Torch 9860 wont go into options and hangs.

My Torch will not let me into options. When I click on options it just hangs unless I press the hang-up button.
Each time I reboot it I get an uncaught exception error - No Application.
Its running the latest approved version of the OS from Orange. It also did this with he previous OS bundle so I do not suspect its a patch issue.

Hi dchitty,
I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
or
KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

My problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set sav

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple times

hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

Torch 9860 wont turn off completely

I bought a new Bb torch 9860 the day before. It was working perfectly fine untill this evening. It has now stopped turning off completely which it was doing very well before. Now it goes into a standby - like mode and quickly turns on when the red button is pressed. Earlier it used to take time in loading ( i know it's a time saver but what if i want to switch off my phone competely to give it some rest). I am unable to switch it off completely other than by the method of removing it's battery. Please, please help before i knock on the doors of the service centre, which i don't want to so soon otherwise my father would scold me for buying such a phone.
Also, it had stopped showing recent updates in bbm and was suddenly not playing any media file before this thing happened. These two have now been resolved but the turn off thing still wont work.

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
When pressing and hoilding the outer right button, there should be two options turn off or full power off. choose full power off.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

My BB Torch 9860 freezes while it reboots and refuses to turn on

My BB torch 9860 froze 4 days back while a normal hard reboot. it refuses to turn on freezes and a particular spot on the bar while rebooting. i cant update the software or do nothing as it requires the fone to turn and it refuses to do so. Please help.

kend487 wrote:
After making several attempt and spending many hrs I was able to make the update.
Once the update was completed my phone restarted and again its frozen in the welcome screen. I am not able to connect my phone to my PC. Its still the same. I restarted my phone, nothing works.
Is there anything else I can try.
Hi there,
Sounds like a hardware issue ! Still if you want to try then use BBSAK or JL_Cmder to wipe your device then load a fresh OS pack .Or first be sure that your battery is good enough then try those steps again :
( Credit JSanders )
1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device. BlackBerry Software Download Site
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Torch 9860 wont start, no flashing red light as well

the loading screen comes and hangs on about 80%, no red light flashing, it just sits on 80%, Please Help!!! I tried to update the device software with desktop loader, when the device is rebooted after installing it again sits on 80%
the destop loader come with a error message " unable to connect to the device"
Please Help!!!

Hello jvzaveri,
Welcome to the Blackberry Community,
As you said you tried to update the device software with desktop loader and The Desktop unable to Connect the device . I think you you have to use force detection of your device using application loader. Here is the Article of KB
which might be usefull to you How to Force the detection of Blackberry Smartphone using Application Loader .
There may be some software issue, try not to install too many apps ,install only that you really needs. Try it and let us Know.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Spot Channels in CS6 wont import into Indesign and Incompatable with CS5

File imports into Indesign but without spot channels.
File will not open in Photoshop CS5
By changing the spot color to Pantone Solid and resaving, I was able to open in Photoshop CS5, however the channel still did not import into Indesign CS5.
I resaved the file from CS5 and the file imported correctly into Indesign.
Windows 7 Home Premium 32
AMD Phenom 9850 Quad-Core 2.5GHz
4Gb RAM

You didn't use Pantone Solid, you most likely used Pantone+ Solid (which is a new book).
If you want to open that in Photoshop CS5, you'll need to copy the new book to CS5.
InDesign - they had several bugs relating to spot color channels, which they should be fixing.
But they too may need the new color book data.

My iphone wont go into menu and keeps saying iccid unknown what can i do

cant get into my menu on my iphone keeps saying no service and unknown iccid what can i do all it goes to is configeure then choose country and attach to itunes am mind boggled can someone please help me

Reboot iPad and computer.

A Hopeless product from Blackberry : BB Torch 9860

Hi all ( & BB authorities,if reading),
I don't understand how a company can let its product come in the market without even testing it. I am using Blackberry torch 9860 since one and a half year. This product has 'n' number of ridiculous and irritating bugs in it. Its 1 GHz processor gives actually 0.1Ghz performance. Just switch the applications one or two times and the screen freezes like hell. after 15-20 happnings of the same thing you feel like throw your BB on the floor. And what to say about those so called beautiful buttons at the bottom. Those never work. Neither menu button works nor back button. Its the worst thing in the handset. And solutions???? a battery pull which takes atleast 15 Minutes to switch on the handset again.. or like press call key for 1-2 minutes and back/menu key will work for 2 minutes. Literally laughable solutions.
I regret for wasting my money on Product like blackberry torch 9860.
Regards,
Dipesh

My wife and I used the 9850 for two full years, she still is, and I have friends on both the 9850/9860 who have none of the problems you're having.
Perhaps there's something we can assist you with, if you can explain in detail those issue.
Start with the exact OS version installed, found at Options > Device > About, third line down beginning with a "v.6.0.x.xxx", What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Would like to change my home page. I click on options and my general tab is blank with only the ok and cancel buttons showing. How do I fix this?

In options, under the general tab, it is blank all except the ok and cancel buttons. I can't change my home page. Please help.

