Toshiba 20AF45 has Black/White Picture

Hello I have a Toshiba 20af45 TV that is not showing the picture in color. I have both a 3 color av cord and the 5 color one.
I've tried to see if I can change it in the menu settings but there is no av input button. The menu under colorstream only allows me to change it from dvd to dtv. I do have a cable box as well attached to the tv.
Any help will be appreciated.

Is yellow video connector connected on the right place on your TV? I think you must connect it on the left side.
Check the pic I send you.

Similar Messages

  • Camera Raw and Black & White Pictures

    I am using Potoshop Elements 7.0 and I just downloaded the latest camera raw (5.2). However, both with the old and new camera raw plug when I import black & white pictures from my Nikon D80 in NEF format I see them as colour pictures in the PSE organizer. How can I keep the original format (black and white in this case) while importing the pictures?

    Your images are indeed color pictures. That's their original format. When you think you're shooting B&W, the camera built-in software just adds a flag for the camera manufacturer's raw converter to render them as B&W. ACR (Adobe Camera Raw) ignores that flag and leaves it up to you to convert the images to B&W through the method of your choice.

  • Exported black/white pictures are too dark

    Hi,
    My exported black and white pictures are too dark. I checked the pictures and the exif info contains information about the color profile RGB and sRGB (see below), but still the browsers (firefox and safari) ignore this and display the pictures way to dark. Is there a way to fix this? firefox has color management enabled and safari probably too. As for firefox: there are probably users that do not have color management enabled and it should work for them as well.
    Could the problems be due to the reduced 8bit color depth of jpeg?
    Any suggestions are highly welcome.
    Thanks!
    Color Space Data           
    : RGB
    Profile Connection Space   
    : XYZ
    Profile Date Time          
    : 1998:02:09 06:49:00
    Profile File Signature     
    : acsp
    Primary Platform           
    : Microsoft Corporation
    CMM Flags                  
    : Not Embedded, Independent
    Device Manufacturer        
    : IEC
    Device Model               
    : sRGB
    Device Attributes          
    : Reflective, Glossy, Positive, Color
    Rendering Intent           
    : Perceptual
    Connection Space Illuminant
    : 0.9642 1 0.82491
    Profile Creator            
    : HP
    Profile ID                 
    : 0
    Profile Copyright          
    : Copyright (c) 1998 Hewlett-Packard Company
    Profile Description        
    : sRGB IEC61966-2.1
    Media White Point          
    : 0.95045 1 1.08905
    Media Black Point          
    : 0 0 0
    Red Matrix Column          
    : 0.43607 0.22249 0.01392
    Green Matrix Column        
    : 0.38515 0.71687 0.09708
    Blue Matrix Column         
    : 0.14307 0.06061 0.7141
    Device Mfg Desc            
    : IEC http://www.iec.ch
    Device Model Desc          
    : IEC 61966-2.1 Default RGB colour space - sRGB
    Viewing Cond Desc          
    : Reference Viewing Condition in IEC61966-2.1

    Thanks a lot for helping me to track this down. Looking at EXIF information with EXIF tool I get:
    Profile CMM Type           
    : Lino
    Profile Version            
    : 2.1.0
    Profile Class              
    : Display Device Profile
    Color Space Data           
    : RGB
    Profile Connection Space   
    : XYZ
    Profile Date Time          
    : 1998:02:09 06:49:00
    Profile File Signature     
    : acsp
    Primary Platform           
    : Microsoft Corporation
    CMM Flags                  
    : Not Embedded, Independent
    Device Manufacturer        
    : IEC
    Device Model               
    : sRGB
    Device Attributes          
    : Reflective, Glossy, Positive, Color
    Rendering Intent           
    : Perceptual
    Connection Space Illuminant
    : 0.9642 1 0.82491
    Profile Creator            
    : HP
    Profile ID                 
    : 0
    Profile Copyright          
    : Copyright (c) 1998 Hewlett-Packard Company
    Profile Description        
    : sRGB IEC61966-2.1
    Media White Point          
    : 0.95045 1 1.08905
    Media Black Point          
    : 0 0 0
    Red Matrix Column          
    : 0.43607 0.22249 0.01392
    Green Matrix Column        
    : 0.38515 0.71687 0.09708
    Blue Matrix Column         
    : 0.14307 0.06061 0.7141
    Device Mfg Desc            
    : IEC http://www.iec.ch
    Device Model Desc          
    : IEC 61966-2.1 Default RGB colour space - sRGB
    Viewing Cond Desc          
    : Reference Viewing Condition in IEC61966-2.1
    Viewing Cond Illuminant    
    : 19.6445 20.3718 16.8089
    Viewing Cond Surround      
    : 3.92889 4.07439 3.36179
    Viewing Cond Illuminant Type
    : D50
    Luminance                  
    : 76.03647 80 87.12462
    Measurement Observer       
    : CIE 1931
    Measurement Backing        
    : 0 0 0
    Measurement Geometry       
    : Unknown (0)
    Measurement Flare          
    : 0.999%
    Measurement Illuminant     
    : D65
    Technology                 
    : Cathode Ray Tube Display
    Red Tone Reproduction Curve
    : (Binary data 2060 bytes, use -b option to extract)
    Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
    Blue Tone Reproduction Curve
    : (Binary data 2060 bytes, use -b option to extract)
    XMP Toolkit                
    : Image::ExifTool 9.53
    Doesn't this include the profile? I use Metadata wrangler and creative commons and morgify as plugins, but these shouldn't interfere with the profile, should they? I also experimented with disabling the metadata wrangler (by clicking disable), but this did not have any effect.
    Thanks a lot!
    Stefan

