TOS and Server question(s)..

#1 Is it true that Verion has a don't ask don't tell policy when it comes to hosting a web server?
#2 As long as it's a game server, a personal server, family and friends sort of operation, patched, not up to anything illegal, it won't be actively pursued?
As also address(ed) on at least thes two threads:
#1 http://www.dslreports.com/forum/r18029956-Will-this-violate-Verizon-TOS]
#2 http://www.dslreports.com/forum/remark,12835743
I am not interested in hosting any kind of "server", I am just wondering.
Thank for your time and understanding.
Message Edited by dslr595148 on 10-10-2008 04:24 PM
Message Edited by dslr595148 on 10-10-2008 04:25 PM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Shane P wrote:
Wes,
I have found that DNxHD is a nice option. I used the 720p 145 preset and it was about a 1min=1GB...is this normal?
I brought it into PPCC and I was able to shuttle the video beautifully without the stuttering of the navite camera AVCHD.
I would however like to keep the original frame size of 1080, I was looking through all of the DNxHD presets and there are no 1080p/59.94 presets. I tried to make a custom preset however all of the adjust parameters for the DNxHD presets are ghosted out. Are they not customizable?
I apologize if these sound like "newb" questions as I have nevered used DNxHD prior to today.
Create a new preset and choose "DNxHD MXF OP1a" from the Format popup
Then from the Resolution popup in the Video Codec section you can choose from one of the 59.94p presets. It will set the frame rate to 59.94.
If you have deeper questions about AME I recommend you ask on the AME forum. :-)

Similar Messages

Performance and Server questions

Can anyone tell me how the Performance of Dev 6 really is over
the internet? We would really like to have our application run
over the web. Also what would be recommended OAS server
requirements - memory etc to have acceptable speed. Has anyone
had any problems with this? Has anyone successfully deployed
their application with the 3 teir architecture? Are there any
white papers that address this that I can look at?
Thanks.
null

Can anyone tell me how the Performance of Dev 6 really is over
the internet? We would really like to have our application run
over the web. Also what would be recommended OAS server
requirements - memory etc to have acceptable speed. Has anyone
had any problems with this? Has anyone successfully deployed
their application with the 3 teir architecture? Are there any
white papers that address this that I can look at?
Thanks.
null

Adding OSX server to AD--binding questions and server type

Currently my Macs are simply bound to AD, but I am going to add ML server to the mix so I can simplify management. After all my reading I am still unsure what to do with my current clients. I know the server is bound to both AD and OD, but does each client need to be bound to both?
Regarding the server type is, should my OD be a master, replica, or relay?

Yes, you have to bind the client and server to both OpenDirectory and ActiveDirectory. The configuration is commonly called "Magic Triangle". You'll find lots of examples online under that moniker.

Possible to segment traffic between 2 interfaces? And other questions...

I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
Thanks.

I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
You have some type of hardware firewall/security appliance.
You have some type of wireless access point.
You don't seem to have any type of router or switch in your configuration.
You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
So my questions are:
Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
Anyway, a little more info would be helpful.
Oh and if I have this totally worng in what I think your doing.. My mistake.
Tom N.

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

SBO Ebook: Certification and Interview Questions and Answers

Hi, please permit me to use this forum to introduce you to this ebook titled: [SAP BUSINESS ONE SOLUTION CONSULTANT CERTIFICATION REVIEW AND INTERVIEW: QUESTIONS, ANSWERS AND EXPLANATIONS|http://www.ebookmall.com/ebook/277772-ebook.htm]
This book consists of real life and scenario based review questions and answers on SAP Business One solution certification examinations with Booking Codes/Certification ID: C_TB1200_04, C_TB1200_05 and C_TB1200_07. It covers the SAP Business One Solution Consultant curriculum namely:
 TB 1000 - SAP Business One Logistics
 TB 1100 - SAP Business One Accounting
 TB 1200 - SAP Business One Implementation and Support
The book is targeted at:
 SAP Business One Consultants preparing for the Solution certification exams (C_TB1200_04, C_TB1200_05 and C_TB1200_07)
 SAP Business One Solution Consultant Job Seekers
 SAP Business One Solution Consultant recruiters
 SAP Business One Implementation team
 SAP Business One Project Managers
In this book, you will find:
 SAP Business One Solution Consultant Certification Areas of Concentration (AoC)
 SAP Business One Solution Consultant Certification Curriculum
 Things you must know about the SAP Business One Solution Consultant Certification Examination.
 SAP Business One Certification review questions and detailed answers
 SAP Business One Interview questions and detailed answers
It can be downloaded at http://www.ebookmall.com/ebook/277772-ebook.htm.

