Torch 9800 ''email set up icon not responding'' ... unable to edit or set up email accounts.

Torch 9800, Network provider, O2 UK.
Although my BlackBerry service with O2 is connected and working as normal, I am totally without email on my Torch 9800. I have owned the Torch 9800 since March. All has been well until last week when I changed the password on one of the 3 email accounts I had set up on my device.  This password change left one of the accounts unable to send or receive mail, and is also what lead me to discover that I could not enter email set up on my device or via my network providers website ( www.o2email.co.uk ) .
I have spent hours on the phone with O2 discussing this issue. The usual checks and procedures have been carried out, battery pulls, checking settings etc and the service books have been deleted and resent several times. These actions have not resolved the problem but instead led to the loss from my device of the other 2 email accounts which were working correctly but have now disappeared into thin air. Having tried all possible solutions with O2 I now come here looking for an answer.
When I visit my Network Providers BlackBerry mail service trying to create an account using my pin etc,  I am without fail getting a pop up box containing  the error message ''Your account is not accessible via HTML browser. Please use your devive to access BlackBerry Internet Service''  !?  The result is the same whether I log in from my device over 3G or Wireless, or from a PC (have tried several browsers) .
On my device, when I click on the Email Accounts icon from the setup menu nothing happens, no response at all. I have tried many times and there is just no way to set up or edit mail accounts. I am without mail on my device and growing increasingly short of patience.
I am now hoping somebody here can offer me some advice on how to resolve this issue. What use is a BlackBerry without email capabilities ? I see from researching email set up problems on the Torch 9800 that I am not alone here so if somebody at BlackBerry is listening ? If this is a Torch 9800 issue then I am sure you will be doing all you can to resolve this but in the meantime PLEASE help by offering a solution to the issues I have mentioned.
Thanks
BlackBerry is for Life not just for Christmas
Solved!
Go to Solution.

Welcome to the forums, bs342!
Well, since you searched the forums, you are undoubtedly aware that the problem you report is unfortunately a common one these days.  The good news is that RIM is definitely aware of and working on the problem.
First, let's try something on your computer.  What browser are you using?  Your problem there might just be as simple as clearing cache in your browser, then closing and reopening the browser to try the website again.
If that doesn't work, try this:
From your device's browser, go to mobile.blackberry.com. Select your country of choice, then go to Communicate>Email. Scroll down to Other Personal Email and click on Integrate Now, then Launch Email Setup. You should be able to integrate your e-mail accounts that way until RIM has fixed this issue.
Please let us know how it goes!
*** If I've been helpful please consider clicking the LIKE BUTTON beneath my post.
*** Please remember to mark your thread as "Resolved" by clicking on OPTIONS to the right of the post and selecting "Accepted Solution."

Similar Messages

  • HT1430 My email isnt working after updating iOS 6 I get a message - mail server not responding. Verify that you have entered correct account info in settings.- which I have Can anyone help me fix this?

    I recently updated both my iPhone and iPad to ios6 but since doing this I can no longer send or receive e-mails. I get the following message:-
    the mail server is not responding , verify that you have entered the correct account info in Mail setting -
    does anyone have any tips to correct this?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

    Ringer icon staying on,volume raise button not responding ,unable to turn phone on/off,phone now dead.!

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup..  Restore as New...
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 15 - 20 Seconds...
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • How do i reset security questions if i don't have a rescue email address and does not give me an option to set up a rescue address...

    how do i reset security questions if i don't have a rescue email address and does not give me an option to set up a rescue address...would I have to delete my apple ID and start again using old ID?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • Email Setup Icon not responding

    Its been very frustrating.
    The Internet Email Setup option in Setup of my bb torch 9800 is not responding. I have tried rebooting, wipeout, reinstall of OS, couple of times, but nothing works. And when i try exiting the setup, the phone freezes. I have read many of users facing similar problem, but seems like RIM is in NO mood to resolve this one so guess i can call my smartphone a DUMBphone instead or is there any resolution to this?
    Solved!
    Go to Solution.

    This issue actually does have a resolution. Follow the link below and follow the workaroud at the bottom. This issue normally occurs when you have to do a wireless update of your email client through your carrier. You will have to get in touch with your carrier to find out their <brand> though. Also make sure that EmailClient has the E and M capitalized.
    KB26055- Unable to access Email Setup after automatic update

  • Whenever I try to send an attachment from Express Scribe I get a message that my email is not responding, even though I have set up the email.

    Thunderbird email is not responding to my attachments from Express Scribe. I have set up SMTP, my ISP and tried every option and website of info known to me.

