TopLink 10.1.3.0 and SQL Server 2008 XML datatype
We use TopLink 10.1.3.0 and SQL Server 2008 database. We are trying to map a table with a column of XML datatype, but the 'Direct to XMLType' Mapping is disabled in the Workbench.
Is it possible to map an XML datatype? If so, can you please some guidance on how it can be achieved.
Thanks for the help.
Edited by: amehta5 on Nov 4, 2010 4:09 PM
The Direct to XMLType was desired for the Oracle XMLType. TopLink does not currently support it for SQL Server. You could extend the SQLServerPlatform to add you own support. You must also be able to just map it to a String using a DirectToFieldMapping. If the MW does not let you use the mapping, you can add it in a customizer/amendment method.
FYI: If you are using TopLink 11, you should be using the eclipselink.jar and ideally using JPA, and not using the Mapping Workbench.
James : http://www.eclipselink.org
Similar Messages
-
SQL Server 2008 XML Datatype variable size limit
Can you please let me know the size limit for XML Data type variable in SQL Server 2008?
I have read some where that the XML data type holds up to 2GB size. But, its not the case.
We have defined a variable with XML data type and assigning the value by using SELECT statement FOR XML AUTO with in CTE and assigning the outout of CTE to this XML type variable.
When we limit the rows to 64 which has a length of 43370(used cast(@XMLvariable AS varchar(max)), the variable returns the XML. However, if i increase the rows from 64 to 65 which is length of 44048, then the variable returns with Blank value.
Is there any LENGTH limit of the XML data type?
Thanks in advance!!Hello,
See MSDN xml (Transact-SQL), the size limit is 2 GB and it is working. If your XML data will be truncated, then because you are doing something wrong; but without knowing table design
(DDL) and your query it's difficult to give you further assistance; so please provide more details.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Compatability: CR 2008, VS 2005 and SQL Server 2008 on WINDOWS 7
Crystal Reports 2008, Visual Studio 2005 and SQL Server 2008 all play nice together on a VISTA or XP box. But we cannot get a connection when we switch the OS to WIN 7. I tried to get a connection via the report designer. Is this combination of technologies currently supported?
Thanks.Hi, Jeff;
See the [Platforms|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/00225757-ab5c-2c10-c1a8-fb9f9f0f4ac2] document for CR 2008. You need Service Pack 2 to run on Windows 7.
If you already have SP 2, then what happens when you try to make a connection?
Regards,
Jonathan
Follow us on Twitter u2013 http://twitter.com/SAPCRNetSup -
Java for PI 7.1 EHP1 in Windows and SQL Server 2008
Hi Gurus
I try to install PI 7.1 EHP1 in Windows and SQL Server 2008. The questions is :
What version of java is the correct for this installation???
And where i can download it??
Thanks and advance!!!Hi Aaron,
The version for PI 7.1 is 1.5, instead of the 1.4.2 of 7.0/3.0.
Anyway, for VM settings, you should refer to SAP JVM, which
is used for the PI 7.11.
Hope it helps!
Regards,
Caio Cagnani -
HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2
Hi,
I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from SCOPEX.WORLD
My Config files:
On Sun Sparc 5.9 where Oracle server is running.
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
Listener.ora file on Windows machine:
TelemetryDB1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_TelemetryDB1 =
(SID_LIST=
(SID_DESC=
(SID_NAME=TelemetryDB1)
(ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
(PROGRAM=hsodbc)
Tnsnames.ora file:
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
HS_FDS_CONNECT_INFO = TelemetryDB1
HS_FDS_TRACE_LEVEL = OFF
We have created DNS with TelemetryDB1.
I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
Please advise me to rectify the error. We've been working for the last couple of weeks.
Regards,
SunilSunil,
You don't need an Oracle ODBC driver.
The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
However, there are a couple of problems with your actual setup -
- the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
- 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
There is more information in the following note available on My Oracle Support (MOS) -
Note.1083703.1 Master Note for Oracle Gateway Products
The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
p10098816_112020_platform_4of6.zip
However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
Have a look at -
Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
But remember this is not a supported version or configuration and you should be using Dg4ODBC.
Regards,
Mike -
Which version of crystal reports can link to Windev 14 and SQL server 2008 applications
I am developing an application with windev 14 and sql server 2008, i would like to know which version of crystal report can i use?
Hi GS,
Move to .NET SDK forum.
I don't know how CR for Visual Studio will integrate into WinDev but to get the installer for VS 2010/2012/2013 go to this page:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
It's the runtime for CR 2011 or 2013 now.
As for SQL 2008 you need to install the Client tools and when creating reports use the SQLNCLI10.dll as the client DB driver for ODBC or OLE DB.
