Toshiba 32C120U "no video signal" from my Mac Mini using HDMI to HDMI.
My Toshiba 32" 32C120U is not getting video signal from my Mac Mini. I bought the Mini for my son and this is his TV. I have hooked up the Mini to my older 22" Toshiba and my 56" Samsung with the same HDMI cable and it works great on both. What the heck is wrong with my son's 32" Toshiba? I did update the firmware on the TV and the Mac Mini has been completely updated as well.
I have also tried both HDMI 1 and HDMI 2 ports with his Xbox with success, so both ports work. I have also tried both ports with the Mac Mini and there is "no video signal" on both ports. I noticed that when I hooked up the Mini to the other TVs it automatically selects the best video setting, so there is obviously some communication that happens between the Mini and TV, but that is not happening with my son's TV.
Any suggestions would be greatly appreciated.
Thanks in advance,
John
I solved my issue . . . returned the Toshiba for an Insignia . . works great.
Similar Messages
-
Fuzzy text / pics from new mac mini using Samsung TV
I'm using a Samsung 420p TV as a monitor, connected via HDMI cable. Looks perfect on my older PC. Any suggestions?
Hi Jamie,
See if this helps...
https://discussions.apple.com/message/18379474#18379474?ac_cid=op123456%23183794 74 -
I would like to connect my HDTV/Monitor to my mac-mini using HDMI but it does nothing
Any ideas?
Check the User Guide for your TV monitors and see if you have it setup correctly.
-
How do I get home video clips from iMovie Mac to iMovie iPad? Surely there is some degree of cross-compatibility? I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move. Any ideas? (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)
I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
I would like to connect my MacBook Pro to my tv to watch videos, but I only have a usb connection on the laptop. Is there an adapter to go from usb to hdmi for the mac?
You will need a cable such as this for video:
http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM
This will be attached to the minidisplay port.
For audio, you will need a cable such as this:
http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP
This will be attached to the audio output port.
Ciao.
Message was edited by: OGELTHORPE -
how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?
Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google. -
Since I have installed Lion onto my iMac it's impossible to to copy any video file from the mac to an external support (ups-stick, Timecapsule). What's happened? What can I do?
If you just did upgrade Lion, give it some time. I recall having similar problems and some articles mention heavy background work after install - such as re-indexing for Spotlight etc. I couldn't even copy from folder to folder or e.g. iphoto to folder on the same disk. Went away after a day or two though.
I do however still have a problem with AFP access to one of the lion machines - kills it's network adaptors rather quickly. No luck solving this so far :| -
I have no audio from the mac mini to the hdtv via hdmi cable.
This started immediately after the latest "apple software update" I updated it automatically on 6/24/2011. I have an elgato eye tv connected to the mac mini that provides BOTH audio and video through the HDMI to the HDTV. The elgato eye tv works fine. I get both audio and video.
However, I only get picture and NO sound from the mac mini to the HDTV via the HDMI output. No streaming audio either - only picture. Ive tried pandora, netflix, hulu, etc. I even put in a DVD into the mac mini and again I receive a picture through THE HDMI but no audio.
I've shutdown and rebooted. I've disconnected power and reconnected power. I've gone into the system preferences, audo, and highlight the SONY HDTV as the output. But still nothing. I do notice when I toggle between the "internal speakers' and the HDMI option, the audio arrow on the lower right is bright blue during the internal speakers option but is grey when the HDMI option is connected.
I called apple care. Since I'm 98 days past my 90 days of coverage there is no help via human being. They offered me to set an appointment at the local apple store but they suggested I bring down my 60 inch HDTV with me to the store to be sure it is not a "Sony" issue. I hope someone can help me resolve this without having to put this mac mini on craigslist and taking a $ hit.
This was not an issue yesterday. It became an issue after the latest and greatest "update" to prepare our machines for the lovely lion.
Thanks.I have the same issue. I also have the 2010 mac mine and use hdmi for audio to my receiver. I get audio from eye tv with no problems, but it seems to lock the path so that only it can use that path for audio. If I restart the computer and do not start eye tv everything else works with hdmi audio. I have tried using the system settings and changing the source there but it doesnt seem to matter.
David -
Installation of leopard from one mac mini to another with dead CD/DVD drive
Is it possible to install Leopard on to an older mac mini that has a nonfunctioning CD-RW/DVD-ROM drive but otherwise works fine for what it is
Hardware Overview: Machine Model: Mac mini
CPU Type: PowerPC G4 (1.1) CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB Memory: 256 MB
Bus Speed: 167 MHz Boot ROM Version: 4.8.9f1
Serial Number:
TOSHIBA MK4025GAS:
Capacity: 37.26 GB
Model: TOSHIBA MK4025GAS
Revision: KA100P
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk0
HARD DISK:
Capacity: 37.13 GB
Available: 9.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /
MATSHITA CD-RW CW-8123:
Manufacturer: MATSHITA
Model: MATSHITA CD-RW CW-8123
Revision: CAD4
Serial Number:
Drive Type: CD-RW/DVD-ROM
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
FROM a mac mini that HAS a functioning CD/DVD drive
Model Name: Mac mini
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.9f4
Serial Number:
MATSHITA CD-RW CW-8124:
Firmware Revision: DACD
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
I thought maybe I could do it with firewire but no luck...
any help would be greatly appreciated
Message was edited by: Moderatork...
Boot the mini into TD mode
Connect it to the "other" Mac
Insert the install disk in the "other" Mac
Start the installer which will reboot the "other" Mac
Once the "other" Mac has restarted and is running from the install disk, you should be able to select the Mini's drive (the FW disk) as the install destination. If not, go into the Disk Utility (under the "Utilities" menu) and check out the FW disk. You may need to "repair" it, repair permissions or reformat it depending on the condition of the disk and the type of partition it contains. -
Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
What can I do to get it to work again as more than an overpriced paperweight?Hello,
Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution. -
Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?
That does not involve iPhoto for the Mac in any way - try the iPad forum
I will request your post be moved
LN -
How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred -
When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call. -
I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop
I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work? -
I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics
Maybe you are looking for
-
Using IF in a for each loop which is grouped by two fields
Hi , My requirement is to filter the Payment records ,based on the parameter input date and also group by based on two of the Fields and calculate the sum of the payment Amounts. I have created a for each loop with the group by first on one field and
-
What happened to my transform controls?
Hi Can someone tell me why my transform controls won't work after saving a file in .psd format and closing the program? When I reopen the file I can select the layer I want to edit but I have no transform controls. Please help !! (I'm using Photoshop
-
I thought this was space bar. But the keycommands for it dont seem to be working (Play from Selection). And when i added my own custtom key command for space bar the symbol the key command manager gave me was something like this: ⊔
-
How to setup the printer Urgent
Hi Gurus, I m trying to setting up the printer , please guys help me out i gone thru SPAD , but i could't able to setup please guys help me out it's very urgnet
-
How do I know what URL to visit? I registered last night for the Captivate seminar. I checked my Adobe membership area, all my email, registered again using a different Email, both times Adobe said I'd get info in an Email. But they don't send the Em