Tor daemon will not start up on boot...
Here's the appropriate line from rc.conf, but it will not start unless I enter it manually from the command line. I'm not even sure where else to look or debug, as I've never had any troubles with daemons before this.
DAEMONS=(syslog-ng cpufreq dhcdbd networkmanager tor polipo crond bluetooth cups hal fam alsa)
And as a related but less important question, does anyone know where tor logs are located by default? I tried setting up a relay but could not verify that it worked because I don't know where the logs are kept.
Last edited by fflarex (2008-03-03 03:42:23)
I'm afraid I don't really know what you mean. Care to give an example?
Anyways, I've found an error when I simply run 'tor' which could be the reason it does not start automatically. This error does not appear when I run 'sudo /etc/rc.d/tor start' (unless it is redirected to the log files instead, which I still haven't found). The error is:
Mar 06 13:17:58.439 [warn] Error setting to configured GID: Operation not permitted
Mar 06 13:17:58.439 [warn] Failed to parse/validate config: Problem with User or Group value. See logs for details.
As far as I can tell, nothing should be wrong at all with the groups and it is all set according to the tor documentation. This is really starting to bother me...
Similar Messages
-
OS X will not start in Safe Boot but it does start normally
I have not been able to install updates for TurboTax or Quicken; the updater hangs. Intuit customer support suggested trying to install them while the computer is in Safe Mode. Big surprise: it brings up the Apple screen and the spinner, but after a few minutes the computer shuts down.
It starts normally otherwise; just not in Safe Boot.but after a few minutes the computer shuts down.If your computer shuts down when attempting a Safe Boot, this means the filesystem check is failing.
You need to boot from your Install CD/DVD by holding the "C" key down while you restart. When the Installer appears you need to select Disk Utility from the menus (which menu it is on varies, do a search).
You can then choose the "First Aid" tab, and click the Repair Disk button. If you are lucky, it will report that it fixed some errors, in which case run it again until it says there are no errors. But given that Safe Boot does this automatically, you are more likely to get an error that it is unable to fix—at least you will see what the error is, and can post it here.
You may need to invest in a third party Disk Repair program like DiskWarrior to fix this. But you must fix it before attempting to install anything else. -
SunONE CS 5.1.1 HTTP Service will Not Start Automatically
Hello,
I have just upgraded from iPlanet Calendar Server 5.1 to SunOne Calendar Server 5.1.1. (great improvement). However, the HTTP service will not start automatically on boot anymore. But after the boot sequence, I can start in manually. There are no errors posted to the Event Log so I am not sure what exactly is happening here. Maybe an ICS.CONF setting? I am doing this on Windows NT Server 4.0, SP6a. Any help would be great - thanks.This is due to the fact that the directory server was not ready when the calendar needed it. I assume the directory server is running on the same machine as the calendar server.
What you have todo is the following :
you must create a dependancy between the http NT service and the LDAP NT service
- run regedt32.exe
- goto HKEY_LOCAL_MACHINE
- goto \system\currentcontrolset\services\iplanetcalendarhttpservice5
- you will see that this entry has alread an attribute with the name DependOnService
- click on it, and it will open
- add below tcpip the name of the service of the ldap. This service name can be found in the same
\system\currentcontrolset\services\
tree and begins with slapd-<instance-name>
when you reboot now, the http will wait until the LDAP has succesfully started before starting HTTP. -
I had avahi + cups working for a while back, but going to use it today and avahi-daemon will not start:
% ~ sudo systemctl status avahi-daemon
avahi-daemon.service - Avahi mDNS/DNS-SD Stack
Loaded: loaded (/usr/lib/systemd/system/avahi-daemon.service; enabled)
Active: failed (Result: timeout) since Mon 2013-07-15 12:03:33 EDT; 5min ago
Main PID: 2234
Status: "Server startup complete. Host name is air-laptop.local. Local service cookie is 81586563."
CGroup: name=systemd:/system/avahi-daemon.service
Jul 15 12:02:05 air-laptop avahi-daemon[2234]: Service "air-laptop" (/services/ssh.service) successfully established.
Jul 15 12:02:05 air-laptop avahi-daemon[2234]: Service "air-laptop" (/services/sftp-ssh.service) successfully established.
Jul 15 12:03:33 air-laptop systemd[1]: avahi-daemon.service operation timed out. Terminating.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Got SIGTERM, quitting.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Leaving mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.0.1.128.
Jul 15 12:03:33 air-laptop avahi-daemon[2234]: avahi-daemon 0.6.31 exiting.
Jul 15 12:03:33 air-laptop systemd[1]: avahi-daemon.service: Got notification message from PID 2234, but reception only permitted for PID 0
Jul 15 12:03:33 air-laptop systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack.
Jul 15 12:03:33 air-laptop systemd[1]: Unit avahi-daemon.service entered failed state.
All files in /etc/avahi/* appear to be defaults.
/etc/dhcpcd.conf:
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# To share the DHCP lease across OSX and Windows a ClientID is needed.
# Enabling this may get a different lease than the kernel DHCP client.
# Some upstream DHCP servers may also require a ClientID, such as FRITZ!Box.
#clientid
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
option interface_mtu
# A ServerID is required by RFC2131.
#require dhcp_server_identifier
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
noipv4ll
noipv6rs
Any ideas for investigation?
Last edited by nibblebot (2013-07-15 17:55:35)Ok, should have researched this more. This post https://bbs.archlinux.org/viewtopic.php?id=165913 led me to https://www.archlinux.org/news/filesyst … equired-1/
Basically, somehow, my /var/run was no longer symlinked to /run.
