Top N Bottom N or All
Post Author: PPrakriya
CA Forum: General
I am using Crystal Reports - Professional version XI with Oracle DB 9i
Can i pass the selection of Top N or Bottom N or All values as a parameter value!
I want to give this selection choice to the user.
Any help is appreciated
Thank you, Padie
Hi NSMM,
As Jeff says, it needs a rule to follow.
Enter your rule, and "Show rows" is no longer grey.
The checkbox is so you can turn a rule off or on.
Sorry if this is a double post. I thought it posted, but it has not appeared.
Regards,
Ian
Similar Messages
-
I have all my clips with an extra edge around the top and bottom I want to remove
As you can see from the image below, I have all my source videos recorded at 1024x820. I want to, using Premiere clip this to 1024x768 removing some from both the top and bottom. I'll have hundreds of clips of this shape (1024x820) I will import into premiere. Is there some kind of transformation I can do that will clip the top and bottom so that my exports come out at 1024x768? I don't want to shrink the full picture, I want to clip the top and bottom edges cleanly.
All I am doing is the following:
import my mov file that is 1024 x 820
create a sequence that is 1024 x 768
export the sequence
I made a video showing the steps (very boring, sorry).
I'm sure there is something simple I'm missing. i'm 99% sure my result is wrong from the looks of it in the movie player.
here is the video: https://www.dropbox.com/s/5wjs8p3v0sjh8uv/livewriterdemo_fromcamtasia_final.mov -
How to align text at the top and bottom of a cell?
I'm making a periodic table and need help with aligning text at the top and bottom of a cell. I'll have a picture in the middle of the cell with text above and below the pic. Thank you in advance for any kind of suggestions you can give me.
It sounds as though you want to have 3 separate items inside of a single cell; text at the top of the cell, text at the bottom of the cell, and then a picture in the middle of the cell. I am no expert, but to my knowledge that is not possible (someone please correct me if I am wrong.) I also cannot figure out how to put a picture inside of a cell itself.
I do have a way to accomplish the end result so long as what you need is the final look and not a useable table in numbers.
Create 2-3 cells for each element. (The middle cell, unless you can put pictures in a cell and I don't know, would just be there for peace of mind, but would hold the picture if you can, I would just do two if the pictures are to be in front of the cell anyway.) The top cell align text to top on the Text tab of the inspector. The bottom cell, align text to bottom on the same tab. Then place the picture in the middle. Now, you have what you want except there is one or two lines dividing the cells. To get rid of this, either click the middle cell if you have one, or the top or bottom cell. Click on the Cell tab of the inspector. Select the bottom border and/or top border button and select "No Border" under border styles. To make this fast, select a full row at a time, or use command click to select all of the same type of rows (middle, top, or bottom) and change all cells at once.
I hope this helps. Best of luck!
~Bret -
I am super frustrated with Safari in ios 7. I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex look of the tabbed windows. So I can see the pages. Hope this is making sense. Why am I not seeing the pages button on the bottom right of Safari?
Thanks!Bummer! Hopefully this will change in the future. At least I know now that I am not crazy for not seeing the pages icon! Thanks so much :)
-
my ipad stopped working... all i have is a gray bar that moves from top to bottom then over again
And which update?
After you get your problems straightened out, recommend that you update to OS 10.6.8, check software update for all the other updates that goes along w/it. -
Four straight lines have appeared on my screen, top to bottom. Any idea where the came from, and can they be removed? These all come within the past few days.
It's most likely the Display going out on a few lines, but can be Graphic card related, which model & display?
-
I was using Firefox for a few years with great enjoyment. Recently I opened it and within a second or so, it enlarged to the point that the top and bottom of the screen expanded off the screen. No other windows in any other program are doing this. The only way to close it is by using the task manager. Very frustrated. What other info do you need?
