Torch 9860 - Stuck on Boot (even after BBSAK)

First of all, 
Hi !
Now to the issue, 
I battery pulled my 3 weeks old Torch 9860. 
And it got stuck at 75% of the boot sequence.
Since this has happened I:
 - Left it for a day.
 - Battery pulled thousand times
 - Reloaded the software, Both 7.0 and 7.1 (twice) And BBSAK & Apploader both say it was successful.
Now I'm desperately looking for a solution !
Thanks in advance. I'm not English native but I'll get everything

Dude I got to be honest. after all the steps I've been through. This is the only thing that helped me:
http://forums.crackberry.com/blackberry-torch-9860-9850-f238/wiped-loaded-5times-but-still-freezes-7...
Could've helped you too

Similar Messages

  • Blackberry torch 9860 stuck on boot up screen

    My blackberry gets up to a certain point on the boot bar and then stops and stays there until I do a battery pull. People have said to connect to my computer to do an OS reset but unfortunately my mini USB port has broke, any ideas on how to fix this without connecting it to my computer, all replies will be much appreciated, thank you in advance!

    Dang.  if safe mode doens't work and a broken USB port, I don't know of a way of getting to the software.  Sorry!!!
    But you're with t-mobile?  Call and ask about their new Jump plan.  You may be able to get that phone replaced.
    www.t-mobile.com/JUMP
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • BB Torch 9860 Hangs during booting

    I bought a BB Torch 9860 a week back.  Yesterday night the handset got switched off  as the battery had exhausted. In the morning when I was trying to switch it on it was not coming on. I put on charging, there was no indication of charging for some time then it started booting. The booting indicator (the line which indicates that the handset is being booted) went half way and stopped. The system did not respond to switch off button. The battery was removed and put back to restart. Every time it boots to half line and hangs. Would request someone to extend help please.
    Regards, Tom

    Hey thomas_k_s,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest to do a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry Desktop Software to restore data to a BlackBerry smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • 4404 WLC stuck in boot loop after upgrade

    In prepping for the upgrade to 4.1.185.0 I've got two controllers at different sites stuck in a boot loop after applying 4.0.219.0. Units will not even get to the <ESC> option menu.
    ANy ideas?

    Did you clear the configuration on the controller by using Option 5 in the boot menu? This will corrupt the boot image. You should not choose the clear config (option 5) from the boot menu on controllers running 3.2.78.0, 3.2.116.21, 3.2.150.6 or 3.2.150.10, 3.2.171.5 or 3.2.171.6, 4.0.155.5 or 4.0.179.8 and 4.0.179.11.

  • Torch 9860 Stuck trying to update software

    Hello
    My Blackberry Torch 9860 is stuck on a software update. It gets to 10% of overall backup process and then just stops.
    I cannot get into anything or use the phone. I have pulled the battery out and it goes back to the same thing.
    Please help!

    Unplug your phone and start over again.  Shut down BlackBerry Desktop Software, unplug your phone, plug it back in to your PC, open BDS again and wait.  You'll probably be told that you have to reload your OS so go ahead and accept it.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Thinkpad Yoga S1 not charging and stuck at 800mhz - even after servicing

    After giving up and sending my Thinkpad in for service, it still (after being at the depot for two weeks!) still not fixed.
    I have to admit, I am dissapointed with Lenovo's service so far, it is clear the technicians did little to no diagnostics at all to confirm the issue was fixed.
    My issue is as follows:
    1) The computer will run INDEFINITELY on the power adapter.  This is NOT a case of a faulty power adapter (occurs with two different adaptors) or a faulty power port (again, the machine will run until the cows come home on the adapter.
    2) The computer is stuck at 800mhz.  I can get it 'unstuck' as long as it is unplugged and I toggle the multicore option in BIOS.
    3) Once plugged in, the CPU will return and remain at 800mhz, even if it is unplugged, shutdown, rebooted, etc.
    4) The battery will not charge.  The laptop will run off battery power if the battery has power (came back from the depot at 99%, down to 90% now) but will not charge the battery at all, only maintain the level.  This is the case whether the computer is in Windows, or turned off.
    This is Windows 8.1 by the way, so there is no option to set a charge level to maintain.  That being said, last time (before I sent it in) I drained it to < 50% and it still never charged, even when it hit 0% and the laptop stopped detecting the battery (but still ran off the ac adaptor).
    The unit also had some ghosting on the LCD, and it took me a while to convince the techs to swap it out.  I think my mistake was I wiped the unit, and so they were too lazy (?!) to actually test it, since once you use the computer for 5 minutes it was very obvious (I offered to send pictures, as I documented the issue but they declined).  That issue has thankfully been resolved. 
    This is the first "post-IBM" Thinkpad I've owned, and I have to say between this and that abysmal clickpad I am not impressed.

