TOSHIBA 24PB2V1 NO PICTURE BUT AUDIO WORK

I HAVE TOSHIBA 24PB2V1 NO PICTURE BUT AUDIO WORK
THE LED POWER LIGHT GREEN
BUT NO PICTURE
JUST SOUND WORK GOOD
It happened when the power goes when the TV works
When I tried to run again vanished's just a black screen without image
Data or information screen does not show

check the voltage of the inverter, it is likely a problem about his power or himself

Similar Messages

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

Can't Video Chat, but Audio Works Great

Hey guys....I have been trying my hardest to get my IChat video feature up and running.
The audio works great when conferencing and obviously the im works fine. Myself and the person I am trying to video chat with both are using AIM through IChat. Here is the error message I am getting -
2009-04-06 13:53:14 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
Video channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
If I restart my IChat and send a video chat invitation I can initially see the person on the other end. But, the picture then freezes (almost instantly) and then I get the error message.
Any help would be very much appreciated. Thanks.

Hi,
Two possible things.
1) Go to System Preferences > Quicktime > Streaming tab and set the speed to 1.5Mbps and relaunch iChat so it "sees" the new speed.
2) Check your modem/router for any DoS (Denial of Service) or SPI (Stateful Packet Inspection) feature and turn it Off.
Examples
Netgears have either DOS or SPI in the WAN Page
Netopias have this Feature as part of the Firewall when you use a setting higher than Low.
Linksys tend to have the same in the firewall in the Security tab.
Basically they can be anywhere in the set up pages as the manufacturers never put them in the same place.
Both features examine incoming data to see if it is an attack.
In an iChat video chat so much data can be sent from higher speed processors over high speed inter net connections that it is regarded by DOS as a attack.
SPI tries to evaluate the validity of the data and tend to get overwhelmed (Simplified view).
192.168.1.3 looks more like an IP from a Linksys than the other two examples.
9:24 PM Monday; April 6, 2009

IMovie HD - Clips are black but audio works

We're using iMovie HD on MBP with OSX 10.6.8 to edit HD footage. The project was started on another computer using the same version of iMovie (5.0.2). On the new computer, all clips show up as black, but the audio works. The footage is full HD in .mov format at 29.97fps. The clips play fine in Quicktime, but the video doesn't show up in iMovie!
We tried importing a new .mov into the project, and the same thing happened - we hear audio but the picture is black. This clip also plays fine in QT.
Is there a codec or driver that needs to be installed to get the video working? Has anyone else encountered this issue?
Any help will be greatly appreciated! Thanks in advance!

I had this problem on my Hitachi 51" HDTV RP and HD DVR box....I went from the HDMI out to the DVI in and would lose video but not audio. Then I went to component input and all was well then it happened again. I finally figured out that since the upgrade to 1.5 IMG (new guide) I did a box reset from the Verizon internet site and have not had the problem since.
Set up your verizon account then go in "Fios Tv services" and check off your boxes and hit "reset box" and your problem should be solved. Like I said since the reset 3 weeks ago I have not had a problem. Remember, simply unplugging it then plugging it back in will not work....reset it from online.
Btw, some settings may be lost (parental controls,etc).....

No picture but audio?

Hi all,
I have downloaded a video in mp4 format which I get each week. When playing the video I'm getting audio play back but no picture! I'm running os x 10.6.3 with latest version of ituens. Have tried re-downloading the file but no joy my friend has tried downloading the file & it plays ok so I'm guessing it's not a file issue.
Any help would be awesome!

I recently discovered this very annoying issue after buying a new computer that came with 7.6.6. To my dismay a number of .mp4 clips of mine don't playback video in QT7 so I can't edit them any more.
What worked for me was to download the 7.6.4 version of Quicktime for Leopard here:
http://community.avid.com/forums/t/79244.aspx
Right-click the package, open package contents. Look for archive.pax.gz and copy it out to the desktop and double-click. It will unarchive a bunch of folders. You need the H264 component from the system/library folder and you need the Quicktime 7.6.4 application and if you want pro features, the system/library/preferencepanes file.
Right-click the broken 7.6.6 player and compress it then delete it - it crashes trying to use the working H264 component. In case Apple get round to fixing it, you can just unzip it.
Drop the 7.6.4 Quicktime app in your utilities folder or if you prefer, in the applications folder where it deserves to be.
Then drop the H264 component into /Library/Quicktime. Don't put it in your /System/Library/Quicktime. The /Library folder will override the system one and should you need to revert back to the broken H264 component, you just remove the one from /Library. You may need the mpeg4 component too.
Drop the prefpane into /Library/PreferencePanes to let you register QTPro.
Now my .mp4s playback fine with video and audio. Honestly, it's bad enough that Apple neutered QT Pro and tried moving people to QTX but to break such an important aspect of the playback on shipped machines is very poor.
Others have noted the issue as far back as 5 months ago and no fix from Apple:
http://discussions.apple.com/thread.jspa?threadID=2383580&start=0&tstart=0
It seems they regard Quicktime Pro as a legacy app and I wouldn't mind it if they added the same features in QTX but they haven't. We just have to hope they don't drop the app altogether like they did with a certain other pro application they nuked in favour of a less functional app.

