Top 4 basic issues that are encountered in SCOM 2012 and SCCM 2012

HI,
I need to give a presentation on the basic issues that are encountered in SCOM 2012 and SCCm 2012.
Can anyone help me out with this?
Thanks in advance
Rohith Kumar

Hi,
I am not familiar with SCCM, so I will give some issue I encounterred in SCOM:
1. Not monitored and grey agent, here is an article for your reference:
http://technet.microsoft.com/en-us/library/hh212723.aspx
2. Failed to discover and install agents, this may caused by the action account or install account does not have proper permissions to install the agents. Some time maybe the discovery rule is not enabled.
3. Failed to import Management Pack, this may caused by references MPs are not imported to the management group, or sometime the proper referenced MPs are imported, but there may be incorrect typing in the XML file which defines the management pack.
4. Runas account and Action account fail. If you change password for action account, you may also need to change the password everywhere the account is used in SCOM. For run as account, if the account does not have enough right to run some tasks, we may
encounter errors. You may refer to the below link which take SQL mp for example:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

SCCM report data are missing inside report since Update SCCM 2012 to R2 Cu1

Hi All,
I encountered an issue regarding certains SCCM reports after migrating to SCCM R2 CU1.
After this upgrade, I've already encountered some issues on differents reports .. reports where we need to select a collection or patches or computers from a drop list (all theses drop list were empty).
I resolved these issues by adding the "read" security permission in the security role dedicated to our Support Team. (Read permission is now applied on Collections, Packages ect...)
This sort of report works well now.
But this same Team show me another issue where I did not find any resolution.
In the categorie called "Hardware - General", we have a report named "Computer information for a specific computer" where, as you know, we normally could find some informations regarding a computer.
In fact, the only informations which are visible through this report are the NetbiosName,Username, Domain User & computer and IP adress.
All others informations are not displayed.
If I use this report with a user who has admin rights in SCCM (which is not the fact with my support team of course) ...all informations are displayed normally.
It seems that it looks like the first read rights issue that I encountered at the beginning, but I did not find where could be the cause of this issue
Does anyone has already seen this sort of issue ?

In CM12R2 RBA is now enabled for report. So this tell me that you have NOT grant the support team access to the data and therefore this is normal.
There is a quick fix for this see Brian post.
http://www.mnscug.org/blogs/brian-mason/162-report-user-role
http://www.enhansoft.com/

Are there any differences between Server 2012 and Server 2012 R2 that might impact TFS or SQL server required for TFS?

Hi,
In the interest of just getting started and learning the basics of setting up TFS, I previously setup an IDE using a large workstation running Windows 8. I set up the required servers for TFS using VM's through Hyper-V. I am now transferring
everything to a new and separate physical server.
My question stems from a problem I had when I originally setup the TFS system the 1st time. I couldn't get SQL server to work using the Server 2012 R2 download from the subscription center. When I used Server 2012, it worked, so I proceeded that
way just to get going.
So now I'm setting things up anew on a new physical box, I want to ask up front, is there some difference in the R2 version that causes problems with either TFS or SQL server, or was there likely some oversight on my part when I did things the 1st time?
As an addendum to my question, I always assumed R2 merely means the Server software has progressed to a refined state and is ready for wide distribution and easy setup. I assumed that there are no differences between the Standard version and the R2
version. Is that understanding correct?
Thanks.

Hi Daniel,
Thanks for your response. That's a great link. I don't recall seeing a page that is so clear and easy to read back when I was doing this the 1st time, but I probably just missed it. That helps.
I am/was using TFS2013 and VS2013. As I recall, my problem was getting SQL Server to work, but I thought asking this question on this forum was wiser because I figured everyone using TFS would be well familiar with these issues.
At any rate, it seems as though TFS2013 is fine with Server 2012 standard or R2.
I was using SQL Server 2012, and it also seems as though it works on R2:
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Anyway, thanks for your support. I'll be trying this again and we'll see.

There are some websites that are available on my desktop and smartphone, but not on my laptop. How do I fix this?