    I recently had this problem too with my Yoga S1 after a system driver update.  I noticed during the updates that I received a message that the BIOS update failed.  The message came and went very rapidly and the updates continued and completed with no problems.  Usually when a firmware update fails, nothing in the BIOS is really changed.  I turned the computer off and thought nothing of it.  The next time that I turned it on though I too had this problem.  After repeated pressings of the power switch and pressing the reset button it finally booted and seemed like all was good, until I did a reboot, and it started again.  After much more pressing buttons it finally did  boot again.  That's when I remembered the failed BIOS update.  I didn't trust the auto update program, so I went to Lenovo's site and dowloaded the latest firmware and attempted to update it manually.  When I ran the update program it failed again.  What I wound up doing was just keep trying.  After repeating the update program four or five times, it finally completed successfully.  I have no idea why it kept failing or why after many attempts it finally worked.  After the update finally worked the problem seems to have been resolved, at least it hasn't done it again,,,yet.  Hopefully this will give some others hope in that it can be resolved without sending it off if you can get it to get it to boot again. 

  • Iphone is stuck at boot logo after reset

    iphone 4s is stuck at the boot logo with the gray bar underneath after i reset it

    Try two more
    Sync your iPhone, iPad, and iPod with iTunes using USB
    If you can't update or restore your iPhone, iPad, or iPod touch

  • Iphone is stuck on boot screen after new IOS6 update

    Hi everybody. I have yet, another problem.
    When the new IOS (6) was released, i of course recived a notification on my phone about it.
    It said that the new operating system was out and my phone was ready to upgrade.
    My situation at the time was that i was not connected or even near any wi-fi for my phone to connect to, and i was on a data plan for my phone so either way the data would be downloaded and put onto my iphone
    (I have a regular iphone 4 BTW)
    I agreed to upgrade my phone and set it down to handle its business, checking occasionally on its progress, i noticed the progress bar sliding across and thinking: "Ok my phones ugrading, nice and easy, new IOS wonder what apple will fix for me."
    Then after a while of updating, my phone screen went black. I tried to turn it on and the "Connect to itunes" screen popped up.
    (This was a problem because i wasnt near a computer with itunes)
    After reaching one, I attempted to finish updating my phone when a bomb dropped on me.
    A pop up in itunes read. (Itunes has detected an iphone in recovery mode would you like to restore it.) or something like that) and this surprised me because I had alot stored on my phone
    contacts
    settings
    A TON OF MUSIC
    etc.
    And getting over the stress of my problem i restored it.
    leading to ANOTHER set of problems
    My phone being stuck on the apple screen upon activation
    I have tried everything to get my phone to its former glory but nothing has worked  I've held the buttons, ive searched many times on how and nothing has worked.
    SO please, if anybody knows what is happening and has ANY Experience please respond
    thanks.
    Vaughn

    So you updated the phone without first doing a backup.
    Now you want to recover the data that was not backed up?
    Ummmm.... there is nothing to recover.
    FYI, music has never been a part of a backup, it should already exist in the iTunes library on the computer that the device syncs with.
    Also, if the device had been used as designed, all your contacts, notes, calendar entries, etc would be synced with a supported application on the computer or a cloud service.  While this would not eliminated the possibility of data loss, it would certainly minimize the data lost.

  • Yosemite stuck on boot screen after attempted disk repair

    So I had and old 500Gb laptop hard drive lying around and a sata reader so I figured see if I could make use of a free 500 gigs. I plugged the drive in and it didn't mount so naturally I checked Disk Util. After attempting to mount the disk with no success, I attempted to erase it which resulted in the unable to write to last block error. Finally I figured I'll run repair and see where it gets me. Repair was taking forever so I saved the job for overnight. Before I went to bed I started the repair and let it run. At some point I woke up to a slight click of my entire system shutting down, followed by the startup chime. While concerned I didn't think anything bad would happen so I figured I would wait until morning to simply walk over and log in, but here is w the problems started. When I got to my computer in the morning it was still on the grey boot screen with the apple and the bar. I booted into recovery mode. Succeeded in repairing the external 500 gig drive then checked my Macintosh HD and ran repairs. A few small things were repaired and I expected it to boot fine, but no. I haves restarted many multiple times and given it a while to load, I have reset the p-ram, I have done everything i know how to do. I really need this computer for school, so a quick solution would be great. What happened and how do I avoid this in the future?
    Thanks,
    Thomas

    I rebooted my machine and was back to either getting stuck at 50% or just seeing a black screen. Both times I was using a Kensignton USB 3.0 Multi-Display Adapter as well as the Mini DisplayPort to DVI port. Once I power off (hold 10 second power button), unplug all external monitors, I'm able to boot into the OS.
    Currently running DisplayLink USB Graphics Software for Mac OS X version 2.3 Beta
    http://www.displaylink.com/support/mac_downloads.php

  • Won't boot, even after fresh OS install?!

