf-mjahr NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK a1.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001w INTO t001w
                            WHERE werks IN s_werks.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying Plant'.
ENDIF.
SELECT SINGLE * FROM t001w INTO t001w
                          WHERE werks IN s_umwrk.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving Plant'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_lgort.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Supplying St.Loc'.
ENDIF.
SELECT SINGLE * FROM t001l INTO t001l
                          WHERE lgort IN s_umlgo.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Receiving St.Loc'.
ENDIF.
START-OF-SELECTION.
PERFORM field_cat.
PERFORM get_data.
*END-OF-SELECTION.
IF it_mat[] IS INITIAL.
    MESSAGE i000(8i) WITH 'No data Found'(m01).
*    EXIT.
ELSE.
    PERFORM process_data.
    PERFORM display_data.
ENDIF.
*&      Form field_cat
*       text
* --> p1        text
* <-- p2        text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MBLN'.
wa_fcat-key = 'X'.
wa_fcat-hotspot = 'X'.
wa_fcat-ref_fieldname = 'MBLNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material Doc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ZEILE'.
wa_fcat-ref_fieldname = 'ZEILE'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Item No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MJAHR'.
wa_fcat-ref_fieldname = 'MJAHR'.
wa_fcat-ref_tabname = 'MSEG'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BWART'.
wa_fcat-ref_fieldname = 'BWART'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Mvmt Type'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Document Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'BUDAT'.
wa_fcat-ref_fieldname = 'BUDAT'.
wa_fcat-ref_tabname = 'MKPF'.
wa_fcat-seltext_m = 'Posting Date'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Material No'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-ref_fieldname = 'MAKTX'.
wa_fcat-ref_tabname = 'MAKT'.
wa_fcat-seltext_m = 'Material Description'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFMG'.
wa_fcat-ref_fieldname = 'ERFMG'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'ERFME'.
wa_fcat-ref_fieldname = 'ERFME'.
wa_fcat-ref_tabname = 'MSEG'.
wa_fcat-seltext_m = 'Uom'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Supplying Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-seltext_m = 'S.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGORT'.
wa_fcat-seltext_m = 'Supplying St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE'.
wa_fcat-seltext_m = 'Su.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMWRK'.
wa_fcat-seltext_m = 'Receiving Plant'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'NAME2'.
wa_fcat-seltext_m = 'R.Plnt Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'UMLGO'.
wa_fcat-seltext_m = 'Receiving St.Loc'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-fieldname = 'LGOBE1'.
wa_fcat-seltext_m = 'Re.St.Loc Desc.'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM.                    " field_cat
*&      Form get_data
*       text
* --> p1        text
* <-- p2        text
FORM get_data .
SELECT a~mblnr a~zeile a~mjahr a~bwart a~matnr
            a~erfmg a~erfme a~werks a~lgort a~umwrk a~umlgo
            b~budat b~bldat
            INTO CORRESPONDING FIELDS OF TABLE it_mat
            FROM mseg AS a INNER JOIN mkpf AS b
            ON a~mblnr = b~mblnr