    Have you used the MAPI option?
    Is Thundrbird set as default email client?
    * http://www.nch.com.au/kb/10018.html

  • Email Setup: IMAP Server not responding

    Hi,
    I just got an iPhone and am trying to set up my Yahoo email account. I've tried multiple times and failed. The error message I'm receiving is "The IMAP server 'apple.imap.mail.yahoo.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server Field".
    I didn't have to enter any info for the incoming mail server (nor is there an option for it). Also, my phone's WiFi is working so I'm not sure what the problem is.
    Thanks!

    https://discussions.apple.com/message/5315446

  • Torch 9800 - Mobile Data and BIS not activated - Mail & Browse fail, Opera Mini is slow and MSN and Yahoo go in timeout

    I have a BB Torch 9800 with OS 6.0 Bundle 2534
    I had a contract with the Mobile Operator including the Data Package and everything was working fine, I have access to the mail through BIS, MSN Messenger and Yahoo Messenger was working Ok, as far as Whatsup. Also the Browser was working Ok.
    When I was on roaming I have settled “Roaming Off” in “Mobile Network Options” to just use Internet over Wi-Fi when I was under the Wi-Fi coverage.
    Then I’ve decided to migrate the contract to “Recharchable” and also decided to dismiss the Data Packet because of cost limitations. Now I have BIS in “not connected” state.
    Problem now is that I cannot get the apps working when connected to any Wi-Fi AP.
    Mail is not working. MSN & Yahoo returns the message “Unable to find the requested server” when attempting to login. The Browse is also not working and only Opera Mini seems to work but it takes several minutes to build a page.
    I’ve also tried to ping the AP and it rarely succeed, sometimes all attempts are failing, sometimes one attempt succeed.
    It seems to my eyes that there is a terribly big delay and some applications (except mail and browse that shows not to work) go in timeout with the message previously described.
    I’m not sure whether BIS access or no access is influencing the BB behavior with a Wi-Fi connection and making dramatically slower.
    The BB connects at Layer 1 with the AP because I can see the BB MAC address at the AP’s menu. I’ve tried also with DHCP Client and Manual IP configuration, no way.
    I’ve found at http://forums.crackberry.com/general-blackberry-discussion-f2/unable-find-requested-server-bb-9330-a... that it could be a bug in the 6.0.
    I’ve searched tons of forum postings and it seems no one has the clue of this problem. Unfortunately the Torch 9800 cannot be upgraded to the 7.x. this is really bad as it seems I have purchased a “dead” mobile phone.
    Of course I’ve tried with lots a different Aps. I’m a technician and I think I’ve done a proper troubleshooting before to come to this conclusion.
    Anyone has an update about this problem or, I have no other chance than throwing away this phone and purchase a nice Samsung Note II hopping not be blocked with another unexpected showstopper.
    Thanks in advance.

    The only two options available to you are adding BIS to your plan or continue using Opera which works outside of BIS (the BlackBerry browser does not).
    Cheers.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Pf status is not set and program not responding

    Hi all,
    At such a code, what is the problem and report is not responding:
    data : l_layout type SLIS_LAYOUT_ALV,
            L_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV," WITH HEADER LINE,
            LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
            G_UCOMMAND TYPE SLIS_FORMNAME VALUE 'ALV_USER_COMMAND',
            g_status TYPE slis_formname VALUE 'PF_STATUS_SET'.
    L_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
      L_LAYOUT-ZEBRA = 'X'.
      l_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
           EXPORTING
                I_PROGRAM_NAME     = l_repid
                I_INTERNAL_TABNAME = 'ITAB'
                I_INCLNAME         = l_repid
           CHANGING
                CT_FIELDCAT        = L_FIELDCAT[]
           EXCEPTIONS
                OTHERS             = 3.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
               EXPORTING
                    I_CALLBACK_PROGRAM = sy-repid
                    IS_LAYOUT          = L_LAYOUT
                    IT_FIELDCAT        = L_FIELDCAT
                   IT_SORT            = GT_SORT[]
                    I_CALLBACK_USER_COMMAND  = 'PICK'
                    i_callback_pf_status_set = g_status
                    I_SAVE             = 'A'
                    IS_VARIANT         = VARIANT
                   IT_EVENTS          = GT_EVENTS[]
               TABLES
                    T_OUTTAB           = ITAB[]
               EXCEPTIONS
                    PROGRAM_ERROR      = 1
                    OTHERS             = 2.
    Here when I did not comment g_status the program is not responding.
    What could be the problem?

