Torch 9810 availability

Hello there,
I currently own a BlackBerry Torch 9800 on the Bell Mobility network in Canada.
I would like to upgrade to a Torch 9810 but Bell has discontinued carrying the model. How can I get a Torch 9810 phone?
I tried emailing [email protected] but it appears that RIM doesn't accept emails from customers. 
Thanks.

If Bell has discontinued it (which would be too bad 'cause it's a great phone), you'd have to either look at another carrier, i.e. Rogers, Telus or one of their discount brands, or look online for a used one.
I say put in the effort to get one; I'm using a Torch 9860, which also runs OS 7, and I'm glad I have it.
Cheers. 
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

  • I am very disappointed with my BlackBerry Torch 9810.

    I've been using BlackBerry phones since the past three years. I've used BlackBerry Curve 8520, BlackBerry Bold 2 and now, I've purchased Torch 9810.
    I purchased it on 21st of August, 2012. Not even 10 days since I bought it, it started to hang. I had to remove my battery and put it in again. I've been doing this everyday, now.
    It happens especially when I start the music player. The phone hangs.
    What am I supposed to do?
    Please help.

    You need to upgrade to the latest available OS v7.1, there is a big difference.
    Connect to your PC and run the BlackBerry Desktop Software. If you are given a notice to upgrade, cancel that, and FIRST do a complete backup of your device.
    Then, proceed with the upgrade.
    If you don't receive an upgrade notice, that means your mobile provider, Reliance, has not yet released it, but there are other upgrade routes. Post back, if needed.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Torch 9810 screen dont show up

    Hello, I have a weird problem with my blackberry torch 9810, all the lights from the kerboard and the 4 button (call, blackberry button, return button and turn off button) are on and also, the green light LED is on too but the SCREEN doesn't show up. If anyone knows what the problem and how to fix it please tell.
    <Personal Content Removed>

    OK, it appears that your phone is not going to boot properly.  The important thing to do now is to get it to connect to BlackBerry Desktop Software (available at www.blackberry.com/desktop if you don't have it installed yet on your PC).  Plug your phone in to your PC, open BDS and wait for your phone to connect.  The software might detect that you don't have a proper OS loaded to your phone.  Whatever message you get, please post back with it and we'll take it from there.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Ebook Reader for BB Torch 9810

    Please recommend best ebook Reader for BB Torch 9810?

    Hi,
    Trackpad has nothing to do with any of the applications installed or microsd card. My first recommendation is, if it still in warranty get it replaced, as it is related to BB manufaturing problem itself. Otherwise try to update it through Desktop Software, if there is any new update available.

  • Torch 9810 - Cannot Browse For New Podcasts

    Hello,
    This is my first post, but I have had a Blackberry for many years and love it.
    My current phone is a Torch 9810, OS 7.1 Bundle 921 (v7.1.0.267 Platform 5.1.0.230).  I recently decided to look into subscribing to some podcasts because I spend a lot of time commuting.  However, I cannot seem to browse for any suggested podcasts within the app, even though all documentation that I can find refers to there being an "explore podcasts" option in it. 
    I was able to manually add a podcast and download episodes for that podcast, but this option to browse through a suggested podcasts catalogue is nowhere to be found.  It makes it very difficult for me to find podcasts that I want to listen to if I cannot easily browse for something which catches my interest!
    The feature, seen at 0:27 in this video, which was uploaded only 4 days ago by RIM, is not present in my app, as you can see in this photo:
    The "add podcast channel" option only leads to a text box where I insert a URL or name that I already have for a specific podcast, no browsing. Even with the specific name of a podcast to add, this is a very cumbersome and constricting process, and eliminates the possibility of happening upon something new and interesting by chance, which to me is one of the primary appeals of podcasts.
    Any help I could get in resolving this discrepancy between what all documentation says should be available, and what I actually have access to, would be greatly appreciated!
    Thanks

    I have the same issue. I had 100+ podcasts but after a failed backup to computer they disappeared. What's worse is there is no option to browse for podcasts. The OS was updated too. Maybe the option is gone.

  • Torch 9810 arabic input keyboard

    How to add arabic laguage input keyboard to my torch 9810 ?

    Hello yahyakassem,
    Language package availability for your BlackBerry® smartphone is determined by your wireless service provider.
    For more information regarding this, see the following article:
    How to obtain language packs for BlackBerry smartphones - http://www.blackberry.com/btsc/KB13067
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Torch 9810 won't boot up or connect to Mac or PC. HELP!

