TortoiseSVN committed files that weren't changed and corrupted them

Hi all,
A colleague used my working copy to perform some changes. He then committed everything. Even though he did not change the classes in a subfolder, TSVN committed them as well. All the classes are now corrupt - the Class VIs do not recognize the class (attached). This is for every class in the project.
To make sure nothing was in fact changed I used lvdiff and the TSVN log, and no differences are shown and both versions show a broken arrow (even though the previous version worked fine).
If I try to go back to the previous revision in the working copy, it doesn't work (still a broken arrow). Only if I take a completely new folder and checkout the older revision do I get my classes back. However, the updates my colleaugue did are important.
Does anyone have any idea what could cause this, what I can do about it and how I can prevent this happening again?
Thanks,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett
Attachments:
corrupt classes TSVN.JPG ‏76 KB

Bergers wrote:
I restored my new Mac with the "Latest Backup" of Time Machine. I now understand that I will have to erase the whole backup harddrive in order to continue using Time Machine (I cannot get it to do incremental backups with my new computer from where I left off on the old one).
You may be able to get the new Mac to "inherit" the old one's backups manually. See #B6 in Time Machine - Troubleshooting.
But the practice of deleting originals, assuming Time Machine will keep the backups indefinitely, is a major mistake. See Time Machine - Frequently Asked Question #20.
Linc is correct about multiple backups -- it's always prudent. See #27 in the FAQ link for some suggestions.

Similar Messages

How do I convert an e-mail into a Word file that can be edited and printed?

I received an e-mail from a relative that I want to convert into a Word file that can be edited and printed?

Go to appleid.apple.com to manage the ID, sign in. If you are using two-step verification on the ID, select the Name, ID and Email Addresses section, then change the birth date on the bottom right. If you are using security questions instead of two-step verification, select the Password and Security Question and answer the two security question to access and change the birth date. At the present time you may not be able to enter the correct birth date, but you should be able to change it to 1/1/2001, which will have child ID status.

Changing a number in an excel file that has been changed to a PDF

Changing a number in an excel file that has been changed to a PD ?

Hi llkwx,
I would like to confirm ,do you want to change the page number of the PDF or any other number in the data given in that PDF?
For changing the page number display
You can select Page Thumbnail option from the left hand side .In that panel ,right click and select the option "Number Pages" from the drop down menu.You can further change the page numbers as per your requirement.
Adding page numbers to PDF
Tools>Pages>Edit Page Design>Header and Footer>Add Header and Footer>click Insert Page Number
Do write us back with your response .We will be glad to help you out with your queries.
Regards
Sukrit Dhingra

Changing a number in an excel file that has been changed to a PD ?

Changing a number in an excel file that has been changed to a PD ?

Hi llkwx,
If I understand correctly, you've converted an Excel file to PDF, but now need to edit the PDF file? If so, you'll need either update the Excel file and re-create the PDF, or use Acrobat to edit the text in the PDF. If you don't have Acrobat, you're welcome to try ti for free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.
Best,
Sara

HT203433 How do I retrieve an app that I bought. The icon is in my library. But the program isn't in my device. When I look in the file that contain the app and try to open it, It doesn't open.

How do I retrieve an app that I bought. The icon is in my library. But the program isn't in my device. When I look in the file that contains the app and try to open it, it doesn't open.

Howdy Hestersfree,
This can be done through the App Store on the device that you'd like the app installed on.
Apps on iOS
Open the App Store on your device.
Make sure you are signed in with the same Apple ID used for the original purchase.
Tap Updates from the bottom navigation bar.
Tap Purchased on the resulting screen.
Locate the app in your Purchased tab.
Tap the download button.
The app will begin downloading and you'll be taken back to your home screen.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Cheers,
Allen

Is there a way to import images that have been edited and assign them to the original?

I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
-- Stick the originals in one Project(s) and the edited versions in another Project(s).
-- Stick them all in the same Project(s) and "Stack" them.
But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
So, what is most valuable to you?
-- The original, out of camera files? (That is, the fear/need to revert.)
-- The edited versions? (That is the hours of work that it took you to get there.)
If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
Of course, you can do a bit of both.
Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
Good luck!

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Where is the file that conains the changements of ifsMgr

Hi, everyone, thank you advance for your time and helps.
Now I am using 9ifs to add some features to webdav. I made my own webdavserver which is similar to the original DavServer. When I loaded my own webdavServer, and found that it was truly running by Oracle Enterprise Manager, but the page of http://localhost:7777/ifs/files1 cannot be found (Http 404 error) when type the above address in my browser.(IFS.SERVER.PROTOCOL.DAV.ContextServletPath == /ifs/files1). Can you tell why?
I also want to know how does the ifsMgr work? Where can I find and in which file can I find the change s after I make some changing of some server and their parameters by the ifsMgr.
Any advices and suggestions are highly appreciated.
Johnson Song

All the changes that are made usng IfsMgr are stored in the database, in the iFS schema. There are no local files that store the configuration data.

