Top of head missing

Hello,
I am new to photoshop elements
have only one photo of my mam but the top of her head is missing how can I fix it
thankyou for any help.
robs sis

You can't.
Ken

Similar Messages

Header missing in SOAP message header (SAP XI Extension)

Hi Experts,
We are implementing interface MasterDataUpdateConfirmation_Out between 2 SAP ERP systems. The middleware is SAP PI.
SAP PI team requested a change in this interface Stack - Replace Stack ABAP by Stack Java. The changes were made.
However, now we get an error in the interface in the SAP ERP sender system, but the message arrives to SAP PI where is processed without errors and also arrives to SAP ERP receive system and the message is also processes without errors.
The error we have in XML message in SAP ERP sender system is:
XML element {http://schemas.xmlsoap.org/soap/envelope/}Header missing in
SOAP message header (SAP XI Extension)
Exception of class CX_XMS_SYSERR_PARSER
Can anyone please help us? We have no ideia what to do.
Thanks in advance,
RS

Hi again,
I don't know if it is important, but the communication is asynchronous and the sender system is SAP ECC 6.0.
Thanks!

Using InDesign CS6 onWindows PC. Apple icon and traffic lights in L top corner are missing.

Using InDesign CS6 onWindows PC. Apple icon and traffic lights in L top corner are missing and so are some of the editing features. I fixed this once before by accident but can't remember how I did it. All I remember is it had something to do with the veiw % in other applications - I think!

I've been using a tutorial that is obviously been done on a Mac.
I used to have a link somewhere that was basically a list of all of the differences between the two platforms, but I can't lay hands on it. I'm sure if you asked us about the features that were missing or broken, we could answer fairly easily - you know, like "Preferences are under the InDesign menu on a Mac, but in Windows they're under Edit."
The worst of these differences is in keyboard shortcuts - Macs have an extra modifier key, so whenever I switch platforms I always spend twenty minutes flopping my hands around and muttering uncomplimentary things about Cupertino and Redmond, at least until muscle memory takes over.

Desk top icons are missing

desk top icons are missing when i start computer

Hi annbrooks1. Sorry to hear about your trouble. I did some research and found some possible solution. Please let us know if this was helpful to you.
* http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/desktop-icons-all-display-internet-explorer-and/594daa9d-8fee-40a7-ba21-eeb353a713d2
* http://answers.yahoo.com/question/index?qid=20120218084122AAMVckT
* http://answers.yahoo.com/question/index?qid=20120218084122AAMVckT
Thank you

Top of header height

Wassup !
Easy question. I created an html_top_of_header and using the importing parameter (i_html_height_top) I defined the size 30.
My question is: There is a way to make it "freeze". In other words, after alv load the user can not change the size of top of header using the drag and drop tool.
Thx.
Usefull answers are always rewarded !

Freezing not possible if user use drag.
I have not found any attributes in class CL_DD_DOCUMENT
a®

MSPT/MACM status at network header - Missing Parts

I have a query with regards to how the MSPT(missing parts) status is set/unset at the network header level.
My question is why is the Missing Part status set to INACTIVE at the Network Header level when several components have the Missing Part indicator set.
The MACM status is set as ACTIVE instead at the network header level.

Dear Chandra shekar,
check for the production order type and plant combination in OPJK for business function 1 - material availability check during order
creation for the check box - check material availability during order creation and likewise for business function 2 - material
availability during order release and the setting for release material .
Kindly make the required setting after discussing with your PP consultant and go ahead.
Regards
Mangalraj.S