I ran the commands here after stopping all the services whose pids were in /var/run.
Then restarted and now avahi works again. -
Will not start even in safe boot after installing latest camera update
MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas? -
MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!
Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again
-
please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Oracle 10G Non-Network install - OEM will not start when on the LAN.
Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM -
My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
of iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
all my music and apps? ThanksIt won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
(100013) -
Firefox will not start until reboot
I am using FF newest version, win 7, etc. I have a very strange problem. Sometimes, once every 2-4 days, my FF will not start when the computer first start. That's when the computer cold boot, I click on FF and nothing happens. I looked in task manager and there is no "firefox.exe" running. If I reboot the machine, now it boots properly. I tried clicking on the shortcut on desktop, in "All Program" or navigate to the location of "firefox.exe" on disk. I have no fancy addon's. Google TB, Download helper, Ad block plus, and Skype addon, noscript, siteadvisor, DNA (bittorrent client for Asus), Chatzilla. Any suggestion on how I can diagnose/fix this problem? tx
Hello friend, i have a suggestion:
Sometimes my Firefox closes and the same thing happens... So I close the process, on the Task Manager (famous ctrl + alt + del on Windows) and start Firefox again. Try it!:D
[]'s -
My laptop will not start - it's telling me that "the logon user interface dll csgina.dll fail to loa
My Laptop will not start - it's a 4 year PC and it's runing on XP.
When I start I get this message" The Logon USer Interface DLL failed to load - Contact your administratoe to replace the DLL or restore the original".
How do I fix so I can start my windows.
Thanks,Hello -
Try this:
- When you receive the error message that is described in the "Symptoms" section, click Restart.
- Press F8 repeatedly as your computer begins to restart. This triggers the Windows Advanced Options menu.
- Use the arrows on your keyboard to select Last Known Good Configuration, and then press ENTER.
(Also, You can try Safe Mode and do a "System Restore" from there.)
***Last Resort, you will have to edit the registry and this may prevent your computer from booting***
- boot your system and tap away at F8
- Select Safe Mode
- After Windows loads into safe mode.
- Start >> Run >> “regedit” Press Enter.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
- Look for the GinaDLL Key
- Select and delete this key and this key ONLY. DO NOT delete the entire Winlogon folder of keys.
- Close Regedit with the RED "X"and reboot the machine
****Although I am an HP employee, I am speaking for myself and not for HP.****
****Click the White Kudos star to say thanks****
****Please mark "Accept As Solution" if it solves your problem**** -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
Imac 27-inch 10.9 recovery disk will not start
hello everyone,
I am having boot up problems on my imac 27-inch.
I pressed the power button and press and held the Option key, I chose the
Recovery disk, but the Recovery disk did not start, instead I have the grey Apple logo and it keeps running but will not start.
The imac 27-inch was bought refurbished in late 2010
I also have imac apple care from 2010 never used. First time problem.
On pressing the Option key during startup,
Mach Hard disk and Recovery Disk 10.9 is displayed.
Choosing mac hard disk does not boot up the OS instead I get a big Zero sign with line through it or a big flash question mark sign.
Choosing the Recovery Disk 10.9 does not boot up Disk Utility, instead I get the grey Apple logo.
Please help. Thanks.Your Recovery HD is damaged. You may be able to repair it using Carbon Copy Cloner 3.5.4. Under the Windowm menu select Disk Center. Select your boot volume from the list. Click on the Recovery HD tab then click on the Create a Recovery volume for this disk. Select Mavericks from the dropdown menu labeled "Recovery HD version to be applied." See if that works. If it does not then see Update - Create Lion RecoveryHD Partition Quickly Without Reinstalling | brunerd. Or see Recovery Partition Creator 3.7 – Updated for Mavericks ...
-
Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section
Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed. -
HT1455 What if my computer will not start up in safe mode? What next?
What is the remedy for a MacBook that will not start up in safe mode? The gray apple icon and progress wheel appear, I let go the shift key and the whole thing shuts off again. Please help. Thank you.
My understanding is that the Apple logo is produced by the disk and the spinning wheel shows that the software boot process has started.
1 - Shut down your Mac
2 - Press the power button to start and
3 - Immediately press and hold the Command (Apple) key and the S key
4 - At the prompt type the following and then hit return:
/sbin/fsck -fy
fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issues were found:
** The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 4 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do). When fsck reports that your volume is OK, type the following at the prompt and hit return:
reboot
Your computer should start up normally and allow you to log in.
Good luck.
Maybe you are looking for
-
RZ21 - ICM_HTTP_CONNECTION_FAILED when adding a new system
HI, I installed saphostagent on a sateliete system (Linux suse 10 with Oracle 11) to be able to monitor the system with our SolutionManager. Our Solution Manager is on 7.01 EHP1 support pack 8.(WIndows 2003 with SQLserver 2005) When I try to add the
-
i am using the following description to create a web service reference: web reference :REST Name :Yahoo Map URL :http://local.yahooapis.com/MapsService/V1/mapImage HTTP Method: GET Basic Authentication: No Add Parameter: Name Type appid
-
Hi, I just bought a mini Display port - DVI adapter + HDMI-DVI cable, but i notice some issues. I think the quality of image on my Full HD tv is worse than when i connect the MBP to the tv with the VGA cable. I tried to draw a single pixel on Photosh
-
I have forgotten my password for my iPhone 5 and I'm on holidays so i can't connect it to my desktop. How to i get into my phone?
-
Hi, Can any one explain the general process flow of Qm module.I have no idea on the Qm management. Thanks. -Santhosh