            AND a~mjahr = b~mjahr
            CLIENT SPECIFIED
           WHERE a~mandt EQ sy-mandt
             AND a~werks IN s_werks
             AND a~lgort IN s_lgort
             AND a~umwrk IN s_umwrk
             AND a~umlgo IN s_umlgo
             AND a~bwart IN s_bwart
             AND b~budat IN s_budat
             AND b~mjahr IN s_mjahr.
IF sy-subrc EQ 0.
    SELECT matnr maktx
     INTO TABLE it_makt FROM makt
     CLIENT SPECIFIED
     FOR ALL ENTRIES IN it_mat
      WHERE matnr = it_mat-matnr AND mandt EQ sy-mandt.
ENDIF.
SELECT werks name1
   INTO TABLE it_t001w FROM t001w
    CLIENT SPECIFIED
   WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE e000(zmss).
ENDIF.
SELECT lgobe INTO TABLE it_t001l FROM t001l
   CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc <> 0.
    MESSAGE e000(zmss).
ENDIF.
ENDFORM.                    " get_data
*&      Form process_data
*       text
* --> p1        text
* <-- p2        text
FORM process_data .
LOOP AT it_mat.
    ztabix = sy-tabix.
    READ TABLE it_makt WITH KEY matnr = it_mat-matnr.
    IF sy-subrc = 0.
      it_mat-maktx = it_makt-maktx.
    ENDIF.
    IF it_mat-bwart+2(1) = '2'.
      it_mat-erfmg = - ( it_mat-erfmg ).
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-werks.
    IF sy-subrc = 0.
      it_mat-name1 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001w WITH KEY werks = it_mat-umwrk.
    IF sy-subrc = 0.
      it_mat-name2 = it_t001w-name1.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-lgort.
    IF sy-subrc = 0.
      it_mat-lgobe = it_t001l-lgobe.
    ENDIF.
    READ TABLE it_t001l WITH KEY lgort = it_mat-umlgo.
    IF sy-subrc = 0.
      it_mat-lgobe1 = it_t001l-lgobe.
    ENDIF.
    MODIFY it_mat INDEX ztabix .
ENDLOOP.
ENDFORM.                    " process_data
*&      Form display_data
*       text
* --> p1        text
* <-- p2        text
FORM display_data .
REFRESH i_events.
i_events-form = 'TOP'.
i_events-name = 'TOP_OF_PAGE'.
APPEND i_events.
CLEAR i_events.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = SY-CPROG
*   I_CALLBACK_PF_STATUS_SET          = ' '
*   I_CALLBACK_USER_COMMAND           = ' '
    i_callback_top_of_page            = 'TOP'
*   i_callback_html_top_of_page       = 'TOP'
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
     i_background_id                   = 'ALV_BACKGROUND'
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
*   IS_LAYOUT                         = LS_LAYOUT
     it_fieldcat                       = it_fcat[]
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
     it_events                         = i_events[]
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_mat
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_data
*&      Form top
*       text
FORM top.
DATA : idate(10),
           idate1 TYPE sy-datum.
DATA : ls_line TYPE slis_listheader,
         i_listheader TYPE slis_t_listheader .
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = sy-repid.
APPEND ls_line TO i_listheader.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-info = 'MATERIAL DOCUMENT LIST'.
APPEND ls_line TO i_listheader.
CLEAR ls_line.
idate1 = sy-datum.
WRITE idate1 TO idate USING EDIT MASK '__/__/____'.
ls_line-typ = 'S'.
ls_line-info = idate.
APPEND ls_line TO i_listheader.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_listheader
      i_logo             = 'LOGO'.
*   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP

