Topology Services not running

Hi,
I have another problem for CM Topology Services. Even though with specified version of java plug in on the server, Topo Services is not able to run. Java logo is also not loading. Please advise. Thanks!!!
Regards
Yi Shyuan

Hi, jeeyishyuan.
If you want to avoid saving the .jnlp file, try to go to Tools > Internet Options > Advanced > Security tab and confirm that the option "Do not save encrypted pages to disk" is disabled. If it is not, disable it and your problem should be solved. Anyway, you can always double-click the Topolopgy_Services.jnlp file as Joseph Clarke suggested.

Similar Messages

  • Auto-start services not running :Shell Hardware Detection in my Health Reports

    Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
     Auto-start Services Not Running Shell
    Hardware Detection.
     I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
    Any Advice what might be the problem? 
     

    Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
    From http://technet.microsoft.com/en-us/library/hh831394.aspx:
    "After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
    only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
    Services in the thumbnails for server groups, including the
    All Servers group. In the Services Detail View dialog box, on the
    Services drop-down list, clear the check box for Shell Hardware Detection, and then click
    OK."
    That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
    Mark Berry
    MCB Systems

  • Diagnostics policy service not running on Windows 7 home premium

    I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
    service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
    Error code is 5: access denied

    Hi,
    Thanks for the post!
    Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
    After that, check if you can connect to the internet.
    For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
    Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
    Restart the computer to check if this service is working now.
    Regards,
    Miya  
    This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • The Data access service not running or not yet initialized.

    Hello guys , 
    i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error 
    OS : Windows 2012r2 patched and scom 2012 r2
    sql : 2012 r2 enuff database size  
    tried few things as :
    1. change the account to domain admin for system center data acess service  still no luck
    2. created registry keys for servicepipetimeout to 6000 bt still nit working
    3.  Refresh sql account used for sccom data aceess service  still no luck 
    4. the service disappears as running after 30 seconds and the console is unable to open 
    kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
    thanks guys in advance
    Basit Siddiqui
    AIG

    Check that following:
    Verify permission of SCOM Account on sysadmin and OM DB.
    Check firewall that is disable
    Check antivirus that didn't block scom folders or services.
    Check SQL services is running
    Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
    Also you can check below link
    http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
    Technical | Twitter:
    Mai Ali

  • Window search service not running

    window search service not running how i can fix it?
    This question was solved.
    View Solution.

    Hi,
    From the Desktop, hold down the Windows key and press

  • [mostly solved] Strigi service not running

    Hello,
    Since I am constantly fluctuating between a rich and a minimalistic desktop environment, I'm trying out KDE once again. The Soprano/Nepomuk/Strigi stuff seems really interesting but I fail at using it.
    When I go to System Settings -> Advanced -> Desktop Search it says "Strigi service not running". While Nepomuk is activated, I can't activate Strigi. When I set the checkbox for Strigi and apply, the message is still there. When I close the widow and go back again, the checkbox is deactivated again.
    The searchbar in dolphin never finds anything and there is no interface for tagging or commenting files.
    However, I can index files and find stuff when I run strigiclient.
    What may the problem be?
    Thanks,
    Viv
    Last edited by V for Vivian (2010-06-30 07:48:54)

    Steigi seems to be installed.
    viv ~ $ pacman -Q strigi
    strigi 0.7.2-2
    I'm considering a clean Chakra installation but this seems kind of unaesthetic and stupid.
    edit01: I've just renamed my .kde4 folder and restarted KDE. Now Strigi is indexing and I can tag files, everything works. Some kind of configuration seems to have been wrong. I think I can figure this out.
    edit02: I had to replace the .kde4/share/apps/nepomuk folder with a clean one, maybe something with the database or how it is accessed. Don't have time to go into this right now, I'm just happy it works now.
    Last edited by V for Vivian (2010-06-30 08:16:11)

  • Windows Modules Installer - Autostart Service Not Running

    I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error.  I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service.  However,
    from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan. 
    Just curious if anyone else is getting this.
    Autostart Services Not Running:
    Windows Modules Installer

    Hi MattSla,
    On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
    Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
    I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
    It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
    If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
    us to go further analyze.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Nexus 1010 VSM does not see VEM (DPA service not running....)