    So, my MacBook Pro started crashing, didn't seem to follow a pattern, it would just randomly freeze. Then it got to the point of not even booting up. It would stay on the light grey screen with the Apple logo and the spinning wheel would stop.
    I booted it from the Snow Leopard OS disk to try and repair it, check disk permissions etc, crashed again (screen flashing very fast). Then formatted the drive (zero out all data) to try and get it a fresh and clean as possible, that completed, so went to install the OS, that completed, but when it restarted after installing it crashed at the same point, only now a darker grey screen wipes down telling me to turn off my machine.
    The hard drive isn't making any strange noises so I don't think thats the problem, but other than swapping that out for another one I have run out of ideas. Has anyone had a similar problem?
    It's a 17'' MBP (not unibody). Any suggestions would be appreciated.
    Thanks.

    If it crashed while booted from the installation disc, then you have a hardware fault. Take it to an Apple Store for testing.

  • Blackberry Torch 9860 stuck on software update help!

    I have a blackberry 9860 torch and its stuck on 18% on the software update, ive took the battery out twice , there no differnce and my blackberry desktop wont pick it up, id really appreciate it if someone could help me please !
    As soon as possible !
    Thank you !
    Solved!
    Go to Solution.

    If BlackBerry Desktop Software is not recognizing your phone, you're really out of luck; it's imperative that BDS connects to your phone.
    RIM has this to say about getting your phone to connect to BDS:
    http://www.blackberry.com/btsc/KB10144
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Stuck at boot screen after installing updates.

    I was prompted to install updates. Got a message stating that the updates couldn't be installed and that the system will be restarted. When booting it gets stuck at the apple screen with a spinning wheel. A progressbar appears for a while and ticks to about 5% and then disappears. If I leave it there nothing happens for hours except the computer getting very hot.
    I've tried to use keyboard commands to boot in either safe mode or from a CD but I can't get them to work.
    Using an Imac with a BT keyboard.
    Thankful for any suggestions.

    Jort Blanken wrote:
    I connected usb keyboard and mouse (not mac) and tried a lot of combinations (I dont have an options key).
    the equivalent to the options key on a winsloth keyboard would be alt.
    to eject the DVD, restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    see if that gets you a step further, then post back.
    JGG

  • P67A-GD65 (b2) stuck in boot loop after bad flash

    Hello,
    My mainboard is stuck, I can't open bios setup, (even tho it appears in f11 menu), and it won't boot on any device.
    I removed every hard drive and DVD, and tried to boot on DOS with a usb, but it won't even boot DOS, and no usb device appears in f11 menu (I tried every usb ports)
    And I can't enter bios setup (it just reboots)
    Initially I was trying to update my bios because some features I wanted were not in my old version. But I think Avast blocked the update program (E7681v43.exe opened in an usb) and when I restarted the bios flash failed, and my PC entered a boot loop. When I press f11, it's a new interface so some things in the bios updated.
    The only message I get when I put the E7681v43.exe and E7681IMS.430, or the files for v1j (oldest version before ivy bridge support) on a fat32 usb stick (tried formatted, and formated with Rufus), a red message appears saying "bios me updated ... file not found."
    Same thing if I try the MSIHQ flash utility, it doesn't work as my PC won't boot on the usb.
    I think my motherboard is bricked and the only solution is to send it to msi to get a working bios.
    My motherboard p67a gd65 (b2) (the one with bad sata 2 ports) and it doesn't appear in the product name list anymore to register it on msi...
    It was bought the on the 19th of January 2011, I hope I can still ask for msi for help!
    I'm looking forward to your opinions on my issue, and sorry for the long text.

    Quote from: Svet on 24-September-13, 17:50:38
    older b2 cannot be updated to the .4xx
    you have to send the mobo to be replaced with newer revision
    Thanks! do you know where can I ask for a replacement?
    I can't register it on msi, and when I ask a question and I give the serial number it just abords...
    I already send an email to msi France (I live in Belgium). But email are too slow usually.
    and what about the secondary bios, no way to repair primary bios with it?

  • Phone stuck in recovery even after restore :(

    hi guys, i just bought an iphone 3g in italy for like.. 3 weeks now, i've already downloaded alot of programs from the app store so it was kinda slowing down a bit, and since im lazy to reorganize them, i ended up using the restore function from the itunes.. after that.. my phone went crazy and is currently stuck in the recovery mode thingy.. there's a picture of a cable and itunes... i tried using restore again but it doesnt work at all....
    i havnt seen anything like this in this forum or over the site's i've visited... i hope u guys can help or atleast give me a clue on whats going on..
    thanks guys...

    Received excellent tech. support from Apple on this issue and after a full day of screwing around was able to get our Iphone up and working again without many of the aps and contacts that we have recently added. I'm an older guy and this reminds me of my early windows experience and not what I would expect from Apple. This is not a comment on the quality of the tech support but on the software glitches. Get it right guys or someone is on your heels who will!

Maybe you are looking for