TORCH 9800 " How to stop the DATA Wiping due to Problems with Password Input "
PHONE TYPE:
Torch 9800 (1256)
PROBLEM:
On Friday, April 5th ... after several attempts of inputting my screen password I was constantly told by the 9800 that the wrong password was being attempted; which I know I did input the right PW . [ I believe that one key pertaining to the PW string is faulty and therefore not accepting the right character ] . When I had suffered prior password issues after several attempts the 9800 indicated on the screen that I would be locked out for 15 minutes until I could attempt again. This time after attempting what I believe was 9 times I suffered a "OMG" (Oh My God) situation where-in I believe the screen indicated to me that information would be erased; at that point I saw a progressive bar appear on the screen with the word "WIPING" and I immediately opened the back of the phone and removed the battery to stop the wipe at 40%.
One hour+ later I inserted the battery back into the 9800 and once again the data wipe bar appeared on the screen and I pulled the battery to halt the wipe at 20%.
I went to the Blackberry Official web site and sought out any solutions to stopping the data wipe in the Torch 9800 manuals and other service areas and there was no mention of the data wipe. I sought out other web sites for solutions and there was none... I also referenced a number of Black Berry forums and found that there where mentions of the same issue I was experiencing BUT no solutions.
I then pulled my sim card and inserted it into another Torch 9800 I maintain as a backup and when I went to my Mac Book Pro to connect the alternate 9800 and transfer data to it from the Blackbery desktop manager I was told their was a system failure. I attempted several times to in the dialogue box to copy data and settings from another device and again a system failure appeared. I again went to BB Torch Forums and found out that there have been a number of issues with Apple Macs and back up and transfers of data to Torch 9800 .
On Saturday I contacted Telstra Mobile Technical support and was connected to a Black Berry technical solution specialist who after referring to their BB manual and speaking to colleagues informed me that they saw NO work around solution.
I am therefore appealing to Blackberry wisemen & women to inform me if there is a solution to either obtain my backup data from my Mac and or to halt the Torch 9800 from wiping out my data if I have been able to pull the battery from the device. I have been user of Blackberry devices from the pagers of 1999 and have owned and operated over 14 BBs since along with my wife who is now on her first.
I am looking forward to your reply.
Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
Professor Kenneth Morgan
Hi canadagoose
Welcome to BlackBerry Support Forums
Sorry to hear that you're experincing such issues !
canadagoose wrote:
When I had suffered prior password issues after several attempts the 9800 indicated on the screen that I would be locked out for 15 minutes until I could attempt again.
But this situation happens when you enter wrong password for your BlackBerry ID , but not with device password that a user set in his device :
KB24157 : BlackBerry ID lockout behaviour .
As you're an old user as you mentioned in your post , I think you will agree that BlackBerry are the most secure devices available , if we enter wrong password to many times ( By default 10 times ) then it will initiate a wipe process , which you cannot stop my any mean.
Sorry to say but there is no way or any workaround available to stop a device wipe after it is initiated .
Reading your backup issue , have you ever done a full backup or a custom backup which atleast include your address book ! If you have it then after a wipe you can restore it from those backup files.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
How to stop the data loads through process chains
hi,
I want to stop all the data loads to BI through Process chains where load happens periodic.
kindly suggest how can I proceed.Hi,
Goto RSPC find your PC and double click on START then change the timings, i.e. give starting date is 01.01.9999 like that Save and ACtivate the PC, it won't start till 01.01.9999.
Thanks
Reddy -
How to stop the data flow untill an event happens
hi
i have made a file\folderchooser and with the appropreate bean class
and instead of a actionEvent for the button i have captured
museclicked
the problem is how do i make the flow of data sleep till the mouse is clicked 2 times .
The main method
public static void main(String args[])
file_folder_chooser FFC=new file_folder_chooser();
FFC.show();
String fold=FFC.getSeleDirectory();
String file=FFC.getSeleFile();
System.out.println(fold+file);
this method gives me a nullpointer exception because the operation is not over and there is no value in getSelefile()//getSeleDirectory()
the solution that i found was to call Thread.sleep(15000);
which stops the flow for 15 secs and if the operation does not end, then i get the nullpointer exception again.
is there is a method to make all the threads sleep?