Hi Dan,
Thanks for your observation, comment and review.
1. As a matter of fact, since many features of SAP B1 has not changed, just as you asserted, I took cognizance of new enhancements to the solution over the various releases, especially as it relates to the functionalities. By extension however, most questions for prior releases applies to the successor release.
Furthermore, there was a mix-up in the download. Ideally, you should have three sections in the book. Section I (release 2004, by extension - 2005 and 2007 releases); Section II (release 2005, by extension - 2007 release) and Section III (release 2007). The document has been reviewed. Hence, everyone that bought the book before 29th of April 2008 should visit my [blog|http://blogs.ittoolbox.com/sap/kehinde/archives/sap-business-one-solution-consultant-ebook-review-notice-24053] on how to get a copy of the revised version within 24 hours at no extra cost. I regret any inconveniences. PLEASE DO NOT LEAVE YOUR EMAIL ADDRESS ON THIS FORUM.
2. On localization, SAP Business One has more than 10,000 installations across the world. The book is not intended to be "localization specific". It is intended to serve as a certification review for functionalities that cuts across board with a mix of localized functionalities. I am sure you found in there a number of localization questions for other countries like UK. My advice for individuals using the book is to identify which questions apply to their localization.
While I await your review of the [revised version|http://www.ebookmall.com/ebook/277772-ebook.htm] as an SAP Business One advisor, I believe you will agree with me that it is an invaluable resource for preparing for the certification exam and also technical interview sessions.
Thanks

Flash Security Settings and Random Questions not Displaying

Hey folks,
I created a Captivate 4 project with 3 slides and a question pool of about 70 questions in which I am randomly pulling in. I am using IE7 and Flash 10. Publishing in Flash 10. If I publish or view in Preview in a web browser the project launches, plays the first 3 slides, and then goes blank when the first question should appear. Note: previewing the project AND publishing the project as an .exe does launch and display all the questions correctly. It ends up being a flash security issue. I went to the adobe site and via the Adobe Flash Player Security Manager" I entered in the main .SWF captivate-generated file as a trusted file and then re-ran the published captivate project and it ran correctly. Question is ... what do I need to do to set up flash or my project so I don't have to do this for every new project that I deploy? I don't want to have the users have to go in and add whatever I deploy as a trusted file. It's also a little confusing as to why the first three slides played and it stopped at the questions ... seems like if it's not a trusted file, that it wouldn't run at all.
Thanks for any help!
Chris

Hello again
I think I'd be investigating a temporary web server to host on until things are ready. Here's where it will help.
By providing files to the end users, if you are copying files over you end up having to explain how to save the files. You then have to walk them through setting the Flash Security so they can properly view. It all just becomes a pain in the kazoo.
If you can find some server space, you simply upload the content and provide a link for the users to view the content.
Other than that, if you are insistent that copying is the way to fly, I might suggest you establish a known location where you want everyone to copy their files. Perhaps C:\TestFolder. Then provide some instruction on how to configure the folder with the relaxed Flash Security. From there forward, anything they copy to the folder should need no security adjustment.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Open Directory and LDAP questions/difficulties

