TopLink vers. 9.0.3.5 needed

Can anyone help me find this version? The new version generates different files and I don't want to have to change everything... I am looking for where I can download vers. 9.0.3.5. Thx.

9.0.3.X has been de-supported as of July 2005. Extended support is available until July 2008. The complete details are available in Metalink note 273213.1.
Doug

Similar Messages

  • The disk drive door is open.... vers. 2.3 ipod need help (con'tud)

    almost everytime i try and load music onto my vers. 2.3 ipod it says "the disk drive is not ready for use; the door maybe open. Please check disk drive F: and make sure that a disk is inserted and that the drive door is closed" but i dont understand, and its making me angry cuz i have some music on my ipod, but most of the songs wont load onto it, please hlelp
    no idea   Windows XP   its almost full with memory

    becuase i didnt buy the ipod new, so it didnt come with a box or any other thing except for the wall charger and i cant find the download for the 2.3 ipod updater

  • The disk drive door is open....blah blah blah vers. 2.3 ipod need help

    almost everytime i try and load music onto my vers. 2.3 ipod it says "the disk drive is not ready for use; the door maybe open. Please check disk drive F: and make sure that a disk is inserted and that the drive door is closed" but i dont understand
    no idea   Windows XP   its almost full with memory

    becuase i didnt buy the ipod new, so it didnt come with a box or any other thing except for the wall charger and i cant find the download for the 2.3 ipod updater

  • Have registered ver elements 7 on win7, need to reinstall and get "invalid serial number"

    Have registered version of elements 7 on win 7
    had to reinstall win7 and now install disk says I have "invalid serial number" but it';s the same serial number I registered??

    See the following:
    My serial number doesn't work :
    http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html
    If that doesn't help, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • I cannot watch Directtv on my computer. I run XP and have mozilla ver 32. Says i need to install flash which I download and open then nothing happens...blank b

    When attempting to watch Direct tv on my computer (runs XP) i needed to9 download a program from Direct TV which then tells me that I need to install Adobe Flash and provides a link. I get a message stating that I cannot install and refers to Internet Explorer. I then went to the Adobe website and proceeded to download flash which I did. When I clicked on the file a box came up which states install Flash but the box is empty and nothing happens. Pls help

    Hello,
    I notice in your system details that you have an outdated version of the Flash plugin for Firefox. In Firefox, can you try going to the following link and updating as appropriate:
    * https://www.mozilla.org/en-US/plugincheck/
    Alternatively you can go here and select Windows 7/Vista/XP/2008/2003 and Flash for Other Browsers (and deselect McAfee if you do not want that bundled in your Flash):
    * https://get.adobe.com/flashplayer/otherversions/
    If you download Flash in Internet Explorer and not select the correct options, it might download the installer for Internet Explorer as opposed to for Firefox.

  • Every table need primary key in toplink mapping to fetch the data

    Hi everyone,
    we are working on toplink mapping , it neccessary every table needs primary key. if yes, gave me example.

    Hi everyone,
    Alterations in database will not be automatically reflected in toplink so, there is any alternative
    with regards
    abusufian

  • Need 110-240V Power Supply for WRT54G Ver 8.0 12V 0.5A DC

    Can anybody sell me a power supply for my WRT54G Ver 8 wireless router?
    Need 110-240VAC to 12V 0.5A DC
    If you cannot sell me this item, can you recommend an online vendor?
    Thanks a lot.

    I checked on the wireless routers adapter .. it shows ...
    Ac Input 5V 2A Jack Type :   BIG  BARREL AC Input  110~120V

  • Need suggestions for new router running mac with eyeconnect,and ps3

    We have the latest version of leopard on our 24" imac and we have eyeconnect ver. 1.6 we need to buy a new router and i want one that is very easy(like plug it in and walk away)to use. The main priority for this is not having problems streaming media to our ps3 via eyeconnect or medialink. Wireless or wired whatever would be the best i have never actually had an airport only linksys and have been unhappy with most of them any advice welcome about the router or getting eyeconnect to be recognized by the ps3 once its hooked up. Thank you

    What I have in my house is an Airport Extreme with it's two (n,b or g) wireless connections for older non-N wireless connections. I then got a D-Link DGS-2208 10/100/1000Mbps 8-Port Desktop Green Ethernet Switch 8 for fast subnet sharing in the house. This speed is important for HD video sharing for from the external I have connected to the USB2 port on My Extreme.
    Note: My Extreme is in "Bridged mode" because it sits behind a wired router that acts as the DHCP server.
    Getting a router with Gig Ports and and USB2 port for an external to store/share files (videos mainly) to all my networked devices. The USB2 port on the Extreme was the deciding factor for the extra cost and this handy port making any USB2 external into a networked drive. Plus my older iPhone 3GS only does G it was a no-brainier because of the dual wireless.
    The GIG switch is future proofing yourself for the years to come.
    Plus I called the extreme but it is a Time Capsule that is just and extreme with a built-in disk.
    One more thing: Use CAT6 cables in your network.
    Message was edited by: satcomer

  • TopLink essentials: extra where clause for one to many relationship?