please help me to understand
thank you
vinayso here it is
it works both on mouse and enterkey
and the mouseEvent has to be debugged
import javax.swing.border.*;
import javax.swing.tree.*;
import java.util.zip.*;
import java.util.*;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class checker1 extends JFrame
public static JTree tr,tr1;
public static JFrame fin;
public static java.awt.List lis1,lis;
public static JTextField tfpath,tedir,tefile,tfsave;
public static String ab,ac;
public static String bb[],bc[];
public static JRadioButton dir ,singlefile,multiplefile,singledir,multipledir;
public static JPanel p6;
public boolean entkey;
public checker1()
try{
addWindowListener(new WindowAdapter(){public void windowClosing(WindowEvent windowevent){setDefaultCloseOperation(JFrame.HIDE_ON_CLOSE); dispose(); }});
bb=new String[20];
bc=new String[20];
setTitle("File menu");
tedir=new JTextField();
JPanel p=new JPanel();
p.setLayout(new BorderLayout());
JPanel p1=new JPanel();
JPanel p7=new JPanel();
JPanel p2=new JPanel();
p2.setBorder(new BevelBorder(BevelBorder.RAISED));
p2.setLayout(new FlowLayout(FlowLayout.RIGHT));
JLabel lb=new JLabel(" Present \\ Directory ");
p2.add(lb);
tfpath=new JTextField();
tfpath.setColumns(30);
tfpath.setEditable(false);
p2.add(tfpath);
JCheckBox cb=new JCheckBox("edit");
cb.setSelected(false);
p2.add(cb);
cb.addItemListener(new C());
JPanel p3=new JPanel();
JLabel lb1=new JLabel(" Filter's ");
p3.add(lb1,"West");
JComboBox cob=new JComboBox();
cob.addItem("java");
cob.addItem("class");
cob.addItem("htm");
cob.addItem("html");
cob.addItem("txt");
p3.add(cob,"East");
cob.addItemListener(new tellf());
p3.setBorder(new BevelBorder(BevelBorder.LOWERED));
p3.setLayout(new FlowLayout(FlowLayout.RIGHT));
JPanel p5=new JPanel();
JButton but=new JButton(" To File Root's ");
JButton qb=new JButton("Sort");
qb.addActionListener(new sorter());
p5.add(qb);
but.addActionListener(new ActionListener(){public void actionPerformed(ActionEvent e){
try{
lis.removeAll();
lis1.removeAll();
tfpath.setText("");
File f[]=File.listRoots();
for(int i=0;i<f.length;i++)
lis.add((f.toString()));
} }catch(Exception ew){System.out.println(ew);}
p5.add(but,"Center");
p5.setBorder(new BevelBorder(BevelBorder.LOWERED));
p5.setLayout(new FlowLayout(FlowLayout.RIGHT));
p6=new JPanel();
p6.setBorder(new BevelBorder(BevelBorder.LOWERED));
p6.setLayout(new FlowLayout(FlowLayout.RIGHT));
tfsave=new JTextField();
tfsave.setColumns(15);
tfsave.addKeyListener(new ketsave());
p6.setVisible(false);
p6.add(tfsave);
p7.setLayout(new BorderLayout());
JPanel p4=new JPanel();
p4.setLayout(new GridLayout(3,1));
p4.add(p3);
p4.add(p5);
p4.add(tfsave);
tfsave.setEditable(false);
p4.setBorder(new BevelBorder(BevelBorder.RAISED));
//p4.setLayout(new FlowLayout(FlowLayout.RIGHT));
p1.setLayout(new BorderLayout());
p.setBorder(new BevelBorder(BevelBorder.LOWERED));
p1.setBorder(new BevelBorder(BevelBorder.LOWERED));
tedir.setBackground(Color.white);
tedir.setText("te");
tedir.setForeground(Color.blue);
tedir.setColumns(15);
getContentPane().setLayout(new BorderLayout());
p.add(tedir,"North");
lis=new java.awt.List(10);//dir
lis.addActionListener(new RECOV());
lis.addKeyListener(new ressolver());
//lis.addMouseListener(new ressolver2());// yet to be debugged
p.add(lis,"South");
tefile=new JTextField();
tefile.setForeground(Color.blue);
tefile.setColumns(15);
p1.add(tefile,"North");
lis1=new java.awt.List(10);//files
lis1.addKeyListener(new ressolver1());
//lis1.addMouseListener(new ressolver3());// yet to be debugged
p1.add(lis1,"South");
if(ab==(null)){
tfpath.setText("");
File f[]=File.listRoots();
for(int i=0;i<f.length;i++)
lis.add((f[i].toString()));
else if(ab!=(null)){
tfpath.setText(ab);
File f1=new File(ab);
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
