Top N Chart where there are less than N series'
Post Author: acarey
CA Forum: Charts and Graphs
Hi guys,
I'm using CR XI R2.
I've got a report with a bar chart displaying the top 10 delays for peices of equipment. It works great but I have a display issue when there are less than 10 delays.
For instance, on my top 10 chart for a certain day, there are only 2 delays and it stretches the columns to take up the entire chart. I would like them to display as if there were 10 delays, ie have a fixed width.
Is there a way to enforce this?
Post Author: Dan3D
CA Forum: Charts and Graphs
Are you doing a horizontal bar chart or a vertical column chart?
Similar Messages
-
I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew PayzeAndrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John -
Business Scenario- We have a parent organization with 6 different Business Units.One BU requires 9 stages for for Opportunity(Tender) Tracking.The client requirement is to show the basic details of the tender at the header level and to show details specific to individual sales stage as different tabs.There will be multiple opportunity members added as opportunity team and will be responsible for capturing details specific to individual sales stage(tab). The Tab should be enabled and disabled based on the role. Reporting is required against each stage with specific fields of child objects against each opportunity.
We created multiple children entities under the oportunity(one to many mapping) but we are unable to add more than 3 child objects for a primary object for reporting purpose.
Kindly suggest what needs to be done to meet the requirementCan you provide the exact steps you took to "created multiple children entities under the oportunity" ?
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
How to use coditions where there are more than two options
I have a slide that gathers information from the user and
then makes decisions based on the values entered. On one slide i am
using the combo widget and listing 'Basic', 'Intermediate' &
'Advanced'. What I was hoping to do was use the Coditional
Structure as follows:
1. If Basic was selected goto slide BasicQuickQuiz
2. If Intermediate was selected goto slide
IntermediateQuickQuiz
3. If Advanced was selected goto slide AdvancedQuick Quiz
I can make this work for Basic or Intermediate, but I cannot
see how (or even if) I can have a multi level IF statement.
My work around was :
1. On a button added the logic:
If Basic, then got BasicQuickQuiz otherwise goto
IntermediateQuickQuiz
2. On Slide Enter event on IntermediateQuickQuiz:
If Intermediate then continue, otherwise goto slide
AdvancedQuick Quiz
This works, but seems clumsy - is there any other way this
could be achieved?
TimWhat I was hoping to see was the ability to create multiple
Else If statements within the one condition. I have changed this
now to add two Conditional Statements one after the other, but
still find this functionality to be lacking.
I will log a feature request to add a Select Case / Switch
style of fuction to this group.
However, given that this is new I am can live with the
workflow (for this version of Cp anyhow!!)
Tim -
I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xmlHi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
cursor c_mar_principle(b_entry in number, b_book in varchar2)
is
select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
from MARRIAGES mar
where mar.entry = b_entry
and mar.book = b_book
order by principle desc, id asc;
rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM := rec.surname;
:P16_FORNAME_GROOM := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE := rec.surname;
:P16_FORNAME_BRIDE := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed. -
Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?
check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer
-
I get an unable to contact server error when i try to sign in..I don't see where there are outages.
I am also having this problem.
I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error. -
There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent
i have informed the police but they said the device could
be tracked if it turn on by its depend on serial numbers
Re: There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent -
Revision: 11080
Author: [email protected]
Date: 2009-10-22 06:37:39 -0700 (Thu, 22 Oct 2009)
Log Message:
To cover cases where there are filters in the ancestry chain, we have to use our MatrixUtils sledgehammer to acquire the correct concatenated matrix.
QE notes: None
Doc notes: None
Bugs: SDK-23155
Reviewer: Chet
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23155
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/PopUpAnchor.asFYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989
-
Get only the rows where there are no matches in the tables
To include in the results of a join with no matching rows, you can use a full outer join. In MS SQL Server provides the FULL OUTER JOIN operator, which allows you to include all rows from both tables, regardless of the presence or absence of values.
You can add a WHERE clause in a FULL OUTER JOIN to get only the rows where there are no matches in the tables. The following query returns only those products for which there are no matches in the sales order.
SELECT p1.Name, p2.SalesOrderID
FROM TAB1 p1
FULL OUTER JOIN TAB2 p2
ON p1.ProductID = p2.ProductID
WHERE p1.ProductID IS NULL
ORDER BY p.Name ;
FULL OUTER JOIN is not supported in ABAP. How can you solve this?
Thanks in advance,
SerenaSimilar problems can often be solved by using subqueries, please have a look here and try applying it.
http://help.sap.com/abapdocu_702/en/abenwhere_logexp_subquery.htm
Thomas -
My software update seems to be stalled saying that there is less than one minute remainig but no progress is being made.
Any suggestions to resolve this problemReset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) Then try the update again.
-
I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
Am I billed for periods where there are no events?
Assume I have a dev/test scenario where there are long periods of time when I'm not actively testing my code. If I have running jobs waiting for input and there are no events, am I billed for that time?
There are two meters for which your Stream Analytics gets billed [1]
(1) Data ingressed by your streaming job
(2) CPU memory used by the running job
http://azure.microsoft.com/en-us/pricing/details/stream-analytics/
So if you are not sending any events you will not be billed for (1) but you will still be billed for (2) since you have a streaming job that is allocated and running.
You will have to STOP your job in order to avoid getting billed at all
Thanks
Zafar Abbas
Maybe you are looking for
-
Error while inserting value Qualified field in the main table
Hello, I am trying to populate Qualified field in the main table when a new record is inserted in the Products Repository. The field is Reference Price and its a qualified lookup field. I am using the below code to create qualified lookup value and c
-
Error while starting of Console
Dear All, I am getting given below error message while starting Console. Start Failed :2 Invalid Credentials. tell me the solution.
-
AddressBook groups lost after migration to iCloud
Hey everyone, just to share the solution with you. If bought my wife an iPad2 2 weeks ago and in order to allow for a smooth transition I upgraded her MacBook a week earlier to Mac OS X Lion and set up her iCloud account, i.e. I migrated her Mobile M
-
Mobile received no bill or box. Serial number starts with QR.
Mobile received no bill or box. Serial number starts with QR. I sent a broken iPhone to fix a Spanish company and was told it was beyond repair. They said that Apple offered me a new iPhone in exchange for mine and I accepted. I had to pay 200 euros.
-
Purchasing music from other stores.
Hi everyone: Is it possible to do it? I scroll down to select different store, but it logs me out. I can't download anything without changing my billing address but is there another way?