Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)

All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

Similar Messages

KE28 Top-down distribution for only part of the Value Field

Hi Experts,
We have a situation where we will make manual postings in CO-PA through KE21N. Part of this postings will be at the lowest detailed level and part will be for a more summarized level od characteristics. All the postings will flow to the same value field.
We need to make a top-down distribution only for the postings that were made in a summarized level, because the other postings already have the details that we need.
Is it possible?
Kind Regards
Mayumi Blak

Hi Venkata,
Please note that :-
you can not distribute to a characteristic that already contains a
value. Please see note 77476. If you want to distribute to eg.
profit center, then the characteristic must be initial (in the data
to be distributed).
In the case where the log showed "number of receivers" but no line
written is a common problem in transaction KE28 logged by customers.
One example is that, if the amount of line items is 0.00 for all the
receivers, no line item will be written.
No values in reference data:
If there are no values in reference data for some segments (see the
log). No records are posted (segments which were distributed, but
their value is zero i.e. there is no value to be distributed, are not
posted).
No initial values in the distribution level (ie. # - non assigned)
in each of the characteristics in distribution level.
Kind Regards,
Abhisek Patnaik,

SQ03, user group removed after release upgrade from 4.6C to ECC6

Dear All,
I have a problem about user group - transaction code SQ03.
After the release upgrade from 4.6C to ECC6 the user group, that I created in the old system, are not present in quality and production environment.
In the development environment there is the user group but doesn't contain the queries that I created in the old environment.
How can I solve this issue?
Can I recover all missing queries?
(moreover I can access to the old environment)
Thanks in advance.
Regards

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Unicode error while upgrading from 4.6 to ECC 6.0

Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel            *
FORM open_downloaded_file_in_excel.
DATA:
    lv_ole_books       TYPE ole2_object,
    lv_ole_sheets      TYPE ole2_object,
    lv_subrc           LIKE sy-subrc,
    lv_title(70)       TYPE c,
    lv_text1(70)       TYPE c,
    lv_text2(70)       TYPE c.
start excel
CREATE OBJECT obj_ex_sheet      'EXCEL.SHEET'.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet     'Application' = obj_ex_app.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app        'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books      'Open'       = obj_ex_wbook
    EXPORTING #1 = gv_filename
              #2 = 2
              #3 = 0
              #4 = 1
              #5 = 0
              #6 = 0
              #7 = 1.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_wbook.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook      'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets     'Item'       = obj_ex_wsheet
    EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet    'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
    EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet    'Name'       = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
       EXCEPTIONS
            OTHERS = 0.
ENDFORM.
regards,
Divya

hi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Issues during technical upgrade from 4.6c to ecc 6.0

Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BE

Hi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala

Information on impact on interfaces due to upgrade from 4.7 to ECC 6.0

Hi friends,
We are upgrading from 4.7 to ECC 6.0. We have some interfaces with the SAP system in our current version.I need information on which of these interfaces will be affected due to Upgrade of the system to ECC 6.0
Mentioned below is the list
SAP R/3 --- CRM 5.0
SAP R/3 --- Xi PAY
SAP R/3 --- Vertex
SAP R/3 --- TEKRF
SAP R/3 --- Virsa
SAP R/3 --- WTX
SAP R/3 --- SOLMAN
It would be really helpful if you can just provide the initial impact analysis for these interfaces due to upgrade.Points will be rewarded.
Thank in advance.
Regards,
Pawan.

Hi
there are several oss-notes available which explain how to transfer your text customizing to the new procedure. This happens if you are uppgrading from a release 4.6c or lower. If you are already in 4.7, there should be no problem with text determination.
Regards
Rauno

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Requirements for upgradation from 4.7 to ECC 6.0