if(s[j].endsWith(tellf))
lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
else{
p7.add(p2,"North");
p7.add(p4,"Center");
p7.add(p1,"East");
p7.add(p,"West");
JPanel p8=new JPanel();
p8.setLayout(new GridLayout(4,1));
singledir=new JRadioButton(" singleDirectory FILTER ");
p8.add(singledir);
multiplefile = new JRadioButton(" Multiplefile FILTER ");
p8.add(multiplefile);
multipledir = new JRadioButton(" Multipledir FILTER ");
p8.add(multipledir);
JRadioButton saveP = new JRadioButton(" save Panel ");
p8.add(saveP);
ButtonGroup group1 = new ButtonGroup();
group1.add(multipledir);
group1.add(multiplefile);
group1.add(singledir);
group1.add(saveP);
multipledir.addActionListener(new muldirfil());
multiplefile.addActionListener(new mulfilfil());
singledir.addActionListener(new singledirfil());
saveP.addActionListener(new savep());
getContentPane().add(p8,"East");
getContentPane().add(p7,"West");
pack();
show();
// Thread.sleep(20000);
}catch(Exception re)
{System.out.println(re);JOptionPane.showMessageDialog(getContentPane(),"an exception occcured"+re.getMessage(),"EXCEPTION",JOptionPane.ERROR_MESSAGE);}
public class sorter implements ActionListener
public void actionPerformed(ActionEvent e)
java.util.List l=new ArrayList();
java.util.List l1=new ArrayList();
String ss[]=lis.getItems();
for(int y=0;y<ss.length;y++){
l.add(ss[y]);
String ss1[]=lis1.getItems();
for(int y=0;y<ss1.length;y++){
l1.add(ss1[y]);
Collections.sort(l);
Collections.sort(l1);
int a=l.size();
int a1=l1.size();
lis.removeAll();
for(int y=0;y<a;y++){
lis.add((String)l.get(y));
lis1.removeAll();
for(int y=0;y<a1;y++){
lis1.add((String)l1.get(y));
public class savep implements ActionListener
public void actionPerformed(ActionEvent e)
tfsave.setEditable(true);
public class ketsave extends KeyAdapter
public void keyPressed(KeyEvent e)
if((e.getKeyCode())==KeyEvent.VK_ENTER)
ab=tfpath.getText();
ac=tfsave.getText();
setDirectoryName(ab);
setFileName(ac);
String sw=getDirectoryName();
String g3=getFileName();
// System.out.println(sw+g3);
public class ressolver1 extends KeyAdapter
public void keyPressed(KeyEvent e)
setEnterKeyStateName(false);
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(c+" "+q);}
lis.removeAll();
if((e.getKeyCode())==KeyEvent.VK_ENTER)
ab=tfpath.getText();
String ss[]=lis1.getSelectedItems();
int r=ss.length;
// System.out.println(ab);
setDirectoryName(ab);
if(r>1)
setFiles(ss);
else if(r==1)
setFileName(ss[0]);
else
setEnterKeyStateName(true);
String sw=getDirectoryName();
String g5[]=getFiles();
String g3=getFileName();
for(int y=0;y<g5.length;y++)
// System.out.println("selected File's are >>>>>> "+sw+g5[y]);
// System.out.println("selected File is >>>>>> "+sw+g3);
public class ressolver3 extends MouseAdapter
public void mouseClicked(MouseEvent e)
setEnterKeyStateName(false);
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(c+" "+q);}
lis.removeAll();
if((e.getClickCount())==3)
ab=tfpath.getText();
String ss[]=lis1.getSelectedItems();
int r=ss.length;
// System.out.println(ab);
setDirectoryName(ab);
if(r>1)
setFiles(ss);
else if(r==1)
setFileName(ss[0]);
else
setEnterKeyStateName(true);
String sw=getDirectoryName();
String g5[]=getFiles();
String g3=getFileName();
for(int y=0;y<g5.length;y++)
// System.out.println("selected File's are >>>>>> "+sw+g5[y]);
// System.out.println("selected File is >>>>>> "+sw+g3);
public class ressolver2 extends MouseAdapter
public void mouseClicked(MouseEvent e)
setEnterKeyStateName(false);
lis1.removeAll();
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(c+" "+q);}
if((e.getClickCount())==3)
ab=tfpath.getText();
String ss[]=lis.getSelectedItems();
for(int y=0;y<ss.length;y++)
ss[y]=(ab+ss[y]);
//System.out.println(ss[y]);
int r=ss.length;
if(r>1)
setDirectorys(ss);
else if(r==1)