Don -
Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle
Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
ThanksHi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team -
LC 8.2.1.3/JBoss and SQL Server 2008 R2
Does anyone know if there are any issues with JBoss and SQL Server 2008 r2? I tested connecting to a 2008 sql server in the adobe-ds.xml file and was getting errors in my server log.
The version of JBoss was what came with 8.0. Would I need to update JBoss prior to being able to connect to a 2008 sql server?
Thanks,
JohnYou are correct. You cannot use 8.2 with 2008 SQL server. You have to upgrade to version 9.
Thank you,
John Daily
Sent via Blackberry
John Daily
Application Systems Analyst III
King Pharmaceuticals, Inc.
Office: 423-989-7165
Cell: 423-956-3911
This E-Mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. This communication may contain material protected by the attorney-client privilege. If you are not the intended recipient or the person responsible for delivering the E-mail to the intended recipient, be advised that you have received this communication in error and that any use, dissemination, forwarding, printing, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately. -
Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aaI think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Reporting with Report Builder 3.0 and SQL Server 2008 R2
Hi everyone
I'm trying really hard to find books about Report Builder 3.0 or SQL Server 2008 R2
I found the following books on the "learn" site, sadly they do not cover Report Builder 3.0 or SQL Server 2008 R2 since there all too old.
Microsoft® SQL Server® 2008 Analysis Services Step by Step
Microsoft® SQL Server® 2008 MDX Step by Step
Microsoft® SQL Server® 2008 Reporting Services Step by Step
What are good books (like the ones above) for the newest system?Hello wishmasterIN,
Thank you to post your question on TechNet forum.
Based on my experience, the books are always delayed to the new technology, since the author need time to summarize and analyze the new features in the new product or technology, write it down and publish it. If you want to have a quick learning about the
new technology, MSDN library is a good place. It can be a cookbook for you. It contains some detail steps for tools, such as Report Builder or BIDS. It also contains many new features introduction. It is always very useful for you to understand the new features.
In addition, it is based on web and many links make you can jump to the other technical point freely. The most important is all of these is free and all the information will be updated if the new feature is released.
In short, if you want to learn the latest technology about Microsoft product, MSDN is a good choice. I hope my introduction is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support -
Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)]. SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM 4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)]. SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM 4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name. I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark -
Hi!
The setup process fails with this error:
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
I have found some hints by google, but nothing really helpfull.
Has anyone had a simular problem when installing SQL server 2008 R2?
All posts I found are about sql server 2008 (no R2!).
The cluster itself is working (storage, network, msdtc, quorum...).
Any hints?
Andreas
Here is the complete log:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2067791871
Exit facility code: 1216
Exit error code: 1
Exit message: Failed: see details below
Start time: 2012-04-06 11:23:57
End time: 2012-04-06 12:01:21
Requested action: InstallFailoverCluster
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x625969A3%400x294A9FD9
Cluster properties:
Machine name: OC-SQLCL02ND01
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine name: OC-SQLCL02ND02
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine Properties:
Machine name: OC-SQLCL02ND01
Machine processor count: 32
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: G:\x64\setup\
Installation edition: STANDARD
Slipstream: True
SP Level 1
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: MANAGEMENT\sqladmin
AGTSVCPASSWORD: *****
ASBACKUPDIR: S:\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: S:\OLAP\Config
ASDATADIR: S:\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: S:\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: MANAGEMENT\sqladmin
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: MANAGEMENT\administrator
ASTEMPDIR: S:\OLAP\Temp
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
CUSOURCE:
ENU: True
ERRORREPORTING: False
FAILOVERCLUSTERDISKS: Cluster Disk 3,Cluster Disk 4,Cluster Disk 5
FAILOVERCLUSTERGROUP: SQL Server (MSSQLSERVER)
FAILOVERCLUSTERIPADDRESSES: IPv4;172.29.2.122;Cluster Network 2;255.255.255.0,IPv4;172.29.3.122;Cluster Network 3;255.255.255.0
FAILOVERCLUSTERNETWORKNAME: CLUSTER02
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: S:\
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
PASSPHRASE: *****
PCUSOURCE: d:\install\mssql\sp1
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: MANAGEMENT\sqladmin
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLDOMAINGROUP: <empty>
SQLSVCACCOUNT: MANAGEMENT\sqladmin
SQLSVCPASSWORD: *****
SQLSYSADMINACCOUNTS: MANAGEMENT\administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBDIR: T:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQMREPORTING: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\SystemConfigurationCheck_Report.htmHi Andreas Plachy,
Please make sure that the Virtual Server Name ‘CLUSTER02’ is unique on the network. In addition, are there any resources named ‘SQL Server’ on the Windows cluster? If that is the case, you may need to rename the related resources to avoid conflicting with
SQL Server, and try again.
