TOPICS CAN'T BE ACCESSED

I just tried to open an old project... it's been about a year
since I worked on it...
When i try to open the .hpj file, i get some weird window
called Workshop.. it tells me that the file doesn't exist.. yet i
see it there...
so... then I went to RH Classic (v. 9)... opened it, then
tried to open the hpj file from there... that was ok, except that
it only opens the left pane... and says that I need a newer version
of MS Word - so i can't open any of the topics...
I'm not sure what happened... I don't believe that my main
office apps have been updated in that time...
Is it really that i need to get an upgrade? if so... what
version do i need to get.. do i need 5.X? i know this is a stupid
question.. but will 5x use/create "classic" files?
the engineers must have the .hlp and .cnt files for use in
the app.
Sorry if these are all stupid questions.. but i'm a bit in
shock that this has come up.

The first problem is probably because your hpj file has
become associate with Workshop rather than RoboHelp. You can change
the file association in File Mangler.
It is more usual for RoboHelp to complain your version of
Word is later than expected. What version do you have?

Similar Messages

I have forgotten my answers to my security questions and i can no longer access my email the reset link goes too what can i do please help

I can no longer access the email account because the server it was with shut down their email service

Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

Can a JApplet access a file to be read?

I think I recall reading or hearing somewhere that a JApplet cannot, for "security reasons", access any files on the computer it is running on unless it is the 'original' or the one where the code is stored. What I would like to do is have a file that will be only read (not written to) by a JApplet and use the information for the applet. If I always run the JApplet with a browser on the computer where I have the code stored, will it allow me to access this file or will it still prevent me? Or can I just have the file stored in the same folder as the applet in my webpage directory so that it will be able to access it there and display it for all others on different computers?
Thanks in advance for any insights!

Hello forum,
Lot of confusion's on this topic.
Here is my understanding.The question is "Can a JApplet access a file to be read?". Answer is "No". But workaround is there.Then where the confusion is.
I have seen kartik181 mentioned about using digital signature from verisign/similar to grant access to your local file system!
The question asked by aachi is " ........Is it so? What is the purpose of digital signatures then?"
Also aachi mentioned about policy file. That means to get an access to local file is something you have to do with policy file.
bharthy explained the same in detail with some example.
Now look at the original question posted by the author littleB.
The answer I got from jdk 1.2 sand box model..
"There is no longer a built-in concept that all local code is trusted. Instead, local code (e.g., non-system code, application packages installed on the local file system) is subjected to the same security control as applets, although it is possible, if desired, to declare that the policy on local code (or remote code) be the most liberal, thus enabling such code to effectively run as totally trusted. The same principle applies to signed applets and any Java application."
So if you want to do your applet (whether you store locally or remotely in the path of webserver) you would end up an easy way of changing policy file by allowing more easily to do the specific job.
Hope it gives a bit clear picture of it.

Time Capsule - can no longer access on MBP Leopard

For the past 6 or 7 weeks I can no longer access my Time Capsule from my MBP Leopard. However, I do not beleive this is a Time Capsule issue as I am still accessing (and backing up) successfully from a MBP running Snow Leopard. Note, the access and backup were running fine for over a year and suddenly just stopped working. I've done the basics like repair permissions, software update, checked everything. For soem reason, when I try to access, I can see the Time Capsule, I can connect until I get to Data then "mylaptop Sparse Bundle". When I choose that disk image backup - just continues for ever and ever with a dialog box that says "trying to connect" or something like that.
Any ideas appreciated ...
thanks

lumiere wrote:
"the current volume could not be mounted". Also "The Current Time Machine backup disk can;t be found".
Has this Mac had any problems since the last successful backup? Such as hardware repairs, especially a new logic board? A full restore?
Is the +sparse bundle+ currently mounted? If so, eject it and try again.
If not, or if that doesn't help, try a "full reset" of Time Machine, per #A4 of Troubleshooting.
Interesting to note that the final backup (7 weeks ago) failed - it looked like hourly backups worked and the final one failed ("says in progress" ?)
Yes, that's the partial, failed backup. Since it's incomplete, it won't appear in the "Star Wars" display, etc. Once Time Machine gets started, it will "recover" it, and convert it into a normal backup, with a new date & Time.
After that long without a backup, Time Machine will have a lot of work to do (including recovering the partial backup), so connect via Ethernet if at all possible. It will still take a while, but be 2-3 times faster than WIFI.

