Toshiba 32LV933G does not start up - only standby

I'm looking for a memory dump (SPI Winbond 25Q64FVSIG U7).
Tv all the time on standby and will not start.

Try to disconnect all cables and remove it from the mains plug.
Then wait some time and connect it again to the power.
In case this does not help, you would need to contact an service engineer in order to check the TVs hardware. Hopefully the warranty is still valid

Similar Messages

Photoshop does not start, instead, only annoys with CS6 Extended Test Version

Hello all,
since today, after a correct start, when starting Photoshop CS6 (Windows), only a dialog stating "Login for CS6 Extended Test Version" (or similar, as the text is in German). Afterwards, Photoshop simply exits. How do I get rid of this and make PS start as usual, as I do not want to test the extended version.
Thank you and best regards,
Dirk

Thank you for this information. I do not use Creative Cloud and just purchased Photoshop CS6 for my laptop. When I install Application Manager as suggested in the link, I get a Creative Cloud icon that -- when clicked -- asks me to enter my Adobe ID. I deliberately do not want to use Creative Cloud, just continue using CS6 on my laptop.
As the startup screen insists on entering my Adobe ID, I did. And now Photoshop starts as Extended in test mode and does not allow me to (Help ->) Deactivate.
How do I get rid of this Extended test license (I do not need the "Extended" features) and return to my original one computer CS6 license without having to use Creative Cloud.
Thank you and best regards
Dirk

Sometimes when starting my iMac it shows a folder icon with a Question mark in it. Mac does not start up, only when shutting down and restart again solves it

Sometimes when starting up my iMac it shows only a folder icon with a question mark in it. Nothing happened. Only when start up again it runs ok.
What can be the cause of this.
thanks for your help
Hans

That's an indication your Mac can't find a system folder to boot from.
Open System Preferences > Startup Disk
Select: MacintoshHD OS X
For OS X v10.4, v10.5, and v10.6 > A flashing question mark appears when you start your Mac
Helps when you ask for help to tell us which Mac OS X is installed.
If you aren't certain, click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
The version is noted there.

After update 7.1.2 Iphoto does not start

After installing the 7.1.2 update, Iphoto does not start anymore. only the Icon bounce in the dock a few times.
Restoring the previous Iphoto.app in the applications folder resolves it and iphoto works O.K.
when i install the 7.1.2 update it again does not start.
Can someone help me with this??
Roland

You should probably post in the iPhoto discussions:
http://discussions.apple.com/category.jspa?categoryID=143

OS X Lion does not start. Black screen, please help me!

I have installed OS X Lion. I updated software (safari and itunes) and after it rebooted screen went black.
Now It does not start and only shows a black screen. What can I do?
When I turn it on, ventilator obviously starts but beyond that there is nothing to indicate that it is on....

This may be a hardware failure, but there are a few things you can try.
First, disconnect all wired peripherals and try to boot in safe mode (shift key held down at startup.)
If that doesn't work, boot from your recovery partition (command-R at startup.) If you can do that, reinstall the Mac OS and try again.
If that doesn't work, reset the NVRAM and PRAM:
Resetting your Mac's PRAM and NVRAM
If none of that works, take the unit to an Apple Store for service.

HT201412 my phone restore but does not starts it shows only apple logo please help me

HI
My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

See your other post on this Topic...
https://discussions.apple.com/message/22315227#22315227

T400 does not start up with a battery and AC, but starts up with only AC.

I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
a few possibilities
1) a battery is dead - but it does not explain the failure with both AC and battery
2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
3) Mother board failure??
I really appreciate if you give me some advice on it.
Wanyong

Thanks for all your kind and helpful comments.
Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
-WS

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

Satellite A200 does not start anymore.

Hello, im trying to find a whats going on with my laptop. It's a Satellite A200 on Windows 7 professional.
From a few days ago i cant start the laptop anymore. It doesnt look like a software issue because when i push the power button, the only thing that happens is the power led turns on (blue color) and, 2 seconds later, starts to blink orange. And never passes this stage.
The screen remains as off, and i think, the BIOS does not start as well.
Ive already tried to remove the Ram and the hard drive - Keeps doing the same. Doesnt even bleeps over the missing Ram or drive!!!
Anyone have any ideia about whats going on??!! Please anwser!
Sorry for the english. Portugal here ;)

> Do you kown if this is a comom problem with this laptop model?? Because i have read in a few forums that is a common problem with this laptop
Unfortunately, this is a common problem for many laptop models. My old laptop (non Toshiba one) also had such problem with southbridge malfunction. I just threw it into garbage as replacing mobo is pretty expensive procedure. it's better to buy new one or second-hand

Satellite C660 does not start up

Yesterday we purchased a Satellite C660 with Windows 7 64bit installed. Worked just fine but today the laptop does not start up again. Updates were installed but after pressing the power button the light of the hdd turns on for a few seconds, the vents work for two seconds and then ... nothing !
Please help !

You cannot start notebook at all?
Can you enter BIOS settings with F2 at start up?
Which updates have you installed?
If nothing works you have only one choice: either bring it back to your local dealer and ask for replacement or contact Toshiba service provider directly. They can check hardware and help you with this.

50L7333 Youtube not working, video does not start

Hi,
I am trying to solve the issue with Youtube. Unfortunately I cannot.
The problem is that in Toshiba Cloud everything works, application is visible. When I enter I can search videos, I can pair it with my laptop, but I cannot see any movies. Zero, nothing. When I try, there is only a title, some information about the clip but it does not start.
I restarted tv, the same issue was 24 hours before without having TV plugged to electricity, also putting google dns did not help.
Do you know any solution?

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Satego X200 does not start

My Satego X200 does not start since it hangs...
The Power Led lights up for 3 seconds, nothing more. I wasn´t change something since the last half year. What happend???
2 days ago it started and worked for an half hour but after this, the same problem... Toshiba give me no answer about my question and i wait since one week...

Hi
Nobody can provide exactly answer to your issue.
I mean only an technician who checked the single parts can say what part could be affected and faulty.
We can only provide some suggestion
First of all remove the battery and disconnect the AC adaptor. Wait 1 hour and connect both parts again.
Then try to power up the unit. If this will not help then its a serious hardware problem and you should get in contact with authorized service provider in your country.

Toshiba 32LV933G does not start up - only standby

Similar Messages

Maybe you are looking for