Top button not working when I want to lock my phone

I'm having trouble locking my phone. The top button isn't working properly and I can only use the left side of the button but have to put in extra effort to make sure it locks. Anyone else having this problem? Or suggestions?

Unfortunately,heard this before,happens from time to time.What may have happened and I am saying may is that you went to one of those kieos that they have in the mall type stores and the person just wanted to sell you a new cable,very common. If you were to send it back ,Apple more than likely would have sent you a new cable but who does that.Its like anything else,have a Verizon phone and go to one of those mall stores and they try to make money because that is how the sales person gets his cash,go to a Verizon store ,not a franchise and they take excellent care of you,they want a return customer.
Apple is an excellent product,unfortunately they like many other stores try to get their share of the business and have to put some cost saving practices into their product to stay competitive.Lately with some of there changes they make a product that is not very easy to keep together,weak frames,digitizers and accessories.Like the car industry they want you back purchasing more products,so they need to get their money in inventive ways.That is just too bad,like I say they have a great product,just need to be a bit more rugged.Like many others here will dis agree with my comments,their answer will be just buy a case for your phone which will then just make it bulky and help to protect the phone but still susceptible to getting wet and damaged by water.My opinion is that some of the older phones were better than anything on the market today,take for example the Casio Boulder,indestructible for the most part.Freeze it,drop it in water,run it over bake it in the sun and it keeps on working. Try anyone of those things with an Apple product and you will be purchasing a new phone.

Similar Messages

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why is my password not working when i want to update apps?

Please tell me why my Apple ID is not working when i want to update apps?(just the purchased apps are not working).I now have an acount that dosen't have a card entered.

For examle i have iGO primo and my password is not working (i already reset it).

My do not disturb is not working, when i turn it on my phone still rings and vibrates

My do not distub button is not working, when i turn it on my phone will still ring and vibrate

Do you have the screen off? If you're using the iPhone at the time, calls and messages still come through as normal.

Layered menu buttons not working when built.

I have a project that has one menu and one track. The menu has 7 buttons linked to 7 different markers in the track. When I run the simulation in DVD SP, the buttons link fine, and play as they should...but when I build the project and run it in DVD player or burn it to a disk, the buttons do not work.
If I create a non-layered menu, the buttons will work when built...
I feel like i'm just missing one little setting on the layered menu
Thanks
Mac OS X (10.4.8)

Don't forget that a layered menu will normally need two presses to get anything to happen, one to select the button and the second to activate it.
That said, are you sure that you have got the psd file set up correctly? I would recommend using a background layer with everything on it that you want to appear when not selected, then only adding layers with the changes necessary to show the button selection/activation.

SP2013: OK button not working when editing Settings on List app

Hi, all! Currently running Sharepoint 2013 under Server 2008 R2. My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11. I am currently a Domain Admin for our corp domain.
Long story short, I've created a test List app. When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app. No access spinning, no errors on-screen (also none visible when I view
the source of the SP page or header), no nothing. The highlight of the button changes as expected, but nothing else. The Cancel button will Cancel as expected, but OK does nothing whatsoever.
My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read). A Check Permissions on myself yield the following:
Full Control | Given through the "~site~ Owners" group.
Read | Given through the "~site~ Visitors" group.
Edit | Given through the "~site~ Members" group.
(Note: "~site~" is replacing the actual SP2013 site name above)
I'm thinking it has something to do with effective permissions. I just added myself to the Owners group this morning with no effect. I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either. Suggestions
are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
Thanks, guys!
Steve

Hi Steve,
From your description, my understanding is that OK button does not work when you create a new column.
Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
Besides, please try to create a new column with steps below:
1.
Click LIST tab in the Ribbon.
2.
Click Create Column in Mange Views section.
3.
Create your column in the dialog.
4.
Click OK button.
In addition, please confirm these points below:
1.
Test your issue in another list.
2.
Test your issue with another computer.
3.
Test your issue with another account.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Iphone 5 top button not working!

