Top bar of documents behind control panel bar

My documents always open with the top bar behind the control panel and I'm constantly having to go outside of InDesign to move it down and resize the window.  Is there any way to prevent the document, mainly the top bar where one moves the document, from sliding behind the control panel bar.  Or can the control panel be put on the side?   Thanks  michelle

You can use the Application frame feature. You'll find it under the Window menu, close to the bottom. If your an old Mac user and you hate that (many do) it's easy to reset the document by using the arrange documents icon in the applications bar. choose the option to consolidate All.

Similar Messages

  • The Control Panel (top bar) no longer shows the location or size of an object when I select an object using the black arrow.

    I'm only able to see/adjust the location or size of the object by opening the Transform panel. 
    This is what I used to see:
    Now my Control panel looks like this where the above information used to be when an object was selected using the black arrow:

    tracyelaine,
    It may be time for the list (you may skip 5) in this case).
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html
    External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • How do i get rid of WEB BAR. went to control panel...did not work

    I have web bar at the top of the screen. I have uninstalled it in the control panel but it still is there and i don't know how to get rid of it and it is driving me crazy.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • No tool bar or control panel?

    I just installed indesign cs5 for the second time because i cant see a tool bar or control panel. I have a presentation to do 2moro and im stressing hard. Anyone know how to fix this? cheers

    os is mac os x snow leopard. its in normal mode. all i can see is the a4 doc on a white background with the rulers on the left and the top. my bad i can see the control panel just not the tool panel.

  • I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.

    I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.
    I wish I could share the two screen shots I took, but this question site doesn't have the option, so I guess I'll describe where Bing is showing up.
    In the left hand of my browser, just to the right of the back and forward arrows, there is speech bubble with a black eye ball or something. I found out it's Bing-related by clicking on it. There is no option to remove it with either left or right clicking on it.
    Also, in the right hand corner of my browser, at the very end of all my tabs, there is a white rectangular box with an orange "b" and a magnifying glass symbol. It will not respond to anything I try to do to it either, but if clicked it opens a new tab with a Bing search dialogue box.
    Finally, any new tab I open automatically opens to the Bing search dialogue box (versus Google).
    I need to get specific, step-by-step instructions for removing this Bing stuff from my computer. As I said, I have already gone through all steps outlined in the article I mentioned above as well as not been able to locate Bing in my control panel.
    Please help. I'm certain others are having this same issue. I use Windows 7 and Firefox. Thanks.

    Apologies for the formatting there. No idea what went wrong...

  • I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

    I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes  how do I make the layers and tool bars bigger?  Please help@

    Windows will scale applications display or windows will not scale application display depending on how the application is coded.  Photoshop is coded in a way that its display is not scaled by windows.  Photoshop knows about your displays high pixel count not its resolution  so it uses its pixels  however it does not scale its UI to make it usable on your display.  Other application let Windows  scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels.  The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays  2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
    The reg update  and external manifest file  effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size  in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution.  Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768.  Photoshop UI would not fit on the Surface Pro 3 display..
    Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display  3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

  • Menu Bar Icons no longer showing, not able to switch on in control panel

    I had sleep problems with my MBP (http://discussions.apple.com/thread.jspa?threadID=2449728&tstart=0) and as such I did a combo update as this could possibly solve it.
    However, now all the control panel icons in the menu bar have gone (like the clock, network, airport, etc) and I am not able to switch them on in the relevant control panels. If I hit the tick box 'show in menu bar' of any control panel it ticks it for a split second and immediately removes the tick.
    I am able to turn it on via /System/Library/CoreServices/Menu Extras/, however after a restart all is back to previous state, no icons in menu bar.
    I redid the combo update > no success.
    any ideas?

    I did that and all is well in the other account.
    in a moment of inspiration, I reinstalled the
    Home/Library/Preferences/com.apple.systemuiserver.plist
    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    from a backup and this solved the Menu Bar issue.
    Thanks for thinking with me.

  • The bar at the top of each document?

    What is that bar at the top of each document?
    Is there any way to put something in the bar on the first page and not have it appear in the bar on the second page?
    It's very annoying to have that happen all the time.

    Clear as mud.
    What bar in what document?
    If I am guessing right, you are referring to the Header?
    If so:
    +Inspector > Layout (2nd tab) > Section > Configuration > check First page is different+
    Download the Pages09_UserGuide.pdf from under the Help menu to read how it all works.

  • How do I prevent scroll bar use from disabling front panel updates?

    I have two top-level VIs running simultaneously using different execution systems.  The first VI has a list box scroll bar.  When the scroll bar is used by the operator, updates to the second VI front panel are temporarily blocked.  This is due to the single user interface thread shared by both VIs.  I there anyway to allow the second VI to update its front panel while the first VI is bound to its scroll bar?