I can access almost all web sites on my desktop, laptop, and smartphone, but there are a few that will load on the desktop and smartphone, but will not load on my laptop, with either Firefox or IE. There is no error message, and the animated icon that should show that the site is loading doesn't move at all. This is very frustrating, because it sometimes means that I miss important webinars, etc. Some of the sites I can't load are not long links, just the basic URL.
My internet service has been unable to help, and Norton tech support tried but also was unable to resolve the problem.
I've tried resetting Firefox to the default, but it didn't help. Note again that the web sites that are a problem will not load in either Firefox or IE on the laptop, but do load properly on the desktop and smartphone.

See also:
*http://kb.mozillazine.org/Error_loading_websites
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Can SCCM Poll a subnet to determine PC's that are NOT in any collections in SCCM?

What I would like to know is if SCCM can scan a subnet for PC's that it does not have in any of its collections. I would say we have 50 PC's that are reporting into SCCM but another 50 that are NOT reporting to SCCM. I want to get SCCM to find the latter
50 PC's scan them and add them to a device collection. Is this possible to do without manually entering all 50 PC's?
Also if a device collection was deleted will the SCCM server be able to still find the clients that did report to it or would the clients have to manually be re added to the SCCM server?
Sorry if I am lacking any detail I am very new to this venue and I can provide more information when I receive some feedback.
Thank you in advance
Bryan

ConfigMgr cannot and does not "scan" subnets. There's AD discovery which can add computer (or user) resources to the CM database.
Collections have nothing to do with all that. They are just there for grouping resources (in order to deploy software to them etc). Just deleting a collection will not automatically remove the resources that are member of it (unless you select to do so) - so
it does not stop the client agents to function.
Torsten Meringer | http://www.mssccmfaq.de

How come the same apps that are available for my iPhone and my iPad are not the same as the apps in the app store on my mac

I want some of the same apps available on my iphone and ipad2 to be available on my macbook pro app store and to be able to link them through icloud. Is this not possible? If not, why not?

The Mac uses Mac OS X and iDevices use iOS. These are two different operating systems and the apps must be written for each operating system specifically, even when the apps go by the same name, such as the iWork apps, they are two ifferent versions of the same app for the two different platforms.
So, as an example, Safari has been written for three different operating systems, Mac OS X, iOS and Windows. And the Safari apps, as similar as they are visually, are not interchangeable for the different platforms.

Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

Hi All
I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have SMSPXE.log since it never gets to that point and the distmgr.log never reaches
that point either. I've tried
uncheck pxe boot option - restart - re-check
uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
the above with installing wds unconfigured
Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
WDS PXE Secondary Site Issues but mine is on the Primary Site.
ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

HI again, sorry for the late reply.
By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
The Account used is a local admin and the distribution point is located on the primary site server.
EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
On error (source: MsiInstaller) below:
Product Application Web Service -- Internal Error 25001. 80070490
I havent mentioned it earlier, but the Server OS is Server 2012.
I hope this might help you help me :)

Issue with KB2830477 and SCCM 2012 Remote Control Viewer

I've just rolled out Feb '13 updates for Windows 7. The update KB2830477 appears to cause
an issue when closing a remote control session using SCCM Remote Control Viewer
(2012).
The following error appears:
"ConfigMgr Remote Control Viewer has Stopped Working"
"A Problem Caused the Program to Stop Workingcorrectly. Please Close the
Program"
In the Event log, the following event is triggered in Windows Logs>Application.
Faulting application name: CmRcViewer.exe, version: 5.0.7711.0, time stamp: 0x4f42f979
Faulting module name: msxml6.dll, version: 6.30.7601.17988, time stamp: 0x5091ff29
Exception code: 0xc0000005
Fault offset: 0x00056368
Faulting process id: 0x24c0
Faulting application start time: 0x01cf2d7bf99dc96d
Faulting application path: C:\Program Files\Microsoft Configuration
Manager\RemoteControlViewer\CmRcViewer.exe
Faulting module path: C:\Windows\System32\msxml6.dll
This is with an EventID: 1000. Removing the update resolves the issue.
Report Id:
36c3642d-9970-11e3-89bd-028037ec0200

Hi,
I recommend you check the log file CMRcViewer.log:
It records details about the activity of the remote control viewer.
Located in the %temp% folder on the computer running the remote control viewer.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issue setting up PXE Enabled Distribution point for SCCM 2012.

