Top/Bottom reports in Hyperion Reports?

Hi, I'm trying to produce a top 100 customers report using Hyperion Reports. Is there a way to do this? I found the RANK function, but that just returns a value--it doesn't filter based on data values. The only way I can find to do it is to add a formula column with the RANK function, then suppress any rows where that column's value is greater than 100. A bit of an awkward workaround, it seems. Maybe I'm just missing something, but it seems that given how easy it is to do this in Query Designer, report scripts, and Analyzer, that it would be easy in Reports, as well. Thanks, Jared

Gary, Thanks for the quick reply. But is it just me, or does it seem somewhat lame that there's not a built-in functionality for top/bottom reports? Or could it be that that functionality falls more into the Analysis category than the basic reporting category, and that's why Analyzer has it and HR doesn't? Jared

Similar Messages

Convert Hyp Enterprise reports to Hyperion Reports 2.5

Can you convert reports created with Hyperion Enterprise 5.1 to Hyperion Reports 2.5?James 214-285-2221

If you are referring to Hyperion Enterprise Reporting, the answer is no. The reports need to be rebuilt in Hyperion Reports

Top 10 Report Hyperion Reports

I couldn't find anything in the user's guide that walked me through creating a top 10 report in Hyperion reports. Are there multiple steps involved? If so, can you explain what they are? I'm hoping to create reports that will comprise not only top 10, but top 15, top 30, etc. Any help would be appreciated.

Unfortunately you are going to find this difficult. I was very disappointed in Hyperion's lack of functionality in Hyperion Reports when trying to do stuff like this. It's not a great report tool. You can do as Jared mentioned by using the Rank and suppress. the problem you start to run into is when you want to have sub totals. Chances are if you have a top 10, you want a line at the bottom that shows the sum of those ten. This starts to become difficult since you cannot control the order of operations in Hyperion Reports. You wind up having the sum performed prior to the suppression which gives you a useless result that sums all rows, not just the top 10. There are some work-arounds but they complicate the design and wind up limiting the report in other ways.

Hyperion Reports 2.6 updating substituion variables in a prompt

I'm running into a problem where I update a substitution variable on my Essbase server and then go to pull a report in Hyperion Reports v2.6.The report is set up to prompt the user to choose a member from the Time dimension, I have the default set to use the substitution variable 'cur_week'.The problem is when I update the variable on Essbase and pull the report, the report defaults to the old variable value. The only way I can get it to display the new value is to restart the Report Server.Has anyone experienced this? Do you know of a way to work around this?Thanks in advance

Decided to go with a batch script to restart the service on Report Server. Combined with a MaxL script to update the subvariables. Run both back to back and it seems to work.Not the ideal solution, but as long as I don't kick off while a report is running, it seems like it will work.

Hyperion Reports 7.25 Report Runs 10 - 20 Times Slower in FR 11.1.1.3

I exported a Report from Hyperion Reports V7.2.5 and Imported it into Financial Reporting V11.1.1.3 via Workspace. When I run the report in Financial Reporting Studio 11.1.1.3 or Workspace 11.1.1.3 it is 10 to 20 times slower.
Note, no changes have been made to the Report structure or the structure of the Essbase database that is being used as a datasource.
However, the Essbase Version is now 11.1.1.3. It was 7. Also, the server hosting the Financial Reporting 11.1.1.3 application is a VMWare Server - the server hosting Hyperion Reports V7.2.5 was a physical server not VMWare.
The only thing I did notice that was different in the report is when you highlight the entire grid and right-click to view Data Optimization Settings - there is an option in 11.1.1.3 that says "Essbase Queries use MDX" "Combined Queries with Member". This doesn't exist in Hyperion Reports V7.2.5.
Has anyone experience a simlar issue with this extreme performance degradation? I am using more robust servers with faster cpu's and more memory.
I did play around with the tcp/ip settings as recommended in a version 9.x support document, but this did nothing.

Thanks for replying Natesh.
Unfortunately I don't have a physical server to play around with. This was one of my concerns with using VMWare.
I didn't make any product configurations for Hyperion Reports V7.2.5. The only configurations I made were for tcp/ip settings.
I did try to run a V 7.2.5 report against Essbase 11 and it ran just as fast as it did against Essbase 7. This definitely leads me to believe the slower performance is related to Financial Reporting V11.1.1.3 or something on the server - note the performance issue is only on reports that retrieve large data sets. For all smaller reports there is no issue.

Hyperion Reports on top of IOP?

Can Hyperion Reports provide reports from an IOP repository?
Thank you.

IOP supports MDX queries and there are "snapshot" commands that take MDX query as an argument and stores the results in a relational table. The MDX query can be used to serve any slice of cubular data and for any scenario. Once the data is in relational form, you can then use any reporting tool.
IOP also has an integration with OBIEE and that can be used for reporting against IOP data.

