Topic : Alesis Master Control Problem (to previous post unanswered fixed)

Topic : Alesis Master Control Problem to the original post user: Garrud
Me:111984cz i have an answer to ur problem.i too had the same problem with cubase 5 ,Nuendo 4 and any of Steinberg softwares with the alesis master-control studio interface. i hope u run into this to learn my fix.
the problem is check ur midi input on your actual track.make sure it says to (master-control midi port) and not (all midi inputs).as for your device manager settings set to (master-control port) don't set your midi to all or master control port as it will interfere .now it will work perfect.this is for all who have the same problem as well.hope this helps many as i spend a lot of hours of trouble shooting.i almost thought there was something wrong with my mixer.have a great day guys!!
Original post:
I've installed the MasterControl driver as instructed and followed the logic set up instructions provided with the MC and all that seems to happen is the Controller acts as a midi keyboard playing different notes rather than the intended function.
e.g if i touch one of the faders it plays a high pitched note and if i move the fader it acts like the note is being pitched, like a pitch bend function on a keyboard.
Very strange...cannot figure out whats going on
PLEASE HELP I'M GOING INSANE
MacBook Pro Mac OS X (10.6.4)

I too had the same problem and resolved it.
However, I have had nothing but issues with the Alesis Mastercontrol since it arrived last week. I purchased mine second-hand as a replacement to a Fire-Wire / Analogue mixer made by Mackie (Onyx 1220). A fantastic amp, but not a control surface.
I decided I wanted an all rounder, plus something I could place in-front of my iMac so I could work on the fly.
So...
1) Alesis Mastercontrol
2) 1 x Rode microphone in Ch1
3) 1 x Rode microphone in Ch2
4) Peavey guitar in Ch3
I use Logic Studio Pro 8.
I finally figured out how to get the Alesis to behave and interact with Logic. So far so good!
I then ran into a series of issues that are frustrating me.
I cannot get the microphones to mute properly (I would also complain about the poorly position gain dials at the back of the unit for the microphones. So poor indeed that I have purchased an Art mic preamp to slap into the back (not arrived yet) and by-pass the rear controls).
I also cannot get my semi-acoustic Peavey to record at all. I can hear it through the control desk, but it is much lower than expected and I am getting nothing when I try to record). In record mode the pair of mics record and I can't get the 3rd channel to operate, although it looks like it's functioning on the screen. I try MUTE / SOLO and selecting the correct channel, but nothing!
All I can do is record myself playing guitar through the mics I cannot switch off.
Strange machine! Almost wishing I'd not sold my Mackie Onyx 1220 so swiftly.

Similar Messages

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Previous Post ( v4l, opencv and Webcam issues )

I feel like this is probably a better location for it than the last place because I have recently reasoned it is more of a programming issue. (If so can someone move it?)
I've been struggling with this problem for the last couple days. I can't get opencv (c) to work with my camera however I can get the opencv (python) to work. I find it odd because I figured it was almost an identical library. Anyhow, this is my previous post.
http://bbs.archlinux.org/viewtopic.php? … 99#p629099
Any help would be greatly appriciated, for I have not found many people experiencing this issue.
Thanks,
Brian

So. what is the status of your project? im very interested in some simple app to control window focus of my tiling wm using webcam head tracking.
Write me a pm, plox

Previous post

I previously posted about slow download speeds and have since retested my connection and found im only getting around 5mb on my line.....seems low but is this normal??? i live close to the centre of swindon, wiltshire

in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

TV@nywhere master. video problem

hi. i got the tv@nywhere card for my wife for xmas & it was working fine until recently when all of a sudden when recording a clip from the dvd/vcr & she goes to add it to the project she's working on it opens only as a mpeg sound clip??? all was fine, now this. i tried the uninstall/reinstall deal, with no luck. i got the updated driver via an e-mail from intervideo and again, no luck. i know my system can handle it. any help would be greatly appreciated. thanks. take care all
rick....
amd athlon xp 1700+
512mb sdram
40gig HD
radeon 9000 video

Patience Yuz this forum has no input from MSI so you have to wait until someone, somewhere else in the world is awake.
Regards to MSIPVS yes it is awful and there has been quite some discussion within this section of the forum and the survey section as to the problems with this software. It is not only MSIPVS that is at fault the drivers also need some work. On some PC`s MSIPVS causes crashes but by far the biggest complaint is the poor display. Also MSIPVS or the card/drivers not sure which, will not remember it`s locale, every time it is started it will go back to the default in my case it seams to be PAL_B and some times to NTSC my locale is the UK and the TV setting should be PAL_I but getting to stay on PAL_I is a big problem. It makes it hard to schedule a recording as it will probably start in the wrong format. I agrre with you that feeware software is better than MSIPVS.
Thanks to your previous post I can confirm that you have sorted the remote`s missing functions.
Now all we need to get the drivers and MSIPVS sorted.