MIME header missing "filename=" results in BAD messages

I've been trying to track down several issues involving what appear to
be MIME handling issues. We are running GroupWise v7.01 (we have not
installed the "interim release" yet), and all components on the server
are at that release level (MTA, POA, GWIA, WebAccess).
One of the issues I am currently working on involves problems receiving
attachments from an outside sender. Their attachments are readable if
sent to an outside test account (i.e. - we've tested it with Yahoo
web-based mail, and a RoadRunner POP3 account using Outlook as the client).
The problem is that these e-mails either get dumped by the GWIA to the
GWPROB directory, or the e-mails go through, but the attachments are
corrupted (they do show up as attachments to the e-mail, but are
unreadable).
I haven't looked at why some e-mails go through and some don't, but I
did find out why the attachments are unreadable on the delivered
e-mails, and why the rest are just undeliverable. For whatever reason,
the sender's mail server (or AV gateway or whatever else had a chance to
touch the e-mail) is either not inserting, or is stripping out the
"filename=" from the MIME header just before the encoded attachment.
Adding this back into the message (by editing the original e-mail
w/header, and dropping the modified message into the GWIA "RECEIVE"
directory) fixes the attachment AND makes the e-mail deliverable.
Below I have an example of a bad e-mail which was originally sent to our
GWPROB directory, but was successfully delivered with a readable
attachment through a separate POP3 account (RoadRunner). Following this
"bad" e-mail example is the "fixed" version of that same e-mail, which
was delivered successfully to our user, with the attachment also being
readable.
*************** This is the original "BAD" e-mail ***************
MAIL From:<[email protected]> SIZE=73686
RCPT To:<[email protected]>
Received: from test.rr.com ([65.xx.xx.xx])
by smtp.ourhost.com with ESMTP; Wed, 21 Feb 2007 15:28:27 -0500
Received: from local.com (rrcs-24-xx-xx-xx.central.biz.rr.com [24.xx.xx.xx])
by test.rr.com (8.13.6/8.13.6) with ESMTP id l1LKSFTm009106
for <[email protected]>; Wed, 21 Feb 2007 15:28:24 -0500 (EST)
Message-Id: <[email protected]>
From: [email protected]
To: [email protected]
Date: Wed, 21 Feb 2007 15:25:54 -0500
MIME-Version: 1.0
X-Mailer: Telexis Gateway
Content-Type: multipart/mixed;
boundary="Mark=Num1_Lev1_2007221202554265_Tlx"
X-Virus-Scanned: Symantec AntiVirus Scan Engine
--Mark=Num1_Lev1_2007221202554265_Tlx
Content-Type: text/plain
Content-Transfer-Encoding: Quoted-Printable
This is a test
-Test Sender
--Mark=Num1_Lev1_2007221202554265_Tlx
Content-Type: application/vnd.ms-excel;
name="1st Q 2007 Income to Budget.xls"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
"1st Q 2007 Income to Budget.xls"
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAAZgAAAAAAAAAA
EAAA/v///wAAAAD+////AAAAAGUAAAD/////////////////////////////////////////////
--Mark=Num1_Lev1_2007221202554265_Tlx--
************** END OF BAD E-MAIL **************
*************** This is the "fixed" e-mail ***************
MAIL From:<[email protected]> SIZE=73686
RCPT To:<[email protected]>
Received: from test.rr.com ([65.xx.xx.xx])
by smtp.ourhost.com with ESMTP; Wed, 21 Feb 2007 15:28:27 -0500
Received: from local.com (rrcs-24-xx-xx-xx.central.biz.rr.com [24.xx.xx.xx])
by test.rr.com (8.13.6/8.13.6) with ESMTP id l1LKSFTm009106
for <[email protected]>; Wed, 21 Feb 2007 15:28:24 -0500 (EST)
Message-Id: <[email protected]>
From: [email protected]
To: [email protected]
Date: Wed, 21 Feb 2007 15:25:54 -0500
MIME-Version: 1.0
X-Mailer: Telexis Gateway
Content-Type: multipart/mixed;
boundary="Mark=Num1_Lev1_2007221202554265_Tlx"
X-Virus-Scanned: Symantec AntiVirus Scan Engine
--Mark=Num1_Lev1_2007221202554265_Tlx
Content-Type: text/plain
Content-Transfer-Encoding: Quoted-Printable
This is a test
-Test Sender
--Mark=Num1_Lev1_2007221202554265_Tlx
Content-Type: application/vnd.ms-excel;
name="1st Q 2007 Income to Budget.xls"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
filename="1st Q 2007 Income to Budget.xls"
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAAZgAAAAAAAAAA
EAAA/v///wAAAAD+////AAAAAGUAAAD/////////////////////////////////////////////
--Mark=Num1_Lev1_2007221202554265_Tlx--
************** END OF "FIXED" E-MAIL **************
The only change I made, which both allowed the above e-mail to be
delivered and made the attachment readable, was the addition of the
"filename=" just before the file name on the line after the
"Content-Disposition: attachment;".
I did the same test with an e-mail that had the same "filename="
missing, but somehow was successfully delivered to our user (again, the
attachment was unreadable). Adding the "filename=" into the resent
message did make the attachment readable.
I haven't looked to see if the sender's system is actually non-compliant
for excluding the "filename=" (I will be doing that later this evening),
or whether this is a GWIA problem for not being able to handle this. I
just wanted to throw this out there to see if anyone else has seen this.
Does the "interim release" update by chance fix this?
Thanks,
Greg Niese