I'm trying to set up SCCM 2012 in my Lab Enviroment in order to plan for implmentation to production.
I have installed and Configure one Primary site which has a working DP role width PXE /WDS.
And i am able to successfully do and OS Deployment.
I want to setup an additional Distribution point with PXE, to simulate a branch Office.
Installation of the second Distribution point looks to be succesfull, but i'm not able to boot on PXE.
It allways gives me the error messeage "The Windows Boot Configuration Data file does not contain a vaild OS entry
The same error messeage is given before i distributed the boot images (both x86 and x64)
So my thougts are that he WDS dosn't find the bootable images somehow.
I can see that the images are added to the RemoteInstall\SMSImages directory, but i also see the following in smsdpprov.log
[83C][Mon 04/23/2012 15:43:26]:Conent 'PS100004.7' for package 'PS100004' has been added to content library successfully
[83C][Mon 04/23/2012 15:43:26]:Expanding \\?\E:\SCCMContentLib\FileLib\4ABE\4ABEBA3BB557A810CBCC8148BC70FE01349142EB1BCF1C1154216B77E3E22495 from package PS100004
[83C][Mon 04/23/2012 15:43:26]:Finding Wimgapi.Dll
[83C][Mon 04/23/2012 15:43:26]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:43:26]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:43:26]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:43:26]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:43:26]:Found C:\Windows\system32\wimgapi.dll
[83C][Mon 04/23/2012 15:43:26]:Expanding PS100004 to E:\RemoteInstall\SMSImages
[83C][Mon 04/23/2012 15:44:48]:Registry key creation successfull
[83C][Mon 04/23/2012 15:44:48]:Registry key creation successfull
[83C][Mon 04/23/2012 15:44:49]:Registry key creation successfull
[83C][Mon 04/23/2012 15:45:23]:Conent 'PS100001.5' for package 'PS100001' has been added to content library successfully
[83C][Mon 04/23/2012 15:45:23]:Expanding \\?\E:\SCCMContentLib\FileLib\5EFD\5EFD89A7C52739DC815393C586861AFB6664FD4F28726758D6A151722D160031 from package PS100001
[83C][Mon 04/23/2012 15:45:23]:Finding Wimgapi.Dll
[83C][Mon 04/23/2012 15:45:23]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:45:23]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:45:23]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:45:23]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:45:23]:Found C:\Windows\system32\wimgapi.dll
[83C][Mon 04/23/2012 15:45:23]:Expanding PS100001 to E:\RemoteInstall\SMSImages
Server is a clean installed Windows 2008 R2, only added to domain, added the primary SCCM server account as local Admin, added WDS Role and configured RemoteFolder before adding DP role from the SCCM Console. (So SCCM has installed and Configured IIS)

Looks like i have found the answer at least i have got it to work.
Once i install .Net Framework 3.5.1 Feature on the server, i was able to boot succesfully into SCCM Task Sequence Wizard.
I also was successfull installing the the PXE DP role from the console succesfully without having to install WDS first.
So i guess that .Net Framework 3.5.1 is required for PXE DP role on Windows 2008 R2. (but i can't see that mentioned anywhere here http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SiteSystemRolePrereqs)

Driver issues with HP Z440 and SCCM 2012 R2?

Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

The problem cannot be replicated. My Z440 has an 1TB WD SATA drive attached to port 0 of sSATA 6 Gb/s. Download and install the ´Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update´: https://www.microsoft.com/en-US/download/details.aspx?id=39982 Download and extract the ´Intel Rapid Storage Technology Enterprise Utility and Driver for Microsoft Windows (64-bit Editions)´, 4.1.0.1046 B(12 Nov 2014), sp69762.exe:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978829&swItemId=wk_139802_1&swEnvOid=4059 Copy the IRST driver “64bit_RSTe_4.1.0.1046_F6_Drivers” abd sub folders into “C:\z440_x64\64bit_RSTe_4.1.0.1046_F6_Drivers” Open the ´Deployment and Imaging Tools Environment´ command window as administrator and create bootable USB media:copype amd64 c:\winpe_x64 Dism /Mount-image /ImageFile:c:\winpe_x64\media\sources\boot.wim /index:1 /MountDir:c:\winpe_x64\mountDism /Add-Driver /image:C:\winpe_x64\mount /driver:C:\z440_x64 /recurseDism /Get-Drivers /image:C:\winpe_x64\mountdism /unmount-wim /Mountdir:c:\winpe_x64\mount /commitMakeWinPEMedia /UFD c:\winpe_x64 d: Boot Z440 to F10 Setup.Set Factory Defaults and exit.Boot to WinPE media created above.I also tested the wim file as the boot image in SCCM 2012. The hard drive is detected correctly.