    Hi,
    Your problem seems to be a bit more complex. I created two vi's, one with a simple loop, the other with a list box (both running in different execution systems). The first isn't noticeably affected by moving the listbox' scrollbar.
    It there an increase in processor load when you move the scrollbar? That could stop the other vi from updating. Perhaps you can isolate the problem (remove all irrelevant code) and post the remaining vi's?
    Regards,
    Wiebe.
    "wwwbrown" <[email protected]> wrote in message news:[email protected]..
    I have two top-level VIs running simultaneously using different execution systems.&nbsp;&nbsp;The first VI&nbsp;has a list box scroll bar.&nbsp; When the scroll bar is used by the operator, updates to the second VI front panel are temporarily&nbsp;blocked.&nbsp; This is due to&nbsp;the single user interface thread shared by both VIs.&nbsp; I there anyway to&nbsp;allow the second VI to update its front panel while the first VI is bound&nbsp;to its scroll bar?

  • How to put scrol bar in table viw control in module pool programming

    how to put scrool bar in table-view control in module pool programming

    Hi Rani,
       You need not insert Scrollbar in the table control, it appears automcatically once the amount of data vertical or horizontal limit of table control.
    Regards,
    Sathish
    Note : Reward useful Answers

  • My emails are appearing along the top of the page in the tool bar area? how do i get rid of this and back to the regular email page

    I opened my Mozilla yesterday and noticed my email page format was different then after a second, I noticed all my emails were now appearing along the top of the page in the tool bar area below "Fine Edit View Go ...etc" I'm not sure what happened. PLEASE help me I'm sure it's probably an easy fix, however I don't know how to fix it :)~ Also they are oldest email first, and since I normally save them for 45 days before deleting, I cant seem to get to the most recent email first. Ugh.
    Truly appreciate your help.

    This is what happens when you continually open messages in tabs but never close them. Pretty soon all you have are message tabs showing and you have pushed the Inbox off the screen.
    Get in the habit of closing message tabs after you read them.
    To get out of your situation now, right click one of the tabs and select Close Other Tabs. Then use the x to close the last one.

  • Return Links at top of Report?  Legend Labels on Bar Chart Rollovers?

    Hi,
    I have two questions.
    1. Is there a way to easily put the 'Return' links at the top of all reports? i.e. is there a template I can edit to do this to all my reports? I have hundreds of reports and changing them all by hand by putting a static text with HTML isn't really an option for me.
    2. Is there a way to show the Legend value when you hover over a Bar on a Bar Chart. I'm pretty sure pie charts do this, but in my Bar Chart, hovering over the individual bars only shows the value. I would like for it to also show which legend item it is when a user hovers over.
    Thanks,
    Kevin

    Kevin,
    I was looking into the issue. I can confirm that the scid code that's generated is dynamic.
    I also looked into the return link - the code is the following (you already know this).
    td class="ResultLinksCell"><a href="javascript:void(null)" onclick="return ViewBack('d:dashboard~p:9md8uku78u84kdge~r:kug9avdjlblr24fq','DrillBack','1pnm8a1lmln3ml08v6lil3d8gi');" title="Return to the previous page" name="SectionElements">Return</a</tdI checked several JS files in OracleBI\web\app\res\b_mozilla folder - tableview.js, viewhelper.js- although I found the function responsible for Return link (viewback) - I couldn't find the xml where you'd need to put that link in front of the following code - div id="idResultsTableParent"><table id="saw_146_3" class="ResultsTable" I suggest you search for the place in xml where it's generating table view and put the return link on top of the table.
    Edited by: wildmight on Apr 14, 2009 8:04 AM

  • How to Enable to vertical scroll bar in a table control

    Hi,
    I have created a table control with a wizard and later did some modifications on it. Problem I have now is that the vertical scroll bar is disabled on this table control. The end user wants to enter as many rows as possible, however as the scroll bar is disabled, he is not able to add the rows at the end (of the visible table control area).
    How do I enable the vertical scroll bar of the table control?
    Please help.
    Thanks,
    Vishal.

    Hello Vishal,
    In PBO.
    Create a Module and in the module increment the value of tbcl-lines.
    ex:
    Data : L type i.
    IN PBO.
    MODULE vertical_scroll_bar.
    MODULE vertical_scroll_bar.
    DESCRIBE TABLE itab lines L.
    <table control name>-lines = L + 10.
    ENDMODULE.
    Hope this solves your issue.
    Cheers,
    Suvendu

  • How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    Hi TheGuru146,
    It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    -Jason

Maybe you are looking for