Stephanie Lv
TechNet Community Support -
I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks. -
Side By Side Configuration Error Windows 7 64 bit and SQL SERVER 2008 R2
Hi,
I keep getting the side by side error... I tried installing the patches, and service packs i reinstalled sql server 2008 r2 like 10 times. It won't go away. I tried the registry edit a few people say works. This has been killing me for a week now,
I cannot run my sql server on my machine its crazy..???
Please help
thanks, NIck
Activation context generation failed for "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe". Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"
could not be found. Please use sxstrace.exe for detailed diagnosis.
Log Name: Application
Source: SideBySide
Date: 2/16/2014 10:36:55 PM
Event ID: 33
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Nick-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe". Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"
could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">33</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-17T03:36:55.000000000Z" />
<EventRecordID>505191</EventRecordID>
<Channel>Application</Channel>
<Computer>Nick-PC</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>Hi NickDeNora,
According to your description, we need to verify if you install
Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) and
correct the manifest file. The manifest file is readable (although empty), but we cannot edit it (even if you are an administrator). Only SYSTEM has access to the file. So to be able to edit it, you must first take ownership of
it and grant ACLs. After saving the file, then run the setup again.
For more information , see:
http://blogical.se/blogs/johan/archive/2012/06/23/sql-server-vc-installation-voes.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
ORA-28545 Between ORACLE 10G and SQL SERVER 2008
Hi All,
i'am doing heterogeneous connectivity as oracle 10G (Unbreakable linux4) to sql server (SQL SERVER 2008)
The DSN and the connections works ok (FreeTDS and UniXODBC).
I create the dblink
create database link inforpyme connect to "sa" identified by " " using 'INFORPYME';
and when I do select * from "sysobjects"@inforpyme I get the next error:
ORA-28545: error diagnosticado por Net8 al conectar a un agente
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a INFORPYME
This is my listener:
IBK =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY=PNPKEY))
SID_LIST_IBK =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ibk)
(ORACLE_HOME = /App/oracle/ora10g2)
(SID_NAME = ibk)
(SID_DESC=
(SID_NAME=inforpyme)
(ORACLE_HOME=/App/oracle/ora10g2)
(PROGRAM=hsodbc)
My tnsnames:
INFORPYME =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME=inforpyme))(HS=OK)
The TNSping gets
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME=inforpyme))(HS=OK))
OK (0 msec)
and the initINFORPYME.ora:
HS_FDS_CONNECT_INFO = inforpyme
HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_FILE_NAME = /tmp/freetds.trc
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
# ODBC specific environment variables
set ODBCINI=/usr/local/etc/odbc.ini
Anybody may help me? ThanksSorry i think has been a misunderstanding
this is my /App/oracle/ora10g2/network/admin/listener.ora
IBK =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY=PNPKEY))
SID_LIST_IBK =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ibk)
(ORACLE_HOME = /App/oracle/ora10g2)
(SID_NAME = ibk)
(SID_DESC=
(SID_NAME=inforpyme)
(ORACLE_HOME=/App/oracle/ora10g2)
(PROGRAM=hsodbc)
I stop a start and this is the status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-SEP-2012 13:18:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-SEP-2012 13:16:40
Uptime 0 days 0 hr. 1 min. 49 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /App/oracle/ora10g2/network/admin/listener.ora
Listener Log File /App/oracle/ora10g2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ovm1ora.drvsa.com)(PORT=1521)))
Services Summary...
Service "ibk" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
Service "ibkXDB" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
Service "ibk_XPT" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
The command completed successfully
i don'nt know why doesn't appears the service inforpyme, this it normal?
Maybe you are looking for
-
[SOLVED] Kernel panic at boot due to root FS not found
When I try to boot using a new kernel version (eg. 3.0.1 or 2.6.39), I get a kernel panic with an "init not found" error message. I haven't been able to get any more detailed error messages, but I assume that there's a problem with finding or mountin
-
We are using Outlook 2010 and Outlook 2013 in our Exchange 2013 SP1 environment. I noticed the following behavior when recovering deleted items: From Outlook, I select my mailbox name and choose Folder-Recover Deleted Items. Then, I select some item
-
Extract the message from correlation id what is this problem
Message Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=7.8... Leaving Monitored Scope (EnsureListItemsData). Execution Time=9.6533039437744 Leaving Moni
-
Can you lower FaceTime volume while watching other videos in Safari/ listening to music in iTunes? Many times when I am FaceTiming I also watch videos in Safari and listen to music in iTunes. Can the volume be adjusted for FaceTime in Mavericks becau
-
Arris NVG589 - No connections are available, windows 8.1
was there a recent update to the ARRIS NVG589's software? I ask this because all of a sudden my mothers computer cannot connect to the wifi. I looked at the device manager and it stated that the drivers were bad. So that means they were no longer com