Does this email come in directly to GWIA (or do you have a relay host in
between)? I must say I've never experienced this problem on any of the GW
systems I administer. Could you tell us what domain this is coming from?
Ted Kumsher
>>> On 2/23/2007 at 8:21 AM, in message
<[email protected]>, Greg
Niese<[email protected]> wrote:
> I agree that this shouldn't be accepted as a valid "filename parameter"
> line. There are two ways to "not accept" this invalid parameter: "stop
> processing" the e-mail because of the problem (discard the e-mail), or
> discard the bad parameter and continue processing the rest of the e-mail
> (this could only work when the parameter is optional, as in this case).
> The GWIA seems to take the route of "stop processing", and then moving
>
> the resultant "bad" e-mail to the GWPROB directory.
>
> I say "seems" because in many cases where this occurs the e-mail doesn't
> get sent to the GWPROB directory, but instead still gets through the
> GWIA to the user. The attachments are corrupted, but still show up
> correctly in the attachment window, so everything seems OK with the
> e-mail & attachment - until you try to open the attachment.
>
> If there is a semi-colon after the "Content-disposition" type, the GWIA
> should see a valid disposition parameter following. But if it sees an
> invalid parameter, as in this case, what is the GWIA doing? It must
> either be discarding the invalid parameter, or "uses" it by either
> incorrectly parsing it as part of the header, or lumping it in as part
> of the attachment. If it "uses" in any way the invalid line of data -
> that sounds like the definition of "accepting" it, isn't it?
>
> To test whether the GWIA is actually using, and therefore "accepting",
> this bad parameter, I simply removed the malformed parameter (having the
>
> line in or out shouldn't matter if the GWIA's not using it), and I tried
>
> this both with the semi-colon removed from the end of the
> "content-disposition" type, and with that semi-colon left in place. In
> both cases the GWIA properly processed the e-mail and the attachment was
> readable! What does that mean? If the GWIA was truely NOT
> using/accepting that invalid header parameter (i.e. - the GWIA discards
> it), then the e-mail and attachment should go through OK. Since this
> isn't what happens when the bad line is left in place (the attachments
> DO NOT come through OK, but the e-mail often does get to the user's
> mailbox), then the GWIA must be accepting that bad parameter as either a
>
> part of the header, or a part of the attachment.
>
> I suspect that in those cases that these e-mails are sent to the problem
> directory, instead of being delivered with a corrupt attachment, the
> GWIA isn't really recognizing that the optional disposition parameter is
>
> "bad". The reason for the e-mail going to the problem directory is
> probably due to an error while trying to decode the attachment if the
> bad parameter is treated as part of the attachment, or if part of the
> attachment is being lumped in with the malformed parameter as it is
> parsed.
>
> I agree that how the GWIA should go about "not accepting" bad header
> parameters may be debatable (assuming that the GWIA were actually
> halting processing of the e-mail when this type of problem is found, and
> then sending the e-mail to the problem directory every time). But in
> cases such as this, since the parameter itself is optional, it would
> seem that the better route would be for the GWIA to discard the
> parameter and continue processing, instead of "discarding" the whole
> e-mail (to the problem directory). "Discarding the bad parameter" seems
> to be what is being done by at least a few other competing SMTP agents,
> since the other mail systems I tested with did get the e-mail through
> without corrupting the attachment.
>
> I may suggest that the sender's company fix whatever is going on at
> their server, but it probably won't do any good (I've already been told
> that they don't experience this problem with anyone else). In the
> meantime, my user (yes...he is the CEO), will have to continue to have
> some important e-mails sent to one of his personal accounts, because
> those e-mail systems receive these e-mails fine, but our GroupWise
> system can't.
>
> :-(
>
> -Greg
>
>
>
> Michael Bell wrote:
>> No it shouldn't, IMO.
>>
>> It's a matter of interpretation, of course. But GWIA is 100% right in
> not
>> accepting this as vaid (that part is beyond any debate - it's in the
> RFC).
>>
>> The only part that can be debated is "should GWIA then pass the buck"?.
> In
>> olden days, many would have said yes.
>>
>> But In general, no. Moving away from Postel's law, which was formulated
> in a
>> pre-malware age, is pretty much needed. Tight specifications and
> pickiness
>> is good. Collateral damage is unfortunate, and of course one needs to be
>
>> flexible if this is a widespread issue (which frankly, it is not in this
>
>> case), but otherwise it is up to to sender to fix their issue.
>>
>> 90% of viruses and malware in the last 6 years (and I'm well aware of
> them,
>> working in the email security field) are from MALFORMED e-mail, that the
>> gateway and client misinterpreted. Many of these were MS issues, but
> that's
>> another point. Point is you have to be STRICT.
>>
>> In this case this violates the generic MIME RFCs which state that if you
> do
>> have parameters, they all gotta be separated with semicolons (PASS), and
>
>> have to be name=value pairs (FAIL).
>>
>>
>> "Greg Niese" <[email protected]> wrote in message
>> news:[email protected]...
>>> Well, according to RFC 2183, the "filename=" string has to be present if
>
>>> the Filename parameter is going to be used. So the sending host seems
> to
>>> be "broken" in that regard.
>>>
>>> My next question then is: Should the GWIA ignore the "stray" file name
> in
>>> these e-mail headers, instead of allowing it to be lumped in with the
>>> attachment (I'm assuming that's why the attachment is trashed)? It
>>> appears that other systems are able to do this.
>>>
>>> -Greg
>>>
>>> Greg Niese wrote:
>>>> I haven't looked to see if the sender's system is actually
non-compliant
>>>> for excluding the "filename=" (I will be doing that later this
evening),
>
>>>> or whether this is a GWIA problem for not being able to handle this. I
>>>> just wanted to throw this out there to see if anyone else has seen
this.
>>>>
>>>> Does the "interim release" update by chance fix this?
>>>>
>>>> Thanks,
>>>>
>>>> Greg Niese
>>>>
>>
>>