    We have a lot of tables that contain "historic" records. Those are marked by a column "historic" holding a value "Y". Sometimes we are not interested in historic values. For example in the next case:
    @Entity
    @Table(name="ART")
    public class Article {
        @OneToMany(mappedBy="article", cascade=CascadeType.ALL, fetch=FetchType.LAZY)
        private Collection<ArticleStats> arcItems;
        public Collection<ArticleStats> getArticleStats() {
            return arcItems;
    }One article can have multiple "stats". We are in this case only interested in the "stats" of this article that are not historic. In SQL terms, I would like to add an extra where clause: "WHERE historic = 'N'".
    Of course inheritance (with discriminators) is an option, but I don't prefer that. We have a lot of relationships like this and using inheritance would mean we have to add a lot of extra classes. Is there a way to add an extra where clause to the query that is used to retrieve all the stats records related tot my Article?
    We use TopLink essentials with an IBM AS/400 database.

    The JPA Spec does not handle this case, but TopLink Essentials does. You will need to customize your TopLink descriptor using a DescriptorCustomizer. You can set your DescriptorCustomizer in your persistence.xml using the "toplink.descriptor.customizer.<entity-name>" property set to the class name "<package>.<class>" of your customizer class.
    The customizer would look something like:
    public class MyCustomizer implements DescriptorCustomizer {
    public void customize(ClassDescriptor descriptor) {
    OneToManyMapping mapping = (OneToManyMapping )descriptor.getMappingForAttributeName("arcItems");
    ExpressionBuilder builder = new ExpressionBuilder();
    mapping.setSelectionCriteria(builder.getField("STAT.ART_ID").equal(builder.getParameter("ART.ID").and(builder.getField("HISTORY").equal("N")));
    If you never wanted historical records you could also add this expression to your descriptor's additionalJoinExpression.
    James Sutherland

  • HELP - Hibernate vs Toplink!!!

    Hello Everybody,
    I have some questions related with Hibernate vs Toplink.
    1- To obtain that driver JDBC it gives back the amount of rows affected in each one of updates of a lot that is executed in batch. Hibernate to implement the optimistic lock, adds to each consultation a "WHERE >" where it compares the VERSION of the object in memory with the field VERSION of tuple corresponding in the DB. If it detected that rows were updated "0" it interprets that another user modified that object before and shoots an exception of Concurrence. When batch is used to execute a lot of consultations, driver gives back a vector like result. Each position of this vector this destining to indicate the amount of updates that they became in each consultation of the lot. The problem is that when using PreparedStatement (that is what Hibernate uses to execute the queries) the vector gives back to "-2" in all positions without concerning the real amount that were affected. The affected fact that driver it gives back to "-2" and not real amount
    it for a consultation causes that Hibernate cannot determine if were or not a concurrence problem. We cannot modify Hibernate so that it knows to interpret the "-2" given back by driver because it would not be sufficient to determine if the version were or not modified. The safe SOLUTION to this problem would be that driver it gives back to Hibernate the affected real amount to him in each one of the positions. This is what Hibernate hopes. We can see the execution batch that implements Hibernate in org.hibernate.jdbc.AbstractBatcher>>executeBatch of the
    distribution of Hibernate. Could be solve this problem with Toplink?
    2-Security by dominion. How we would take label security with Hibernate? I know it is possible much better with Toplink but what about Hibernate.
    3-Multiple mappings with Hibernate. Hibenate makes alternative mappings and for this reason it raises more of the necessary thing affecting the performance. Although with them we solved several problems of performance turn out uncomfortable to maintain to them. How we can improve it. Could be solve this problem with Toplink?
    Best Regards,
    Seba.

    1- This issue is down in the driver, and we have seen it before. We have worked with the driver team to come up with a solution in the 10.1.3.1 release. The client would use the Oracle9Platform and call this method session.getLogin().getPlatform().setUsesNativeBatchWriting(true); This will cause TopLink to call special API on the Oracle Drivers to do what is expected of locking and batching together.
    2- I assume that you are referring to OLS and VPD. TopLink supports this, but we will need more information to help you further.
    3- Not sure what you mean here... In TopLink you can map multiple mappings to the same entity. is that what you are referring to?

