Topology veiw is not showing in CS mars.
Dear All, I have installed CS mars and discovered My lan switches through it. But it is not showing in topology veiw. Even topology itslef is not visible it is showing some errors.
Is there any java version to be installed in the client machine to get the topology veiw ...
please suggest a solution
thanks in advance....
Selva ...
Thanks Joe..
I am using CM 4.0.6 and have gone through the devices which will be supported in CM 4.0.13.There i can see the switch model of
Cisco Catalyst 2960-8TC-S Compact Switch
1.3.6.1.4.1.9.1.10061
But in this scenario i am using 2960-8TC-L .As you suggested CM 4.0.6 will not support 2960-8TC-L . Can you please confirm both 2960-8TC and 2960-8TC-L are same and still i can use CM 4.0.13 to support 2960-8TC-L switch model.I have referred below link
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_campus_manager/4.0.6/device_support/table/cm406sdt.html#wp1055128
Similar Messages
-
Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications
I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support -
Plz. help,table does not show value for one field
hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
<%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
<TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
<TR>
<TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>
<!--
<TD> ProblemDescription </TD>
<TD> Problem Comments </TD>
-->
</TR>
<%
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
//java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
s = "select * from Complains";
java.sql.ResultSet rs = stmt.executeQuery(s);
while(rs.next())
//getting data from database
empId = rs.getString("EmpId"); // out.print(" " + empId);
compid = rs.getString("ComplainId");
// out.print(" " + compid);
calltype = rs.getString("CallType");
// out.print(" " + calltype);
a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
%>
<TR>
<TD> <%=compid %> </TD>
<TD> <%=calltype %> </TD>
<TD <%=a %> </TD>
</TR>
<%
}//while loop
%>
</TABLE>
<%
}//try
catch(Exception ep)
out.println(ep);
System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarificationsHi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha -
Fiscal Year / Periods does not show properly in WebI and compunding
Hi,
I have few reports where I am using Fiscal Year /Period as filter.
I have created a Universe on the top of a SAP BI Query and did not do any customization.
Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
Do I have to do any step at Universe level or something else?
It seems that Fiscal Year / Period is compounding.
Is there any help?
Thanks
Bashir AwanIngo,
for thanks for igniting my thoughts in this regards.
Yes these values do exist in SAP BW.
It is some how compunding the values at filter level.
It does not let me see the whole value when filter screen popup in BOBJ.
In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
thanks -
Forms Web - Icons not showing up
Hello,
I'm running a form on the web, and I have several iconic buttons. The Oracle Developer 2000 book says that icon image files must be in .gif format, and must reside in the same directory as the html page. So I converted my icons to .gif and placed in the required folder.
On the icon property for each button, I am not specifying a path, just the filename with no extension.
The icon is not showing up. I tried setting the icon filename via set_item_property(button_name, icon_filename, filename)
ON_NEW_BLOCK_INSTANCE and placing the path to where the html file is located. The icon will not show up.
Help?
Marie
nullHi ,
U have to update the in registry.dat file
set default.icons.iconpath=/icons/
and map this virtual directory /icons/
in web listener setting with Physical
directory of ur Icons.
