Torch Reboot Cycle Problem after Blackberry ID Update

Hi!
I started my App World to download a few new applications. It went on to ask me to do an ID update, which i did. After installing the Blackberry ID, the phone asked me to restart it, which i did.
But now, it has gone into a reboot cycle and refuses to start. I tried starting the phone in Safe Mode, but when the screen becomes white (just before starting the phone) and i leave the 'Escape' button, BANG! Back into the reboot cycle. It doesnt even boot up in the safe mode. I tried like a zillion times to get it working in safe mode, but to no avail.
Any help please? I need to get the phone up and running as soon as possible! A fast response will make my day!
Model: Blackberry Torch 9800
OS: Version 6 (never updated, so original one which came with the phone)
Carrier: Idea (India)
Thank you,
regards,
Eeshan Umbrani

Hello,
If you can't get it to boot into Safe Mode (which can be tricky indeed), then perhaps this KB will be useful:
KB27956 How to recover a BlackBerry smartphone from any state
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Blackberry torch 9810 wont start after blackberry protect updated

got alert for blackberry protect update and installed up and went to reboot now . now my blackberry torch 9810 acts like it is restarting and will not come back on. need help asap!!!
Solved!
Go to Solution.

Are you able to restart your device in safe mode as shown in KB17877?
I assume, since it's caught in a reboot cycle, when you connect to the Desktop Software it doesn't take a stable connection to reinstall your software?
If that is case, remove your battery and keep it out when you connect to the Desktop Software. You will get a pop up that the device can't connect and there should be Retry, Update and Cancel buttons. Select Update and you will then be able to reinstall the current device software version.
When the load is progressing, you will see a step that says "Wait for device initialization". At this point, insert the battery and the reload should complete.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Network problem after new OSX update download

Greetings!
I've had a new (late 06) Intel 24" iMac networked wirelessly to my older iMac/cable modem/D-Link router very successfully since October. No problems and seamless set-up through the D-Link online wizard software.
Saturday I noticed an OSX upgrade to 10.4.8 (211mg) and went ahead and did the download on the wireless (Intel) iMac.
Upon restart, however, I have not been able to reconnect to my network. Airport is ON, but choosing my network name returns an error message. I have also attempted to reboot both cable modem and router, and reentered the D-Link wizard to both doublecheck the old network, and set up a new network, but saving these settings seems to fail by not recognizing the device, the router.
One of the error messages (on the wireless iMac) claims that my "settings have been changed by another application" (or to that effect) but does not give any clue as to how to determine what or where.
Also, since attempting to start from scrtch with the router, I no longer seem to get a full signal from the airport -- in Internet Connect, I no longer see a nice row of blue signal lights.
As you may be able to tell, I am new to networking, and the D-Link setup had helped make it simple -- tht is, I bumbled my way through it and was pleased with how well it worked. Now, after the OS update, not having the network is annoying -- and potentilly disastrous, as I need this machine online by Saturday.
Anyone able to give me a gentle hand, or nudge in the right direction?
Thanks in advance!
Bill
PS- Mac user since 1991! Wireless network user since only late October!

Hi again,
Sorry, BDAqua, I didn't see your note. I don't quite understand the last line of your suggestion -- a number greater than the number of CPUs? Not sure what you mean...
Phil, thanks for your note, too.
I believe the answer to your first question is 802.11g -- this is what it was set to.
After trying again to connect, using my old passwords, I was able to see the blue signal strength barss, and the Airport icon flashed on and off a few times, but ultimately the connection attempt failed again every time I tried it.
At this point, I'm no longer confident that my router is sending out a recognizable signal -- is this possible?
Also, in the dialog box in which available networks are usually shown (which has not happened since my original connection in October), today I was faced with a choice I hadn't seen before: 2WIRE736 -- is this likely to be someone else's network (a neighbor's)? I was wondering -- I'd never seen that one before. However, my own network names do not show up for choosing, and when I use Internet Connect to request them (and add WPA Personal and passwords), the connection appears to fail immediately.
At this point, should I attempt an OSX reinstall? Or has something I described made some sense for you?
Again, still very appreciative of all your help and patience with my ignorance.
Bill