Hi, my company is about to try out OSX Server to replace our old Irix file server. In order to do this we need to run through a number of tests in order to validate the idea. Basically, the test setup is a PM G5 running OSX Server 10.4 and a connected Mac and/or PC on the G5's second ethernet port as test clients. The first ethernet port is connected to the local subnet (192.168.1.x) and, ideally, the OSX Server should have its own subnet on the second port and serve DHCP, AFP and SMB to that port only, along with an OD shared directory providing both authentication and home directories for users. (later on, if all is successful, it will serve those services on the company subnet). DNS is supplied by a separate server on the subnet (DNS caching server running tinydns)
I've read my way through the OSX Server documentation, and gathered all the information the Worksheet requires. The problems started occuring because we installed OSX Server over an OSX Client and broke off the Server Assistent, because we were worried at the time that turning on a Windows PDC would collide with our current (and very flaky) Samba server running on the Irix machine, and that DHCP might also collide with our current dhcp server.
As a consequence, we tried to set it up via the Server Admin Panel, Network Prefs, and the Workgroup Manager, after having connected the second ethernet port of the G5.
Doing this, and setting the OD service to an OD Master, along with a Search base of dc=hostname, dc=domain, dc=tld has not exactly changed much. The problem is that the info panel says that LDAP is not running. This confuses me no end. I thought OD was based upon LDAP. The server name in the Server Admin panel is hostname.local. And now I get to my real questions (finally):
1.Would it be better to just wipe the machine and start again using the Assistent, and set up the ODMaster that way?
2.When is an ODMaster not a local directory and when is it a shared directory (the hostname.local worries me)
3.What services exactly need to be running for the ODMaster to function properly
3.How do I configure the local subnet on the second port (should I use the Gateway Assistent or do it by hand), and how do I only serve those services to that port (do I do it by setting the router/gateway for those services as the IP of the second port or as localhost).
4.Do I need to simply enable LDAPv3 on the clients and set the search path to automatic to get the clients to Autheticate?
5.Do user and groups added to the hostname.local become part of the OD Domain?
I'm sorry if I come across as a total newbie. I'm used to doing most of this on the commandline in Linux (except for LDAP, which is new to me), and the GUI. I have managed to entangle myself quite nicely in all this and could really use some pointers.
Thanks in advance
Theo.
PowerBook G4 Mac OS X (10.4.7)

1. Starting with a freshly installed OS X Server is recommended, but start no services at first, you need working DNS with reverse zone for the server IP to run OD Master (and other services). If the server domain is to be different from the existing network domain name setup DNS in OS X for the test domain.
2. I'm not sure I understand the question. LDAP/OD can be used on the server to "house" the user accounts but you don't have to bind computers to it.
If you don't use the more advanced possibilities with LDAP/OD I don't think the clients even need to have LDAP configured to be able to authenticate.
hostname.local = hostname and the standard Bonjour domainname .local ?
3a. DNS, so that reverse lookup works for the hostname before setting up OD Master. OD needs a "true" domainname Bonjour isn't sufficient. Setup/use something like mydomain.private.
3b. You don't need to do NAT, you can also route between two subnets (you would need a static route in your Internet router too).
If you want NAT you can use the GW assistant. The interface on the top of the list in Network config (where you can add more/alias interfaces) is the "main" interface used as the "WAN"/"Internet" interface.
4. If the clients are "standalone" (not bound to the OD domain or not using server based homefolders and such) I think you only need LDAP if you want the clients to be able to search for info in OD/LDAP. Not needed for authentication.
You can send out LDAP info with DHCP.
5. If you mean you add/enter users and groups to OD/LDAP directory it just means you can have different servers/clients using a central repository(?) for authentication purposes.
If you add (bind) machines to the domain you can to control what clients can do locally (priviledges), which applications they can run and so forth.
In /etc/smb.conf you can say which interface to use för samba (don't remember what to enter though). And if using the firewall (you must if you want NAT) you can stop Bonjour (mDNS - multicasts) from entering the "old" network if you like/need.

How to create client and server app using node.js in firefox os.