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

How to set up my elderly parent with Mac so that I can use remote access to help her?

I want to set my elderly mother up with a new Mac mini so that I can use remote access to show her how use email, browse the internet, share photos. (She lives in KY, I live in OR)
She has had an iPhone and an iPad for about 6 months and she can barely use them without becoming frustrated.   I want to be able to see her screen with her and show her how to do things.
My plan is to set her up with a Mac mini and I'll use my MacBookAir to remote into her system. I'm buying the mini to configure and then I'll mail it to her.
My question is whether to try to use Back to My Mac or Teamviewer for remote access
I have broadband with comcast and she has broadband with Access Cable. Each have their company modem/routers--neither of us have Airport Express.
I have my own iCloud account and she has her own.   If I use Back to My Mac, it seems that I would need to set up a separate account on my Mac that would sync to her iCloud account.
Teamviewer seems easier because I don't have to use a separate account.   Any advice?   Anything that I'm not thinking about?

As Linc says, you can establish a Screen Sharing session via iMessage and Facetime. The advantage of these 2 approaches is that once your Mom gets used to using them, she will be more comfortable using them to communicate with you. I've talked to my Mom via iChat (aka iMessage) more since she learned to use them, then in all the years before that (including when I was a child ). And just being able to see your Mom via Facetime can be useful when you want to gage how she is doing.
However, if you are any distance from your Mom, they you want backup methods incase something goes wrong.
So beside iMessage/Facetime, the next best would be Back-to-My-Mac via iCloud, however, you will want to establish her Mac as using your account so that you have the right to take control remotely.
An alternative that does not mix up your iCloud acounts would be to use TeamViewer.com (which has an unattended mode so you can do off-hour maintenance when your Mom is not around; or check up on her to find out if she is dating - Turns out if I had been paying attention, I would not have been blind-sided by my Mom getting Married again last Summer - she is in her 80's! ).
LogMeIn.com, as dwb says, can be used the same was as TeamViewer.com
Both LogMeIn.com and TeamViewer.com are very good at making it easy to get through the home router and if you are having any problems connecting using other Methods, TeamViewer.com or LogMeIn.com will most likely not have any issues.
Back-to-My-Mac allows screen sharing and file sharing so you can transfer files as well as control the screen.
Screen Sharing via Messages allows cooperative file transfer. That is to say, you can try pushing a file to your Mom, but she has to accept each transfer.
TeamViewer.com has an unattended file transfer mode.
LogMeIn.com requires the paid version to transfer files. However, there are other ways to transfer files, such as downloading them from the original source on your Mom's system while using screen sharing, using Dropbox (or similar), emailing them, etc...
Of course if you are really network savvy, you can roll your own via ssh tunnels, port forwarding routers, getting dynamic DNS names, transferring files via scp, or tunneling AFP file sharing, tunneling your screen sharing sessions. Lots of fun and excitement playing with terminal commands

Color Nook can no longer access library . . How can I resolve this problem?

I have a Color Nook. Recently it was updated automatically. Since the update I can no longer enjoy reading the library books I once could. I used Overdrive and Adobe Digital Editions to access my county library in the past but can no longer access it.. I get an error message of E_AUTH_BAD_DEVICE_KEY. Apparently I have lost authorization to the AdobeID server.
How do I resolve this problem?

Well, you could start by asking in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions
This is the Reader one.

Can I obtain access token from ADFS 3.0 based on OAuth ACS-token that I already have?

