Toshiba 40L7335D turns off by itself after several hours of use

My Toshiba TV 40L7335D periodically turns off by itself!!!!
Bought a few days, everything else is working perfectly during the day but after several hours of use of the TV is turned off!
Is a problem that someone else has or knows??

Please check the user manual *page 74*
http://www.toshiba-om.net/LCD/PDF/English/L7335-4050-English.pdf
_Energy Saving Settings_
+The TV will automatically turn itself off (Standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel.+
and
_No Signal Power Down_
+The TV will automatically turn itself off after 15 minutes when no signal is detected+

Similar Messages

Iphone 5 not restoring my back up data from itunes? Iphone 5 began freezing and turning off by itself after ios7 updates. How can i recover my data?

I began having problems with my iphone 5 after I updated to ios7. It began having several issues e.g. freezing, turning on and off by itself and the home button was not responding.
It is a long story because I had to talk to apple reps etc. to make a long story short; my iphone is now in recovery mode and only works when it is set as a new iphone.
Now my back up data on itunes will not back up into my iphone 5 and my iphone is still in recovery mode.
How can I restore my itunes back up data into my iphone 5?
How can I get my phone out of recovery mode?
How can I recover my potentially lost data, contacts, sms, etc., due to backing up my iphone and trying to fix the issues with apple reps?

ArmanG wrote:
Should I just let the energy run out and then plug it into iTunes and see what happens?
Might be a better idea to try ALL of the Basic Troubleshooting steps as already mentioned to attempt to resolve the issue.

IMac very slow after several hours of use, esp. when using Photoshop

Hi all,
I have a fairly new iMac (mid-2008 20" model) with a 2.4ghz Intel processor. I am a web designer and use this machine every day for my work. Several months after installing Adobe Creative Suite 3, I noticed that Photoshop was causing the cursor to jump and/or become jerky, as if the video card or processor were not keeping up with what's going on. This tends to happen after the computer's been in use for several hours or days after a restart. I have been following this in Leopard's Activity Monitor, and I noticed that Photoshop (being memory- and processor- hungry) taxes the processor more heavily than many other programs, which I expected. The strange thing, though, is that over time the Activity Monitor shows the "System" as taking up more and more processor capacity. I.E. when I first start up, the system is using 0-20% of the processor, the rest being available for the user; but after awhile, the system is requiring 50-90% of processor capacity, the result being that as soon as I switch into Photoshop from another program, the system is immediately overtaxed and starts moving very slowly (especially the cursor, as I said).
Now, here's the really strange part. As I said, this began happening a few months after I first installed Adobe CS3. I re-installed the software at Adobe's recommendation, and it was fine for another few months, but it began happening a few days ago, which is exactly the same time I shared a jump drive with a friend's worm-infected Windows XP machine. I know Macs don't get Windows worms, but is it possible that this thing has lodged itself on my system somehow and is causing it to run generally more slowly?
I appreciate any help you can give,
Nathan

Hi Nathan,
How much free disk space is available? Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is way better.
Not enough disks space could certainly slow your Mac down.
" but it began happening a few days ago, which is exactly the same time I shared a jump drive with a friend's worm-infected Windows XP machine. I know Macs don't get Windows worms, but is it possible that this thing has lodged itself on my system somehow and is causing it to run generally more slowly"
Mac can't read Windows files, so a file from the jump drive shouldn't be an issue unless you are running Windows on your Mac? via Boot Camp?
If you don't have a disk utility that can clear log and caches files, get TinkerTool available here;
http://www.versiontracker.com/dyn/moreinfo/macosx/11967
Check your boot disk for errors: Open Disk Utility, in the Utilities folder in the Applications folder.
Select your disk, and click First Aid.
Click Verify Disk.
If the disk needs repairs, do one of the following:
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Restart your computer using Remote Install Mac OS X. Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Carolyn

Safari freezes after several hours of use on Macbook pro

I just bought a Macbook Pro. When using safari, it freezes at least once a day to a point I can't force quit, and had to do a hard shut down. I've figured out that if I am using my computer and safari for more than a couple of hours, Safari just freezes. An apple support representative did mention that laptops were not meant to be constantly on, so I have been shutting it down when not in use. Still, I shouldn't have to shut down after an hour just to keep Safari from freezing.
Does this sound normal? Is there an easy fix? Do I need to look at getting this computer replaced? Or should I download a better web browser?
I'm also new to Mac, and thought switching from a windows would mean better reliability. So far I have been unimpressed with my computer. I just want it to work without worrying about having to force it to shut down once a day. Thanks for your help!