Hi I want all the issues that are related to FI , HR & BPS

Hi friends,
I want all the issues related to FI, HR & BPS(SEM)
I will assign good points
Thanks in advance,
Ravi Alakuntla.

Hi,
Sine the records are posted to FI/CO, the records in CATSDB will be with the status '30' appropved. Now if you want to change the hours recorded, change the same, so that the status changes as 'Change after approval' and release the same and transfer it to FI/CO again.
The records in the FI/CO interface tables will be overwritten.
Thanks & Regards, Swapnil Mishra

Does not play correct ringtones that are set for the Caller and Rings when no one is calling

I have had my Droid Global for around and three months and from the beginning I have had issues with the ringtones ringing when a certain person calls me. Instead, it seems, it will play the rigntone that is applied to the last person that called me instead of the person who is actually calling me. This can be somewhat frustrating and kind of defeats the purpose of applying rigntones to people in the first place.
Also, just recently my phone has decided to ring all by itself...without any incoming calls, notifications...nothing. It does a very quiet ring that sounds similar to that of a house telephone or landline phone. It does not stop unless someone calls me or if I take my battery out and reset my whole phone. My phone has only done this twice and unfortunately it once happened in one of my college classes and I couldn't get it to stop.
Please help me...I don't know what I can do to fix this!!!

Hi Cargo23,
I am sorry to hear you're having issues with your phone not ringing. In what zip code were you located when this issue occurred? Are you using your vehicle's bluetooth when this happens? Please try a soft reset to refresh your connections http://vz.to/1nLXk5g.
Thank you!
EdW_VZW
Follow us on twitter @VZWSupport

How to rename two external hdd's, that are exactly the same brand and model, in order to distinguish?

Hello again.
First of all excuse me if I mistype anything or fail to use some terms correctly. English is not my mother tongue and I am kind of new to MacBooks.
Here's my problem.
I've got a macbook pro (yosemite 10.10.1, retina, 15", late 2013, 8gb memory, 250gb ssd), and I am using an external hard drive which I found to be quite good for what I wanted (in case it matters it's the lacie porsche design 2TB USB3).
I wanted one more external hard drive, and since I was satisfied with the one I had bought before, I decided to go for that one again.
Now the thing is that, when I go to finder I see 2 disks with the same name (and their "share" partitions) and I don't know which is which.
I'll try to post a screenshot that might clear things out.
What I would like to do would be to somehow rename the second disk so it appears in the finder as (for example) Lacie1 and Lacie Share1.
Apparently, the system kinda thinks in a similar way as I do.
As you can see below, it has done exactly what I want to do in Lacie's manager (or however it's called), but that does not appear in finder.
(some words are in Greek, but you'll get the point)
So, is there any way I can do something that will make the disks appear like that in finder so I can differentiate among them?
Any help would be greatly appreciated.

Connect the external HDD to the MBP. Click in the title below the icon two times. It should then allow you to change the name.
See this example:
Ciao.

Where can I find website templates that are editable by both Mac and PC

I need advice as to where I can get a website template(s) that can be edited with BOTH Mac and PC. (I am on a Mac, the other person working on this same project is using a PC.) I am proficient in Adobe Photoshop, Illustrator, and InDesign for Print, but am a novice at websites. Where can I go to, to get a website template that both of us can edit simultaneously?

I am proficient in Adobe Photoshop, Illustrator, and InDesign for Print, but am a novice at websites.
If you decide to use Dreamweaver, each of you will need a licensed copy for your particular operating system. HTML & CSS coding skills are essential.
Another option is to use WordPress. Neither of you will need software to edit the site because WP is installed directly on your remote server. All you need is an internet connection and a browser to log-in to your site.
http://wordpress.org/
Many commercial and free Themes (templates) are available for WordPress.
http://wordpress.org/extend/themes/
A Google search for WordPress Themes will reveal hundreds more...
Nancy O.

Top 4 basic issues that are encountered in SCOM 2012 and SCCM 2012

Similar Messages

Maybe you are looking for