Hi ConnieHampton,
FIrefox will remember the last window size you had, which is why it keeps opening too large each time you open and close it. To fix this, try resetting Firefox: https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved?esab=a&s=resize+window&r=7&as=s
If you don't see your menu bar, you may be in full screen mode, and can turn it off by following these instructions: https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen&r=0&as=s
If this doesn't work, please let us know and we'll figure out another way to fix it. -
My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
Set top and bottom inset spacing values in Text Frame Options via jsx script
I am looking for a way to set the top and bottom inset spacing values only to 2 points in Text Frame Options via a .jsx scrpt.
For years, I have used a script that sets Preferences, such as:
with(app.storyPreferences){
opticalMarginAlignment = false;
opticalMarginSize = 12; // pts
I would like to add the code to this same script that would make Top = 0p2 and Bottom 0p2 but leave Left and Right as 0p0.
Any help would be greatly appreciated.Here is the full .jsx file that we now use to set preferences.
Ideally, this could be modified to include setting any text frame created to have 0p2 inset Top and Bottom, but 0p0 Left and Right:
//ApplicationTextDefaults
//An InDesign CS2 JavaScript
//Sets the application text defaults, which will become the text defaults for all
//new documents. Existing documents will remain unchanged.
with(app.textDefaults){
alignToBaseline = false; // align to baseline grid
try {
// appliedFont = app.fonts.item("Times New Roman");
appliedFont = app.fonts.item("Helvetica");
catch (e) {}
try {
fontStyle = "Medium";
catch (e) {}
autoleading = 100;
balanceRaggedLines = false;
baselineShift = 0;
capitalization = Capitalization.normal;
composer = "Adobe Paragraph Composer";
desiredGlyphScaling = 100;
desiredLetterSpacing = 0;
desiredWordSpacing = 100;
dropCapCharacters = 0;
if (dropCapCharacters != 0) {
dropCapLines = 3;
//Assumes that the application has a default character style named "myDropCap"
//dropCapStyle = app.characterStyles.item("myDropCap");
fillColor = app.colors.item("Black");
fillTint = 100;
firstLineIndent = "0pt";
// firstLineIndent = "14pt";
gridAlignFirstLineOnly = false;
horizontalScale = 100;
hyphenateAfterFirst = 3;
hyphenateBeforeLast = 4;
hyphenateCapitalizedWords = false;
hyphenateLadderLimit = 1;
hyphenateWordsLongerThan = 5;
hyphenation = true;
hyphenationZone = "3p";
hyphenWeight = 9;
justification = Justification.leftAlign;
keepAllLinesTogether = false;
keepLinesTogether = true;
keepFirstLines = 2;
keepLastLines = 2;
keepWithNext = 0;
kerningMethod = "Optical";
kerningValue = 0;
leading = 6.3;
// leading = 14;
leftIndent = 0;
ligatures = true;
maximumGlyphScaling = 100;
maximumLetterSpacing = 0;
maximumWordSpacing = 160;
minimumGlyphScaling = 100;
minimumLetterSpacing = 0;
minimumWordSpacing = 80;
noBreak = false;
otfContextualAlternate = true;
otfDiscretionaryLigature = true;
otfFigureStyle = OTFFigureStyle.proportionalOldstyle;
otfFraction = true;
otfHistorical = true;
otfOrdinal = false;
otfSlashedZero = true;
otfSwash = false;
otfTitling = false;
overprintFill = false;
overprintStroke = false;
pointSize = 6.3;
// pointSize = 11;
position = Position.normal;
rightIndent = 0;
ruleAbove = false;
if(ruleAbove == true){
ruleAboveColor = app.colors.item("Black");
ruleAboveGapColor = app.swatches.item("None");
ruleAboveGapOverprint = false;
ruleAboveGapTint = 100;
ruleAboveLeftIndent = 0;
ruleAboveLineWeight = .25;
ruleAboveOffset = 14;
ruleAboveOverprint = false;
ruleAboveRightIndent = 0;
ruleAboveTint = 100;
ruleAboveType = app.strokeStyles.item("Solid");
ruleAboveWidth = RuleWidth.columnWidth;
ruleBelow = false;
if(ruleBelow == true){
ruleBelowColor = app.colors.item("Black");
ruleBelowGapColor = app.swatches.item("None");