Does this sound normal?
No, of course not.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Randomly displays "Connect to itunes" after several hours of use.

Just bought this new 16GB 3GS iphone from a friend which is only one month old. He recieved it as a replacement from apple which worked fine for him. After inserting my sim card and restoring from backup apps and settings of my 2G, after about 5 hours of use it randomly displayed "Connec to itunes" screen. Connected to itunes and said it could not read contents of phone and to restore.
Restored iphone and setup new device this time and redid everything from scratch. Worked for about 5-7 hours this time and then did the same thing. Did another low level format and restore of the phone and this time it lasted 10 hours and displayed the same thing.
Anyone have any ideas of whats going on here? Did the restore from backup of my 2G cause something to be screwed up?
Thanks for the responses in advance!

Ok I've uninstalled everything relating to iTunes and apple from my winXP netbook and reinstalled iTunes with updated 9.2.1 and then updated the 3GS to 4.0.1
We'll see if the new iTunes update fixed 4.0 upgrade issues which claims it has and see if my phone lasts longer than 10 hours this time.

My iPhone has sudden turned off by itself after I press the button of upgrading IOS 7.5, I could not turn on my phone anymore.

How to turn on the phone?

Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

U430 turns off by itself after 8.1 update

So I've had this issue ever since upgrading to 8.1. I bought my laptop a few months ago with Windows 8 on it. Ever since updating, if I leave the computer with the screen open and walk away, I come back and it shut down! I cannot figure this out! I've looked in power options but it talks about going into sleep, not shutting off. I know when it's in sleep because the power button flashes slowly. Can anyone help me figure this out? Tired of walking back to my laptop and it being shut off. Luckily it boots quick but still, I don't want to have to open all my applications up again. Thanks.

i have the exact same problem , tried everything but still it happens , does somebody have an idea ?

IPad turns off by itself.

My New iPad turns off by itself after I lock it when my iPad is at 50% battery life or lower. I've already done a restore and this problem is still here. Any tips?

KimT.-
If it does need a repair, someone at a repair center would be able to test it and figure out what the problem is. I suggest you look for an Apple Authorized Repair Center. There may be one in your city. <Apple Authorized Repair Centers> <Another Option - For Country, choose “Show Complete Country List”>
Fred

T420 turns off by itself in the presence of magnetic field

Hi forum,
I am currently experiencing a problem where my T420 would turn off by itself when it is being used in an environment with the presence of magnetic field (something like a aluminium smelter). It only happens when the monitor is tilted at an angle other than 80~90 degrees. Could this problem have something to do with the lid sensor? Does anyone know where about the type of lid sensor a T420 has and the about location of it? Thanks in advance!!

Thanks for the reply guys!
I have changed the settings (both the power settings and the windows settings) of the lid close events to "do nothing". It stops the laptop from going to sleep mode however doesnt stop the screen from turning itself off. I supposed it is designed to turn off the monitor anyway because designer probably thought there is no point to leave the screen on if the lid is closed. Anyway what we will try now is to connect an external monitor and see if it solves the problem. I will update my progress.

Firefox becomes very sluggish after several hours of usage

In the past 2 weeks, after several hours of use, firefox becomes very sluggish. Cannot switch tabs easily. Cannot type emails easily, etc. If reboot computer, works fine at first, but again, after several hours, becomes sluggish again. This happens to both my computers which are on a network. A technician suggested a virus, but have not seen any virus messages. Use AVG 2013 virus software.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

My iPod shut off randomly and will no longer turn back on. I plugged it in to charge it, but after several hours it will not turn back on. What should I do?

My iPod turn off randomly. I plugged it in to the charger, and after several hours, it still will not turn on. I even plugged it into my computer and pulled up iTunes, where it showed up on the screen as plugged in, but still it will not turn back on. Any suggestions on what I should do?

- First try resetting the iPOd:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears
- Next try restoring the iPod via iTunes, first from backup and if still problem to factory defaults/new iPod.

My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!

My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!
it's bugging me since I don't know if it's recharging or not..

Mine has just done this too. Did you find out what it was?