Can you restore only the files that have recently changed with Time Machine?

Greetings,
Before i ask my question, i'll give a bit of background as to my issue.
I was editing my $PATH within the ~/.bash_profile file and accidently overwrote my $PATH. So now simple terminal commands such as open or 'ls' no longer work. In order to edit the file, I need to change the defaults to allow me to see hidden files, but I can't do that because the defaults command stopped working after I screwed up the $PATH. Also, I used the echo commadn to verify that the previous $PATH no longer exists. The environment variable now just points to an empty folder I accidently set it to in TextEdit.
So, I have Time Machine running, and it backs up to a Time Capsule. I have the hourly backups that I can restore to, but when I start the restore, it crawled up towards 200,000 files before I finally decided that wasn't right and decided to post a question (it's still "preparing to copy"). I had to select the OS X Volume to restore from my one hour old backup, since I can't restore the folder the bash_profile exists within (it is hidden) or so I assumed.\
Now my question, it seems that Time Machine is doing a full restore of every file in the backup and not just the files it incrementally changed between its hourly backups. Why does it do this? My restore process should have just been a couple of minutes, restoring a couple hundred or so files at most. Restoring several hundred thousand files seems stupid when the I select a backup that is one hour old. Is there anyway to set it up so I can restore incrementally?
Thanks,
Johnathon.
Message was edited by: Scionwest
A quick note, I performed the restore from within the Time Machine while booted into OS X; the restore did not take place in the special bootup tool available. Why it does not provide an option to simply restore the files changed over the last hour is mind boggling to me

You are making this way too complicated. In Terminal, choose Shell > New Command…. In the text box that opens, enter bash --noprofile . A Terminal window will open that does not use your .bash_profile, so the bad $PATH will not be an issue. Now you can remove, move, or edit .bash_profile.

Where are the 270 GB of files that Finder, Disk Diag, and Disk Expert can't find?

Late 2008 MBP 2.8 C2D running Mavericks and 750 GB replacement WD HD. This is what I see when checking storage. Finder and disk utlitities don't see anything that big, only the files that correspond with the typed files below (Audio, Movies, etc.).
Under Mountain Lion the picture below was the same looking except the size of the yellow "Other" bar was 0.0 GB.
Given the size of the files, I think they may be from when I was saving EyeTV content on my HD. I moved everything to an external drive and manually searching for EyeTV files finds nothing.
I'm planning on migrating to 240 GD SSD soon and don't want to run into space problems.
Thanks in advance!

Can't seem to post screenshot so no attachment.

I have a need to open files that have a mq4 and tpl extension. Do you have a program to open these?

Do you have an add-on or a way to open files that have a MQ4 or TPL extension?

white_cliff wrote:
CL90,
I thought the return policy was 14 days.
It is ... it changed from 30 days to 14 days in early 2011.

How to create a par file that includes an image and a .swf file

Hi everyone,
I have a requirement to create a <b>.par file which will contain a .swf file and a .gif file</b>.
Can anyone please tell me the steps to do so.
Thanks in advance

Thanks Ranjeet for the quick reply.
I have created a portal project and placed the .swf file and the .gif file in the images folder and deployed it to the server. I downloaded the .par file and chked that it contained the .swf and .gif files. But when i run the application it <b>does not show me the .swf file</b> . An icon with a cross mark appears instead. I have flash player installed on my PC .The .gif file when run works fine but not the .swf file.
Can anyone tell me a workaround for this ?

Recieving A.I. files that have everything grouped and masked. What could cause this?

I recieve A.I. files from other art departments and some that I open will have every object grouped and masked.
I'm not able to select one thing until I select the outside box with the white selector and delete the masks.
I'm using CS4 Illustrator. Why would everything be grouped and masked several times over.
I appreciate any answers. Thanks

Why would everything be grouped and masked several times over.
- they were created in another program
- they were created in another version of AI
- they started out as PDFs
Mylenium

Before installation of "flasplayer 13x32" recieved Security message re" it being an executable file that may contain viruses and codes that can corrupt my computer".

Downloaded "flashplayer 13x32". A security message appeared from Microsoft "This is an executable file and may contain viruses or codes that will harm your computer". Question: If its corrupted, why did Adobe Website download it.??

"This is an executable file and may contain viruses or codes that will harm your computer".
The keyword is "MAY"...
NOWHERE in that does it say "This is a virus."
What you're seeing is a standard Windows warning about ANY executable file you can download.
Adobe isn't, and never has been, in the business of making malware. That said, there are literally millions of fake downloads of things like Reader, Shockwave and Flash Player.
Bottom line: If you don't trust the download... DON'T USE the download.
There are two sources to trust for Adobe freeware:
For Flash Player - Adobe Flash Player Distribution | Adobe
For Reader - Adobe - Adobe Reader Distribution
You can bookmark those links and use them ANY time you get an update notification, to know you're getting the download directly from the source.

TortoiseSVN committed files that weren't changed and corrupted them

Similar Messages

Maybe you are looking for