Hyperion Reports 7.2.5 -generating base level only of selected Organisation

Hi,
Edit - reposted in correction forum, please ignore
Hopefully this is the right place to ask about Hyperion reports - 7.2.5
I'm trying to design a report and need a nudge in the right direction...
The user should select their division and the reports should then display only the base level children of the selected division.
I've tried selecting Functions -
children of current pov for organisation - which gives the next level of the selected org
descendants of current pov - gives all levels below the selected org. (therefore duplicating parent/child levels)
Bottom of Hierarchy - gives all the base level of the whole organisation (rather than just the one selected)
Lists - level 0, organisation - as above, gives level 0 of the entire org
Someone tell me its possible to just get the level 0 of the current pov organisation...it must be something obvious I'm missing!
thanks
Amit
Edited by: user10084264 on 23-Sep-2009 04:05

Hi,
I am working on the same issue here. I tired to use
(level o of Account) Union (descenants of Corp Cost), but the result are still not " level o of Corp cost".
How to get " level o of Corp cost", Corp Cost is one member under "Account" dimension.
Thanks!

Hyperion reports to BI queries/workbooks

HI,
Can you anyone please give me some idea how to convert old Hyperion reports to BI queries/workbooks.
What are the steps involved in conversion?
Regards,
Ashok

Hi Ashok,
BW data could be reported from Hyperion by connecting the system with the right adapter,
the other way around isn't possible (querying hyperion data via BW) except by setting the hyperion DB as a DB/UD Connect source system and having remote IProviders on-top of it.
If you need then you can synchronize BW metadata in Hyperion then,
create a report in Hyperion which will retrieve data from a BW query released for OLE/DB for OLAP (query properties/extended).
now you can access any BW query / cube / multiprovider in BW system
Hope it helps.....
Regards,
Zakir

Hyperion Reports Page Dimension Auto Calc

In Hyperion Reports 7.x, is there a way to create an autocalculation in the page dimension? Similar to rows andcolumns, I would like to create a "grand total" memberwithin my page dimension that is a SUM of any dynamically selectedpagedimension (when prompted to select any multiple members). Please let me know if there is a way to perform this function. If there is a workaround, I would appreciate anyone's inputas well. Thanks for your help! Ron P.

1) Click on the top of the column and then go to the column properties pane on the right. Go to the Suppression section and you have a coulpe of choices. You can choose a Basic option and supress if the column Is Zero and/or Missing values. You can also choose advanced options and click the setup button. A new box will open and give you the ability to set criteria for suppressing the column. For instance if member name of product selected is "Product1" supress, otherwise show the column.2) There is no option, I am aware of, to do this. A non-elegant workaround would be to highlight the text on the HTML page, copy and paste it into Excel. The new version of Hyperion Reports 7.2 now supports exporting reports from HTML to Excel with Formating. I'm not sure whether or not that means headings will be exported as well.3) You have to use the grid POV to do this. Move your mouse to the top left corner of your grid, where the rows and columns meet. Right click and select "Grid Point of View Setup...". A new properties box will open up where you can restrict the POV to specific members.Hope this helps.Regards,Gary CrisciSenior ConsultantPinnacle Group Worldwide

Automating a Hyperion Report

Hi,
I'm trying to automate pulling a report out of essbase. The data export calcs create a level0 txt file which is hard to validate line by line against an an oracle report. I'm pretty much wanting to pull everything at the top level except the accounts dimension whiich needs to be at level 0 so I can compare the balance in Oracle to Hyperion. This needs to be an automated solution and I'll be using VBScript to run sql queries out of Oracle. Is it possible to pull a report at different levels within essbase in maxl or any other form? I'm really not familiar with Hyperion Reports. Is it possible to run a Hyperion Report via a script and have it produce a txt file?
I really appreciate any information on this and hope someone can help.

Hi,
Have you considered using the Essbase Report Script? It's got some capability to format the exported file. However, running report script can be slower than calc scripts in which some tuning may be required.

How to declare top of page in alv report

hi guru
how to declare top of page in alv report
thanks
subhasis

Hi,
check this simple program.
REPORT ZBHALV_LIST.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_SORT = SORT[]
IT_EVENTS = EVE[]
TABLES
T_OUTTAB = ITAB .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards,
Priyanka.