ruleBelowGapOverprint = false;
ruleBelowGapTint = 100;
ruleBelowLeftIndent = 0;
ruleBelowLineWeight = .25;
ruleBelowOffset = 0;
ruleBelowOverprint = false;
ruleBelowRightIndent = 0;
ruleBelowTint = 100;
ruleBelowType = app.strokeStyles.item("Solid");
ruleBelowWidth = RuleWidth.columnWidth;
singleWordJustification = SingleWordJustification.leftAlign;
skew = 0;
spaceAfter = 0;
spaceBefore = 0;
startParagraph = StartParagraph.anywhere;
strikeThru = false;
if(strikeThru == true){
strikeThroughColor = app.colors.item("Black");
strikeThroughGapColor = app.swatches.item("None");
strikeThroughGapOverprint = false;
strikeThroughGapTint = 100;
strikeThroughOffset = 3;
strikeThroughOverprint = false;
strikeThroughTint = 100;
strikeThroughType = app.strokeStyles.item("Solid");
strikeThroughWeight = .25;
strokeColor = app.swatches.item("None");
strokeTint = 100;
strokeWeight = 0;
tracking = 0;
underline = false;
if(underline == true){
underlineColor = app.colors.item("Black");
underlineGapColor = app.swatches.item("None");
underlineGapOverprint = false;
underlineGapTint = 100;
underlineOffset = 3;
underlineOverprint = false;
underlineTint = 100;
underlineType = app.strokeStyles.item("Solid");
underlineWeight = .25
verticalScale = 100;
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
horizontalMeasurementUnits = MeasurementUnits.points; // Ruler Units, horizontal
verticalMeasurementUnits = MeasurementUnits.points; // Ruler Units, vertical
//General preference panel
with(app.generalPreferences){
pageNumbering = PageNumberingOptions.section; // Page Numbering, View
toolTips = ToolTipOptions.normal; // Tool Tips
// Not supported in CS4
// toolsPalette = ToolsPaletteOptions.doubleColumn; // Floating Tool Palette
completeFontDownloadGlyphLimit = 2000; // Always Subset Fonts...
try {
//Wrapped in try/catch in case it is run with CS4 and earlier to avoid the error
preventSelectingLockedItems = false; // Needed for CS5+
catch (e) {}
//Type preference panel
with (app.textEditingPreferences){
tripleClickSelectsLine = true; // Triple Click to Select a Line
smartCutAndPaste = true; // Adjust Spacing Automatically when Cutting and Pasting Words
dragAndDropTextInLayout = false; // Enable in Layout View
allowDragAndDropTextInStory = true; // Enable in Story Editor
with(app.textPreferences){
typographersQuotes = true; // Use Typographer's Quotes
useOpticalSize = true; // Automatically Use Correct Optical Size
scalingAdjustsText = true; // Adjust Text Attributes when Scaling
useParagraphLeading = false; // Apply Leading to Entire Paragraphs
linkTextFilesWhenImporting = false; // Create Links when Placing Text and Spreadsheet Files
// Missing following (Font Preview Size, Past All Information/Text Only)
//Advanced Type preference panel
with(app.textPreferences){
superscriptSize = 58.3; // Superscript, size
superscriptPosition = 33.3; // Superscript, position
subscriptSize = 58.3; // Subscript, size
subscriptPosition = 33.3; // Subscript, position
smallCap = 70; // Smallcap
with(app.imePreferences){
inlineInput = false; // Use Inline Input for Non-Latin Text
//Composition preference panel
with(app.textPreferences){
highlightKeeps = false; // Keep Violations
highlightHjViolations = false; // H&J Violations
highlightCustomSpacing = false; // Custom Tracking/Kerning
highlightSubstitutedFonts = true; // Substituted Fonts
highlightSubstitutedGlyphs = false; // Substituted Glyphs
justifyTextWraps = false; // Justify Text Next to an Object
abutTextToTextWrap = true; // Skip by Leading
zOrderTextWrap = false; // Text Wrap Only Affects Text Beneath
//Units & Increments preference panel
with(app.viewPreferences){
rulerOrigin = RulerOrigin.spreadOrigin; // Ruler Units, origin
// These are set at the end of the script after all the changes have been made
// horizontalMeasurementUnits = MeasurementUnits.points; // Ruler Units, horizontal