null -
Audible books not showing up in home sharing
On my new mac mini I brought some books from Audible they appear in iTunes
under "Books" but they do not appear under the home sharing and I am unable to tranfeer
them to my older machine where I keep my media filesGuess I should have looked at FAQ first looks like Apple does not allow us to do this
Re: All audiobooks do not show up in home sharing
Mar 15, 2011 8:13 PM (in response to Carol G)
Just in case anyone else has this problem, here is what Apple replied to me: "Dear Carol, Greetings from Apple iTunes Customer Support. I am Sayantan and I am glad to assist you today. I understand you are unable to share audio books using home sharing. I know how upsetting it can be. I will help you with this. Unfortunately, you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. In accordance with iTunes Store policy, you may share the music in your library and playlists with up to five other computers, provided the following conditions are met: 1. Your computer is using Mac OS X version 10.4.11 or later, Windows XP, Windows Vista or Windows 7. 2. The other computers are on the same local area network as your computer, in the same subnet. To share a song in a password-protected shared library or playlist, you will need to enter a password. To share a song that was purchased using an iTunes Store account that is not authorized on the computer you are using, you will need to enter the Apple ID and password with which the song was purchased. You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files. To prevent other computers on your network from seeing or listening to songs in your library or playlists, turn off music sharing. More detailed instructions about sharing music may be found in the Help menu. In iTunes, select iTunes Help from the Help menu. Click "Contents," type "sharing" (without quotes) in the search box, and press Enter. To read more about one of the topics that appears, double-click it. Carol, thank you for being a valued customer, your satisfaction is of the utmost importance. If you have further queries please write back to me. I will be happy to help you. Have a great day! Sincerely, Sayantan
iTunes Store Customer Support" Message was edited by: Carol G
MacBookPro 2.4 GHz, 4GB RAM, 256GB SolidStateDrive,, Mac OS X (10.6.6), Intel iMac +500GB ext.HD, 64GB iPad, 32GB iPodTouch, 32GB iPhone 4
All audiobooks do not show up in home sharing -
Hi all,
I would appreciate any help for the following problem that I am facing.
I have created master-detail pages sharing the same AM.
The details page shows details of the request from 3 different VOs.
The VOs are entity-based and I modify the VOs using the setwhereclause for my purpose.
The master page runs fine and shows the searched request but when I goto the details page, it renders correctly but does not show any data.
Thanks in advance.Hi,
Thanks for the reply.
The view instance and view attribute to the details page columns are already set.
To add to the information,the AM is also used by othe pages for logic calcuation.
After executing these pages for one of the request, when I use ther master detail page for ther same request, it works.
But for the other requests, the details page does not return any data.
I suppose this is linked with EO not getting updated/refreshed with the new search request in the master details page.
If this is supposedly the reason,then how can I refresh the EO for each master detail search?
Has anybody encountered this issue before?
--Riyaz
Edited by: mriyaz on Mar 7, 2009 12:29 PM -
Excise base not showing in ARE1 & ARE3 docs
Dear All,
When I am creating ARE1 or ARE3 document then under item details, the duty rates & excise base value is not showing in the system thou the Excise duty values are coming correctly.
Due to above I am unable to get it in the print out of ARE 1 & ARE3.
Can you please suggest that it can be due to what reason. Am I missing on some settings?
Thanks & Regards,
AntimaDear Antima,
There is nothing in J1ID.
I have a pricing procedure name ZSFELE for Export.
I went to CIN - Classify Condition Types and maintained ZSFELE alongwith the Condition Types of Excise., viz , JEXP , JECT & JAIX
I also set the Condition Category to H for Excise Conditions, JEXP ( 16% ) , JAIX ( 1% ) and JECT ( 2% ).
Now when i post Excise Invoice all by duty values are blank and is not getting calculated and also gets posted with zero value.
please let me know where i am going wrong.
Edited by: Sriram Santhanam on Mar 10, 2008 2:08 PM -
Business rule not showing the result
When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
We are on 11.1.2
and im making BRs through Calc Manager (Wizard Based)
Edited by: ar_aff on Mar 24, 2011 9:56 PMI think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;
-
Not showing any results V_V2 resheduling sales and stock transfer documents
My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AMHi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi -
Pl/SQL Error ORA-00904 not showing in Oracle SQL Developer
Hi,
I am new to Oracle and the various development tools available.
Whilst using Oracle SQL Developer we have come across a scenario where a PL/SQL package does not compile, but only shows warnings in the compiler log.
The same packeage when compiled using PL/SQL Navigator shows a much more detailed list of errors, and highlights the real problem.
Why does Oracle SQL Developer not show the following error?
PL/SQL: ORA-00904: "SERIAL_LINE_ID": invalid identifier
Regards
AdrianThere are various settings you can give to messages. (eg, informational, warning, severe).