Why does my ipod turn off by itself and then turn back on after up grading to ios 7

why does my ipod turn off by itself and then back on after upgrading to ios 7

Try the standard fixes:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result

I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Safe mode on start up does not work either...any ideas?

i tried it with both. i have since tried control+R, (https://discussions.apple.com/thread/3730727?start=0&tstart=0) which appears to be doing something but wont let me repair anything..

My mac turns off by itself several times a day

Since almost 6 months ago my mac is turning off by itself and then it restarts again. I've done an smc reset but it didn't help.
I really need to know what's wrong because my mac it's crashing every day!
This is my last report:
Interval Since Last Panic Report: 3656 sec
Panics Since Last Report:          8
Anonymous UUID:                    9D32F8E4-CAE4-3167-00D7-5B73CB1BC386
Sun Apr 14 17:46:00 2013
panic(cpu 2 caller 0xffffff7f913957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff808d95d000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff808d92ae60 : 0xffffff8010c1d626
0xffffff808d92aed0 : 0xffffff7f913957f2
0xffffff808d92af90 : 0xffffff7f914923b9
0xffffff808d92aff0 : 0xffffff7f9149242e
0xffffff808d92b060 : 0xffffff7f917b8c82
0xffffff808d92b190 : 0xffffff7f914b8fe8
0xffffff808d92b1d0 : 0xffffff7f9139d567
0xffffff808d92b280 : 0xffffff7f9139b05a
0xffffff808d92b480 : 0xffffff7f9139c983
0xffffff808d92b550 : 0xffffff7f9248a480
0xffffff808d92b690 : 0xffffff7f92489f6c
0xffffff808d92b6a0 : 0xffffff7f9244d868
0xffffff808d92b6b0 : 0xffffff7f9244d8dd
0xffffff808d92b6c0 : 0xffffff7f9242e95c
0xffffff808d92b700 : 0xffffff7f9243108c
0xffffff808d92b730 : 0xffffff7f9248414d
0xffffff808d92b7b0 : 0xffffff7f9246b308
0xffffff808d92b810 : 0xffffff7f9246bbe9
0xffffff808d92b860 : 0xffffff7f9246c13c
0xffffff808d92b8d0 : 0xffffff7f9246c8d1
0xffffff808d92b910 : 0xffffff7f9243834f
0xffffff808d92ba90 : 0xffffff7f92468e39
0xffffff808d92bb50 : 0xffffff7f92436de8
0xffffff808d92bba0 : 0xffffff80110650c9
0xffffff808d92bbc0 : 0xffffff8011066670
0xffffff808d92bc20 : 0xffffff801106408f
0xffffff808d92bd70 : 0xffffff8010c984a1
0xffffff808d92be80 : 0xffffff8010c20aed
0xffffff808d92beb0 : 0xffffff8010c10448
0xffffff808d92bf00 : 0xffffff8010c1961b
0xffffff808d92bf70 : 0xffffff8010ca5dd6
0xffffff808d92bfb0 : 0xffffff8010ccdd43
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f91338 000->0xffffff7f91645fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f912a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f91324000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f912e1000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 1653000->0xffffff7f91974fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f913 38000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f912a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f92425000 ->0xffffff7f924f1fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f913 38000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f91324000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f912a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f912e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000010a00000
Kernel text base: 0xffffff8010c00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 683809024960
last loaded kext at 37762890429: com.intego.iokit.BehavioralKext          1 (addr 0xffffff7f93678000, size 20480)
last unloaded kext at 247038774776: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7f91c3e000, size 65536)
loaded kexts:
com.intego.kext.VirusBarrier.AppBarrierKPI          10.6.17
com.intego.kext.VirusBarrierKPI          10.6.17
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.GeForce          8.1.0
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.nvidia.nv50hal          8.1.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

You have the MacBookPro6,2, the Edsel of Macs. You might be able to resolve the problem by reinstalling OS X. Try that first, if you haven't done so already. Otherwise, you may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
Print the first page of the panic report, and the support page linked above, and bring them with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.
You may be able to stop the panics by disabling automatic graphics switching in the Energy Saver preference pane, but that's not a solution.
Most likely, the logic board will be replaced. Sometimes the replacement is also defective, so be prepared for that possibility.

Toshiba 40L7335D turns off by itself after several hours of use

Similar Messages

Maybe you are looking for