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

Problems after installing Security Update 2008-02

I have a PPC G4 (1.65GHz/512 MB RAM), patched to 10.4.11. Before running the 2008-02 patch yesterday, I cloned my system to an external drive, ran Onyx (run all maintenance scripts/delete caches/repair permissions). I also uninstalled Miro 1.1 (intending to do a clean install of 1.2) and uninstalled Flash (intending a reinstall). I turned off ClamXAV/Clam Sentry. Updated using Software Update. Process seemed to go smoothly. After it completed, I shut the system down, waited a few minutes, then powered back up. System seemed fine.
Doubleclicking on the flash install dmg gave me the following error:
The following disk images failed to mount
Reason: No child processes.
I got the same message trying to install Miro.
Thinking the images were corrupted. I re-downloaded them on a PC, tranferring them via flash drive. Same error. Thinking perhaps the flash drive was corrupted, I tried again with a different flash drive. Same error.
I downloaded the standalone file, thinking to rerun it. Same error.
Logged in via safe mode. Same error.
Reran onyx. Shut down. Same error.
Trying logging in under a different admin profile. It did not recognize the password. I logged back in under my normal admin profile; reset the password on the backup admin profile. Still unable to log in. Back again and created a new backup admin profile. Tried running the Miro dmg under that; same error.
Can the security update be uninstalled? That or any other suggestions greatly appreciated.
TIA,
shn

Sorry for the delay in replying -- I had put the install disks in a safe place -- so safe that it took me a while to find them <g>.
Booted off the install disks and ran repair permissions (there were a few, most involving changes from read-only to execute). Verified the disk. Rebooted.
Problem not solved.
Shut down. Did a few chores <g>.
On restart, I got a message that the system had encountered a problem & I needed to shut down. Powered down. Waited a couple of minutes before powering up (successfully). Thinking that, given the permissions repair, I should rerun the the update manually, I tried rerunning the patch. Same error message.
Shut down & waited a couple of minutes before rebooting into safe mode in backup admin profile. tried rerunning the security patch manually. Same error message.
Further suggestions would be most gratefully accepted...
shn

Finder(?) problem after installing security update 2008-008

I hope someone can help with this problem:
After I installed Security update 2008-008 the finder(?) has begun to behave irratically.
Whenever the mousepad is clicked, the dock slides off to the left and the click is not registered by whichever application I am in. Mostly menus are affected. I now have to click the application and menu item several times before the click is registered.
Safari is particularly badly affected with the pointer jumping around the screen when trying to copy an url (dock keeps sliding to the left), page back/forward doesn't work - url links within web pages are not recognised. Furthermore, when using yahoo mail, menus like 'send' and 'save' are not recognised.
Any suggestions how to resolve this problem would be greatly appreciated!
Andrew

HI Andrew,
This is most likely caused by some 3rd part APP or kext that is now out of date.
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then test your problem there.
Now reboot in regular mode, if the problem didn't happen in Safe Mode, but does in Regular mode, See if there is anything relevant in...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Also look in in Your Accounts Pref Pane Login Items window.

Xfce shortcut problems after today's updates

Xfce shortcuts defined in keyboard settings doesn't work at all, even the default ones like alt+f2. They were still working in the morning, but they stopped after today's updates. I think it has something to do with kbd package, but I can't honestly say.
Anyone experiencing something similar?

Most probably you need to logof, go into the console and wipe anything related to xfce on your home folder and start xfce again. Its a pain to get everything as you want again but at least you avoid problems like the one you have now.
You may also see a problem with the icons, just pull tango-icon-theme and all will be well.

Airport Problems after "AirPort Extreme Update 2008-001" (1.0)?

I recently installed the update and have been unable to connect to my wireless network at home ever since. The airport detects my router and asks if I would like to join the network, but after I click yes, it says "there's an error in connecting", and thus no connection is made.
I can, however, get internet connection through ethernet from my router.
I can't be totally sure the update is the cause of the problem, but I haven't downloaded or installed anything else recently, and all other pc's wireless connections work fine with my router. I also haven't tried connecting through other wireless networks, so I'm not sure if the problem is exclusive to my router.
Has anyone else had similar problems after the update?
Also, does anyone know the default settings for the airport? I'm wondering maybe I have altered settings that's causing this problem.
Any help is greatly appreciated

I have the same problem but I have not found a fix.