Tools-PL/SQL compiler options.
Normally, just the first 20 messages are displayed.
Either change code to get rid of warning messages, or change settings to ignore informational and warning messages.
P.S. There is a dedicated sqldeveloper forum where your question should really have been posted.
Edited by: Keith Jamieson on Mar 9, 2009 1:45 PM -
EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2
Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Custom Subscreen Not showing on MM03
Hi,
I know it has discussed earlier but my question is as follows:
I have created the custom subscreen (created a new screen under SAPLZMGD1 Function Group, added the fields from a Ztable),activaated etc. I then change the screen sequence in IMG (21) Std Ind (Short) tabs-> Subscreen (added the prorgram name SAPLZMGD1 and screen number (9**) and it is showing in simulation mode in IMG. I also uncommented the PBO/PAI of the 9** screen and added a custom PBO module to process logic for MM03 ( loop at screen etc.).
But I am not seeing the subscreen on MM03. The program simply doesn't stop there, at all.
As mentioned before, the fields on the custom screen belong to a ZTABLE and that table is NOT a part of MARA/MARC etc.
My question is in order to show custom screen/fields on MM03, do the fields/table HAVE to be a part of standard tables (MARA, MARC etc.) through APPEND??
I really don't want to add Zfields to MARA/MARC through Append structure and rather use the custom table as a stand-alone unless there is no other way..
Any help would be appreciated..
ThanksHi,
i think it would be like this:
SPRO>Plant Maintanence and Customer service>technical objects>general data>set view profile for technical objects>select the screen group element for Equipment and add the screen in additional data 1.
Regards,
HImanshu -
Route not showing up in routing table.
I have my core switch connecting to my router which connects to our MPLS provider. My router has a BGP default route going to the MPLS provider edge router B* 0.0.0.0/0 [20/0] via 172.30.252.78, 1w4d .... This route is not showing up in my core switch. Shouldnt it show up as an eigrp ex default route? Can anyone assist me? my routing table for each device is below. Thank you!
Router
USJONELAWTN01R#sho ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 172.30.252.78 to network 0.0.0.0
68.0.0.0/32 is subnetted, 1 subnets
S 68.142.83.236 is directly connected, Null0
198.63.196.0/32 is subnetted, 1 subnets
S 198.63.196.103 is directly connected, Null0
64.0.0.0/32 is subnetted, 1 subnets
S 64.234.192.40 is directly connected, Null0
172.26.0.0/16 is variably subnetted, 3 subnets, 2 masks
D 172.26.82.0/24 [90/28416] via 172.28.82.10, 1w5d, GigabitEthernet0/1
[90/28416] via 172.28.80.10, 1w5d, GigabitEthernet0/0.1
[90/28416] via 172.28.80.9, 1w5d, GigabitEthernet0/0.1
D 172.26.83.0/24 [90/28416] via 172.28.82.10, 1w5d, GigabitEthernet0/1
[90/28416] via 172.28.80.10, 1w5d, GigabitEthernet0/0.1
[90/28416] via 172.28.80.9, 1w5d, GigabitEthernet0/0.1
D 172.26.80.0/23 [90/28416] via 172.28.82.10, 1w5d, GigabitEthernet0/1
[90/28416] via 172.28.80.10, 1w5d, GigabitEthernet0/0.1
[90/28416] via 172.28.80.9, 1w5d, GigabitEthernet0/0.1
172.28.0.0/16 is variably subnetted, 4 subnets, 2 masks