Re-open the Previous posting period

hi...
we have closed the posting period for the month of 01-02(april-may) and open the 03-04(june-july)...
but now we want to open the previous posting period i.e. 01-02(april-may) again...so how could we do this..
one solution i have got is that...
1. go to OX18 delete all the assignment for that company code and plant.
2. go to OMSY and change the posting period..
3. go to OX18 and reassign the plant and company code again...
this is the right method to do that..?
will there be any -ive implications if I open the previous period by this procedure..?
or suggest me some other way to do that...
Thanks in advance

Hi
You can open Closed MM periods but be careful because SAP does recommend opening closed MM periods.
Steps are :
1) Tcode MMPI --from Tool Bar select - System - User Profile - Own Data - In parameter Tab Enter "MMPI_READ_NOTE" in parameter Field.
Try to remove assignment of plants from company code.
Now Go to -
T-Code OMSY & Set the required Period.
Re-assign Plants to Company Code & Check whether correct preriod is open thru T-Code - MMRV
Now use T-code - OMWD to Assign Valuation grouping code to Valuation area because the earlier data gets deleted when assignment of Plants was removed.
Use the transaction code OMS2 then select FERT (or any other Material Type used by your company)
Then click on the quantity and value update.
Select your plant or valuation area and put Tick Marks in Value update and Quantity update
Even check this link...Reopening the posting period that was closed
This will definitely reslove your problem.
Thanking you.

BlackBerry World not accepting VISA card -- follow up to my previous post

Re purchase of an app for new Z10 -- main software all successfully updated to most recent. Well, I posted last time about being escalated up through the ranks of BlackBerry software helpers from Bell, and after several levels getting a very easy-to-communicate-with woman from BlackBerry in Halifax, NS...
She told me Bell would bill me for the apps on my carrier bill, and I told her No, they told me they didn't do that, not in Victoria BC my home town, anyhow. I asked her to call and contact them... she said she did, and said Yes, they would. So I set that up on my BlackBerry World sign-in page using my computer, under her guidance, and it seemed to be set up. I even purchased an app that way successfully, afterwards... [She told me at the time that yes, there was a problem with the tool that handles VISA payments, sometimes...]
BUT, several days later when I went to do the same thing again with another app, well, I had a message in red on my purchase screen on my Z10 that carrier purchase was not available!
Ahem.
So, I tried purchasing via VISA again [read my previous post, I called VISA, tried to see if there was something wrong there, no there wasn't]. No form of my re-entering my VISA card or editing it etc. would work.
So I tried PayPal, over the past weekend I established a PayPal account to be paid for via my same VISA card, that took some doing as the procedure is not that clear on their website and you have to explore the sections under "my money" etc. to see just what is going on with it... without any warning or info from either BlackBerry or PayPal the account wouldn't work [refused several tries to purchase an app] until a special method for BlackBerry was posted in that "my money" section on PayPal, they call it a prepayment account or something like that, it takes about an hour or two on a Sunday for that to appear for a new account, and then [I was doing this via my computer after signing in to PayPal] I saw a side message that this purchasing procedure would not work until August 12th.
Today, August 12th, I just purchased a trial app, Medieval Ringtones, and that went through! Unfortunately I was on just our own house WiFi [good signal, I thought at the time, though], and just before it got installed something said "network problem" and it stopped installing. Now I can't buy it again either, I'll try later just to see if it reloads -- it wouldn't reload to the purchase point. I don't really care, it was an experiment. I just downloaded a free app, Top 500 Ringtones, from BlackBerry World, and that went smoothly and seems great, lots of choices, most of them free as far as I can tell.
Warning to users: I would establish the PayPal account via BlackBerry World's own access point on the computer, first, through the BlackBerry World website, clicking on their PayPal symbol, before trying to purchase via PayPal, as establishing a PayPal account first, independently, may lead to confusion if you establish it outside of BlackBerry World.
Now, I have noticed the work-around posted by a BlackBerry Forum guru here on using a dummy VISA account, this helpful person provides a list. WOULD THIS HELPFUL PERSON PLEASE EXPLAIN THE PROCEDURE IN DETAIL? i WOULD HAVE NO IDEA HOW TO DO IT IN PRACTICE -- APPARENTLY THE SOFTWARE WILL STILL CHARGE THE APP TO ONE'S REGISTERED VISA??? PLEASE GIVE DETAILED INSTRUCTIONS.
If I can, indeed, purchase something via PayPal, or ultimately, indeed with a VISA payment, without a glitch [I'll keep trying] I'll report it here. Meanwhile all the apps I've downloaded from BlackBerry World have been free ones, except for the one that mistakenly got sold to me via Bell billing me for it [which they won't] a few days ago [either Bell or BB got stuck with the $1.99 or something for that!]. The free ones I've downloaded have been excellent, including this Top 500 Ringtones, just the kind I was looking for, lots of real telephone and cell phone ring sounds for a purist like me...
But I hope BlackBerry can fix up the glitch in BlackBerry World soon, it shouldn't be there at all... my husband has the theory the facility is staffed by too small a core of software people to keep up with the problems and wasn't properly tested, or else it was subcontracted out and they are stuck with it until they get a new one -- come on, BlackBerry, get a new BlackBerry World payment procedure that works smoothly, us BlackBerry fans are anxious about you!!!