Problem after iOS 6 Update.

I gotta problem after i updated my iPhone 4 to iOS 6. It's a factory unlocked iPhone, then when i change the sim to another network theres no service at all, changed to same network's sim ( the one i am using now, but this one's working fine ) but different number its still no service. But when i use the sim that i used to put in when i updated to iOS 6 its working. Really need someone's help. Its bothering me.
BTW Before even updating i tried all the sims and all are working hella fine.

Try a hard reset.....
Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

Has anyone experienced bluetooth problem after iPhone 4 update?

Has anyone experienced bluetooth connecting problems in car after iPhone update for 4.

Hi Barosz2,
If you are having Bluetooth connection issues after a recent update to your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Bluetooth problems after Lumia Black update

Just updated my 1020 with the Black update. Now i cant listen to music on my bluetooth headphones. The headset is connected ok (and constantly), the connection doesnt drop. But i only get about a second of music, then 2-5 seconds of silence, then another short burst etc.
Ive tried deleting the headset in bluetooth settings and re-pairing but that did not help. If i just listen through the phone speaker, then there are no dropouts. Headset is fully charged.
Anyone else having issues since the update? Been working fine for over a month before the update.

Ok, managed to fix this now, these are the steps i did though you might not need all of them
Did a soft reset (hold power and volume keys)
Tried going to xbox music, had no download options, couldnt play any music even locally as said i had no license.
Noticed the time and date was wrong after the reset so set that to be correct.
XBox music now works again
Bluetooth headphones now work again.
So perhaps the root cause of the problem was that after the black update, the DRM on the xbox music files was kicking in and once the licencing was working again, all was fine.
Anyway, phew.

Problems After Latest Security Update From March 10, 2015

Is anyone having problems after the latest security update from March 10th?
First my screen went from 16:9 to 4:3 and the resolution turned into a blocky 800 x 600. I managed to find a program
online to correct this problem called SwitchResX. It's unfortunately a pay program for 14 Euro. Here's the link
in case anyone needs it http://www.madrau.com/index.html
Now some alias icons in my dock have disappeared, but are kinda visible when I run my mouse over them, their
names pop up, but have no icons in the dock.
Sometime booting up is clumsy with a lot of hang time and I have to restart my Mac Mini manually by pressing
the button in the back to get a clean bootup to my desktop screen.
Could Apple do a fix real soon for this Security Update blunder?
Any help would be appreciated.

I too experienced problems with the keyboard and mouse on this G5, starting about a week ago when I installed the Java Release 6 and QuickTime 7.3.1 updates. The two symptoms I noticed most were slow, jerky scrolling through topic lists in MT-NewsWatcher (using the arrow keys) and difficulty with selecting text with the mouse in Safari (the selection being anchored several characters away from where I’d begin a click-&-drag).
The latest patch, Security Update 2007-009 (PowerPC) v1.1, seems to have solved the problems for me.

Problem after anti-virus update

Hello everybody.
One of our client uses Oracle XE on a Windows server. Two days ago after an automatic update for the installed anti-virus, Oracle stoped to work. The Listener does't come up any longer. I'm waiting for the listener.log file from the client. In the meanwhile, any idea about this issue? Thank you. Filippo