C 172.28.176.0/23 is directly connected, GigabitEthernet0/0.6
C 172.28.80.0/23 is directly connected, GigabitEthernet0/0.1
C 172.28.82.0/23 is directly connected, GigabitEthernet0/1
D 172.28.80.20/32
[90/30720] via 172.28.176.3, 1w5d, GigabitEthernet0/0.6
[90/30720] via 172.28.82.3, 1w5d, GigabitEthernet0/1
[90/30720] via 172.28.80.3, 1w5d, GigabitEthernet0/0.1
172.30.0.0/16 is variably subnetted, 6 subnets, 2 masks
C 172.30.252.78/32 is directly connected, Multilink1
C 172.30.252.76/30 is directly connected, Multilink1
D 172.30.252.114/32
[90/3415808] via 172.28.176.3, 4d00h, GigabitEthernet0/0.6
[90/3415808] via 172.28.82.3, 4d00h, GigabitEthernet0/1
[90/3415808] via 172.28.80.3, 4d00h, GigabitEthernet0/0.1
D 172.30.252.112/30
[90/3415808] via 172.28.176.3, 4d00h, GigabitEthernet0/0.6
[90/3415808] via 172.28.82.3, 4d00h, GigabitEthernet0/1
[90/3415808] via 172.28.80.3, 4d00h, GigabitEthernet0/0.1
D 172.30.254.24/32
[90/156160] via 172.28.176.3, 1w5d, GigabitEthernet0/0.6
[90/156160] via 172.28.82.3, 1w5d, GigabitEthernet0/1
[90/156160] via 172.28.80.3, 1w5d, GigabitEthernet0/0.1
C 172.30.254.25/32 is directly connected, Loopback10
C 192.168.202.0/24 is directly connected, GigabitEthernet0/0.1
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
S 10.192.254.0/24 [1/0] via 172.28.82.10, GigabitEthernet0/1
S 10.201.0.0/16 [1/0] via 172.28.82.10, GigabitEthernet0/1
S 10.200.1.0/24 [1/0] via 172.28.82.10, GigabitEthernet0/1
C 192.168.203.0/24 is directly connected, GigabitEthernet0/0.1
C 192.168.51.0/24 is directly connected, GigabitEthernet0/0.1
B* 0.0.0.0/0 [20/0] via 172.30.252.78, 1w4d
B 200.200.0.0/16 [20/0] via 172.30.252.78, 1w4d
B 201.1.0.0/16 [20/0] via 172.30.252.78, 1w4d
B 172.16.0.0/12 [20/0] via 172.30.252.78, 1w4d
B 198.30.0.0/16 [20/0] via 172.30.252.78, 1w4d
B 192.168.0.0/16 [20/0] via 172.30.252.78, 1w4d
Core Switch
TNLAW-TN1COREA# sho ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 10.192.61.1 to network 0.0.0.0
172.26.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.26.82.0/24 is directly connected, Vlan601
C 172.26.83.0/24 is directly connected, Vlan603
C 172.26.80.0/23 is directly connected, Vlan602
172.28.0.0/16 is variably subnetted, 4 subnets, 2 masks
D 172.28.176.0/23 [90/28416] via 172.28.82.3, 7w0d, Vlan2
[90/28416] via 172.28.82.2, 7w0d, Vlan2
[90/28416] via 172.28.80.3, 7w0d, Vlan1
[90/28416] via 172.28.80.2, 7w0d, Vlan1
C 172.28.80.0/23 is directly connected, Vlan1
C 172.28.82.0/23 is directly connected, Vlan2
D 172.28.80.20/32 [90/28416] via 172.28.82.3, 7w0d, Vlan2
[90/28416] via 172.28.80.3, 7w0d, Vlan1
172.30.0.0/16 is variably subnetted, 6 subnets, 2 masks
D 172.30.252.78/32 [90/3413504] via 172.28.82.2, 1w4d, Vlan2
[90/3413504] via 172.28.80.2, 1w4d, Vlan1
D 172.30.252.76/30 [90/3413504] via 172.28.82.2, 1w4d, Vlan2
[90/3413504] via 172.28.80.2, 1w4d, Vlan1
D 172.30.252.114/32 [90/3413504] via 172.28.82.3, 4d00h, Vlan2
[90/3413504] via 172.28.80.3, 4d00h, Vlan1
D 172.30.252.112/30 [90/3413504] via 172.28.82.3, 4d00h, Vlan2
[90/3413504] via 172.28.80.3, 4d00h, Vlan1
D 172.30.254.24/32 [90/130816] via 172.28.82.3, 7w0d, Vlan2
[90/130816] via 172.28.80.3, 7w0d, Vlan1
D 172.30.254.25/32 [90/130816] via 172.28.82.2, 7w0d, Vlan2