    Hi all,
    I have the attached topology. All the conf outputs and device details are attached.  The problem is "vemcmd show card info" output shows that VEM correctly receives the control, packet VLAN information from the VSM. However I couldnt make vempda service to run. I got the same output all the sayins that : "VEM Agent (vemdpa) is not running".  I checked the control and packet vlan end to end connectivity by creating VMs and etc. there werent any problems....One thing is that, VEM AIPC MAC never showed up in the upstream switch which is connected to ESX host.
    I would be glad if someone can help me out with any configuration errors or anything like that...
    [root@sahaesx1 ~]# vem status -v
    Package vssnet-esx5.5.0-00000-release
    Version 4.0.4.1.3.0.0-2.0.21
    Build 21
    Date Sat May 22 16:25:36 PDT 2010
    Number of PassThru NICs are 0
    VEM modules are loaded
    Switch Name      Num Ports   Used Ports  Configured Ports  MTU     Uplinks  
    vSwitch0         128         4           128               1500    vmnic0   
    DVS Name         Num Ports   Used Ports  Configured Ports  MTU     Uplinks  
    vsm1yeni         256         51          256               1500    vmnic2,vmnic1
    Number of PassThru NICs are 0
    VEM Agent (vemdpa) is not running
    [root@sahaesx1 ~]# vemcmd show version
    VEM Version: 4.0.4.1.3.0.0-2.0.21
    VSM Version: 4.0(4)SV1(3)
    System Version: VMware ESX 4.1.0 Releasebuild-235786
    [root@sahaesx1 ~]#

    Ok. Now VEM and VSM speaks to each other. However I can not see VEM on "show module vem mapping" ? Is there any specific reason to that ?
    [root@iacm-1 tmp]# vem-health check 00:02:3d:70:01:03
    VSM Control MAC address: 00:02:3d:70:01:03
    Control VLAN: 444
    DPA MAC: 00:02:3d:40:02:00
    The VEM-VSM connectivity seems to be fine.
    vsm1yeni# show module uptime
    ------ Module 1 -----
    Module Start Time:   Thu Oct 14 16:49:45 2010
    Up Time:             3 day(s), 23 hour(s), 45 minute(s), 6 second(s)
    vsm1yeni# show module vem mapping
    Mod     Status          UUID                                    License Status
    vsm1yeni# show module vem counters
    Mod InNR OutMI  InMI OutHBeats  InHBeats InAipcMsgs  OutTO OutTOC InsCnt RemCnt
    vsm1yeni#

  • Service not running logged an alert?

    Hello,
    There is a service on a Linux machine I don't want it to run.
    I am getting an alert from SCOM:
    Alert: SUSE Linux Enterprise Server 11 Process Klog Monitor Alert
    Resolution state: New
    Source: SUSE Linux Enterprise Server 11 (x86_64)
    Path: Server
    Last modified by: System
    Last modified time: 4/21/2014 6:54:58 AM
    Alert description: The KLOGD - Kernel Message Logging daemon on server Server is not running.
    I could disable the alert for this service on this server Server but anyway to prevent the server Server to send this information. I know in Windows if the startup type is set to "Automatic" SCOM is looking for a service running, if the Startup
    type is set to manual no check.
    Do we have the same type of check in Linux?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Dom,
    Doesn't work the same as Windows. Just override the monitor in the MP and disable it from monitoring the klog daemon.
    Regards,
    -Steve