Hello!
I have the following setup: iOS device, ACS/WAAD is IDP and ADFS 3.0 as RP, securing access to WIF web service.
I want iOS application users to be able to access ADFS-protected web-service.
I have created some users in WAAD, configured trust between ACS IDP and ADFS RP.
ADFS is registered in WAAD with AppID = ADFSAppID
I am doing the following request in order to obtain authorization token for iOS app user from ACS:
const string issuerName = "[email protected]";
const string issuerPassword = "Password!23";
var authContext = new AuthenticationContext("https://login.windows.net/ADFSAppID");
var uc = new UserCredential(issuerName, issuerPassword);
var result = authContext.AcquireToken("http://adfs.appdomain.com/adfs/services/trust",
"ADFSAppID",
uc);
_authHeader = result.CreateAuthorizationHeader();
So, I have a token from ACS in JWT format.
Now I need to present this token to ADFS in order to obtain a new token that I can use to access the web-service. I am trying the following POST-query:
https://adfs.appdomain.com/adfs/oauth2/token?grant_type=authorization_code&code={0}&client_id=ADFSAppID&redirect_uri=http://web_service_url
However, when I try accessing web service with that token, I am getting 403:unauthorized and redirected back to ADFS.
I have already tries lots of code solutions, such as
http://leastprivilege.com/2010/10/28/wif-adfs-2-and-wcfpart-6-chaining-multiple-token-services/
http://www.cloudidentity.com/blog/2013/07/30/securing-a-web-api-with-windows-server-2012-r2-adfs-and-katana/
http://blog.scottlogic.com/2015/03/09/OAUTH2-Authentication-with-ADFS-3.0.html
But somehow the problem remains: I cannot get such authentication token from ADFS that it is accepted by my webservice as a valid token.
Can anybody provide any links or code samples of token exchange between ACS and ADFS?

Yes, it is. I was able to authenticate normally, if I am using ADFS as IdP for WIF RP.
But when Azure is IdP for ADFS-protected WIF WS, I am unable to get tokens that would be accepted by WIF WS

My iPhone 5 wont allow me to slide across so i can't gain access

my iPhone 5 wont slide across so i can't gain access. can you help?

Hold down the home and power button at the same time until you see the Apple Logo.

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

Hey GingCarv,
Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Note: At this time, movies are not available for automatic downloads.
Thanks,
Matt M.

Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app. I just get a blank white screen. Is there a fix for this yet?

Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app. I there a fix for this yet?

Scalesy05 wrote:
I there a fix for this yet?
Why would there be a fix? YOU are having the problem. I'm not, no one I know is having the problem. No fix is needed.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new. Have you been through any, if not all of these troubleshooting steps yet?

HT1918 How can I change my rescue email. I am trying to change my email for my Apple account because I can no longer access the email on the account. My only email I use is my rescue email and it will not allow me to change my Apple ID email to my rescue

How can I change my rescue email or get rid of it? I need to change my email under my apple ID to the email that is my rescue email. It won't allow me to have the same email. I only have one email address and can no longer access the email address under my apple ID

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

ERROR: file can not be accessed or does not exist

I have a client online at this very moment that just went on and did all their page edits... about 2 hours of work for him.
He went to save the file & received the error "...file can not be accessed or does not exist, Error" (no error number or anything. Here are the steps he took:
Edit page
Save ... received error
Done... received same error
Call me in panic
Anyone???

Hello Tommy,
The editing session should not time out for 24 hours for a normal login. The period is even longer if “remember me” was checked at login... And if the session timed out, you should have been prompted with the login dialog, not thrown an error.
I've sent you a private message regarding further troubleshooting.
Best regards,
Corey

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Why can't I access my Gmail account after upgrading to YOSEMITE

Why can't I access my Gmail account after upgrading to Yosemite

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

TOPICS CAN'T BE ACCESSED

Similar Messages

Maybe you are looking for