[90/130816] via 172.28.80.2, 7w0d, Vlan1
D 192.168.202.0/24 [90/28416] via 172.28.82.3, 7w0d, Vlan2
[90/28416] via 172.28.82.2, 7w0d, Vlan2
10.0.0.0/8 is variably subnetted, 4 subnets, 3 masks
S 10.192.254.0/24 [1/0] via 10.192.61.1, GigabitEthernet3/47
S 10.201.0.0/16 [1/0] via 10.192.61.1, GigabitEthernet3/47
S 10.200.1.0/24 [1/0] via 10.192.61.1, GigabitEthernet3/47
C 10.192.61.0/28 is directly connected, GigabitEthernet3/47
D 192.168.203.0/24 [90/28416] via 172.28.82.3, 7w0d, Vlan2
[90/28416] via 172.28.82.2, 7w0d, Vlan2
D 192.168.51.0/24 [90/28416] via 172.28.82.3, 7w0d, Vlan2
[90/28416] via 172.28.82.2, 7w0d, Vlan2
S* 0.0.0.0/0 [250/0] via 10.192.61.1, GigabitEthernet3/47Hello,
The core switch has got a static default route pointing to 10.192.61.1. It has got a better AD value than the EIGRP routes.
Even if you are redistributing the BGP routes into EIGRP, EIGRP default route will not make it to the routing table because of the higher AD value than the static route.
However, you can view that it the EIGRP topology table. Check 'Sh ip ei topo'.
Krishna -
URL and Hostname of an entry in SLD do not show FQDN - ??
check out the screenshot here:
http://img247.imageshack.us/my.php?image=sldos0.jpg
All systems in our SLD look like that - they do not show fully qualified domain names for URL and Host. And I don't mean in the display of the hyperlink only, because the link target itself does not use FQDN either.
anyone know where SLD pulls the URL and Host info from??
Edited by: Jason Schweitzer on Mar 7, 2008 6:12 PMI found the answer myself. The popup help wasn't working on my system because of weirdness on my laptop. After I rebooted the help properly displayed the answer.
SystemHome
The name of the computer system that is most important for the system. By convention, the database host name is used. In the Java environment, the value can be got from the system property SAPDBHOST. This property is a part of the compound name of class SAP_J2EEEngineCluster. By default, host names in SLD are written lower case without any network domain.
Maximum length: 64
Maybe you are looking for
-
I receive pdf documents created by Oracle pdf creator and the Adobe Reader version 2.5 supplied with the Treo Pro opens blank pages. If I open them on my pc and resave them using Adobe Acrobat Pro then transfer them back to the Treo Pro I can view th
-
I would like to be able to share bookmarks live (from the Toolbar Bookmark) - i.e., use the laptop to select bookmarks from the PC toolbar. the laptop and PC are on the same network and network sharing could be enabled if required Many thanks Dan
-
Problem activating FaceTime on iPad
Unable to activate FaceTime on iPad. Valid apple ID not recognised
-
Hi all when activating Integration model in R/3 with APO below error is coming "Outbound queue blocked" System:APOCLNT800,USER DDIC 09.02.2008 13:28:15 Function:/SAPAPO/CIF_LOC_INBOUND Text:Host name: "XXXXXX"unknown/CPI-C error CM_Product. when we c
-
Which c650d is my psc16u-03g010? Which wifi driver for this laptop?
Which c650d is my psc16u-03g010? After installing windows 7 enterprise 64bit or 32bit the wifi doesn't work. Which driver should I download and install to solve this problem? This is occuring on all 5 of these laptops.