  • Solaris 10 - print services not running

    Hi
    One of our servers has just been upgraded from Solaris 9 to 10 but we are having problems getting the lp scheduler to start. We have tried starting the service manually by issuing *'svcadm -v enable application/print/server'* which returns '*svc:/application/print/server:default enabled.*' However when you issue the command '*lpstat -r*' it returns '*scheduler is not running*'. The next step I tried was typing '*svcs -a | grep print*' which returned the following:
    online               16:34:09 svc:/application/print/ppd-cache-update:default
    online               16:35:39 svc:/application/cde-printinfo:default
    offline               16:34:45 svc:/application/print/rfc1179:default
    offline               16:34:45 svc:/application/print/ipp-listener:default
    maintenance    16:34:45 svc:/application/print/server:default
    I then issued the command '*svcs -v -x*' which returned the following:
    svc:/application/print/server:default (LP print server)
    * State: maintenance since Wed Dec 17 16:34:45 2008*
    Reason: Restarting too quickly.
    * See: http://sun.com/msg/SMF-8000-L5*
    * See: man -M /usr/share/man -s 1M lpsched*
    * See: /var/svc/log/application-print-server:default.log*
    Impact: 2 dependent services are not running:
    * svc:/application/print/rfc1179:default*
    * svc:/application/print/ipp-listener:default*
    I tried enabling the 2 dependent services manually and it says they are enabled after you issue the command but in actual fact it is not doing anything. Our set up is complicated by the fact that we are not using Soalris as our print m,anager but are using Hewlett Packard's.
    Any help would be greatly appreciated,
    Bruce

    This could be caused by print requests that were waiting in the print queue when the upgrade took place. You need to remove these requests as follows:
    # svcadm disable print/server
    # rm -fr /var/spool/lp/fifos /var/spool/lp/temp /var/spool/lp/tmp /var/spool/lp/requests
    # svcadm enable print/server
    # svcs -xv
    The print scheduler should now be running and you should now be able to print.

  • SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

    We are running SCOM 2012 SP1 and added a test Linux server running Red Hat Enterprise 6.3.  SCOM is reporting that the server is in Critical health because the following three services are not running.
    1) Process Rpcbind Service Health - Rpcbind Mapper Not Running
    2) Process Rpcidmap Service Health - NFSv4 ID Name Mapper Not Running
    3) Process Rpcstat Service Health - NSM Status Monitor Not Running
    My question is that are these services required to be running in order for SCOM to monitor the Linux servers properly?  If yes, can you please give brief explaination as to why so I can explain that to our Linux Administrator.  The Linux Administrator
    is saying that we do not run these services on any of the Linux servers because they are not needed.  If infact these services are not needed, how can I have SCOM ignore the critical error messages?  Thanks

    Yup, generally running. I'm assuming you've done a basic install of RHEL 6. All processes listed above are enabled by default on a RHEL 6 install if you take the default settings. If someone is just getting started you can pretty much guarantee
    they will do a basic install of RHEL 6 and this will not be an issue.
    Could it be done better... sure but at what point do you stop? We could discover all services running on the system and start monitoring them out of the box but what are important and what are not to each customer? The idea is to give you some basic monitoring
    on a default install based on what each OS provider starts on a "default" install. If this does not suite your needs SCOM is very configurable and adding a custom service monitor is very easy to configure along with disabling existing ones.
    If you'd like to provide feedback on this feel free to open a support ticket with Microsoft and file what we call a 'Design Change Request' [DCR]. We go though these prior to starting each update to SCOM. No guarantee it will get fixed/changed as we do have
    priorities but we are listening.
    Regards,
    -Steve