  • Photoshop Elements 9 - how to highlight one colour in a black/white picture?

    hi guys
    with which feature can I highlight just one object (one colour) when the rest of the picture is black/white?
    Thanks for your help!

    Open a color image in Full Photo Edit
    On the top menu click Layer >>Duplicate Layer >>OK
    Enhance >>Convert To Black & White >>OK
    Add a layer mask by clicking on the layer mask icon at the bottom of the layers pallet.
    Select a brush and adjust its size, then make sure your foreground color is set to black.
    Gently brush over the area where you want to show the color from the background layer. If you make a mistake change the foreground color to white to erase what you just did, then switch back to black again.
     

  • Black&white picture and very slow working HP Truevision HD

    Hello!
    Few days ago my webcam start working only in black&white and very slow - it's like slide-show.
    Problem in any program (Skype, windows camera, youcam...).
    I tried re-install drivers and even OS - nothing helps.

    Hi @tcheshire ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY dv7-7255dx Notebook PC and issues with the WebCam in black and White and slow moving. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
    When you look in the device manager do you notice anything with a yellow mark on it?
    Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
    Here is a document on how to troubleshoot and resolve issue with the Webcam.
    Hope this helps you fix the WebCam.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • When I sync a picture to my iPod 5G it goes into a black white picture from a colour, Please Help!!??

    Please could you help!

    Try deleting the iPod Photo cache folder and try again
    iTunes: Photo sync creates iPod Photo Cache folder
    What is the source and details of the format at the photo?
    Do other photos from same source sync OK?
    Do other photos sync OK?

  • DVI to Video is black & White

    Hi, I've just bourght a Apple DVI to Video PAL edition to use with my tv, but the picture is in black & white.
    Normal you get a black & white picture on the tv if you use ntsc stuff on european tv's, but it is a pal adaptor.
    Any sugestions to solve the problem?

    I've tried that, but it doesn't help.
    Do you, in fact, see the option to select between NTSC and PAL in the Displays System Preferences? (Just to make sure everything is being detected correctly.)
    Are you using an s-video cable or a composite video cable? Can you try a different cable and/or port on your TV?
    -Doug

  • FX 5200 nview??? HELP! black & white

    I just bought the FX 5200 128MB graphic , but I´m having problem with the dualview or nview. My TV screen is black and white. I have the latest driver 45.xx, but still I can´t get the TV showing color.. Im not sure if my s-video cable is broken or not (could that maybe be the problem then?), But I still get black & white picture. I´ve change the nview setting to s-video out, but it still doesn´t work..     Please Help

    I have the same problem also, but in more than DivX (WinDVR, Windows Media, PowerDVD etc...)
    I did not have this problem when I first installed the Card and drivers, but have installed many Codecs, Programs and MSI Updates that I cannot be sure when it fudged up.
    I wonder if it is similar to the Nero problem reported under the PC@nywhere Master in another forum?
    I have installed all latest drivers via MSI LiveUpdate but still SNAFU'd.
    Any other insights are appreciated!

  • Why, when I save a .BMP as Black & White, it is 256 color?

    AAARRRGGHhh!!!!!
    I HATE the MS Paint in Win 7!!!
    I want to save a .BMP with just TWO colors - Black & White -  for use in another program where I import a .BMP.
    However I can't import since I get an error that the .BMP is more than 256 colors....EVEN AFTER I SAVED AS BLACK & WHITE!!
    IF IT AIN'T BROKE, DON'T FIX IT!!!!