Hi cor-el,
Thank you for your reply. Before I had seen your reply. I went into options and under general, all of a sudden it showed what should be there. I closed browser and did it again and it didn't show. It has been blank for roughly two months. Just seems funny that I ask a question and after all this time of not showing what it should, it does, to only be blank again.
I have also been trying to update the flash player. That comes up completely blank as well with nothing showing at all. I did this several times the day before I posted my question. That same day I also hit the reset button for firefox when I was having trouble trying to update the flash player.
I did as you said to do. Nothing has changed. Is there something else that I could try?

Combining optional and mandatory reviewers for HumanTasks

Hi,
for a review-process we'd like to implement the following behavior using humanTasks in SOA-Suite 11g (PS5): There is a list of reviewers that are divided into optional and mandatory reviewers. All of them review the document in parallel. The processes ends when all (optional+mandatory) have confirmed the document. If after some deadline all mandatory reviewers have confirmed the process shall continue. However we want to wait until all mandatory reviewers have confirmed.
NB: There is no rejection in this process.
I've thought of the following solution: We have to parallel stages "optionalStage" and "mandatoryStage". The optionalStage contains all the optionalReviewers (in Parallel), the mandatoryStage contains the mandatory ones (also in parallel). On the optionalStage I've put a "Limit allocation duration" of e.g. 8 hours.
This is working fine. However: What if I'd like to specify this value not fixed but by an expression? On the global level this is possible, however it seems to not be possible on the "participant" level. Also the XML differs:
<participants isAdhocRoutingSupported="false">
<parallel collaboration="false" name="ParallelStages">
<allResponders>
<defaultOutcome type="STATIC">APPROVE</defaultOutcome>
<outcomePercentage type="STATIC">50</outcomePercentage>
</allResponders>
<routingSlip>
<participants>
<stage name="optionalReviewers">
<participant name="optionals" expirationDuration="PT23H">
<resource type="STATIC" identityType="user">johannes</resource>
</participant>
</stage>
</participants>
</routingSlip>
<routingSlip>
<participants>
<stage name="mandatoryReviewers">
<participant name="mandatory" expirationDuration="PT23H">
<resource type="STATIC" identityType="user">jochen</resource>
<resource type="STATIC" identityType="user">thomas</resource>
</participant>
</stage>
</participants>
</routingSlip>
</parallel>
</participants>
there is just an attribute for the expirationDuration. However, for the global deadline, it is:
<expirationDuration duration="PT22H" type="STATIC"
useBusinessCalendar="false"/>
or in the XPATH-case:
<expirationDuration duration="'PT22H'" type="XPATH"
useBusinessCalendar="false"/>
Any ideas how I could achieve this behavior? (without too much programming)
Regards,
Johannes

thanks, but i have comments on that, suppose we have
4 optional arguments in a method not just 1, and we
have another methods on the same class, these have
also another optional arguments, i think we will
repeat writing each method header many times ( i know
not the body of the method, but the header also will
be confusing)??I'm not following your hypothetical situation here, but it doesn't change what I said earlier.
Here's Java's varargs, but, as I stated, it doesn't let you have N optional args.
http://java.sun.com/j2se/1.5.0/docs/guide/language/varargs.html
You don't have to create sigatures for every possible combination--and you shouldn't. It gets too messy. Just provide signatures for the most common cases, and one that includes everything, but allows the "optional" args to be null.

Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

That is your answer then.
Large is 960x540
Medium is 640x480 (or 720x480)
Mobile is probably 480x272.
It is offering you the sizes that make sense given the size of your source material.
As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

Torch 9860 - Does not allow me into options

My Torch will not let me into option. When I click on options it just hangs unless I press the hang-up button.
Each time I reboot it I get an uncaught exception error - No Application.
Its running the latest approved version of the OS from Orange. It also did this with he previous OS bundle so I do not suspect its a patch issue.

Sorry this post sin the wrong group

BB 9860 torch wont unlock pressing button and when it does the screen just keeps flickering

Hiya, i wonder if this is a common problem or its just my phone
I recently bought a BB torch 9860, it was working fine but now when the screen locks, when i press the unlock button on the top of the phone it does nothing and just says "Screen is locked, press the lock button to unlock" and all the screen does is lights up then goes off in like a flickering manner
obviously it shouldnt do this
When i take out the battery and put it back in the screen loads fine as normal (no flicker) but once its back on the home screen i just get this annoying lock problem and a flickering screen
Any help or information would be appreciated
Thanks dwain

Yes, it's normal behavior for the Voiceover function.
It's designed for the visually impaired. If it helps, try using your iPhone with your eyes closed. With the first tap, VO begins to read what is on the screen. When you hear the item that you want to select, tap the screen (anywhere) a second time.

BB Torch 9860 Hangs during booting

I bought a BB Torch 9860 a week back. Yesterday night the handset got switched off as the battery had exhausted. In the morning when I was trying to switch it on it was not coming on. I put on charging, there was no indication of charging for some time then it started booting. The booting indicator (the line which indicates that the handset is being booted) went half way and stopped. The system did not respond to switch off button. The battery was removed and put back to restart. Every time it boots to half line and hangs. Would request someone to extend help please.
Regards, Tom

Hey thomas_k_s,
Welcome to the BlackBerry® Support Community Forums.
I would suggest to do a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before restoring any data to the device.
If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
How to use BlackBerry Desktop Software to restore data to a BlackBerry smartphone from a backup file
http://btsc.webapps.blackberry.com/btsc/KB10339
If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Torch 9860 wont go into options and hangs.

Similar Messages

Maybe you are looking for