TOP of Page doesnt come up properly in the second document printing

Dear Experts,
Currently i'm developing Purchase Order Form using Sapscript. Actually i copied from the standard PO Form 'MEDRUCK' and made some modifications.
The printer type i'm using is Lexmark 4227 Plus.
I already set the Top Of Page in the Printer.
1. Before printing the 1st PO, I push the button 'Start' in the printer,
so the continuous paper will go in the correct start position
( correct Top of Page).
2. I print the first PO, it's ok for all pages ( can be more 1 pages ).
3. When i print the second PO, the paper wont go to the correct start position ( correct Top of Page ). Basically it can be adjusted manually by pressing the button 'Start', like the point 1.
But, practically more than 1 user will print their PO almost in the same time. So it's not possible to manually adjust the paper position everytime their will print 1 PO document.
Please advise.
Regards,
Hary

To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access the about:config page. 
*Use the Filter bar at the top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) or by double-clicking the line with the pref
See also:
*http://kb.mozillazine.org/about:config

Similar Messages

TS1702 I wish to save a multi page document sent by e mail as PDF in Pages - it only files the first page? How do I save the entire document ?

I have Pages on my iPad, which is brilliant....but when I want to save a multi page file sent to me by e mail, pages only saves the first page. How do I save the entire document?

What type of document is the file? (ie. what is the file extension for tie file?)
Regards,
Barry

My firefox will allow me to open a page then it gets stuck on the second page and times out--how do I fix this. I have checked the sites on Explorer -it works

It started with the second page not being able to be displayed
example it would go to yahoo and I would sign in but the next page would just spin and time out
Now it won't even go to the first page.
Firefox will not let me go into the options to change cache.
I am trying explorer and it works.
Help

This is a page within the Yahoo site? When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In that dialog, you can individually remove your yahoo.com cookies.
Then try reloading the page. Does that help?

When closing 2 windows(with multiple tabs each), system restore does not properly restore the second window's tabs. Is this a bug in the new update/any ideas to fix?

I regularly use 2 windows with multiple tabs each and session restore would work to get them all back, but after this latest update the second window does not restore properly, with the first tab not visible on top(only in drop down menu) and the add a tab button now on the left(instead of right). The add a tab button is not really concerning other than it indicates other problems with the tabs on tab of the 2nd window. Not having the 1st tab visible is frustrating, because I can not move it or as easily navigate. Also, the tabs on top of the 2nd window that are visible no longer have the "x" to close visible unless that tab is selected. I'm assuming this is a problem with the new release/update, since this is the first time I've ever encountered the problem, and I've shut down and restored Firefox a few times to make sure this was a recurring problem and not a one-time deal. Any ideas on how to fix would be welcome(other than perhaps cramming my tabs onto one window or sucking it up XD).

Hi,
You can try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.
If the problem persists, please try a [https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s new profile]. You can later copy [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s needed data] from the old profile to this.
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

Different Page Sizes within the same document - Printing

I am having trouble printing a document which contains pages of different sizes (using Adobe Professional 7.0):
i.e. The first 10 pages are 8.5" x 11", the next few pages are 11" x 17" and the last few pages are 8.5" x 11"
The printer only spits everything out as 8.5" x 11" and the larger sheets are just cut off.
In the "Print" menu that comes up when you hit FILE->PRINT it suggests that everything is alright... I can scroll through the small "page preview" and it shows some pages 8.5x11 and some pages 11x17... but when it actually prints, it doesn't do that. Is it the printer that is the problem perhaps?
(The printer is a Lexmark x945e)
Any insight would be greatly appreciated.
~Paul

If the goal is to make a flap, then you can do this in InDesign. A spread can be any contiguous number of pages, so if your document is generally speaking double-page spreads, you can have a single spread that is composed of three contiguous pages.
To do this, in the Pages palette, select a double-page spread you want to expand. Go to the flyout menu and deselect "Allow selected spread to shuffle." Then drag new page to the left of the left page or to the right of the right page (depending on where your flap is).
Then you're all set.
Here's a screenshot of the Pages panel:
In this case, I've created a flap to the right of page 3 (numbered page a) and its reverse to the left of page 4 (numbered page b).

I have a hp psc 750 why does my second sheet come out first and the second sheet comes first

I have a HP PSC 750 printer and when I type a message 2 sheets long, the second prints out first and the second sheet comes out first, can you help?

@paddyv, Welcome to the Community!
You should have the option in the program you're printing from, to change the page order. Check the settings in the program.
If you cannot find the options, please let me know which program and operating system you're running and I will have a look in to this for you.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Use page numbers starting with 1 on the second page

I have a document in Pages 09 that I need to have a title page. This page should have no page number so the numbers start on page 2. I have managed to get rid of the page number on the first page, but Pages keeps starting the numbers from 2 on the second page. I tried to set "Start at:" to 1, but that did have no effect. Is there any solution?

From Vallauris I can't guess what but clearly, you forgot something !
Compare your settings with these ones.
Yvan KOENIG (VALLAURIS, France) vendredi 1 juillet 2011 14:00:35 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Have downloaded a driver for my printer ( Canon Pixma ip 4000) from suggestions on this page. It works up to the point of printing but then nothing happens. Can anyone help?

Have downloaded drive from my printer ( Canon Pixma ip4000) to my new macbook air. Used a driver as suggested in previous correspondence in this support group. It downloaded but it does everything up to the point of printing then it stops. Any suggestions?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

When iam on web sites i get blank page that says:http redir.php?id=4 at top of page, and it blocks me off the site. how can i stop this ?

this comes on some web sites i am on: http66.197.21/redir.php?id=4, and then the site goes to a blank white page blocking the site. how do i stop this from happening?
== URL of affected sites ==
http://

View --> Show Toolbar

Error while calling the com object to open the word document.