    Hi,
    This is just a warning to in case you do some mishandling.
    You can save the original picture in the desktop, then launch paint program. Click  ->Open to import the picture.
    Then save as "Monochrome Bitmap(*.bmp;*.dib)" tape, you will get the black&white picture.
    Karen Hu
    TechNet Community Support

  • Black & White and other colors in Aperture

    How can I color a part of a black & white picture in Aperture. I mean, if I have a color picture, reduce saturation to convert the picture to black & white and then just color the pants or shirt of the person that is in the photo but the rest remains in black and white.

    You can only do this in Aperture if that's the only occurrence of that colour in the picture - in which case you can use the colo(u)r sliders.
    Otherwise you need to use something like Photoshop (http://digital-photography-school.com/blog/mono-with-a-dash-of-colour-photoshop- cs2-tutorial/)

  • Black & White photos printing as purple

    My wife was copying some historical black & white family photos.  Six or so printed fine, then one photo changed from black & white to a purpleish tone at the 90% complete phase, only the bottom edge had changed colors.  We loaded another black cartridge believing this was the cause, but to no avail.  Now all Black & White photos are printing in purple.
    Standard printing is fine.
    Copying is fine.
    Scanning is fine.
    But photo printing of black & white pictures results in the copies being 100% purple toned.
    Why?
    HP 6510 printer, only two onths old.
    This question was solved.
    View Solution.

    The printer uses color ink to print black when printing on photo paper because the pigmented black ink is not compatible with photo paper.  It appears you have run out of yellow ink.  I would suggest the troubleshooting steps in the document here to resolve the issue.  Be sure to check the vents on the yellow supply as shown in solution two.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Picture on TV appears black & white

    I have successfully connected my Toshiba laptop to my TV using the TV out (S-Video) connection to SCART. I have now purchased a new TV which is HD LCD but upon connection the screen is black & white.
    I have searched everywhere and tried any possible combinations, but obviously not the right one as I can not resolve it.
    It must be something simple, as I was able to view in color in my previous TV, but now I only see black & white in my new LCD TV.
    Could anyone please advice?

    Hello Dimitros
    Believe me I have pretty much experience with connecting notebook to TV and LCD TV and all you must do is to enable the right port on your TV.
    I have BRAVIA LCD TV and have tested several notebooks with different cables and adapters (S-Video, chinch, SCART, HDMI) and switching to the right channel (right port entrance) I have had perfect picture. For example, on my brothers JVC LCD TV those settings are not so simple and after almost half hour we were able to enable the S-Video port.
    I will just say that settings are different on each LCD TV. If you can not do anything please talk with your local dealer. For TV experts it should be no problem.
    But be sure: it has nothing to do with your Toshiba notebook.

  • Canopus ADVC110 is giving me Black and White picture which is misaligned

    Very new to Analogue to Digital converting so please forgive ignorance!
    I am in the UK. I have Canopus ADVC110 is giving me black and white pictures which is misaligned and shows specked picture noise. I see bottom on one frame and top of another with a black line ("frame" rebate?) running through the middle of the monitor screen in iMovie.
    I have leads from my camera plugged into the front of box and firewire out of the back into MacBook Pro running iMovieHD v6.0.3.
    I have set the dip switches to both PAL and NTSC just in case I got the output from my camera wrong (even tho' says Pal on it).
    In iMovie I choose DV as video format and it picks 29.97 fps automatically. iMovie shows me the capture is NTSC from the Canopus box.
    The Canopus website has poor support so I am at Discussions mercy!

    As you're in the UK, you MUST use the 'PAL' setting, and choose a new Project in iMovie to be 'PAL' ..that's 25 frames per second.
    If you do that, your import will be OK, instead of of shifted and black-&-white.
    Work with Pal throughout (25fps) and you'll be OK. Set iMovie's Preferences to PAL 25fps, then Quit iMovie and restart it, to force all future Projects to be PAL 25 fps.
    Do the same, too, for iDVD if you're going to use that to burn DVDs after you've edited your movies.

  • Why does a black and white picture come out with a tint?  iPhoto, Canon

    When I print a black and white picture from iPhoto, it comes out with a tint.  How do I prevent that? iPhoto, Canon MX310

    Hey neil293,
    Thanks for the question. If I understand correctly, when you print a photo in iPhoto it has a tint. I would recommend that you read this article, this article explains how to adjust the tint in a photo. 
    iPhoto '11: Adjust exposure, contrast, colors, and other qualities
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • Hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    You may want to read this I imported a mix of color and black and white raw files but lightroom changed all the black and white file to color?
    The Black and white you see is just the cameras representation of the "raw" pixel information straight from the sensor. The RAW file format has yet to undergo demosaicing, and so it contains just one red, green, or blue value at each pixel location.
    Lightroom, or any other RAW processor, doesn't recognize the in-camera processing because it is unique to the camera.

Maybe you are looking for