Hi Guru's,
Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji

LONGPOST.LOG Errors during Upgrade from 4.6C to ECC 6.0

Dear all,
We have received the below errors during our upgrade from 4.6C to ECC 6.0.
Basically we have received three types of errors:
1.
4PETG065 RSUPGDEC: Table/structure "BAPE_VBAK" (component "SD-SLS" ) enhanced illegally: Error "2"
2.
A2PESEEF_BADI 103 BAdI implementation "/IRM/BADI_SDDOCFLOW" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZZ_MG_MASS_NEWSEG" must still be migrated A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
3.
3PETG447 Table and runtime object "/SSF/DHEAD" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/DTAB" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/PTAB" exist without DDIC reference ("Transp. table")
Can anyone help us how to solve this issues.
Thanks & Regards
Senthil

Hi,
Senthil following are ans to ur questions
1. After the SPAU remediation is completed, should I manually release the transport or should I start the upgrade and the upgrade will release that transport?
Ans : Once your SPAU remediation is completed you should release the requests and then start the upgrade of the DEV system.
2. How do we import this SPDD & SPAU transport in the QA and PRD, I mean at what stage of the upgrade we need to specify/ include this transport?
Ans : Now when you start the QA or PRD upgrade at that time you come across a phase during PREPARE called ADJUSTPRP.
Refer following note for further information --
SAPNote 124522 - Importing a modification adjustment in 2nd upgrade
3. Suppose the QA & PRD has more objects to adjust than our Dev box, and this transport will not take care of the delta objects, so in that case how should we remediate, we need to create an other transport request in QA and then it will become two transports?
Ans : First of all this should not be the scenario where you have more modified objects than that in DEV. As all the modfications should take place in DEV first and then should be transported to QA and then PRD. But in such case what you can do is complete the upgrade of QA system and then you are still having 14 days to complete the SPAU objects. So you can make another request which can be transported as a post upgrade activity once the upgrade is completed in production. For SPDD you will have to take care of the SPDD objects if there are different than those in DEV during the ACT_700 phase only or else you might risk data.
This is the reason why SAP always asks you to follow a proper transport path.
4. If our dev box has more objects for remediation than our QA & PRD, then will these objects be also imported into the QA & PRD box?
Ans : Yes, thats why you should be very sure about the SPAU objects that you have found in DEV. You need to compare the objects with QA and PRD and then only make the modifications.
I hope i have answered all your queries.
Regards,
Suhas

Transactions missing in Role After Upgrade from 4.6c to ECC 6.0

Hello Friends,
I did multiple searches on this question but it was unsuccessful. We are upgrading from 4.6c to ECC 6.0. We are testing roles to make sure the migrate properly.
Irrespective of su25. There are transactions that are not obsolete and are missing in ECC 6.0
For example if I have a role called FIROLE. Which has 20 tcodes in 4.6c. When we upgrade to ECC 6.0 8 tcodes will be missing. This is not because the tcodes become obsolete.
What is the best way to approach this. Should we be testing each role?
Thanks!

Hello Imran,
transactions can be 'obsolete' also if they still exist.....
If the application developers create new functionality, new look,.... in new transactions but still let the 'old' ones in the system.
Just think about the ME2*-transactions..... The developer can decide, that such new transactions should replace the old ones after upgrade in the roles or let the old ones as they are.
You can get an overview about replaced/obsolete transactions by reviewing table PRGN_CORR2 (make sure, that you have the latest version, according to [SAP Note 991377|https://service.sap.com/sap/support/notes/991377] !!!). SU25 gets its information from that table.
b.rgds, Bernhard

Upgradation from 4.5B to ECC 6.0

Hi,
We are doing an upgrade from 4.5B to ECC 6.0. any relevant documents are invited.Can somebody help me with procedure.
Documents can also be send to my mail id: [email protected]
Thanks,
Satish.

Dear Satish,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Upgrading from 4.6 to ECC 6.0

Hello all,
Kindly can any one provide me documentation on upgrading from 4.6 to ECC 6.0 Related to Finance Module.
It will be very helpful If you can help me in the upgrading process of Finance/controlling about the activities Involved.
Email id : [email protected]
Thanking you in advance
cheers
Veena

Dear veena peddineni,
Hope this helps you.
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Interview questions on upgrades from 4.7 to ECC

Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
Thanks

Hi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)

Similar Messages

Maybe you are looking for