// verticalMeasurementUnits = MeasurementUnits.inches; // Ruler Units, vertical
pointsPerInch = 72; // Point/Pica Size, Points/Inch
cursorKeyIncrement = 1; // Keyboard Increment, Cursor Key
with(app.textPreferences){
baselineShiftKeyIncrement = 2; // Keyboard Increment, Baseline Shift
leadingKeyIncrement = 2; // Keyboard Increment, Size/Leading
kerningKeyIncrement = 20; // Keyboard Increment, Kerning
//Grids preference panel
with(app.gridPreferences){
baselineColor = UIColors.lightBlue; // Baseline Grid, Color
baselineStart = 48; // Baseline Grid, Start
baselineDivision = 6; // Baseline Grid, Increment Every
baselineViewThreshold = 50; // Baseline Grid, View Threshold
baselineGridRelativeOption = BaselineGridRelativeOption.topOfPageOfBaselineGridRelativeOption; // Baseline Grid, Relative To
gridColor = UIColors.lightGray; // Document Grid, Color
horizontalGridlineDivision = 12; // Document Grid, Horizontal, Gridline Every
horizontalGridSubdivision = 12; // Document Grid, Horizontal, Subdivisions
verticalGridlineDivision = 12; // Document Gird, Vertical, Gridline Every
verticalGridSubdivision = 12; // Document Grid, Vertical, Subdivisions
gridsInBack = true; // Grids in Back
documentGridSnapto = false; // snap to grid or not
documentGridShown = false; // show document grid
//Guides & Pasteboard preference panel
with(app.documentPreferences){
marginGuideColor = UIColors.violet; // Color, Margins
columnGuideColor = UIColors.magenta; // Color, Columns
with(app.pasteboardPreferences){
bleedGuideColor = UIColors.fiesta; // Color, Bleed
slugGuideColor = UIColors.gridBlue; // Color, Slug
previewBackgroundColor = UIColors.lightGray; // Color, Preview Background
minimumSpaceAboveAndBelow = 72; // Minimum Vertical Offset
with(app.viewPreferences){
guideSnaptoZone = 4; // Snap to Zone
with(app.guidePreferences){
guidesInBack = false; // Guides in Back
//Dictionary preference panel
with(app.dictionaryPreferences){
composition = ComposeUsing.both; // Hyphenatin Exceptions, Compose Using
mergeUserDictionary = false; // Merge User Dictionary into Document
recomposeWhenChanged = true; // Recompose All Stories When Modified
// Missing (Lang, Hyph, Spelling, Double Quotes, Single Quotes)
//Spelling preference panel
with(app.spellPreferences){
checkMisspelledWords = true; // Find, Misspelled Words
checkRepeatedWords = true; // Find, Repeated Words
checkCapitalizedWords = true; // Find, Uncapitalized Words
checkCapitalizedSentences = true; // Find, Uncapitalized Sentences
dynamicSpellCheck = true; // Enable Dynamic Spelling
misspelledWordColor = UIColors.red; // Color, Misspelled Words
repeatedWordColor = UIColors.green; // Color, Repeated Words
uncapitalizedWordColor = UIColors.green; // Color, Uncapitalized Words
uncapitalizedSentenceColor = UIColors.green; // Color, Uncapitalized Sentences
//Autocorrect preference panel
with(app.autoCorrectPreferences){
autoCorrect = true; // Enable Autocorrect
autoCorrectCapitalizationErrors = false; // Autocorrect Capitalization
// Missing (Language, Misspelled word pairs)
//Display Performance preference panel
with(app.displayPerformancePreferences){
defaultDisplaySettings = ViewDisplaySettings.typical; // Preserve Object-Level
persistLocalSettings = false;
// Missing (antialiasiing, greek below
//Story Editor Display preference panel
with(app.galleyPreferences){
textColor = InCopyUIColors.black; // Text Color
backgroundColor = InCopyUIColors.white; // Background
smoothText = true; // Enable Anti-Aliasing
antiAliasType = AntiAliasType.grayAntialiasing; // Type
cursorType = CursorTypes.standardCursor; // Cursor Type
blinkCursor = true; // Blink
// Missing (Font, Size, Line Spacing & Theme)
//File Handling preference panel
with(app.generalPreferences){
includePreview = true; // Always Save Preview Images with Doc
previewSize = PreviewSizeOptions.medium; // Preview Size
with(app.clipboardPreferences){
preferPDFWhenPasting = false; // Prefer PDF When Pasting
