Torch Help! Screen not turing on but buttons and red light is flashing

Hi,
My torch has had the problem of screen functioning, it is just a black screen but buttons light up and led flashes red.
Thanks

I have tried this, blackberry works find but nothing id displayed on screen, just blackness. red light blinks and buttons are lighted up a if it is on.

Similar Messages

  • Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do?

    Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?

    Regarding your new Guest Account.
    If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
    The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do.

  • I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    Hi Cjroyle,
    Thank you for using Apple Support Communities.
    From your post I understand that your iPhone will not boot past the Apple logo on the screen.  To troubleshoot this issue I'd like you to please follow the steps in the article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

    I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle.  I had it on charge all night but still dead.

    Try here.
    iPod touch: Hardware troubleshooting
    You may have a hardware problem.

  • I am getting a msg that pllocked and connected to wifi. I can not hit the ok button and my apps are visible. Not able to use at all.

    I am getting a msg that my ipad hasnt been backed up in 2 wks. I have plugged in (at 100%) and locked and connected to wifi. I can not hit the ok button and my apps are showing in the back ground. Not able to use at all. How can I get my ipad working again.
    thanks,

    Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address.  To correct this you can reboot your router by unplugging it from power for about 30 seconds.
    It wouldn't hurt to also reset your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    See here for more troubleshooting assistance.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • The charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    the charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    Could be bad ram or logic board. Take it to an Apple store or AASP.

  • My blackberry curve 8520 is not turning on it shows a red light

    My blackberry curve 8520 will not turn on it shows a red light flashes 2x then my keypad lights an thats it nuthing else happens please help me i havent got a usb cable so cant use blackberry desktop manager

    Hello Hasanm52,
    Welcome to the community!
    Seems OS is corrupt, so you have to arrange a USB cable to connect your devci with the pc.
    Procedure to install OS:
    1.) Download and install blackberry device software of Blackberry 8520 from www.blackberry.com.
    2.) Install it in your PC & connect your device with PC.
    3.) Access path c:\prog. files\Common files\ Reasearch in motion\ App loader\ now dowble click on loader.exe
    4.) Further procedure i very user friendly, so please follow steps (may take approx 90 mins).
    5.) In between, it will prompt you to take backup as well, so do take care while clik next or continue.
    Good luck..!!!
    Before doing above activity you may try
    By pulling out battery & connect device with charger without inserting battery & wait for 5 to 10 mins.
    Itwill prompt you a no battery sign on your handheld, once you get the sign on your handheld, insert battery without un plugging charger 7 wait for another 5 to 10 mins. Hope this will work for you....
    otherwise you have to perform the first procedure, i mentioned...
    Thanks....!!

  • HP C5550. When turning power on, screen goes blank and front lights start flashing.

    When turning power on, screen goes blank and front lights start flashing. I have unplugged and changed ink cartrides. What next?

    Hello hmnshgrwl,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
    Best of luck,
    Mario

  • MY IPAD 2 WILL NOT LOAD HOME SCREEN.  HOLDING THE HOME BUTTON AND RESTORE BUTTON WONT BRING UP APPLE LOGO EVEN AFTER A MINUTE.  IT TAKES SCREEN SHOTS AND A BRIEF FLASH BUT THEN NOTHING.  IDEAS?

    I need help with the above question concerning home screen not loading and IPAD 2 won't reboot by holding home button and restore button for over a minute.

    Anyone? C'mom, I know some of you techie type folks know how to fix this!

  • IPad not responging to any buttons, and screen isnt responding

    When i tried to turn on my ipad 2 after a day of not using it, wheni turned iton the screen was swallowed by a grey wall, when it got close to the top, the wall moved back to the middle of the screen, and the part of the screen not swallowed goes from black to white and back, it repeats this 3 to 4 times then turns off, i have to hold the on/off button to get it on, the it repeats. no buttons are responding, and touch isnt responding. I cannot afford to fix, buti still want to know what is happenig. Thanks!

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Help screens not working

    Had to put Tiger back in after a failure on Leopard to make a good wireless connection, but now I have no help screens available at all. Is there any way to get them going short of putting it in again?

    You don't provide enough information to tell why this is happening.
    If you want to shoot in the dark, you can try resetting the Mac Help.
    This can be done with OnyX via Maintenance > Reset > Mac Help. Be careful with this tool: Uncheck what you don't want to be done.
    Or it can be done by hand. Dr. Smoke provides a walkthrough here.
    Hope this helps,
    --gregor

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • Screen is blacked out but calls and such still coming through...

    My screen is blacked out but I still hear texts, calls, alarms, etc coming through.  When I plug it in to my computer for a reset it doesn't identify the phone and there are no "portable devices" settings under "manage devices".  HELP please

    If you restored to factory defaults/new iPod (you did not say the type of restore your performed) and are still having the problem that indicates a hardware problem. An appointment at the Genius Bar of an Apple store is in order..

  • I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

    i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

    Hello Shailendras33,
    Congratulations on your new MacBook Pro!  Thank you for providing all the information about what is going on with the charging issue. 
    Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
    When you first connect your power adapter to your MacBook Pro, an indicator light on the
    MagSafe connector starts to glow.  An amber light indicates the battery is charging.  A green light indicates that the battery is fully charged.
    You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
    MacBook Pro User Guide
    http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
    It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting.  I recommend resetting your System Management Controller when something like this is occurring:
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

Maybe you are looking for

  • System Image Manager

    Where can I download the Windows System Image Manager? I want to setup a preinstallion image and I need to generate an answer file but I need the SIM.

  • Can't import photos from iPhone into iPhoto

    If i try to do a batch import, it says there's a problem downloading an image. If I try to import one image, it says the file is in an recognizable format. It's a jpg. Any ideas how I can get my photos and videos off my iPhone and why it won't import

  • PQH TABLES NOT BEING POPULATED BY EMPLOYEE SELF SERVICE

    For reporting purposes I need to create different reports listing all the transactions that are coming from Employee Self S ervice. As workforce tables are purged (i.g. wf_items) I need to create it using the pqh tables (i.g. pqh_ss_transaction_histo

  • Get-SCSMWorkflow ManagementPackObjectTemplate was not found

    When running the powershell command Get-SCSMWorkflow it list out a few of the Workflows and than gives the following error: Get-SCSMWorkflow : An object of class ManagementPackObjectTemplate with ID 7a68dba0-7999-43e2-1268-bf04bd06ed4c was not found.

  • Setting up repeating events for 5th sundays

    I run a church and we are looking to do things differently when it comes to there being a 5th sunday in the month, but ical will not allow me to register this in a repeating custom event, it only lists weeks 1 to 4 can anyone suggest anything