  • I want to upload my Jewelry photos and drop out their background to appear they are floating on a white background.  Can I do this in I web or I Photo to get that look on my Web Page?  Have 3.01 ver of I Web

    I want to upload my Jewelry photos and drop out their background to appear they are floating on a white background.  Can I do this in I web or I Photo to get that look on my Web Page?  Have 3.01 ver of I Web

    You will need a 3rd party image editor that can seletively remove the background and let you create a transparent background png file. Maybe with a drop shadow (or not) something like this:
    A photo of me during one of my therapy sessions.   If you have Pages (part of iWork) you can also make transparent background images with the Alpha tool..
    OT

  • Learning TopLink??? Where is the documentation???

    We just purchased TopLink. It came on one CD. I installed the entire CD to my workstation and went through all the HTML/PDF documentation and came away scratching my head regarding how to program using TopLink.
    The digital documentation was FAR too brief. It mentions a "QueryReport" and the "ExpressionBuilder" and showed examples of each, but I'm still not sure when you'd use one over the other. It simply doesn't say.
    There aren't any books covering TopLink in existence. Do we need to purchase the TopLink documentation (assuming there is such a thing)?
    How do you learn TopLink?
    HELP!

    Sam,
    There are some examples in <install_dir>\demos and <install_dir>\examples\core\examples. You might want to start with a simple table with about 3 columns and one class and slowly add on. The learning curve is little bit steep but not too bad. There are some things you will just learn by doing. The examples are not too detailed but the basics are covered. Once you launch toplink, there are two ways to access the docs, see help menu. But, many of the different ways are based on what you might want to get done and performance considerations.
    Vamshi

  • TopLink very slow (newbie)

    Hi,
    I have a simple query in TopLink, but it seems that time needed increases exponentially to the number of the resulted rows.
    At ~100 rows it needs a couple of milliseconds, but at ~10,000 it needs five minutes! The log is full with "Register the existing object", with the same object several times, and these rows are coming very slow. The SQL query is quick (60-150 ms). Is it something about the cache? Or else?
    (I've installed this one too but it didn't help: glassfish-persistence-installer-v2-b41.jar)
    Thx,
    MB

    Joining across a M:M with many rows can be expensive. How are you comparing the speed of the SQL execution? You need to make sure you are comparing identical SQL through the same JDBC driver and also ensuring that your JDBC test case loads in all of the resulting rows. If the difference in execution time of the TopLink query continues to be a problem I would recommend trying:
    1. Using EclipseLink 1.1.2 (www.eclipselink.org). This is our latest development effort and has many performance optimizations included.
    2. provide us more information on the dmain model, query executed, and resulting SQL statement(s)
    Doug

  • Need Tiger upgrade for FileMaker

    My server is a G4 1Ghz Power PC. It runs OS 10.3.9 and Apple Server 10.3. We need to upgrade to Tiger to update our FileMaker to ver. 9. I need to know if upgrading the OS to Tiger (10.4) will the server software (10.3) be compatible or will the server software also need to be upgraded.
    Thanks.
    Linda

    You can't upgrade to 10.4 and still have the server software be 10.3. You'll need to purchase a new copy of Mac OS X Server version 10.4.

  • MSI GTX 460 Hawk hangs, need help

    Hello!
    Need help with my MSI GTX 460 Hawk.
    Sometimes it hangs and I need to restart my computer and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
    Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
    The temperature is ok, maximum is 70 deg. in 3D game. I even tried to set videocard cooller to 100% and it didn't help.
    I did no overclocking or anything like this.
    I use the latest videodriver from nvidia's website and the latest directx.
    Windows 7 64bit.
    Can you help me to solve this problem?

    Quote from: flobelix on 25-August-13, 00:21:30
    Follow >>Posting Guide<<
    If you are really in lack of parameters:
    Board: Gigabyte GA-EP45T-UD3LR
    VGA:  MSI GeForce GTX 460 Twin Frozr II
    PSU: Raidmax 500W (22A on 12v rail)
    Intel Core 2 Duo 8500 3.16GHz LGA 775
    OS: Windows 7 64bit
    The problem: Videocard began to hang:
    Sometimes it hangs and I need to restart my computer, sometimes I get BSOD and sometimes screen goes black and then windows says that video driver wasn't responding and was recovered.
    Computer hangs more often in the 3D game, but in not 3D programms computer hangs too, but no so often.
    What I've allready tried:
    1. Installed latest drivers from nvidia.com and latest directx.
    2. Checked temperature: maximum is 70 deg. in 3D game at 100% load. I even tried to set videocard cooller allways to 100% and it didn't help.
    3. Installed MSI Kombustor to burnin test videocard, but I can't catch any hangups with it.
    4. Checked windows system log. The last warning after driver recovery message is:
    Video driver nvlddmkm wasn't responding and was recovered.
    5. Two latest BSODs were caused by dxgkrnl.sys and nvlddmkm.sys drivers.
    6. Finally installed MSI LiveUpdate, it shows that no videodriver is installed and wants to download an old videodriver ver.  258.96.
    Need help to solve this problem.

Maybe you are looking for