copyPDFToClipboard = true; // Copy PDF to Clipboard
preservePdfClipboardAtQuit = false; // Preserve PDF Data at Quit
// Missing (Enable Version Cue)
// Optical margin (hanging punctuation, outside margins)
with(app.storyPreferences){
opticalMarginAlignment = false;
opticalMarginSize = 12; // pts
//Wrap Up (do at end of script)
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
horizontalMeasurementUnits = MeasurementUnits.picas; // Ruler Units, horizontal
verticalMeasurementUnits = MeasurementUnits.inches; // Ruler Units, vertical
// These two flags are turned off to avoid the error message about
// missing image links when InDesign opens an ad. This can especially
// be a problem when doing batch processes.
with(app.linkingPreferences){
checkLinksAtOpen = false; // checkbox: true/false
findMissingLinksAtOpen = false; // checkbox: true/false -
I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1
Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.
-
Can you trim top and bottom black from videos?
Hi
I have a project where I need to make all my video clips the same height.
Some of the clips are in widescreen, and I'd like to trim the black from the top and bottom so that I maximise the height of the footage.
Can this be done in elements, and if not, are there any programs that you can do that in?
Thanks for your time and help.
ShaunJohn,
Glad that you found it. I use it constantly, as I often animate my Titles with Keyframed Effects, and will just Copy/Paste Attributes to all. Same for Effects that are common to multiple Video (or Audio) Clips.
One caveat: when planning on use it, do one Clip with the complete Effects line-up, then Copy. Select all other Clips that you wish to Paste Attributes to. If you have already added some Effects, beyond the Fixed Effects, you will get multiple instances of that/those Effect(s), i.e. if you have already added Color Correction to the destination Clips, an have Color Correction in your source Clip, you will likely get 2 instances of Color Correction. Plan ahead, so that you do not have to go back and Delete any duplicated Effects.
Good luck,
Hunt -
How can I change the order (top to bottom) of toolbars
I've just upgraded to FX31. I have Classic Theme Restorer installed, and nothing too drastic has occurred. However, the order (top to bottom) of my Add-on toolbars has changed. How can I correct this ? I have tried disabling and restoring them, both singly and together but to no avail.
The toolbars are: Google Bar and Web Developer. I want Web Developer under Google Bar like it was before the upgrade, please.
I notice that although the Google Bar is listed on 'View > Toolbars' it makes no difference whether it's checked or not: it's always displayed unless I disable it as an add-on.
A minor matter, perhaps, but it's intensely irritating to have these things arbitrarily changed when there's an upgrade. I know I'm not alone in this.
Regards,
Tim DawsonYes, thank you, that did work.
I was a bit flummoxed at first because the extensions.ini file showed the extensions with unhelpful ID names like 'c45c406...........xpi'. But then I noticed that they were all listed in the Troubleshooting information with both plain text and ID, so it was possible to pick out the two that needed swapping.
I use my Fx browser a lot for web development and it's really irritating when the layout gets savaged by an upgrade, particularly when the upgrade itself seems to offer no benefits (except perhaps a security fix). -
Ghosting from top and bottom of the workspace edges when moving around workspace?
When I move around the workspace dark grey slightly transparent bars appear to be ghosting from the top and bottom of the workspace. If I move so they go off screen they disappear but more are made as I move around. Tried restarting Illustrator and my laptop, I have the newest version of Illustrator CC.