They said me that the anti-virus is Symantec and doesn't have any firewall service. Even with it down, the problem is still alive.
The part of listener.log when the problem started was:
16-NOV-2006 05:13:54 * service_update * xe * 0
16-NOV-2006 05:15:00 * service_update * xe * 0
16-NOV-2006 05:15:33 * service_update * xe * 0
16-NOV-2006 05:19:24 * service_update * xe * 0
16-NOV-2006 05:27:39 * service_update * xe * 0
16-NOV-2006 05:32:03 * service_update * xe * 0
16-NOV-2006 05:36:27 * service_update * xe * 0
16-NOV-2006 05:46:27 * service_update * xe * 0
16-NOV-2006 05:56:30 * service_update * xe * 0
16-NOV-2006 06:06:33 * service_update * xe * 0
16-NOV-2006 06:16:36 * service_update * xe * 0
16-NOV-2006 06:26:39 * service_update * xe * 0
16-NOV-2006 06:36:42 * service_update * xe * 0
16-NOV-2006 06:56:48 * service_update * xe * 0
16-NOV-2006 07:16:54 * service_update * xe * 0
16-NOV-2006 08:27:15 * service_update * xe * 0
16-NOV-2006 08:47:21 * service_update * xe * 0
16-NOV-2006 09:07:27 * service_update * xe * 0
16-NOV-2006 09:17:30 * service_update * xe * 0
16-NOV-2006 09:22:58 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1090)) * establish * xe * 0
16-NOV-2006 09:23:03 * service_update * xe * 0
16-NOV-2006 09:23:34 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1096)) * establish * xe * 0
16-NOV-2006 09:23:36 * service_update * xe * 0
16-NOV-2006 09:28:42 * service_update * xe * 0
16-NOV-2006 09:29:06 * service_update * xe * 0
16-NOV-2006 09:29:13 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1108)) * establish * xe * 0
16-NOV-2006 09:29:39 * service_update * xe * 0
16-NOV-2006 09:31:40 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1119)) * establish * xe * 0
16-NOV-2006 09:31:42 * service_update * xe * 0
16-NOV-2006 09:31:51 * service_update * xe * 0
16-NOV-2006 09:32:24 * service_update * xe * 0
Non pi in ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srvml2.miniliner.locale)(PORT=8080))(Presentation=HTTP)(Session=RAW))
16-NOV-2006 09:38:07 * service_died * xe * 12547
TNS-12547: TNS: contatto perso
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-NOV-2006 09:42:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Il file dei parametri di sistema �C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Messaggi di log registrati in C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Informazioni di trace registrate in C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Il livello di trace attuale �0
Avviato con PID=1484
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srvml2.miniliner.locale)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
16-NOV-2006 09:43:45 * service_register * xe * 0
16-NOV-2006 09:44:00 * service_update * xe * 0
16-NOV-2006 09:44:06 * service_update * xe * 0
16-NOV-2006 09:44:27 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1146)) * establish * xe * 0
16-NOV-2006 09:44:27 * service_update * xe * 0
16-NOV-2006 09:52:02 * service_register * CLRExtProc * 0
16-NOV-2006 09:52:02 * service_register * CLRExtProc * 0
16-NOV-2006 09:53:50 * service_update * CLRExtProc * 0
16-NOV-2006 09:55:40 * service_update * CLRExtProc * 0
16-NOV-2006 09:57:29 * service_update * CLRExtProc * 0
16-NOV-2006 09:59:19 * service_update * CLRExtProc * 0
16-NOV-2006 10:01:08 * service_update * CLRExtProc * 0
16-NOV-2006 10:02:57 * service_update * CLRExtProc * 0
16-NOV-2006 10:04:47 * service_update * CLRExtProc * 0
16-NOV-2006 10:06:36 * service_update * CLRExtProc * 0
16-NOV-2006 10:08:25 * service_update * CLRExtProc * 0
16-NOV-2006 10:10:15 * service_update * CLRExtProc * 0
16-NOV-2006 10:12:04 * service_update * CLRExtProc * 0
16-NOV-2006 10:13:54 * service_update * CLRExtProc * 0
16-NOV-2006 10:15:43 * service_update * CLRExtProc * 0
16-NOV-2006 10:17:32 * service_update * CLRExtProc * 0
16-NOV-2006 10:19:22 * service_update * CLRExtProc * 0
