Toshiba 32LV67 tv dvd combo wont turn on/Disc light blinks repeatedly

I have the 32LV67 dvd combo and the disc light just keeps blinking when i plug it in. i read somewhere that you can re-install the firmware but i cant find it anywhere. Please help me!

There is no firmware downloads for that model.
Try leaving it unplugged from power overnight. If the problem persists, it may require servicing.
- Peter

Similar Messages

  • Toshiba 24LV411U TV/DVD combo turns off

    I have a Toshiba 24Lv411u TV/DVD combo.
    When turn it on the red light turns green for about 10 seconds then it turns itself off again.
    I unplugged it for a few months...went back to it today and it worked fine for a few hours.
    Now it's back to the same old turning itself off again.
    Any ideas?
    Thanks

    Toshiba 24LV411U is not known to me but from my point of few its hardware malfunction.
    Maybe something wrong with main board or other electronics parts.
    Sorry mate but I think its impossible to say whats wrong exactly without detailed check.

  • 22CV1000 Toshiba LCD TV/DVD combo: Sound but no display

    I am having problems with my 22CV1000 Toshiba LCD TV/DVD combo!
    When I turn the tv on, it sounds like it is trying to read a DVD. The display appears for second, but then goes black. I still have sound, just no display. 
    The Toshiba help line told me to unplug and replug the tv - but that did not help.
    I would really appreciate your advice!

    At this point, I think you should call support back. It sounds like it might need a repair.
    - Peter
    - Peter

  • Hp pavillion dv7-3065 laptop will not turn on - led light blinks, ac's light on?

    HP Pavillion dv7-3065 with Windows 7.
    I fell asleep two days ago, and when I woke up yesterday, my laptop was off. (The battery very well may have died while I was sleeping, or just shut off on its own. I don't know which.) I tried turning it on, but nothing happened... except for the lightning bolt (LED light) blinking three times. No noises inside, blank screen, nothing aside those three blinks.
    For the record, I've already tried removing the battery. I've also tried removing the battery, removing the AC cord, and holding in the power button for 30+ seconds. It didn't work.
    I've tried removing the battery and running off AC. This still doesn't work. However, the laptop recognizes that it's plugged in; the little light by it is consistantly on. I've also tested my laptop with another AC adapter just to be safe. Nothing.
    My laptop has been tested without harddrive/etc, but I'm still at a blank. I don't know what else to do. My boyfriend, who's in school to be an IT, took it into his teacher, who messed around with it, and came up with a few conclusions.
    He believes that because the lights are flashing, he's confidant that my motherboard is fine. He said to replace the battery, and if that doesn't work, solder the ...I forgot what exactly, but basically it's the charging connection. I forget what exactly. My apologies there.
    However... I feel like replacing the battery would be a waste of money... Because regardless of battery, the laptop should still turn on with the AC cord. My boyfriend intends to bring this up and ask if he can just skip to the other thing anyway, but he doesn't have that class again for a week, and I'm at a loss of what else to do. Aside from that, his teacher says there's a limited number of other things that could be wrong...
    I was hoping to get some more input... 

    This won't help you out, but I am experiencing the same problem... I am gonna look on this post to see if you get an answer!
    I have the same problem! Except I did manage to get mine to turn on. After doing the hold the power down thing. Nothing happened. I did leave the lap top on cause I was irritated and walked away, about an hour later it came on. It let me turn it on and off a few times. Then stopped. Then leaving it sit on stopped working too

  • Pearl 8100-Rogers not turning on-Red light blinking

    Hello
    I have new Blackberry Perl 8100.I got this from Rogers.It was sitting in box for few month.I tried turning on but it is not turning on.I left the phone in charge for more then 2 hour and it is still not turning on.
    I tried taking out battery but and replacing back in but stillit is not turning on.I can only see red light blinking.nothing else.pls help me .thank you.

    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Z2 wont turn on red light

    my xperia z2 abruptly turned off while there was 10% battery was remaning since then i tried every thing pressed all three buttons together power volume and tried that red button on the side of sim tray nothing is working out this is very worrying moment for me plz some help

    You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • HT4061 phone wont turn on  apple logo blinks when plugged in

    My phone will not turn on

    ok? does it show a USB cable at all?
    If not- try a hard reset. Press the top power button, an the hom button- both at the same time unti you see an apple appear and then let go. Your phone will then restart.
    (do not have it plugged in wile you do this)
    If it gives you any errors or solves your problem, please write back and let us know.

  • CD or DVD icon wont show when disc inserted?

    Im not sure why its happening now, but when i put a CD or DVD disc in it doesn't show on the desktop as an icon ........
    there used to be a 'mount disc' years ago but i cant find it ...what can i do to make it appear?