    Hi,
    I have a torch 9810 that suddenly stopped working a few days ago!
    When I put the battery in, it begins to boot up and stops 1/4 of the way (on the grey bar on the bottom of the screen.) When I try to connect it to a computer it doesn't register. I run Mac OS 10.5.8, which is useless for most things now - I've never been able to get photos, etc, off of the phone using that OS and the blackberry software (I'd just email them to myself.) But I do have access to a friend's Mac, who runs 10.6.8 and it doesn't register there either. I also had a friend try it on their PC. I'm desperate to recover data - the ONLY video I have of my wolf, Samson - who dies 3 weeks ago, is on that phone. 
    Here's what I have done:
    Left the battery out for a long time and then re-inserted.
    Tried to connect on various operating systems of Mac and Windows.
    Ordered a new battery (the same thing happened.)
    So, is there ANYTHING I can do? @BlackberryHelp on twitter should be called @BlackberryNoHelp! 
    Has anyone had any luck with a data recovery service (for the same/similar issue)? If so, please recommend it.
    Thanks for your help!
    Shannyn

    First off, if you haven't done so, restart your Mac. Also, if you left your iPod plugged in overnight to your Mac, your iPod was powering the USB bus in your computer - and this is why your iPod battery is completely dead. Never leave your device plugged in when the computer is in sleep mode - all peripheral ports are turned off and battery powered devices will discharge.
    If you have managed to get your iPod charged, the it is time to tackle the iTunes/Apple Mobile Device Driver issues. See this article for tips on how to troubleshoot and resolve this problem - http://support.apple.com/kb/TS1747

  • Problem with Black berry ID with torch 9810

    I can not log in with my Blackberry ID from my Torch 9810 although the log in works via Internet.
    What could be the cause for this problem?
    Stefan

    You may check this Article and see if it helps
    Article ID: KB28212
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • OS update problem with BB Torch 9810

    Hi there
    I've got a problem with my BB device. It is Torch 9810 and recently a software patch has been applied ( version 7.0.0 bundle 1465 to bundle 2406 ). After the upgrade though BB device doesn't work properly, its screen freezes, some applications ( GPS in particular ) does not work, virtual keyboard sensitivity is poor etc. Hence I need to roll back to the previous version of software however rollback option on device is disabled. I can't roll back to the previous version using desktop software either.
    Please advice how to resolve the issue or provide me with a link where I can find previous OS version i.e. 7.0.0 bundle 1465.
    Regards,
    Krum Garkov

    Hi kgarkov and welcome to the BlackBerry Support Community Forums!
    Plug your BlackBerry® smartphone into your PC and go to www.blackberry.com/update.  When prompted to do the update, click on View Other Versions to choose an older version of software to install.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Blackberry torch 9810 wont start after blackberry protect updated

    got alert for blackberry protect update and installed up and went to reboot now . now my blackberry torch 9810 acts like it is restarting and will not come back on. need help asap!!!
    Solved!
    Go to Solution.

    Are you able to restart your device in safe mode as shown in KB17877?
    I assume, since it's caught in a reboot cycle, when you connect to the Desktop Software it doesn't take a stable connection to reinstall your software?
    If that is case, remove your battery and keep it out when you connect to the Desktop Software. You will get a pop up that the device can't connect and there should be Retry, Update and Cancel buttons. Select Update and you will then be able to reinstall the current device software version.
    When the load is progressing, you will see a step that says "Wait for device initialization". At this point, insert the battery and the reload should complete.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • OS7 browser problems on Torch 9810 (incl. dead touchscreen and migrating cursor)

    The browser on the Torch 9810 has two interrelated problems. On certain mobile sites -- The New York Times in particular -- one will suddenly be unable to use the touchscreen to tap open links and the cursor will remain constantly visible, slowly migrating upwards without any input from the trackpad. This usually happens right after the first time one opens a link on the sites in question. 
    Also, certain sites -- again, the NY TImes, and also ESPN -- display what seems to be generic mobile sites much different from the versions that one sees on, e.g., the 9800. I imagine that this is because the sites do not recognize the 9810 browser's user agent string.
    The first problem with the dead touchscreen and migrating cursor seems to be OS related, while the second one, I would guess, would seem to require mobile web site adminstrators or the like being made aware of the new user agent string.
    I have the 9810 on AT&T. An update from the shipping OS (7.0.0.261) to the most recent OS I'm aware of (7.0.0.336) did nothing to resolve the first problem. 
    I'm hopeful that RIM will promptly address these problems.

    Thanks for your response. I have already written the NY Times webmaster re: the user agent string. That site had a similar, but less annoying problem when the 9800 came out -- it recognized the 9800 as an iPhone. Presumably, they will address it. (I would not presume to tell the New York Times that it needs to be "more professional," however, unless you would presume to tell Le Monde that it needs to be "more professional." )
    I'm not at all sure, though, that the sudden lack of touchscreen response and permanent/drifting cursor problem that occurs after clicking on a link is the website's fault. In all cases, the generic mobile website is simply the same version that would be encountered if one visited the site on a dumbphone. A smartphone should not react this way when being dumped over to the "dumbphone" site. 
    While it may be the website's fault for not being able to adequately handle a new user agent string, and consequently dumping one over to the dumbphone site version, I would think it is RIM's fault for not designing the browser so that it would not react this way on such a dumbphone site. 