Tips for best batt life?

I've got a new MacBook and want to avoid whatever mistakes I've made in the past to deplete my battery life long-term. I've read Apple's page on keeping the battery in good shape, but is it best to let the battery FULLY discharge and FULLY charge (top it off) all the time? And is it bad to keep it plugged in while using, even if it's got a full charge already? What about keeping it plugged in when not in use?
Any tips from experienced Mac people (I'm so glad to join your ranks) would be appreciated.
Elise

HuntedMoose wrote:
Meaning that it is not bad for the battery to be charged all the time (when the AC is plugged?)
If you use your battery even for 10 minutes you should charge it when you can. Li-ion Batteries work best with small charges over big ones. Do not use your battery then use it again and again till the battery gets low enough to shut off. I am not talking about where you have no choice. I am saying don't deplete your battery on purpose before you charge.
A charge cycle is a full discharge and full charge. It is best if done in small doses.
+Example. You use 25% of the battery and then recharge. You have used 1/4th of a cycle. Doing this 4 times an you have a full cycle. This is better for the chemistry that using it for 25% and then letting it sit till the next day and using it for the rest of the use then charging it.+
Below is what I like to give new users for battery care. I use my battery in this way and after six months have 14 cycles on this battery. I get between 3 and 4 hours of use with it and have everything turned on.
It is OK to leave your battery hooked to the charger most of the time. Most of the time I only unhook mine from the charger is when I calibrate. Have you calibrated your battery yet? You should calibrate every two months or so to keep the battery fully functioning. If you use your MacBook infrequently, it’s best to re-calibrate the battery at least once a month.
The following links have good information about the MacBook and the care of it's battery.
Apple: Tips for maximizing your Notebook battery charge
Apple MacBook and MacBook Pro: Reduces processor speed when battery is removed while operating from an A/C adaptor
Apple portable computer's battery does not show a full charge in Mac OS X
Look here and here for some good tips about battery care.
Apple MacBook: How to remove or install the battery
Apple: Determining Battery Cycle Count
Apple: Use and cleaning of MagSafe power connector

Any tips for novel writing in Pages?

I am determined to finish my next novel in Pages. I can't take the weight of Word any more. Does anyone have any tips for using Pages in this way, producing a manuscript that will probably run to 130k words in the end? I have tried everything in this field on OS X, from Mellel to Nisus, Ulysses and Copywrite, and I think Pages suits me best.
What I have discovered so far...
Good points
Reliability
Ease of use
Speed
The fantastic search and I think unique show search feature which is now my primary way of navigating the manuscript.
Could be better
No keyboard shortcuts for styles
It's simpler to number chapters manually than mess around with lists
The word count is awkward to get at
No outlining or easy navigation by chapters
Occasionally I get red underline spelling errors for words that are spelled correctly. This goes away if I right click and may be due to hyphenation though that is turned off for the document.
G5 dual Mac OS X (10.4.2)

Bodsham,
I started my novel with Nisus, switched to CopyWrite, then wrote the bulk of it with Pages. All in all, using Pages was a terrific experience. But the use of a word processor for a novelist is a very, very personal and subjective thing.
Things a novelist might like about Pages
- What you see on the screen is beautiful -- Pages renders text extremely well
- The system for defining styles is excellent. When I first fired up Pages 1.0, it took me 15 minutes to make a complete manuscript template, including headers
- It's very stable. Unlike Nisus, which was a nightmare (adding blank pages and weird indents all through the document), Pages behaves itself very well
- Plays nice with Word. I'm able to open and export Word docs very successfully
- Brilliant search feature; provides a list of word occurances, then lets you click on them
- Bookmark feature lets you easily jump from chapter to chapter
Things a novelist might not like about Pages
- A few people report a typing lag. If you experience it, it's a significant problem
- Bookmarks, while excellent, won't permanently sort alphabetically -- only numerically. Every time I open my document, my bookmarked list of chapters is sorted incorrectly. Not a big deal; just a minor annoyance
- Very mouse-intensive program. Not a huge issue for a novelist since we mostly just hit a carriage return; not a lot of styles in a text-based manuscript
- Gobbles up a lot of screen real estate. In order to have various inspectors and panes open, it's good to have a larger monitor, otherwise you'll find things sitting on top of your text
I'm sure there are many more strengths and weaknesses, but that'll get you started. By the way, you can download Devon Technologies' excellent and free Word Services that'll add a lot of very useful features (including word count) to your services menu. Get it at http://www.devon-technologies.com/download/index.html
-Dennis

CE Declaration of Conformity for LENOVO KEYBOARD ThinkPad X1

I need a CE Declaration of Conformity for "LENOVO KEYBOARD ThinkPad X1 - 04W2757".
Can somebody tell me where I can find one?

Hello Ceb,
Thanks for your messages.
SSD is listed as INTEL SSDSA2BW160G3L.
I might try to download latest frimware directly form Intel support pages, but isn't Lenovo developing their own custom SSD firmwares ?
According to System Update and Lenovo support drivers page, all drivers are up to date.
The only thing strange to me is that neither of them are proposing Intel Rapid Storage Technology drivers...
But as this computer is the one of a top management user, I just cannot afford to try to update its SSD drive firmware, risking to corrupt some precious data.