I want to create a client and server app using node.js for firefox os. Please suggest me how to create a apps.
I want to send a request from client to server and based on client request, service reply to client.
If any links available, Please share it.
Thanks

Hi sb00349044,
The SUMO forums focuses on end-user support.
For questions about developing for Firefox OS, you will find better guidance in MDN, StackOverflow, and mailing lists:
* [https://developer.mozilla.org/en-US/Firefox_OS MDN - Firefox OS]
* [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow - Firefox OS]
* [https://lists.mozilla.org/listinfo Mailing Lists at Mozilla]
Thanks,
- Ralph

RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2

Greetings,
RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2 I tried to reinstall but none of the tabs function . Thank you for your assistance

'''roboform_firefox:'''
The original poster (OP) reported his/her OS as Windows 7 in the body of the question, therefore, your solution would be of no use to the OP. You can also see the OS for the system used by the OP to post the question to the right of the original question in this forum .
Additionally, using an old version of Firefox is ill-advised as old versions contain uncorrected security vulnerabilities. Roboform has been very good lately in keeping their products updated for new Firefox releases and any problems with their products should be reported to them so that they can address any issues and release an update if needed.

Enterprise Hotfix Rollup for Win7 and Server 2008 R2 via WSUS

I stumbled across the fact that Microsoft released a hotfix rollup for Win7 and Server 2008 R2 that contains 90 hotfixes
http://support.microsoft.com/kb/2775511/en-us
The articled I linked above talks about after installing 2775511 (the big hotfix rollup containing 90 hotfixes) it is also necessary to install three more hotfixes:
After this update is installed, you must install update 2732673 to fix a regression issue in the Rdbss.sys file
After this update is installed, you must install update 2728738 to fix a regression issue in the Profsvc.dll file
After this update is installed, you must install update 2878378 re-released on November 11, 2013 to fix a regression issue in the Advapi32.dll file
I have imported all four of these hotfixes into my WSUS server. Do I need to install 277551 first and then install the other three or can all four be approved and go out at once? I guess I am hung up on the language of "After this update is installed
.... ". I want to put all 4 of these on our Win7 machines as well as my 40+ WinServer 2008 R2 machines

I read somewhere that over half of the updates included in Win7 SP1 and WinServer 2008 R2 SP1 were originally released as hotfixes. This means Microsoft made the decision that a large number of hotfixes would benefit every user of these two OSs
I think your conclusion is flawed. The only thing that you can draw from the presented statistic, is that Microsoft determined that a significant percentage of updates originally released as hotfixes warranted the additional investment in regression testing
to subsequently release those hotfixes as updates.
The fact that they bundled these 90 hotfixes together leads me to the same conclusion.
In fact, exactly the opposite conclusion applies: What you have in this package is all the rest of the stuff that didn't make that cut. What you have in this package are still NOT-regression tested hotfixes, they've just been bundled up for easy deployment
(and note that three of them got further broken in the process of bundling), causing yet three more hotfixes to have to be released.
In fact I read the MS Team Blog about this big hotfix release and they say the same thing, all users of these OSs would benefit from the installation of this hotfix rollup, not just a subset of users.
I suspect there are a notable number of patch administrators and systems administrators who would disagree with that self-serving promotion. If, in fact, it's true that "all users" would benefit, then the product team should have invested the effort in properly
regression testing those hotfixes, and releasing them as REAL updates. They did not; ergo the *actual* value is less than claimed.
Of course the bugaboo here is the fact that three other individual hotfixes need to be installed after the big hotfix rollup is installed.
Exactly! (And those are just the attempted fixes that broke something. Who knows how many other "fixes" may still result in newly discovered "broken stuff" that was never broken in the first place.)
The second part of this question should revolve around an itemized review of the hotfixes contained in this rollup with one simple question asked for each:
Have we actually *experienced* the issue addressed by this hotfix.
Where hotfixes are concerned one very simple but important rule applies:
If it ain't broken, don't try to fix it!
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Re: (forte-users) Forte and CORBA question