How to provide top of page in ALV reports

Hi....
here is requirement.
i entered some 1000 to 2000 in the selection screen.
now i want to display the same in output list.
that is the output from 1000 to 2000 are displayed with 1000 records
like this i want to display in top of list in alv report.
how to do this requirement.
thanks and regards,
k.swaminath reddy.

hi,
check this one
*& Report ZALV_FIELD_GRID1
REPORT ZALV_FIELD_GRID1
 NO STANDARD PAGE HEADING.
TABLES MARA.
type-pools :slis.
TYPES : BEGIN OF TMARA ,
 MATNR LIKE MARA-MATNR,
 MEINS LIKE MARA-MEINS,
 ERSDA LIKE MARA-ERSDA,
 color(4) type c,
 SEL type c,
 LIGHT TYPE C,
 END OF TMARA.
TYPES: BEGIN OF TMAKT,
 MATNR LIKE MAKT-MATNR,
 MAKTX LIKE MAKT-MAKTX,
 MAKTG LIKE MAKT-MAKTG,
 SEL TYPE C,
 COLOR(4),
 END OF TMAKT.
DATA: ITAB TYPE TMARA OCCURS 0 WITH HEADER LINE,
 ITAB1 TYPE TMAKT OCCURS 0 WITH HEADER LINE,
 wa_fieldcat type slis_fieldcat_alv,
 fieldcat type slis_fieldcat_alv occurs 0,
 i_layout type slis_layout_alv,
 WA_LISTHEADER TYPE SLIS_LISTHEADER ,
 i_LISTHEADER TYPE SLIS_LISTHEADER OCCURS 0,
 V_EVENTS TYPE SLIS_T_EVENT ,
 WA_EVENT TYPE SLIS_ALV_EVENT,
 I_TITLE_MARA TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED',
 I_TITLE_MAKT TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED',
 SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE,
 PRINT_CONT type slis_print_alv.
SELECTION SCREE
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
 INITIALIZATION
INITIALIZATION.
MATNR-low = '23'.
MATNR-high = '1000'.
MATNR-option = 'BT'.
MATNR-sign = 'I'.
APPEND MATNR.
ERSDA-low = '20030124'.
ERSDA-high = '20050302' .
APPEND ERSDA.
PERFORM FILLFIELD.
PERFORM FILLLAYOUT.
PERFORM build_print_params.
PERFORM FILL_SORT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
 SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT MATERIAL NUMBER RANGE'.
comm2 ='SELECT MATERIAL CREATION DATE'.
 START-OF-SELECTION
START-OF-SELECTION.
PERFORM READDATA.
PERFORM POPDATA.
*& Form READDATA
 text
FORM READDATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = MATNR-LOW
 IMPORTING
 OUTPUT = MATNR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = MATNR-HIGH
 IMPORTING
 OUTPUT = MATNR-HIGH.
SELECT MATNR
 ERSDA
 MEINS
 FROM MARA
 INTO CORRESPONDING FIELDS OF
 TABLE ITAB
 WHERE MATNR IN MATNR AND ERSDA IN ERSDA.
LOOP AT ITAB.
 data id_color type i VALUE 1.
 data id_colors(2) type c.
 IF ITAB-MATNR < '000000000000000100'.
 ITAB-LIGHT = '1'.
 ELSEIF ITAB-MATNR < '000000000000000150' AND ITAB-MATNR >
 '000000000000000100' .
 ITAB-LIGHT = '2'.
 ELSE.
 ITAB-LIGHT = '3'.
 ENDIF.
 id_color = id_color + 1.
 if id_color > 7.
 id_color = 1.
 endif.
 id_colors = id_color.
 concatenate 'C' id_colors '10' into itab-color.
 modify itab.
 CLEAR ITAB.
endloop.
ENDFORM. " READDATA
 Form FILLFIELD
FORM FILLFIELD .
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-outputlen = 20.
WA_FIELDCAT-HOTSPOT = 'X'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
*WA_FIELDCAT-EMPHASIZE = 'C210'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '2'.
*WA_FIELDCAT-EMPHASIZE = 'C510'.
WA_FIELDCAT-outputlen = 10.
wa_fieldcat-seltext_m = 'UNIT'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'ERSDA'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-outputlen = 15.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
*WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'CREAT DATE'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. "FILLFIELD
 Setup print parameters
form build_print_params.
PRINT_CONT-reserve_lines = '3'. "Lines reserved for footer
PRINT_CONT-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
 Form POPDATA
FORM POPDATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USER-COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOPPAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 I_GRID_TITLE = I_TITLE_MARA
I_GRID_SETTINGS =
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
 IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
 IS_PRINT = PRINT_CONT
 TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
ENDFORM. " POPDATA
 Form TOPPAGE
FORM TOPPAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
 ld_linesc(10) type c,
 I_DATE(10) TYPE C,
 I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DETAIL'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
 SY-DATUM+4(2) '.'
 SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
 into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = I_LISTHEADER
 I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "TOPPAGE
 Form FILLLAYOUT
FORM FILLLAYOUT .
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-lights_fieldname = 'LIGHT'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
I_LAYOUT-no_totalline = 'X'.
ENDFORM. "FILLLAYOUT
 Form FILL_SORT
FORM FILL_SORT .
SORT-DOWN = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'MATNR'.
SORT-tabname = 'MARA'.
APPEND SORT.
ENDFORM. " FILL_SORT
 Form EVENT_CALL
FORM EVENT_CALL .
DATA: I_EVENT LIKE V_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = V_EVENTS.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
 Form POPULATE_EVENT
FORM POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'USER_COMMAND'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
 WA_EVENT-NAME.
READ TABLE V_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
 INTO WA_EVENT.
IF SY-SUBRC = 0.
 move 'END_OF_PAGE' to WA_EVENT-FORM.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
 WA_EVENT-NAME.
endif.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM END_OF_PAGE.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
ENDFORM.
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
 WHEN '&IC1'.
 CASE RS_SELFIELD-FIELDNAME.
 when 'MATNR'.
 read table itab with key matnr = RS_SELFIELD-VALUE.
 if sy-subrc = 0.
 PERFORM DATA_RETRIEVAL_MAKT USING RS_SELFIELD-VALUE.
 PERFORM BUILD_FIELDCATLOG_MAKT.
 PERFORM FILLLAYOUT_MAKT.
 PERFORM DISPLAY_ALV_MAKT.
 CLEAR RS_SELFIELD.
 ENDIF.
 ENDCASE.
ENDCASE.
ENDFORM. "user_command
 Form DATA_RETRIEVAL_MAKT
FORM DATA_RETRIEVAL_MAKT USING TMATNR .
SELECT MATNR
 MAKTX
 MAKTG
 UP TO 100 ROWS
 FROM MAKT
 INTO TABLE ITAB1
 WHERE SPRAS = 'EN' AND MATNR = TMATNR.
LOOP AT ITAB1.
 data id_color type i VALUE 1.
 data id_colors(2) type c.
 id_color = id_color + 1.
 if id_color > 7.
 id_color = 1.
 endif.
 id_colors = id_color.
 concatenate 'C' id_colors '10' into itab1-color.
 modify itab1.
 CLEAR ITAB1.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL_MAKT
 Form FILLLAYOUT_MAKT
FORM FILLLAYOUT_MAKT .
CLEAR I_LAYOUT.
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
ENDFORM. " LAYOUT_MAKT
 Form BUILD_FIELDCATLOG_MAKT
FORM BUILD_FIELDCATLOG_MAKT .
REFRESH FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
WA_FIELDCAT-EMPHASIZE = 'C510'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTG'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-EMPHASIZE = 'C210'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG_MAKT
 Form DISPLAY_ALV_MAKT
FORM TOP-OF-PAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
 ld_linesc(10) type c,
 I_DATE(10) TYPE C,
 I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DESCRIPTION FOR SELECTED NUMBER'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
 SY-DATUM+4(2) '.'
 SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB1 lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
 into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = I_LISTHEADER
 I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. "TOP-OF-PAGE
*& Form DISPLAY_ALV_MAKT
 text
FORM DISPLAY_ALV_MAKT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
 I_GRID_TITLE = I_TITLE_MAKT
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = fieldcat
 TABLES
 T_OUTTAB = ITAB1
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_MAKT
rewards point
regards
Ashok kumar