*Update - It appears to only happen in my one file, when an image I'm drawing over is put on a lower opacity. If I have it opaque there's no weird line ghosting, but as soon as I make it more transparent the lines start appearing.All I am doing is the following:
import my mov file that is 1024 x 820
create a sequence that is 1024 x 768
export the sequence
I made a video showing the steps (very boring, sorry).
I'm sure there is something simple I'm missing. i'm 99% sure my result is wrong from the looks of it in the movie player.
here is the video: https://www.dropbox.com/s/5wjs8p3v0sjh8uv/livewriterdemo_fromcamtasia_final.mov -
Side-by-side 2 monitor configuration changing to top-to-bottom
Hello all, I am at work and I am running an HP PC on Windows 7 with
2 monitors that are sitting side-by-side
physically.
The models are:
NEC EA243WM, and
HP ZR2440w
Both monitors connect to the same video card inside the HP PC using DisplayPort cables.
Both are set to run at maximum Resolution of 1920x1200 (recommended), and
Orientation is set to Landscape, with
Multiple Displays = Extend these displays.
So I get everything working in a manner that I need, which is side-by-side and there is a little picture above all of these settings showing the
virtual monitor arrangement as Monitor2 (on the left) and Monitor1 (on the right) it shows in a little picture as side by side. This setup of physical arrangement of the monitors in a side-by-side configuration works very well with the
virtual arrangement of the monitors in a side-by-side configuration for approximately 1-2 weeks.
Then on any given number of days later, the virtual monitor arrangementswitches to top-to-bottom, with monitor #2 on top and monitor #1 on the bottom. I discover this every
week by accident because I cannot move a small window from right screen to left, or left screen to right.
It has been going on for about 2 months now. I have already swapped the DisplayPort cables on the PC end around, I have not yet tested changing both cables to
hopefully known tested good cables; but, come on, do I need to do that?
I believe this problem is truly software based. Has anyone else observed this behavior? Could the video cables be causing this intermittent side-by-side to top-to-bottom changeup?
Please help,
WarronHi,
You can post in the following link to verify your account
http://social.msdn.microsoft.com/Forums/en-US/0093de19-224d-4f19-8eef-02e0cf1ece1b/verify-your-account-21?forum=reportabug
Since this is a brand new PC, then I suppose the video card inside is different from the previous one, or there's a compatibility issue, have you checked this issue with the manufacture, since they're more familiar with the specific product?
Yolanda Zhu
TechNet Community Support -
Get rid of the white space at the top and bottom of the report when Printing as PDF document
Hello All,
I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
margins for the report and it was 0in. Please help.
Thank YouHi There
In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
property of the report to “True”.
Please try to adjust your margins (top + side) and hopefully this problem will get resolved
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
If you have any questions please ask.
Many Thanks
Syed Qazafi Anjum
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
Maybe you are looking for
-
Pages 08 - Spell check as you type has stopped working
Hi, My Pages 08, which is ticked to 'check spelling whilst typing' is no longer checking spelling as I type. It was working fine yesterday, but has stopped today. Moreover, it's not even spell checking when I ask it to do it manually. Can anyone help
-
Sync. problem with from iPad2 to iTunes???
I've a problem with sync from iPad2 to itunes. I got the latest version of iTunes 10.5.2 and my iPad 2 is the version of ios 5.1. However, when I activate the sync. iTunes cannot process the sync. and it's locked. Is there anyone has the same problem
-
All facebook walls/info pages are BLANK...
using http://facebook.com/home.php (the actual site - not the app or the mobile version) i used to be able to view the contents of my walls & other people's/groups/etc as well. now, it is completely blank. i know i can use the mobile version to view
-
i was going for write exam 1z0-051,by this can i get any certificate or i have to go for 1z0-052 also? please help me?
-
Error when double clicking rdf file?
I'm using Reports 10g R2 on Windows XP Pro SP2. When I try to double click on a report file (ANMSC.rdf) the Report Builder starts, but doesn't open the report file. I get the following error: Windows cannot find D:\ANMSC.rdf. Make sure you typedthe n