    Hope this helps
    FORM list_view.
      g_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program = g_repid
                i_callback_pf_status_set = 'PF_0100'
                is_layout          = g_layout
                it_sort            = g_sort[]
                it_events          = g_events[]
                it_fieldcat        = g_fieldcat[]
                i_save             = g_save
           TABLES
                t_outtab           = IT_TABLE
           EXCEPTIONS
                program_error      = 1
                OTHERS             = 2.
      IF sy-subrc <> 0.
        MESSAGE e208(00) WITH 'Error: ALV Grid'.
      ENDIF.
    ENDFORM.                    " layout_build
    FORM PF_0100 using my_exclude.
      SET PF-STATUS 'PF_0100'. " EXCLUDING my_exclude. use is you want to exclude buttons
    ENDFORM.                "end custom PF Status

  • After sending email thunderbird gives a "not responding" message for about 2 minutes

    after sending an email thunderbird will not respond for approx 2 minutes.

    Do you use McAfee anti-virus software to scan emails?
    If yes, please read:
    * https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

  • TS3274 My Email is frozen - will not respond when touching the screen. How do I get the email to respond?

    My email screen will not respond to any touch - it's frozen one email. I can't delete it or move to another email.
    How can I get the email to respond?
    jdymon

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

  • The Adobe Flash storage setting panel does not respond?

    It stays in the middle of the video and does not respond whether clicking agree or disagree. Am using the latest version of Opera and have not had this problem until recently. How do I get rid of it?

    Hi, I guess this is (almost) the same for Windows 2000 users? I have several folders with older Adobe/Shockwave appdata in my German Windows 2000 installation, e.g. C:\Dokumente und Einstellungen\Hans-Jürgen Bardenha\Anwendungsdaten\Adobe\Flash Player and/or C:\Dokumente und Einstellungen\Hans-Jürgen Bardenha\Application Data\Adobe\Shockwave Player 11, created on the date or shortly after OS installation. So it's safe to simply delete them with all their content if you have this issue of a freezing Adobe Flash setting panel?
    By the way, I'm asking because I also experience freezing problems now with Flash content on sites that worked fine before the update to the latest plugin. Disabling hardware acceleration in v10.1. didn't help either, I'm using the newest Opera 10.60 final, but on a very old computer.

  • Bottom row of icons not responding to touch

    The bottom row of my icons (mail, phone, etc . ..) do not respond when I touch them. I have tried a restore vi iTunes and reseting by holding down the on/off and home button (Several times). I am at wits end. The slide to unlock works but not even the options under settings at the very bottom of the display. Not sure if anyone has seen this exact issue so I am posting a new topic.
    Thanks for all your help.

    That doesn't make any sense at all. If your phone was working prior to the 2.0 update and now it doesn't...it is a corrupt SOFTWARE load on your phone. 2.0 does not change the hardware. Last time I checked, all 1st gen phones are made the same way and have the same components (assuming there is not a component failure).
    If you guys are having problems...back up all your data....clean out your phone so there is nothing on it. *Re download* the update (WITHOUT INSTALLING), because you obviously have a corrupt version on your computer (reinstalling what you have is not going to fix the problem). Then install the update (Do not try and do it by downloading and installing at the same time). Once the firmware has updated...resync your data back into your phone.
    See if this fixes it. Myself and a few others have been posting every day about this method and so far no one has reported any problems when they update this way. I am continually amazed that people don't take this simple extra step to minimize errors (Given the fact that there has been so many problems posted in these forums).
    When new firmware is updated on a phone it backs up everything and wipes it out of your phone. Given that, why would you want to keep all personal data on the phone while it is updating? If you have several gigs of info it is only going to take that much longer to back it up, then erase, then install, then verify..etc, etc. and open the window for more things to go wrong (time outs, etc.)
    Should we have to do this? No...we should be able to just plug it in and go. But like I said, so far nobody has reported any issues updating using the method I have described above....so why keep doing the same thing over and over if it is not fixing your problem.

  • Can't read email, it comes up "not responding" whatever I do.

    Whenever I try to click on an email, to open or to delete and email, or click to scroll down on the emails, every time it comes up "not responding" so I'm unable to even access anything. I am not able to even write a new email.

    What is your anti-virus software?

  • Apple is sending a password reset to an email address that does not exist. How do I update the email? Can't find it in my account.

    Why is Apple sending an email to an address I can't find in my account??

    Agro1 wrote:
    Why is Apple sending an email to an address I can't find in my account??
    Apple will not send you password reset requests in an email. It is likely a phishing email trying to get your personal or security information. Ignore the request and send the email to trash. Do not provide any personal or security information in response to the email. Do not click on any links in the email.

Maybe you are looking for