Hyperion Report taking a long time to process local query

Hi All,
I am trying to run a report on Hyperion IR 9.3.1. I am facing a performance issue with this report. I am joining 13 tables using full outer join. Each table is having data about 900 rows and the final output i am getting from the local query is about 11000 rows. This local query is taking a long time to get process about 3 - 5 minutes. I suppose it should run with in 30 sec as number of rows are very few. Can anyone tell me what is the problem with this local query and how the performance of the report can be increased?
Thanks in advance.
Regards
Ujjawal

Be aware that XP takes approx 1gb of your RAM leaving you with 1gb for whatever else is running. MS Outlook is also a memory hog.
To check Virtual Memory Settings:
Control Panel -> System
System Properties -> Advanced Tab -> Performance Settings
Performance Options -> Adavanced Tab - Virtual Memory section
Virtual Memory -
what are
* Initial Size
* Maximum Size
In a presentation at one of the Hyperion conferences years ago, Mark Ostroff suggested that the initial be set to the same as Max. (Max is typically 2x physical RAM)
These changes may provide some improvement.

How to remove business area from the Hyperion report

Hi All,
Kindly tell me the steps required to remove the business area from the Hyperion report.
Regards,
Ajay

s

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Top/Bottom reports in Hyperion Reports?

Similar Messages

Maybe you are looking for