setDirectoryName(ss[0]);
} else{}
setEnterKeyStateName(true);
String sw=getDirectoryName();
String g5[]=getDirectorys();
for(int y=0;y<g5.length;y++)
// System.out.println("selected dir's are >>>>>> "+g5[y]);
//System.out.println("selected dir is >>>>>> "+sw);
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(q);}
public class ressolver extends KeyAdapter
public void keyPressed(KeyEvent e)
setEnterKeyStateName(false);
lis1.removeAll();
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(c+" "+q);}
if((e.getKeyCode())==KeyEvent.VK_ENTER)
ab=tfpath.getText();
String ss[]=lis.getSelectedItems();
for(int y=0;y<ss.length;y++)
ss[y]=(ab+ss[y]);
//System.out.println(ss[y]);
int r=ss.length;
if(r>1)
setDirectorys(ss);
else if(r==1)
setDirectoryName(ss[0]);
} else{}
setEnterKeyStateName(true);
String sw=getDirectoryName();
String g5[]=getDirectorys();
for(int y=0;y<g5.length;y++)
// System.out.println("selected dir's are >>>>>> "+g5[y]);
//System.out.println("selected dir is >>>>>> "+sw);
try{
synchronized(c)
c.notifyAll();
c.removnot();
}catch(Exception q){System.out.println(q);}
public class keylis extends KeyAdapter
public void keyPressed(KeyEvent e)
if((e.getKeyCode())==KeyEvent.VK_ENTER){
lis.removeAll();
lis1.removeAll();
File d=new File(tfpath.getText());
File f1=new File(d.toString());
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
if((s[j].endsWith(tellf))&&((s[j].indexOf("$"))==-1))
lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
public class C implements ItemListener
public void itemStateChanged(ItemEvent e)
int ss=e.getStateChange();
if(ss==1){
tfpath.setEditable(true);
tfpath.addKeyListener(new keylis());
tfpath.setToolTipText(" Write The Dir And Only The Dir");
else{
tfpath.setEditable(false);
public class mulfilfil implements ActionListener
public void actionPerformed(ActionEvent e)
tacle=2;
tfsave.setEditable(false);
lis.setMultipleMode(false);
lis.removeKeyListener(new ressolver());
lis1.setMultipleMode(true);
static int tacle=1;
public class muldirfil implements ActionListener
public void actionPerformed(ActionEvent e)
tacle=3;
tfsave.setEditable(false);
lis.setMultipleMode(true);
lis1.removeKeyListener(new ressolver1());
lis1.setMultipleMode(false);
lis.removeAll();
lis1.removeAll();
File d=new File(tfpath.getText());
File f1=new File(d.toString());
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
// if(s[j].endsWith(tellf))
// lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
System.out.println();
public class singlefilfil implements ActionListener
public void actionPerformed(ActionEvent e)
tfsave.setEditable(false);
lis.removeKeyListener(new ressolver());
lis1.removeKeyListener(new ressolver1());
lis.setMultipleMode(false);
lis1.setMultipleMode(false);
tacle=1;
public class singledirfil implements ActionListener
public void actionPerformed(ActionEvent e)
tfsave.setEditable(false);
lis.removeKeyListener(new ressolver());
lis1.removeKeyListener(new ressolver1());
lis.setMultipleMode(false);
lis1.setMultipleMode(false);
lis.removeAll();
lis1.removeAll();
File d=new File(tfpath.getText());
setDirectoryName(d.toString());
File f1=new File(d.toString());
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
// if(s[j].endsWith(tellf))
// lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
tacle=4;
System.out.println();
public class RECOV1 implements ActionListener
public void actionPerformed(ActionEvent e)
String ss=lis1.getItem(lis1.getSelectedIndex());
String sq=tfpath.getText();
ab=sq;
if(sq.equals(null))
sq="";
tefile.setText(ss);
ac=ss;
ss=sq+ss;
public static String tellf="java";
public class tellf implements ItemListener
public void itemStateChanged(ItemEvent e)
String ss=(String)e.getItem();
tellf=ss;
lis.removeAll();
lis1.removeAll();
File d=new File(tfpath.getText());