16-NOV-2006 10:21:11 * service_update * CLRExtProc * 0
16-NOV-2006 10:23:00 * service_update * CLRExtProc * 0
16-NOV-2006 10:24:50 * service_update * CLRExtProc * 0
16-NOV-2006 10:26:39 * service_update * CLRExtProc * 0
16-NOV-2006 10:28:29 * service_update * CLRExtProc * 0
16-NOV-2006 10:30:18 * service_update * CLRExtProc * 0
16-NOV-2006 10:32:07 * service_update * CLRExtProc * 0
16-NOV-2006 10:33:57 * service_update * CLRExtProc * 0
16-NOV-2006 10:35:46 * service_update * CLRExtProc * 0
16-NOV-2006 10:37:35 * service_update * CLRExtProc * 0
16-NOV-2006 10:39:25 * service_update * CLRExtProc * 0
16-NOV-2006 10:41:14 * service_update * CLRExtProc * 0
16-NOV-2006 10:43:04 * service_update * CLRExtProc * 0
16-NOV-2006 10:44:53 * service_update * CLRExtProc * 0
16-NOV-2006 10:46:42 * service_update * CLRExtProc * 0
16-NOV-2006 10:48:32 * service_update * CLRExtProc * 0
16-NOV-2006 10:50:21 * service_update * CLRExtProc * 0
16-NOV-2006 10:52:10 * service_update * CLRExtProc * 0
16-NOV-2006 10:54:00 * service_update * CLRExtProc * 0
16-NOV-2006 10:55:49 * service_update * CLRExtProc * 0
16-NOV-2006 10:57:39 * service_update * CLRExtProc * 0
16-NOV-2006 10:59:28 * service_update * CLRExtProc * 0
16-NOV-2006 11:01:17 * service_update * CLRExtProc * 0
16-NOV-2006 11:03:07 * service_update * CLRExtProc * 0
16-NOV-2006 11:04:56 * service_update * CLRExtProc * 0
16-NOV-2006 11:06:45 * service_update * CLRExtProc * 0
16-NOV-2006 11:08:35 * service_update * CLRExtProc * 0
16-NOV-2006 11:10:24 * service_update * CLRExtProc * 0
16-NOV-2006 11:12:14 * service_update * CLRExtProc * 0
16-NOV-2006 11:14:03 * service_update * CLRExtProc * 0
16-NOV-2006 11:15:52 * service_update * CLRExtProc * 0
16-NOV-2006 11:16:45 * service_update * xe * 0
16-NOV-2006 11:16:45 * service_update * xe * 0
16-NOV-2006 11:16:47 * service_died * xe * 12547
TNS-12547: TNS: contatto perso
16-NOV-2006 11:16:58 * service_register * xe * 0
16-NOV-2006 11:16:58 * service_update * xe * 0
16-NOV-2006 11:17:04 * service_update * xe * 0
16-NOV-2006 11:17:10 * service_update * xe * 0
16-NOV-2006 11:17:42 * service_update * CLRExtProc * 0
16-NOV-2006 11:19:31 * service_update * CLRExtProc * 0
16-NOV-2006 11:21:20 * service_update * CLRExtProc * 0
16-NOV-2006 11:23:10 * service_update * CLRExtProc * 0
16-NOV-2006 11:24:59 * service_update * CLRExtProc * 0
And 1tnslistener.log is:
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-NOV-2006 20:09:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Il file dei parametri di sistema C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Messaggi di log registrati in C:\oraclexe\app\oracle\product\10.2.0\server\network\log\1tnslistener.log
Informazioni di trace registrate in C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\1tnslistener.trc
Il livello di trace attuale 0
Avviato con PID=3136
TNS-01151: Manca il nome del listener, 1TNSListener, in LISTENER.ORA
Thanks a lot
Filippo

BUG: text rendering problems after keyboard firmware update

Hey all!
Just letting you know that today, after installing the keyboard/mouse firmware update 1.0, the font rendering in many applications become weird, letters may overlap, see some screenshots:
http://artemio.net/tmp/apple/bug1.png
http://artemio.net/tmp/apple/bug2.png
My system is iMac Intel Core Duo 17", 2 GB RAM, 250 GB HDD, Mac OS 10.4.6.

Just to clarify, that was a software update, not a firmware update. I don't think the keyboard has any resident firmware.
Since this is a new update from Apple, and there have been very few posts about problems after it was installed, (I have seen a couple here) I think that you should call and speak directly with an Apple Customer Service rep. That way Apple knows some have issues with the update and they may have suggestions.
Let us know what they say.

Torch Reboot Cycle Problem after Blackberry ID Update

Similar Messages

Maybe you are looking for