Hi,
The discarding the Java variable that references a distributed Forte object
doesn't cause that the distributed object will be reclaimed. In Forte client
you can use ReleaseDistReference() of the current partition (task.part) to
free the remote object. For Java client, you can implement the following
solution:
- define a method ReleaseMyObject() in the SO you are using to get the proxy
to the dist. object. As parameter for it use something that can identify
your object (attribute).
- your SO has an array or hashtable with your distributed objects, every new
object is added to it.
- in the implementation of ReleaseMyObject() find the object to release in
the array and call ReleaseDistReference() for it,
- from the Java client, call the ReleaseMyObject() for the object that is
not more needed.
Regards,
Zenon Adamek
----- Original Message -----
From: Joseph Mirwald <jomirweb.de>
To: Dave Ortman <dortmanyahoo.com>; 'Forte User Forum'
<forte-userslists.xpedior.com>
Sent: Wednesday, March 07, 2001 3:58 PM
Subject: Re: (forte-users) Forte and CORBA question
Hello Dave,
do you use a copy return or copy parameters in this method ?
If not, then maybe Forte is unable to garbage-collect this object because
it is forever
a proxy which only the server-partition may be able to drop it from memory
(object=NIL).
Try this and let us know what happens.
Hope this helps
Joseph Mirwald
At 11:49 07.03.01 -0800, Dave Ortman wrote:
We're attempting to use a Java client to access a
Forte server. In doing such, we've experienced a
problem which I hoped somebody could shed some light
on.
We've had a Java client calling Forte service objects
and passing Forte objects back and forth as CORBA
structs with no problem. However, we have experienced
some problem obtaining and using remote references to
distributed objects from the Java client.
The problem is memory utilization. Each time I obtain
a reference to a new object, the memory utilization on
the Forte server jumps up quite a bit (around 100k per
object on an NT box). Eventually, if I fetch enough
objects, the server will crash due to lack of memory.
It seems that Forte never reclaims the memory, even
though I'm not using (and don't have a handle to) this
remote objects.
The objects are very small. In fact, I created a test
Forte SO with one method, getObject(); which returns a
distributed object with a single attribute. I then
have a Java client access the getObject() method
repeatedly - discarding the reference to the object
after each iteration. After a short while, the box
will come down.
Any thoughts?
Thanks in advance,
-Dave Ortman
--- "Epari, Madhusudhan" <meparioxhp.com> wrote:
Hi All,
Following error occurs consistently on a router
partition for every call to
the service object but the partition doesn't die or
crash. I tried bumping
up the partition memory too. Any thoughts on why
it's happening?
Thanks in advance,
Madhu
SYSTEM ERROR: Failed to connect or lost connection
to the
environment manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the
environment
manager is
installed at that location. If it is, then check
to be sure that
there are
enough system resources available to support this
partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed Feb 21 09:30:56
Exception occurred (locally) on partition
"CSA_cl0_Part2-router",
(partitionId =
C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c:0x1,
taskId =
[C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c.8]) in
application
"MWRouting_cl1", pid 18937 on node forted1 in
environment
frtedev.
SYSTEM ERROR: Attempt to send from a partition
(C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c:0x1)
that no
longer exists.
Class: qqsp_DistAccessException
Error #: [601, 111]
Detected at: qqdo_PartitionMgr::SendMsg at
1
Error Time: Wed Feb 21 09:30:56
Distributed method called:
qqdo_NsServerProxy.FindObject
(object name
Unnamed) from partition
"CSA_cl0_Part2-router",
(partitionId =
C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c:0x1,
taskId =
[C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c.8]) in
application
"MWRouting_cl1", pid 18937 on node
forted1 in environment
frtedev
Exception occurred (locally) on partition
"CSA_cl0_Part2-router",
(partitionId =
C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c:0x1,
taskId =
[C61609A0-8270-11D3-88A9-F4D005D0AA77:0x10c5c.8])
in
application "MWRouting_cl1", pid 18937 on
node forted1 in
environment
frtedev.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching
members from
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Why not this:
while myText.moveToString(' ') do
myText.ReplaceRange('-', myText.Offset, myText.Offset+1);
end while;
or if you prefer verbosity:
while myText.moveToString(source=' ') do
myText.ReplaceRange(source='-', startOffset=myText.Offset,
endOffset=myText.Offset+1);
end while;
-----Original Message-----
From: FatchJeBAM.com [mailto:FatchJeBAM.com]
Sent: Wednesday, January 12, 2000 2:51 PM
To: Troy.Burnsvacationclub.com; kamranaminyahoo.com
Subject: RE: (forte-users) search and replace within a TextData
How about this?? May have to play with start/end on ReplaceRange as I
didn't really test this
Anybody got a better way??
-- replace space with underscore
For x in 1 to myTextdata.LengthToEnd() do
If myTextData.IsSpace() then
MyTextdata.ReplaceRange('_'. Startoffset=myTextdata.offset,
endoffset=myTextdata.offset+1);
End if;
MyTextdata.MoveNext;
End for;
Jerry Fatcheric
-----Original Message-----
From: Burns, Troy [mailto:Troy.Burnsvacationclub.com]
Sent: Wednesday, January 12, 2000 9:40 AM
To: kamranaminyahoo.com
Subject: (forte-users) search and replace within a
TextData
Hello all,
I need to search within a textdata object, replacing all
occurrances of a
space
with another character. Can you give a quick code example
of how I would do
this?
Thanks in advance,
Troy
Troy Burns
Marriott Vacation Club Intl.
E-mail: troy.burnsvacationclub.com
Phone: (941) 688-7700 ext. 4408
For the archives, go to: http://lists.sageit.com/forte-users
and use
the login: forte and the password: archive. To unsubscribe,
send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.sageit.com
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