File f1=new File(d.toString());
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
if(tacle==1){}
else if(tacle==1){}
else{}
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
if(tacle==1){}
else if(tacle==1){}
else{}
if((s[j].endsWith(tellf))&&((s[j].indexOf("$"))==-1))
lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
public class RECOV implements ActionListener
public void actionPerformed(ActionEvent e)
String ss=lis.getItem(lis.getSelectedIndex());
String sq=tfpath.getText();
if(sq.equals(null))
sq="";
tedir.setText(ss);
ss=sq+ss;
tfpath.setText(ss);
lis.removeAll();
lis1.removeAll();
File d=new File(tfpath.getText());
File f1=new File(d.toString());
if((f1.exists())==true)
String s[]=f1.list();
for(int j=0;j<s.length;j++)
File f2=new File(f1+"/"+s[j]);
if(f2.isDirectory())
byte b[]={92};
String s0s=new String(b);
lis.add(s[j]+s0s);
else
if((s[j].endsWith(tellf))&&((s[j].indexOf("$"))==-1))
lis1.add(s[j]);
else
JOptionPane.showMessageDialog(getContentPane(),"DRIVE NOT ACCESSABLE","DRIVE ERROR",JOptionPane.ERROR_MESSAGE);
public void setFiles(String[] bs)
for(int i=0;i<bc.length;i++)
bc[i]="";
this.bc=bs;
public void setDirectorys(String[] bs)
for(int i=0;i<bb.length;i++)
bb[i]="";
this.bb=bs;
public void setFileName(String bs)
ac="";
this.ac=bs;
//System.out.println(ac);
public void setDirectoryName(String bs)
ab="";
this.ab=bs;
//System.out.println(ab);
public String[] getFiles()
//for(int i=0;i<bc.length;i++)
//System.out.println("getf[] "+bc[i]);
return bc;
public String[] getDirectorys()
for(int i=0;i<bb.length;i++)
//System.out.println("getd[] "+bb[i]);
return bb;
public String getFileName()
//System.out.println("get f "+ac);
return ac;
public void setEnterKeyStateName(boolean b)
this.entkey=b;
//System.out.println("getd "+ab);
public boolean getEnterKeyStateName()
//System.out.println("getd "+entkey);
return entkey;
public String getDirectoryName()
//System.out.println("getd "+ab);
return ab;
public static checker1 c;
public void plsShow()throws Exception
synchronized(c)// for c.show
c.wait();
public void removnot()
ch1.setVisible(false);
ch1.dispose();
public static checker1 ch1;
public static void main(String args[])throws Exception
if(ab==null){ab=null;}
c=new checker1();
ch1=c;
c.plsShow();
System.out.println(c.getEnterKeyStateName());
if(c.getEnterKeyStateName()==true)
System.out.println(c.getDirectoryName());
System.out.println(c.getFileName());
Runtime t=Runtime.getRuntime();
Process p=t.exec("start "+c.getDirectoryName()+c.getFileName());
System.out.println(c.getEnterKeyStateName()); -
How to display the data in PDF format : problem is splitting into 2 lines
Hi ,
I developed one report which downloads the data into PDF format and saved in C drive but my problem is
in my program : Line size of the report is 255 in PDF it is splitting into 2 lines. it has to show in a single line. how to do it. how to reduce the width of the output? i am sending my code below. anybody can suggest me how to do it. if possible please send me the code.
my code:
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
vbeln type vbak-vbeln,
ERDAT type vbak-erdat,
ERZET type vbak-erzet,
ERNAM type vbak-ernam,
ANGDT type vbak-angdt,
BNDDT type vbak-bnddt,
AUDAT type vbak-audat,
VBTYP type vbak-vbtyp,
TRVOG type vbak-trvog,
AUART type vbak-auart,
AUGRU type vbak-augru,
GWLDT type vbak-gwldt,
SUBMI type vbak-submi,
LIFSK type vbak-lifsk,
FAKSK type vbak-faksk,
NETWR type vbak-netwr,
WAERK type vbak-waerk,
VKORG type vbak-vkorg,
end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
arcpar TYPE arc_params,
lay TYPE pri_params-paart,
lines TYPE pri_params-linct,
rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
'Date','Document Date','SD document category','Transaction group','Sales Document Type',
'Order reason'.
start-OF-SELECTION.