Top Tab is Missing

All at once, my top status bar in Safari which lists File, Edit, View, etc. is missing. Also missing is the red button to close the page. I have tried looking up information in Help but can't find out how to restore this line.

You might have entered Full Screen mode.
Exit Full Screen mode.
Press esc key, top left most key in the keyboard.
Or move the mouse to the top of the screen and click the blue double arrow icon at the top right of the window
from the drop down.

Server Side Include (SSI) for Top Border (Header) Menu

Following-up on a previous post, I have created a test menu for my test page so that I can make a change once in my website menu and have it automatically populate throughout the site.
So, I created the menu as a file, "Aloe_Top_Menu.asp" (it is using DW's Spry Menu 2.0 and I am using DW CS5) saving it as an .asp file.
When I then insert it anywhere on my test page (see line 150 on the page: www.aloe-vera.org/test.htm ) it does not appear.
I have put it in the <head></head> area as suggested by another user (Nancy, thanks for all your help btw). In between the body tags. Nothing seems to work.
I've also tried it in what would be the "header" area of the page, nada. So I tried in the regular content of the page. Nothing there, either.
It's frustrating beyond belief. And I sure wish the good folks at Adobe would have made it so one could work on it in "Display" view. Alas, I can work in code only view just fine. But don't want to spend needless hours on it, if I cannot get it to appear on the uploaded site, at the top of each page!
For suggestions, I am "all ears." Thanks, David

Your menu include file should contain nothing more than a list of links. That's it. Very simple. And links are relative to the parent page.
You can name include files anything you wish. menu.foo menus.ssi or menu.whatever. The extension doesn't matter here.
Your parent page -- the page on which your menu will appear, needs to be named index.asp to tell your server to parse content from the include file.
<div id="menu">

</div>
Finally, your parent page must contain all the supporting CSS files, scripts and functions to make your Spry Menus work.
Does this make sense?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Header Missing in Hyperion Workspace

Hello,
I am having a problem with the header of my report in Hyperion Workspace. When I do a preview is designer the header appears with no problems, however, when I run the report in Workspace the header does not appear. Any suggestions?