Just to say there ARE lots of Apps on BlackBerry World, so potential BB purchasers should not let that stop them, and some very good free ones, excellent -- BlackBerry Travel is really good, and OsmAnd maps are fabulous, big to download, but when you get it you'll be amazed. Just download a provincial or smaller map to start, because they are huge files and very detailed, but lots of trails and paths are on them... good for park trails and such.

Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

Hi Gurus,
We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
1)
G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
Posting:
Service A/C.....100 USD (Rs. 4900)
     To SR/IR Clearing A/C...100 USD (Rs. 4900)
2)
MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
Posting:
SR/IR Clearing A/C......100 USD (Rs. 4900)
     To Vendor A/C...........90 USD (Rs. 4320)
     To TDS A/C..............10 USD (Rs. 480)
     To Exch. Difference A/C. 0 USD (Rs. 100)
This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
3)
Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
Vendor A/C......90 USD (Rs. 4320)
TDS A/C.........10 USD (Rs. 480)
     To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
4)
Now when we try to post MIRO again, it is posting the following entry:
SR/IR Clearing A/C......97.96 USD (Rs. 4800)
Exch. Difference A/C.....2.04 USD (Rs.    0)
     To Vendor A/C........... 85 USD (Rs. 4080)
     To TDS1 A/C............. 10 USD (Rs. 480)
     To TDS2 A/C............. 5 USD (Rs. 240)
This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e. 4800 / 49).
Please help.
Thanks!
Regards,
Angad Nagpal

Solved.
The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
Thanks!
Regards,
Angad Nagpal

Problem with depreciation posting for an asset with a '0' net book value.

Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
Karol

Hi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol

Problem in seeing posts

Hi team,
I have seen some of the posts yesterday and day before in SDN but I am not able to locate them. It is happening like this for two days. Please let me know if you are having any suggestions.
Thanks,
Raj.

Hi Raj,
Above <i>Your Control Panel</i> -link you should see your own name as a link. Click the link and you should be able to see you previous posts.
Also if you click your name on the left (above your total posts count) you'll see the same result.
Regards,
Ville
Message was edited by: Ville Leivo

I can't send texts to some contacts in my iphone 4s. This is a recent problem, as previously all texts would send. The red exclamation mark appears and 'not 'delivered' shows on screen.

First time I've used this discussion forum, so may be posting problem twice! I can't send texts to some contacts in my iphone 4s. This is a recent problem, as previously I could send texts whenever I wanted. The exclamation mark and "not delivered' shows on screen when I ry and text certain people. I know for a fact that my number is not blocked by the receipients?

I've just realised, further to my earlier question - that the people I am trying to text do not have Iphones? Could this make a difference? (Although I have text them in the past)

How do I delete a previous post?

I'd like to delete a previous post of mine, but it's been up for long enough that I can no longer edit it myself. Do I have to contact a moderator? If so, how do I do that?
Thanks...

Unless there's something that for a privacy reason you want the information removed, just ignore it. Once people stop responding, the thread will eventually archive off the form. If you included contact information in the post or there's some other important reason you need it removed, you can post here:
http://discussions.apple.com/forum.jspa?forumID=1076
and ask a Discussions Host to remove the problem post.
Regards.

Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thanks

whats the problem?
Aquaphire
---USING LABVIEW 6.1---

TS2755 After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

Topic : Alesis Master Control Problem (to previous post unanswered fixed)

Similar Messages

Maybe you are looking for