Below is the error: Though it says the insufficient memory,
we have enough memory on the server and it is avaialable. I have
checked the server statistics and cpu usage too.
Error also talk about CF_COMPROXY and I am not sure about
this. Has any one seen this before or does anybody has any
solutions for this.
Detail The cause of this exception was that:
AutomationException: 0x800a13e9 - There is insufficient memory.
Save the document now. in 'Microsoft Word'.
Message An exception occurred when executing a Com method.
RootCause struct
Code 2148144105
Description There is insufficient memory. Save the document
now.
Message AutomationException: There is insufficient memory.
Save the document now.
Source Microsoft Word
Thank you all in advance.

What version of Word do you have installed? Are you trying to
save it as
another format?
This could be completely unrelated, and the only reason I ask
is because I
get that same "out of memory" error (without the com part) if
I try to save
an invoice from MS Money 2005 Small Business as a pdf using
Cute PDF Writer.
It will also throw an error when trying to save an invoice
template if the
printer is assigned to PDF Writer. Now I use Flash Paper to
save them as
pdfs. I still get the error when trying to save a template,
but at least I
can now generate the pdf.
The only reason I mention it is because it makes me think
there is something
in MS product that is trying to prevent you from using non-MS
formats. I
could be way off and, honestly, I have no clue what is
causing the problem,
but is seemed too similar to be a coincidence so I thought I
would pass it
along just in case.
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technology, Inc.
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"t_sam_2000" <[email protected]> wrote in
message
news:[email protected]...
> Below is the error: Though it says the insufficient
memory, we have enough
> memory on the server and it is avaialable. I have
checked the server
> statistics and cpu usage too.
>
> Error also talk about CF_COMPROXY and I am not sure
about this. Has any
> one
> seen this before or does anybody has any solutions for
this.
>
> Detail The cause of this exception was that:
AutomationException:
> 0x800a13e9 -
> There is insufficient memory. Save the document now. in
'Microsoft Word'.
> Message An exception occurred when executing a Com
method.
> RootCause struct
> Code 2148144105
> Description There is insufficient memory. Save the
document now.
> Message AutomationException: There is insufficient
memory. Save the
> document
> now.
> Source Microsoft Word
>
> Thank you all in advance.
>
>

I have a macbook pro using version 10.7.4 and I can't print multiple size pages in a pdf file using the brother laser printer hl-5470 dwt

I have a Macbook Pro using the 10.7.4 version. I recently bought a Brother HL-5470DWT Laser Printer. I can't seem to tell the printer to print multiple size pages in my pdf files.
No matter what I do it still prints all the documents as 8.5x11! It isn't pulling the paper from both printer trays.
Please Please help me out....
deb

Contact Brother tech support.

If I highlight text in a pdf, all the text on the page disappears when I next open the saved document. How to retrieve my text?

When I use the highlight tool in a pdf document and then save the document, the next time I open the document the highlight is still there, but the whole page does not contain any text anymore. Totally blank. How do I retrieve my text?

Well, you need a PDF viewer – and that would be Adobe Reader.
Those parameters only work for web-served documents, not for local ones.

Running executable as a service, the front panel doesn't display properly upon the second logon.

I am running a LabView executable as a service. When I logon the first time, I see the front panel correctly. When I logoff, the service still runs properly. If I logon a second time, the frontpanel never fills in. (I see the desktop through the front panel). The service still runs, but when I click on any menu, the computer freezes. Any suggestions? (Other than not logging on twice)

Hi chach,
I hate to say it, but I'm surprised it even runs once. If you check out:
this link
It says the following:
"The service must run without a user interface."
As the article mentions, you could still have a separate front panel that communicates with the service, but the service itself probably doesn't have an accessible front panel.
Joe Z.

Alv-top-of-page

Hi all,
In my alv report,when Iam executing top of page is shown only once,but when Iam checking print preview it being dispalyed twice,when Iam comming back to normal view it is shown 4 times.
why Iam getting this type of error.can any one tell me what may be wrong.
regards.

hi,
think you are not refreshing the data
try to clear all the work areas and refresh all internal tables
shiva

Pdf file will not come up properly

Dear Sirs:
My daughter sent me her w-2 and 1099's through the IPHONE, and one of them did not come through properly. The pdf came through, but it was blank.
When I went to my laptop PC and downloaded the 1099 it came up correctly with infomation inside the boxes. But it came out blank with either the Iphone or IPAD2.
I think there is a problem with the pdf add in inside the OS 5.01, because later I was experimenting and had downloaded a free PDF app, and opened the 1099 in that, and it was NOT blank. There were information inisde the boxes, but the boxes were blue.
So please fix this bug. Thanks.
Ken Basche

works ok for me, although I do seem to recall a thread about this, and a fix - registry setting or preference or something maybe...
At the risk of hijacking your thread, if this is a known problem with a known fix, it would seem ripe for the "known issues" page. I think one reason Adobe does not have such a page is they've depended on this forum for such stuff, which if you're willing to slog through a bunch of unrelated stuff and/or misinformation, has a wealth of knowlege. Likewise, there are a bunch of unpaid Lightroom enthusiast idiots (I was hoping I could get away with that since I consider myself one of them) who hang out on this forum just to help people like you...
Sorry if I didn't help much this time...
R

TOP of Page doesnt come up properly in the second document printing

Similar Messages

Maybe you are looking for