  • Mailbox Server Role Services not running: MSExchangeDelivery

    Running Exchange 2013 CU7 on Server 2012R2.
    Ive been working on this project on and off for the last few months, as I am the only IT guy, and a new office construction at my company has had me running cable, moving offices, workstations, and phones.
    This install of Exchange was working fine up until about a week ago. When I came back to finish its setup, I noticed that I was not able to send email internally anymore. Connecting to OWA says the message was sent, but it never arrives. After some more
    investigation, it turns out the MSExchageDelivery service will not run.
    Checking on this service, it indicates that it is starting/stopping, but never getting to the running stage. I have tried everything that I can think of, including uninstalling and re-installing the software. I have scoured the internet looking for solutions,
    but not finding one that will take care of the problem.
    Looking in the event viewer under Windows Logs -> Application I do see alot of information about MSExchangeTransportDelivery. Seems to be looping through a set of events....
    1. Error MSExchangeTransportDelivery Failed to start listening (Error: 10048). Binding: 0.0.0.0:475
    2. Error MSExchangeTransportDelivery This address is already in use. Binding: 0.0.0.0:475.
    3. Error MSExchangeTransportDelivery Inbound direct trust authentication failed for certificate %1. The source IP address of the server that tried to authenticate to Microsfot Exchage is [%2]. Make sure EdgeSync is running properly.
    4. Information MSExchangeTransportDelivery The service will be stopped. Reason TCP/IP socket error. The service will stop.
    5. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.TransportServerConfiguration has successfully completed.
    6. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Data.Directory.SystemConfiguration.MailboxTransportServer has successfully completed.
    7. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.X400AuthoritativeDomainTable has successfully completed.
    8.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.AcceptedDomainTable has successfully completed.
    9.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.ReceiveConnectorConfiguration has successfully completed.
    10. Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.RemoteDomainTable has successfully completed.
    11.Information MSExchangeTransportDelivery A configuration update for Microsoft.Exchange.Transport.TransportSettingsConfiguration has successfully completed.
    12.Information MSExchangeTransportDelivery We are doing a full mailbox database reload as part of routing tables loading due to: First read.
    Not sure where to go from here... any and all help is appreciated.

    You're getting a tcp socket error and This address is already in use. Binding: 0.0.0.0:475.
    Are you sure port 475 is not being used for some other service? Go to services and check if the
    MSExchangeTransportDelivery is
    currently stopped. If it is, open cmd and type netstat -ano and see if port 475 is showing up. If the MSExchangeTransportDelivery
    is stopped it should not show up, if it is then it's being binded somewhere else and prob causing a conflict.
    James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com
    Thank you for your help. MSExchangeTransportDelivery was stopped. When I ran the netstat command, it shows:
    TCP    0.0.0.0:475            0.0.0.0:0              LISTENING       1600
    TCP    127.0.0.1:475          127.0.0.1:35056        ESTABLISHED     1600
      TCP    127.0.0.1:475          127.0.0.1:35231        ESTABLISHED     1600
      TCP    127.0.0.1:475          127.0.0.1:35386        ESTABLISHED     1600
      TCP    127.0.0.1:475          127.0.0.1:35559        ESTABLISHED     1600
      TCP    127.0.0.1:475          127.0.0.1:35657        ESTABLISHED     1600
     UDP    0.0.0.0:475            *:*                                   
    1600
    So we can see that 475 is indeed in use. I followed this up with Process Explorer to find out what process had PID 1600. Turns out that a security dongle we use for network licensing is using that port. I will be moving the dongle to another server, and
    will follow up here when I have results.

  • Intel RST Service Not Running

    PLEASE HELP
    Since updating from Windows 8 to 8.1 I am experiencing performance degradation on my HP HPE-250f desktop PC (one HDD, NO RAID).
    In the past (Win 7 & 8), when I would occasionally notice performance degradation, the Intel RST icon in the system tray would have a yellow triangle with an exclamation mark in front of it and if I would hover over it, it would say “Intel RST service is not running”. I would then reboot the PC and performance would return to normal.
    Since updating to Win 8.1 everything stated in the previous paragraph is still true, except nothing changes after the reboot.
    I’ve tried right clicking on the RST icon and then opening the IAStorUI program, but the message “IASrorUI has stopped working” flashes on the screen then disappears and nothing changes.
    Any help solving my problem will be appreciated.

    Hi,
    Some versions of IRST have delayed startup.  This improves the startup time to get the desktop displayed.
    Try the lastest version of IRST.
    I have never experienced an performance degradation due to a delayed  IRST startup. However, your mileage my vary.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Windows Audio service not running

    I have just built my new computer, and I loaded up windows on it, and everything is working fine but the audio. I have the X over the audio and the "audio service is not running" error. I tried to start The Windows Audio service in the service
    menu, but when I do that, I click the audio button and the red X reappears. I know I have all the dependant services enabled, because I have read through many forum posts. So, just to sum things up, all dependant services are on, I get the X error, and whenever
    I start the Windows audio service it seems like its working but when I click the volume bar the X reappears over the icon.