It says my Repairs and Service Coverage is still active.. Does that mean I can bring in my old iphone 5 in and get a new one?

russell_314 Hello there! I understand that it is extremely annoying when the power button stops working and it makes use of the phone very difficult. I reviewed your post and would like to speak with you directly. Please follow me at sheritah_vzw and send a private message with your mobile number and the best time to call. I look forward to hearing from you soon!
How To: Direct Message
Message was edited by: Verizon Moderator

Exit button not working when entering wrong date

how do I get the message not to appear by day Invalid (Frm-50004) in forms

dear Shrikant,
i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
"FRM-50004: Day must be between 1 and last of month."
as i m entering wrong date i want to exit my form but my exit button is not working properly.
The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
i have kept my push buttons mouse and keyboard navigation property to "NO".
then also it is not working tell me if any solution is there.

Buttons not working when implimented using Adobe Configurator

Hi there, i recently learned about a new program called Adobe Configurator, which allows you to build your own custom panels for Photoshop. The program is brilliant, a brilliant idea, and all seems to work perfectly. However, its connection to Photoshop in only two buttons that i have tried to use, seems to fail.
I set up two of my custom buttons to follow the path of "File > Share My Screen...", and the other to follow the path of "File > Device Central...". However, weather i have a document opened or not, these buttons never work. I get the error message saying "The command "Select" is not currently avalible.". It says this with other buttons, but only when there is nothing open, so it is understandable. So do these buttons just not work, or am i doing it wrong?
Thanks.

That's a limitation of many PDF readers on the iPad. They don't support interactivity well. There are a few that do. Here's a posting on InDesignSecrets.com that I did on the subject of differences between PDF readers:
http://indesignsecrets.com/finding-the-best-tablet-pdf-reader.php
My favorite is PDF Expert. However, I later found I had to outline the type if I used them in an InDesign-created button.

Pdf buttons not working when pdf loads in browser

hi
I have a pdf with buttons which work fine. Once pdf is put on our website and you click on it, it opens in firefox ok but none of the buttons work.
Safari, chrome - work

The road to hell is paved with good intentions... FF wanted to provide their users an easy-to-use, built-in PDF viewer, which is good. Problem is that developing a fully compatible PDF viewer is a very complex task that requires a lot of time and effort, so they decided (it seems) to settle for something that's "good enough". So now users are stuck with something that usually does an OK job when it comes to just displaying a simple PDF file, but as soon as you have a more complex file (for example, one with form fields) it breaks down entirely and either fails to load the file at all, or does so incorrectly, and the developers are left sorting out the mess...

XML Data Button Not working when Exported onto BusinessObjectEnterprise

I have an XML data button on a dashboard. It works fine in preview and on web. It does not work if it is exported onto Business Object server using XCelsius' Export to BusinessObjectEnterprise.
In the InfoView, I double click on the flash file, the flash files opens as expected, but when XML Data button is clicked, no new data seem to come in...
If I export as Adobe file, and then post it onto the server, and view it using Info View, the XML data button works just fine.
Please advise.

Hi All,
Even I have similar requirement.
Any work around is appreciable.
Thanks
Vinod

Buttons not working when slide is open

I bought my E65 like .. umm.. a week ago, n now when i open the slide " right button, mute button, c button contacts button and the exit button isnt working, n when i close the slide they works only... it has no warranty on it because i bought a used one.. so anyone knows how to solve this problem? its irritating me ..

Hi Jerry,
Iam also facing the same problem ....were you able to get solution ..if yes plz share...
When I Clikced on Add Macros button in Workbook Settings ,i was able to access the buttons ..but once i close and open the workbook iam again getting the same error..
Iam not able to Save the Workbook settings afte Clicking on ADD Macros...
Regards,
Ravi

Itunes does not work when I want to play Mp4 videos with most recent versions

When I want to play videos with mp4 format on itunes, it does not do anything and I have to close itunes with the windows system manager. Does any one know how to solve this problem? I did not have this isue with 10.5 and previous versions of itunes.

I found the solution, the problem was the encoding of the configuration files.
I put:
=> Encoding: UTF8 without signature
=> line endings: UNIX(LF)
And now it works :)

LG COSMOS Power Button not working. I need to power up phone.

Hi there. The battery is charging, but the phone will not turn on. Other buttons seem to be working, because the backlight turns on when I push them. But, the power button will not work. Pleas advise, an alternative method to powering up my phone.
Thanks!

Plug in your charger and when it is on the black and white LG screen, take the charger out. The phone will boot up.
This has worked for me consistently and it is counter-intuitive!

Top button not working when I want to lock my phone

Similar Messages

Maybe you are looking for