select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
FAKSK NETWR WAERK VKORG from vbak
into table itab
where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = dest
no_dialog = 'X'
immediately = ' '
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
no_dialog = 'X'
list_name = name
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
itab-ERDAT,
itab-ERZET,
itab-ERNAM,
itab-ANGDT,
itab-BNDDT,
itab-AUDAT,
itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spono
no_dialog = 'X'
TABLES
pdf = i_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
thanks,
maheedharhi tripat,
actual problem is what u said it is decreased the wiidht of the output.
now the output is:
Sales Document C Date Entry time Created By Quotation date Date Document Date
SD document category Transaction group Sales Document Type Order reason
62741 07/29/1996 11:54:38 DARLENE 00/00/0000 00/00/0000 07/29/1996 C
actual output is:
output should come in a single line. it is splitting into 2 lines.
thanks,
maheedhar -
How to config the proxy of Bpel process manager(with password)
HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ? -
How to reset the BIOS to solve a problem with DVD burner on Satellite P100
Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye -
How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload? -
How to stop the changes made for the BP in CRM not to update in R/3
Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram RaghuHello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72 -
How to stop the upload process?
Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
RaviHi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi -
How to stop the message "press 1 for ..."
Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message? You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message.
Thanks all!I took this problem to a genius. He removed the SIM card and added a new "blank" card from AT&T. Using this SIM we went to setting an turned cellular data off. Then we put the Apple SIM back in the machine. Now you can turn off the cellular so you will no longer get the messages. To end this practice, sign up with a carrier. Just click the button in the Settings... menu.
-
How to stop the process chain showing status as yellow but no process step
Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
ShubhangiHi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj -
How to stop the restructuring (ran manually) which is running in the backg
How to stop the restructuring (ran manually) which is running in the background.
Tried stop the data base from EAS , but got error message saying that it is not acceptiong any commands.The only way I know to do it is to stop the application through task manager(Windows) or Kill(Unix). First you have to figure out what PID it is, then kill it. It does come with risk of corrupting the application depending on what step it is in. If you go this route, you should clean up the new created temporary files (Otn, Esn, etc) Some newer versions don't need this last step and will clean up when the application restarts, but I'd rather make sure things look good myself.
-
How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks
Wiping my phone, restoring from backup, AND wiping all iTunes related files (from a search in Library and in Music) seems to have stopped this behavior.
(I couldn't wipe the iTunes files on the machine with my media and apps, but I did so on the other machine--where I only sync contacts, calendars and bookmarks. My iTunes library is empty there anyway.)
I don't know if this relates to an "app synching" issue that iTunes 9.0.1 fixed. Could be. -
How to stop the spinning wheel?
How to stop the spinning wheel?
Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish. -
How to stop the Debug-master-Beacon command from console
Q: How to stop the Debug-master-Beacon command from console
A:
-"Debug-master-beacon" This command is basically used to see the master beacon sent and the received .
-This command will help in figuring out master discover issues.
-You can run this command only from the console of the Ap.
- Once you run the command you can stop it only by typing the command
"No debug-master-beacon"
Sample command belowHi Shravanthi,
How the Substitution will work for stopping the user from changing the Depreciation key in asset master data. Can you please ellaborate in details.
Regards,
BABA
Maybe you are looking for
-
Hi I wants to records all inbound and outbound call to perticular IP Phone. Is it possible by monitoring the switch port of that phone ? Please let me know if there are any thired party softwares which can perform this task. Regards Shashi
-
How do I access https from a non administrator account?
I have my son set up as a user on the home iMac. I enabled parental controls. After installing 10.6.8, his account was unable to access https. I disabled parental controls and restarted. He was still unable to access https. I gave him administrator r
-
Business Objects Data Service notify Busienss Objects Reporting ?
Hi, Do you see me if it's possible to notify Business Objects reporting when the Business Objects Data Services has finishing these jobs ? It's a standard integration or customization in your side ? Thanks for your help Gilles
-
How to update column references.
Is there an easy way to make a reference to a data column update for when more data is entered into that column? Ex. =SUM(A1:A10) but then you add data to column A in cell 11, 12, and 13. Is there a way to make the SUM entry update to SUM(A1:A13)?
-
i know it soo stupid but someone please help me with this..i feel so guilty.. i swear im never logging on other ppl's ids ever again! i wasnt even spying! i was just playing map map if anyone would believe me..ohh pls help me folks..i need to cancel