Configure wireless for Lenovo X60 on Fedora 8, anyone?

Has anyone had any luck getting the built-in wireless card to work for lenovo x60 on Fedora?
Any tip is appreciated.
-tito

Hi,
thanks for the quick reply.
there is a wireless router at my house where it communicates with my PC via the wireless connection. so yes, the wireless capability of my router works.
I have no idea which card is built-in but the Lenovo X60 is of type 1706 and 85U mode. How can you find out for sure from a command or if that is even possible?
you suggested to create and alias in /etc/modprobe.conf for this wireless device once the driver has been installed as follows:
"alias ath0 ath_pci"
do you mean eth0? or ath0 is a new device name that i m not aware of. to my surprise, the ethernet is labeled as eth1.
I'll try to yum install the driver tonight when i get home.
BTW, I am having a similar problem with an IBM T42 running fedora 7. i don't normally use wireless on this laptop because the wireless router (at work) can be flaky at times but it would be nice to install/enable wireless card for it in case i need to bring it home to do some work. I could very well use the wired connection at home with this T42 as well but it would be nice to use the wireless connection instead.
Any hint/tip would be much appreciated.
here is the current ifconfig and modprobe.conf of the T42
$ ifconfig 0a
0a: error fetching interface information: Device not found
[qnguyen@qlaptop Download]$ ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:0D:60:74:3E:0E
          inet addr:64.89.226.13 Bcast:64.89.226.255 Mask:255.255.255.0
          inet6 addr: fe80::20d:60ff:fe74:3e0e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:89029 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48293 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:57481828 (54.8 MiB) TX bytes:7708199 (7.3 MiB)
          Base address:0x8000 Memory:c0220000-c0240000
eth1      Link encap:Ethernet HWaddr 00:0E:35:1A5:15
          BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:1331960 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32805 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
          Interrupt:11 Base address:0x2000 Memory:c0214000-c0214fff
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:6299 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6299 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:37966927 (36.2 MiB) TX bytes:37966927 (36.2 MiB)
$ more /etc/modprobe.conf
alias eth0 e1000
alias scsi_hostadapter ata_piix
alias eth1 ipw2200
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
Notice, it seems to me that driver has already been loaded for the wireless eth1 but it doesn't pick up the signal. eth0 is the hard wire. perhaps, there is something i need to tweak?

X-series tablets: Felt tips for the pen?

Has anybody tried the hard felt tips for the Wacom pen to prevent scratching the screen?
Or! Perhaps found another alternative nib that doesn't scratch the screen?
I just got my screen replaced (bright dots on it...), and it just looks too good to have a protector on. I used to have a Photodon protector, but ended up scratching (the keyboard and I...) it in the long run.
Cheers,
.k
http://vanhavirta.fi/

DUTCHvanAtlanta wrote:
Shipping for my order has just been delayed for a week and a half. If this happens again, it may become necessary to cancel this thing.
I hope Lenovo computers are better than their order system. After receiving notice that the ship date had been postponed from 6 Jan to 17 Jan, it shipped on 8 Jan. I hope they have their manufacturing act together better than how they handle orders. Their order system seems like it's a http://en.wikipedia.org/wiki/Chinese_fire_drill being directed by the Keystone Kops.
Moderator edit: Changed year in subject to 2012.

Since backing up my iPad air and installing IOS 8.1.2 the screen doesn't move between landscape or portrait when I turn it. Any tips for getting it to do so?

Since backing up my iPad air and installing IOS 8.1.2 the screen only shows the portrait view and won't change to landscape view when I turn the device. Any tips for getting back both views?

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that didn't work, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

Top 10 Retain tips for Lenovo XClarity Administrator

Similar Messages

Maybe you are looking for