  • BlackBerry Maps on Torch 9810

    I just upgraded from a Torch 9800 to Torch 9810. When I open BlackBerry Maps I shows my current location but the BB button the return key don't do anything. On the touch screen the search and Get directions don't do anything either. I uninstalled the app and reinstalled it using BB Desktop and it is the same no change.  The only thing I can do is press hang up to get out of the app. But the app stays active. I can see it on switch applications and there is no way to close it.
    Has anyone else had this problem?

    I'm not sure if that's a common problem or not but because it's obviously a software glitch, you should try a battery pull if you haven't already.  Battery pulls are recommended quite often in these forums because they do wonders at solving many minor issues.  So with your phone powered on, go ahead and remove your battery.  You can then put it back in a few seconds later.
    Let us know if that helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • MIDlet-missing on torch 9810

    Hi there
    I have a BB torch 9810, every time I try to download bb application world from the bb website, I get a MIDlet-name missing message. I have tried rebooting, I cannot reinstall/update OS because my service provider does not allow me to. Please advise on how to solve the problem

    Hey Rodneyr,
    Welcome to the BlackBerry® Support Community Forums.
    We would suggest removing BlackBerry App World and then reinstall and test.
    1. Go to options.
    2. Select Device.
    3. Select Application Management.
    4. Highlight BlackBerry App World.
    5. Press the Menu key and choose Delete.
    6. Reboot and visit www.blackBerry.com/appworld.
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Play iTunes Movie on BlackBerry Torch 9810

    There is definitely no shortage of M4V to MP4 converter on the Internet. One of the best M4V to MP4 converter is called Tune4mac iTunes M4V Converter Plus, which is able to remove DRM control from iTunes M4V movie rentals and purchases and convert M4V to MP4 format supported by BlackBerry Torch 9810. It not only support BlackBerry but also support most pupular devices and formats. This M4V to MP4 converter runs on Mac OS X 10.5 Leopard, 10.6 Snow Leopard and 10.7 Lion.

    Ita really a good converter. It can also convert iTunes movies to other devices, like Apple iPhone, iPod, iPad, Apple TV, PSP, Zune, Xoom, Galaxy Tab, iRiver, etc.
    God is Great

  • Not able to download apps to my BlackBerry Torch 9810

    Hi everyone.  New BB user here.  Just picked up a BB Torch 9810.  Set up my BlackBerry ID and have no problem accessing pretty much everything - except App World.  When I attempt to download an app or go to the My World tab I get a legal notice regarding "BlackBerry App World and BlackBerry Payment Service..."  When I accept the agreement, nothing happens.  Won't let me download the app I've selected, just goes right back to the app description.  I try clicking on the My World tab and no matter how many times I accept the agreement it won't let me do anything; just keeps asking me to accept the agreement again.  I've already tried uninstalling and redownloading App World, yet I continue to get the error.
    I like the phone but without the ability to download apps it's fairly useless to me.  Any suggestions would be greatly appreciated!
    Thanks.

    susanra0918, please have a look at this discussion:
    http://supportforums.blackberry.com/t5/BlackBerry-App-World-General/ID-Login-to-App-World-Authentica...
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for

  • Remove "time" from Month view on Published Calendar

    I am trying to remove the time from published calendars when in the "Month" view. The time is not showing on ical on the computer... but shows up on the published calendar. This is taking up tooooo much room on the calendar. Thank you for any assista

  • URGENT!!! external hard drive not readable in Finder

    I have a G-Raid external hard drive. Yesterday I accidentally plugged out the cable while it was connected to the iMac. there was usual notice that "the disk was not ejected properly". What happens now is that whenever I plug it back via Firewire 800

  • After a successfull install, I can not launch oracle DB XE

    hello, I installed oracle db XE 10.2.0.1.0 on a centos 6.2 (~redhat) but I can't start it. I succeeded in launching it after the installation but after a reboot it is not launched (apex on my web browser gives me an error : page not found or similar)

  • Physical attributes for index on temp tables (using physical model)

    I need create index on temp tables. When I generate DDL, it includes physical attributes like 'LOGGING NOCOMPRESS NOPARALLEL'. I get error "ORA – 14451 (unsupported feature w/temporary tables)" I've to use physical model in OSDM. How do I get rid of

  • Completion Insight Won't Work After Changing Worksheet's Connection.

    I've noticed that with 3.1.07.42 completion insight seems unreliable and managed to track it down to being caused by switching a worksheet's connection. The completion insight functionality seems to remain stuck in the first connection. Steps to recr