Frozen Video Playback But Audio Works

I'm stumped tonight. imovie froze in the middle of a clip trimming. When it came back up the project will not play properly. The audio plays, but the video is frozen. I can skim through the video down in the events browser, but the project is worthless. Additionally, when I pulled up an old project it gives me the same symptoms. I've restarted multiple times. I've dumped the .plst....I don't have any ideas. I will reload the software, but does anybody have experience solving this problem? I've seem the question asked several times here, but no answers.

As I posted today, just noticed this as well. Imovie worked just fine about 2 weeks ago.
http://discussions.apple.com/thread.jspa?threadID=2298823&tstart=0
can someone merge these posts? It seems like a recent concurrent issue.

Why can't I stream video from my iphone to Apple TV but audio works fine?

I can't figure it out. Using Airplay, the audio from a movie in Itunes plays on the tv and a small icon in the bottom left of the screen but no video. Help please?
I have an iphone 3gs.
Thanks, Mitch

Welcome to the Apple Community.
Ensure that all your software is up to date and restart both devices if necessary.

Audio problem with one episode of iTunes tv show on two apple tvs but audio works fine on same show on iMac

I have a season pass to Dr Who and all 30+ other shows purchased on iTunes work great. Last night's episode (Hide) has a hissing sound so loud it drowns out all the audio in the show when i try to watch it on my Apple TV. I then downloaded the episode to my iMac and my iPad and no audio issues there. However when I tried playing it shared from my iMac to the Apple TV and the audio problem was there again. Same thing happened when I tried to AirPlay from my iPad to Apple TV.
I have two Apple TVs. One is latest model w latest upgrade, the other is generation before without latest upgrade. Same audio issue on both. I have tons of iTunes TV shows and movies and this is the only episode with an issue. Something is wrong with this file that causes it to screws up the audio on Apple TV.
Has anyone else seen this kind of audio issue specific to just one TV episode or movie? Anyone know support path for iTunes problems?

If other episodes play Dolby Digital fine this could be a file encoding problem - they sometimes get it wrong.
I suggest you all contact Apple about the problem via itunes store support here:
https://expresslane.apple.com/

Pavilion g6-1b70us. Picture but no sound from tv when using HDMI. Previously worked no problem.

I have a pavilion g6-1b70us that I am trying to hook up to my tv with an hdmi cable. I get a picture, but no sound. This previously worked with no problem. When I pull up my sound playback settings the only options are speakers and headphones. When I pull up my devices, the Samsung tv is there, but is described as a "generic monitor" (thought that was weird). I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV. Also, I will mention that in under control panel>devices and sounds there is a link to SRS Premium Sound. As you can see in the picture below, the Samsung device shows up, but it is grayed out and cannot be selected. Can someone please help?
This question was solved.
View Solution.

Well in case anyone is interested I fixed the issue (only took me 12 hours to figure out, lol). Apparently even though the Samsung tv was not appearing in the sound playback options, you can still right click in the blank area and an enable/disable option will appear.

After 1.6.2 update, I have hd picture but no sound, tv says hdmi audio unavailable

I have hd picture but no sound, tv says hdmi audio unavailable , this happened right after update 1.6.2 my television is an HP PL4260N, I saw on other post in fixya.com other people with same problem after update too. Any ideas on fixing this? I already spent 2hrs with tech support trying to fix this and no luck, they had me use components I never had any problems before this update, is there a way to go back to 1.6.1? One more thing my standard channels work fine (video & audio)

You may need to revert to using component cables until they hammer out the issues with HDMI. Just hang on to that HDMI cable for future use when these issues are resolved. You will not see a degrade in picture quality with component cables. Only downside is the added cabling mess.

Audio Working but No Visual

I have multiple movies on my mac all saved as .avi and when i open them to watch in quicktime the audio works perfectly but I get no picture, just a black screen. Help me!

Welcome to the forums!
Download and install Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

My iphoto won't open. it seems like it's charging pictures but it's not working

hello goodmornig,
i'm writing because i need help with my iphoto. it got stucked. seem like it's charging the pictures but it just won't work.
i can't see my pictures.
i would like to know what's going on!
please help!

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

TOSHIBA 24PB2V1 NO PICTURE BUT AUDIO WORK

Similar Messages

Maybe you are looking for