    Finder->Preferences->General->enable showing of CD/DVD on Desktop. Also, System Preferences->CDs & DVDs->enable appropriate settings.

  • PS4 Console wont turn on ( No light or anything else)

    My PS4 i have had for under forty days has stopped working, i try to turn it on by pressing the power button but i doesnt work and i have also tried to turn it on using the controller but still nothing. Recently i took off the cords and opened the PS4 to see if that would help, still nothing. This has happened before numerous times but when it did all i did was put the power plug out and then back in AND boom it was working, but now this time i tried that but it didnt work. help please. 

    Check the fuse in the plug  Opening the console when it's only 40 days old has invalidated any warranty so you can't even take it back to the store for an exchange

  • My HP G56 Wont turn on (Caps Lock Blink)

    Heyy guys
    so i turned on my HP G56 Laptop this morning and nothing happens but the caps lock blinking and the wifi and power lights are red. i found online some codes but the caps lock codes when upto six, my laptops caps lock keeps on blinking and doesnt stop. it blinks around every 4 seconds.
    HELP????

    Hi sahibsahib,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some problems with your laptop. That blinking light does indicate a hardware problem. It should be blinking in some sort of pattern and it will repeat. If just keeps blinking every four seconds then it could be just one blink which would indicate a CPU failure. This HP support document on Computer Does Not Start and the LEDs Blink will show you the various blink codes.
    If you have purchased the laptop within the last year you are in warranty and I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America. If you are out of warranty you can still contact HP but there would be a charge or you can take it to a local technician.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My appletv wont turn on (the light) and I only purchased it in the last six months. what's the go??

    the light was coming on this morning and now it's not, is this just a 'resetting' issue or a common problem? I just can't believe it's not very old and this is happening.

    So you have no signal on the TV?
    Could be something simple like a fuse in the power lead.  If you have another similar one try that.
    Device failure after such a short usage is not common but not impossible and some will - if only 6 months old it will be under warranty (and the remote).
    If you have a micro USB lead then you could hook it up to a computer running iTunes as described here to see if the software is corrupted and it will restore:
    http://support.apple.com/kb/HT4367

  • Wd my book 500gb studio edition wont turn on, white light half lit

    Hi,
    I have a Western Digital My Book 500GB Firewire/eSATA/USB 2 Studio Edition external hard drive that i bought 2-3 years ago. I've backed up a lot of data then and after that not used it at all until recently. I can't seem to get it to mount under Lion, as soon as I plug in the power lead the white bar of light at the front of the drive lights up but only the top half of it, there are no noises and plugging in a USB lead does not show the drive on my iMac.
    Can anyone advise please, there's tons of data and I have only used the drive literally a few times. I just checked and my limited warranty expired six months ago so I can't ask WD to help.
    Any help is greatly appreciated.
    Thanks.

    To give the conclusion in case anyone googles to here. I had to pry open the original WD enclosure and get the hard drive out. It's a big, cheap, plastic box made to resemble Apple's shade of silver, thus giving false confidence in quality of build which is atrocious.
    The hard drive itself is perfectly fine, all the data is intact and transfer is at full speed. I had to get an external SATA to USB adapter and connect it to my iMac via a USB port. From there Lion treats it as any other external hdd.

  • Blackberry curve wont turn on or even blink when plugged into a wall charger. what should i do?

    so i completly dissasembled my 8310 to see if there was a short somewhere and i didnt find anything obvious. i was playing aroung trying to find the problem when i realized that the red light comes on when i plug in the wall charger and the LCD is not connected. but if i plug in the LCD then try to charge it, the light will not come on. could this possibly be a short within the LCD that is causing the whole phone to fail? what should be my first step?

    Bring it to an Authorized Apple Repair Center.  They will likely help you replace it.
    Here's how to find one:
    Find an Apple Authorized Service Provider

  • Tv wont turn on power light binks 2 times

    I have a kdl-46nx800 .  It shut off one day now blinks 2 times for a code that sony says is a power problem. Help please. I tried unplugging everything and plugged it into a new outlet same thing. Anything else i can try at home???

    Hi kels_pierce, and welcome to the HP Forums! 
    I am sorry to hear that your computer shut down on you and now it will not boot up for you. I will try my best to help you resolve this issue. To better assist you, could you please tell me the model number of your computer and the operating system you are running on it. Here are some guides in case you need them.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    I am also including this document for Computer Does Not Start and the LEDs Blink or the Computer Beeps that may help resolve your issue.
    I hope this helps,
    I worked on behalf of HP.

  • My BB Curve will not turn on; red light blinking

    My bb curve 8330 will not turn on, charge, or do anything other than flash the red light at me. I tried removing the battery and have tried charging it, but nothing seems to help. Any ideas?
    Solved!
    Go to Solution.

    Nevermind, I resolved the issue by removing my memory card.

Maybe you are looking for