    Hello,
    I recommend reposting your question in one of the Windows forums, depending on which OS version you are running.  For example, either Windows 7 IT Pro or Windows 8.1 IT Pro forums.
    - Christopher
    Until the Whole World Hears

  • Platform Service not running - Windows 7 Ultimate 32bit

    Network Magic v5.5.9195.0 tells me that the platform service is not running - however the Services snap in says that it is and alows me to stop and start it, but NM still tells me it is not running - it was working fine until a few days ago and has suddenly stopped..
    Any ideas?
    Regards

    Apologies I appear to have hit the wrong key and posted rather than next lined
    The event log has the following entry whenever I attempt to start the service either automatically or manually:
    Faulting application name: nmsrvc.exe, version: 11.2.9170.0, time stamp: 0x4a3c0a3f
    Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b29c
    Exception code: 0xc0000005
    Fault offset: 0x00022262
    Faulting process id: 0x10f4
    Faulting application start time: 0x01cbae50d400fae5
    Faulting application path: C:\Program Files (x86)\Common Files\Pure Networks Shared\Platform\nmsrvc.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 47565619-1a44-11e0-beb3-00241dd23cce
    Did you ever get a resolution to this problem?
    The problem started when I changed my router and Network Magic had to rebuild my configuration. Since then I have been unable to load a stable version of NM however many timkes I de-install/re-install
    PS
    I have Gigabyte EP43-UD3L motherboard, 4GB memory, 1GB LAN link, ADSL2+ with ST516V6 router/modem and a number of NAS devices & Netgear Professional gigabyte switches
    Derek GC White - Running Network Magic version -5.5..9195.0-Pure0 on Windows 7 x64 Home Premium on Wired Computer with Kasperky Internet Security (latest version)
    1GB Realtek PCIe NIC v 7.34.1130.2010 via Netgear GS105 Hub to Netgear GS108 Hub to Netgear SRXN3205 WiFi VPN Router to Draytek Vigor120 ADSL2+ "modem"
    GA-Z68XP-UD3, 8GB G.Skill Ripjaw DDR3
    RAID0 - 2 x OCZ Vertex 3 SSD
    RAID5 - 3 x 1TB Samsung Spinpoint F3 accelerated by 1 x Runcore mSATA SSD
    RAID 1 - 2 x 500GB Hitachi
    2 x ATi HD5750 Crossfire

Maybe you are looking for

  • Is there a discrete, limited space for apps on the macbook air?

    I bought a new "air" for my wife and she loves it but ...  Yesterday a message popped up about insufficient space for apps. The box popped up repeatedly and could not be dismissed.  Today, on "spec" I deleted the Google Chrome app and restarted the m

  • Using Roll Over Images for Hots Spots in DW CS 5

    Ok  I had this sort of working .. but what i am trying to do is have pictures pop up when the mouse rollovers a hot spot.   I do this with two layers and using the behavior window The full project is at http://www.kasdivi.com/pages/map.html...  ( tho

  • Oracle XML CLOB out of memory error

    I am running several of Oracle's XML tools to store large XML documents in Oracle. I am successful with a 3 MB file, but not with a 20 MB file. I get an "out of memory" exception in LobPlsqlUtil.class. The CLOB is accessed through the method CLOB.get

  • Chart(pie,bar,etc) not displayed in BI portlet

    Hi, I deployed one BI ReportUI portlet on a web center server successfully. But giving the report path as "/shared/myport/custInfo", the table displays properly but the charts not! I find that all charts are flash movies. How can I enable the chart f

  • Mac system - adobe download assistant "installing" but not opening

    I have a Mac operating system and am trying to download the trial Design premium. I have done it on a PC and had no problems. It is popping up in my downloads fine and when I click on it, I have a dmg. file that lets me click it. Then it says it is "