Hi,
Maybe check the position of the objects/grids on the report to make sure one isn't positioned over another or that one object is set to Top and Left (therefore having precedence over the other objects).
Maybe also check to see that you don't have extra returns in the header code as that can sometimes push the title to be hidden.
Cheers, Iain

ODI Web Service Soap Header Missing Error

I am trying to invoke oracle crm ondemand web service using ODIInvokeWebService tool by providing the below parameters
Url
Port Type
Operation
XML Request
HTTP User
HTTP Password
I am getting the below error during the execution of the step.
javax.xml.ws.soap.SOAPFaultException: Invalid Soap Request : Soap Header is missing
     at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:189)
     at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
     at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:187)
The code which is getting executed is
OdiInvokeWebService "-URL=http://slc402454.us.oracle.com:30090/Services/cte/FieldManagementService?wsdl" "-PORT_TYPE=FieldManagementService" "-OPERATION=FieldManagementRead" "-HTTP_USER=Upgrade_all/sales" "-HTTP_PASS=aYyHL7THHZYEdPNTd.1ugy"
<?xml version = '1.0' encoding = 'UTF8'?>
<WL5G3N1:FieldManagementRead_Input xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:WL5G3N1="urn:crmondemand/ws/odesabs/fieldmanagement/">
<apQuery:FieldSet xmlns:apQuery="urn:/crmondemand/xml/fieldmanagement/query">
<apQuery:ObjectName>Account</apQuery:ObjectName>
<apQuery:IncludeAll>true</apQuery:IncludeAll>
</apQuery:FieldSet>
</WL5G3N1:FieldManagementRead_Input>
With SOAPUI , I am able to get the response.

After mentioning the SOAP header and response file as XML with other properties , I am able to successfully retrieve the SOAP response.

OSB - Content length http header missing from business service out message

Hi all,
I am having some diffuclty with a business service in OSB. I created the business service from the wsdl and created a regular proxy service that just routes to the business service. When i run the test console i get the below fault.
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: Length Required</faultstring>
<detail>
After some debugging i find that the content length http header is missing from the outbound message the business process creates and sends to the acutal web service which sends back the http 411 fault.
Does anyone know how to configure the message flow of my proxy service to ensure that the outbound message sent from the business service contains that content length http header or any suggestions on how to fix this issue will be appreciated.
Thanks

Disable the "Use Chunked Streaming Mode" property in HTTP Transport Configuration of your business service. By default it remains enabled.
Regards,
Anuj

Top line suddenly missing from display - where did it go? how can I get it back? Don't have finder, time and date, options...

Top line is suddenly missing: no finder, no options, no date and time or wifi status, no time capsule to return to previous settings! Can't figure out what happened.

You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
You always need to have a backup, an iPhone is not a storage device.
When you get a new computer you need to transfer your library before syncing
If you don't have a backup you may be out of luck
The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
http://support.apple.com/kb/ht2519

HT2474 the 3 buttons on the left top corner went missing i.e delete(X), minimize(-), maximize(+)

my computer macbook air version 10.7.5 recently have the 3 top left corner went missing as if the whole horizontal bar were lost and I cant close the file on safari. also the remaining top remaining bar where the apple logo needs to be pull down every time i need to clear history.

Thank you for your reply, I understand about the diagonal arrow on the right side but like I said the whole 3 button including the diagonal arrows are missing ( the whole horizontal bar consisting of them).

ITunes top menu bar missing?

Hello All,
This may sound like a dumb question however I have tried everything, I think. The little bar at the top of iTunes which has the green, yellow, and green dots to minimize, maximize, and close as well as the play and next track buttons are missing from iTunes. They were there on this computer last week so I am assuming it is something I did. I also am unable to move the iTunes window around my desktop, like all other applications. This is only a minor inconvenience however with this top bar missing, I also do not have the search option for iTunes store.
Any ideas?
Thanks in advance:)

It sounds as if your iTunes window got moved up until it is off of the screen. Change your display resolution until you can see all of it and move it. Then change the resolution back to the preferred setting.

Top of head missing

Similar Messages

Maybe you are looking for