Abap proxies ( Client and Server proxies)

Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
     Program ID: LCRSAPRFC
     Gateway Host: <Integration Server host>
     Gateway Service: <Integration Server gateway service>
     Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
Raj

Hello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj

How to Integrate Client and Server?

How to Integrate Client system and Server system?
A scenario which is working successfully in server system, not working in client system.
help me out in this issue.
pankaj.

This doesn't make any sense... ???
can you please rewrite your question?

HttpSession replication and server state saving

The UIComponent class is not serializable, certainly because it is the StateManager which is responsible of saving its state.
But the default server state manager of the RI stores the whole component tree in the HttpSession. That means that it won't work in clustered environments where the session has to be serialized for replication between servers.
Will this be addressed in the final release ?

E> This seems like a really BIG hole that Sun should fill very quickly!
Thanks for your input. Note: spec is intentionally very vague about the
specifics of state saving, except to say that the implementation must
support two options: client and server. Therefore, any solution
implemented in the Sun RI will likely be specific to that RI. Perhaps
we can consider standardizing the approach to clustering in a future
version of the spec.
E> I came across this thread because I am testing the viability of using
E> JSF in a JBoss clustered environment (and began getting serialization
E> errors when I add the <distributable/> stanza to my web.xml file). I
E> am probably not alone in my discomfort at having to replace a core
E> JSF class with a "patch" just to get session replication to work. Why
E> can't you or someone at Sun provide the resolution? All, that aside
E> you a JSF expert at least provide detailed specifics as to how the
E> proposed fix can be implemented by corporate JSF developers?
Here's one very important aspect of application architecture that I'm
surprised hasn't been pointed out before. Your application should be
designed such that the all user state resides OUTSIDE of the JSF
realm, and can therefore be made highly available by virtue of being
stored in something that does support HA. JSF UI state should mostly be
in request scope anyway. This is why we spent so much time on the
ValueBinding API.
E> Hope to see you at JavaOne (with more questions of
E> course)!
Yes, the entire Sun RI team, and several key EG members will be
available at BOF-2220
<http://www.javaone04.com/catalog/catalog/sessionDetail.jsp?hd=true&SESSION_ID=10589&form=searchform>.
Tuesday 29 June 2004 7:30 pm.
Ed (EG Member)

TOS and Server question(s​)..

Similar Messages

Maybe you are looking for

TOS and Server question(s)..